Can we execute SU53 transaction in XI
Hi Experts,
Can we execute the su53 transaction in XI.
Regards
Santosh
Hi..
I think i didn't get your question. Are you asking is it possible to run the transaction in ABAP side of PI?? Then it is !!!
Regards
Suraj
Similar Messages
-
How can I execute FF_5 transaction ?
Dear gurus,
Can any one tell me, what r the steps should i have to follow run the FF_5 transaction.
I have a .940 format file with me, I want to upload this file to FF_5 transaction and i want to get a output.
Plz help me
Regards,
Chandrasekaran P PFF_5 allows you to upload the bak statement automatic.
Please insure following.
1. you should get two file from the bank one is header file and other is line file.
2. Header file is replica of FF67 transaction main screen where as line ite file is replica of ff67 line item details.
Regard's
Rj -
Hi,
I m new to EP.Soemone asked me like in SAP do we have transaction created in EP.
IF yes then how can we execute teh transaction.
Like in SAP we have SE91 where we creaet transaction adn execute those transactions similarly whetre can we create the transaction in EP and how do we execute them.
Thanks,
P007Hi Avinash,
You can't Create Transaction in EP but EP Allows us to create Trnx Iview. All that you can do is you can make the R/3 transaction display in EP.
Proceed the foll steps..
Login as Content Admin or ur EP usrid shd have Content Admn Role.
Content Admin -> Portal Content -> Migrated Content - > EP ver -> Iviews ( Rgt clk the Iview ->create New Iview -> Choose Trnx iview -> give available R/3 transx. )
After creating Clik the Preview bt and see ur R/3 object.
Later u hav to assign this iview into Page -> Workset and this workset has to be put inside the ROLE.
Rgds,
Jothi.
DO Award pts if this is helpful. -
Error while executing the transaction QC22 (Quality Certificate for Batch)
Hello Friends,
While executing the transaction QC22(Quality Certificate for Batch), after giving the Batch Number and Customer Number, when i am executing it , system is throwing the error message as "Not all data was found for characteristic 90139982 in profile D80D8".
Message no. ZQ010
Diagnosis
Not all data was found for characteristic 90139982, referenced as number 0030 in certificate profile D80D8. The missing data could be the short text, specifications, or results.
System Response
The missing charactertistic will not be printed on the certificate,
Procedure
Review the settings for data orgin of the short text, specifications, and results, and adjust accordingly.
One more thing i would like to add here as against the same batch in april we had taken the print of COA (Quality Certificate) through the transaction QC22. But now we are trying to do that than system is thrown above mentioned error.
As i am new in QM, kindly explain we were to maintain the certificate profile.
Waiting for the experts inputs.
Thanks and Regards,
Jitendra ChauhanHi
Try with QA33 you may have display authorization, or check in MB51 on the base of material and batch you can find the lot number generated, then go to QA03 and check the result, if you want to validate the characters check with the inspection plan, the characters entered in the inspection plan and the characters in the concerned certificate profile.
Regards
Naveen.
Edited by: vaddapalli naveen on Jul 1, 2010 1:57 PM -
Problem in executing FS10N transaction code -
Hi All,
I am executing FS10N transaction code, in selection criteria for company code, I have selected multiple selection tab. Here in ranges tab, I have entered " 01 to 32" Company codes range. Then I am receiving the following message "ONLY SELECT COMPANY CODES WITH SAME FISCAL YEAR".
I am sure that all the selected comapny codes are having same fiscal year variant.
Please advise me what is the problem and what should I do to rectify it.Hi chandra,
This problem occur because you had been posted documents for some company code with another fiscal year variant and changed afterwards.
Enter in OBY6: Utilities - Changed logs - Display status.
You can display companies codes balances with same document posting period. -
How to execute a transaction with a different user from the logged user?
Hello Experts!
I'm trying to find out a solution about this scenario: our users need to release a Purchase Order (ME28) and/or a Service Entry Sheet (ML85) in SAP from a WEB based application through TIBCO, but the requirement is to execute this operation with the same SAP User name of the user (with his authorization) and not with the TIBCO user that is logged to SAP.
Is there someone that could suggest me a real time solution and how to develop it? I really appreciate your contribute and I'm at your disposal for any further information.
Thank you very much!
AlessandroHi Rob!
Thank you for your help, but I can't apply this solution, because we need to execute the transaction with a specific user name and not a generic user, besides our user have different authorization, for example the user Mr. Rossi can release only his Purchase Order but not the PO of another user Mr. Bianchi. Moreover we need to see the PO released/modified from a specif user name. So this is our constraint.
Bye Ale. -
How can I execute a query from a BSP application?
How can I execute a query from a BSP application?
I´m trying to execute a Query from intranet. I´ve been looking for examples, but the templates I´ve found doesn´t help me.
does anybody has an example?
Thanks.Hi
Have you designed the BSP application ?
design it first with one page
page will have layout and Event handlers
Design the layout with the fields
in the event handler there are events
in the event On Initiailization or ON inputprocessing write the select query similar to what we write in routine ABAp and fetch the data into ITAB and that has to be passed to the Layout
see the doc
BSP
To learn how to create Web applications with Business Server Pages, you can work through the simple tutorials that build on each other. You should be able to run through all of the steps described here in your own system.
If you want to develop Web applications with BSPs, your system must meet the following requirements: Prerequisites for Creating Web Applications.
The following tutorials are available:
· First Tutorial: First Steps with Business Server Pages
· Second tutorial: A Small BSP Application and A Small BSP Application with HTMLB
· Third tutorial: Our First Online Bookshop
· Fourth tutorial: Further Developing the Bookshop
· A small Tutorial is also available for your first steps with the Model View Controller design pattern.
· For a more complex MVC tutorial based on the third tutorial, see: Our Little Online Bookshop Using MVC and HTMLB
When creating BSP applications, note the browser dependencies described in Note 598860.
steps:
1) start the transaction RZ10.
2) now u u have to select Profile name, so select the INSTANCE Profile from the list of options given with the Profile parameter list.U may find multiple instance profile in the list, so select the profile in which ur server name is given.
3) u will also find three options in the same window.
Administrator data, Basic Maintenance, and Extended Maintenance. So select the last one from that.
4) Now click on change button.
5) here u will find parameter icm/host_name_full, so now set it as FQDN.
6) Now copy ur settings with new version number.
7) Activate that version.
8) And now please restart ur WAS.
So this will set ur FQDN, and also don't forget to login using Admin User.
Now u also check for following service are active in your ICF setting or not,( just start transaction code SICF)
/default_host/sap/bc/bsp/sap
/default_host/sap/bc/bsp/sap/system
/default_host/sap/bc/bsp/sap/public/bc
/def ault_host/sap/public/bc
/default_host/sap/public/bc/ur
/default_host/sap/public/bsp/sap/public
/default_host/sap/public/bsp/sap/public/bc
/defaul t_host/sap/public/bsp/sap/system
/default_host/sap/public/bsp/sap/htmlb
if not then activate all.
check this link
Read this weblog...
/people/brian.mckellar/blog/2003/09/25/bsp-in-depth-fully-qualified-domain-names
http://www.thespot4sap.com/articles/SAP_WAS_Creating_BSP_Apps.asp
it consists of screen shots also
Check it.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
Regards
Anji -
Is it possible to execute a transaction by calling a irpt page?
Hi,
Is it possible to execute a transaction by calling a irpt page?
If possible, is there a sample code (.irpt code) for MII 12.1?
Thanks.You can use a SERVLET Tag in your irpt to execute an xacute query.
Here is the help file from 11.5 but this works in all the versions.
[http://help.sap.com/saphelp_xmii115/helpdata/en/Advanced_Topics/Report_Generation.htm|http://help.sap.com/saphelp_xmii115/helpdata/en/Advanced_Topics/Report_Generation.htm] -
Need to track Function modules called when executing a transaction
Hi All,
Is there a way through which i can track function modules called, while executing a Transaction. Kindly provide pointers to it.
Thanks in advance.
Regards,
Navin.Goto SE80 Transaction and use Program name for corresponding Transaction Use Find operation like Call Function .. then you will get list of FM ..
There is no other option .
reward Points if it is helpful
Thanks
Seshu -
Can we execute the BAPI in SE37?.
Can we execute the BAPI in SE37?.
Yes Satish. We can execute BAPI's via transaction SE37.
But for explicit commit we have to execute BAPI_TRANSACTION_COMMIT
To do so:
1. SE37.
2. Menupath: Function Module -> Test -> Test Sequences
3. In the popup screen, give the BAPI Name and then BAPI_TRANSACTION_COMMIT.
These FM's will be executed in sequence.
Hope this helps.
Kind Regards
Eswar -
SYNTAX_ERROR when executing any transaction
Hi All,
I am getting the following error as soon as I log in. I am not able to execute any transaction. The dump occured while I was applying Stack 10. The performance assistant ask to generate/activate the interface SAPLSRABAX_EXC using menu painter but I cant even get to SE41.
Any ideas.
Thanks in advance,
Shabnam
Performance Assistant:
Status LIVE of the user interface SAPLSRABAX_EXC missing
Message no. 00264
Diagnosis
The specified GUI status either does not exist or was not generated.
Procedure
Use the Menu Painter to check whether the status required actually exists. If it does, then generate the interface SAPLSRABAX_EXC (using the Menu Painter).
Runtime Errors SYNTAX_ERROR
Date and Time 07.04.2007 12:26:38
Short text
Syntax error in program "SAPLSEUF ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSHI1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLSEUF " in include
"CL_ENH_TOOL_FUGR==============CU " in
line 133:
"Method "IF_ENH_TOOL~COMPARE_WITH" is not declared or inherited in clas"
"s "CL_ENH_TOOL_FUGR" - - - - - - - - - - -"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error analysis
The following syntax error was found in the program SAPLSEUF :
"Method "IF_ENH_TOOL~COMPARE_WITH" is not declared or inherited in clas"
"s "CL_ENH_TOOL_FUGR" - - - - - - - - - - -"
Runtime Errors SYNTAX_ERROR
Date and Time 07.04.2007 12:26:38
Trigger Location of Runtime Error
Program SAPLSHI1
Include LSHI1U19
Row 23
Module type (FUNCTION)
Module Name STREE_RESET_INTERNAL_TABLES
Source Code Extract
Line SourceCde
1 FUNCTION STREE_RESET_INTERNAL_TABLES.
2 *"----
3 ""Lokale Schnittstelle:
4 *" IMPORTING
5 *" VALUE(STRUCTURE_ID) LIKE TTREE-ID
6 *"----
7 *
8 DATA: FUNCTION_MODULE LIKE TFDIR-FUNCNAME.
9 DATA: ACTIVE LIKE RS38L-GLOBAL.
10 *
11 CALL FUNCTION 'STREE_GET_FUNCTION_MODULE'
12 EXPORTING
13 STRUCTURE_ID = STRUCTURE_ID
14 * DATABASE_IDENTIFIER =
15 ACTION = 'IT'
16 IMPORTING
17 FUNCTION_MODULE = FUNCTION_MODULE
18 * DATABASE_IDENTIFIER =
19 * MESSAGE =
20 EXCEPTIONS
21 OTHERS = 0.
22 *
>>>>> CALL FUNCTION 'RS_FUNCTION_ACTIVE_CHECK'
24 EXPORTING
25 FUNCNAME = FUNCTION_MODULE
26 IMPORTING
27 ACTIVE = ACTIVE
28 EXCEPTIONS
29 NOT_FOUND = 1
30 OTHERS = 2.
31 IF ACTIVE EQ FALSE.
32 EXIT.
33 ENDIF.
34 *
35 CALL FUNCTION FUNCTION_MODULE
36 EXCEPTIONS
37 OTHERS = 0.
38 * reset also table with header information. This is necessary since
39 * the header is important for comparison with buffer data
40 CLEAR EXISTING_STRUCTURES. REFRESH EXISTING_STRUCTURES.
41 CLEAR STRUCTURE_TADIR_DATA. REFRESH STRUCTURE_TADIR_DATA.
42 * reset context resolution bufferHi Shabnam,
You are right .When a support pack is being imported in the system for performance reasons SPAM is set up so that by default no screens or ABAP programs can be generated..This needs to be changed if you want to work during an SP import.
Choose EXTRAS in SPAM initial screen choose SETTINGS and choose IGNORE GENERATION ERRORS.
It is better to avoid workign during a SP import on the system
Check the link for more details
http://help.sap.com/saphelp_nw04/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
*Reward points if the asnwer was helpful -
Execute a transaction in back ground
Hi,
How can i execute an user defined transaction in background
This transaction does not have an selection screen.hi rajitha,
try this code
hi
use this table
btcevtjob
and a sample code is also there
Try this
Execute the below program
tables: btcevtjob.
parameters: job like btcevtjob-jobname.
data: count like btcevtjob-jobcount.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
DELANFREP = ' '
JOBGROUP = ' '
jobname = job
SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
JOBCLASS = JOBCLASS
IMPORTING
JOBCOUNT = COUNT
CHANGING
RET = RET
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write:/ sy-subrc.
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
ARCPARAMS = ARCPARAMS
authcknam = authcknam
COMMANDNAME = ' '
OPERATINGSYSTEM = ' '
EXTPGM_NAME = ' '
EXTPGM_PARAM = ' '
EXTPGM_SET_TRACE_ON = ' '
EXTPGM_STDERR_IN_JOBLOG = 'X'
EXTPGM_STDOUT_IN_JOBLOG = 'X'
EXTPGM_SYSTEM = ' '
EXTPGM_RFCDEST = ' '
EXTPGM_WAIT_FOR_TERMINATION = 'X'
jobcount = count
jobname = job
LANGUAGE = SY-LANGU
PRIPARAMS = ' '
REPORT = ' '
VARIANT = ' '
IMPORTING
STEP_NUMBER = STEP_NUMBER
EXCEPTIONS
BAD_PRIPARAMS = 1
BAD_XPGFLAGS = 2
INVALID_JOBDATA = 3
JOBNAME_MISSING = 4
JOB_NOTEX = 5
JOB_SUBMIT_FAILED = 6
LOCK_FAILED = 7
PROGRAM_MISSING = 8
PROG_ABAP_AND_EXTPG_SET = 9
OTHERS = 10
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write:/ sy-subrc.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
AT_OPMODE = ' '
AT_OPMODE_PERIODIC = ' '
CALENDAR_ID = ' '
EVENT_ID = ' '
EVENT_PARAM = ' '
EVENT_PERIODIC = ' '
jobcount = count
jobname = job
LASTSTRTDT = NO_DATE
LASTSTRTTM = NO_TIME
PRDDAYS = 0
PRDHOURS = 0
PRDMINS = 0
PRDMONTHS = 0
PRDWEEKS = 0
PREDJOB_CHECKSTAT = ' '
PRED_JOBCOUNT = ' '
PRED_JOBNAME = ' '
SDLSTRTDT = NO_DATE
SDLSTRTTM = NO_TIME
STARTDATE_RESTRICTION = BTC_PROCESS_ALWAYS
STRTIMMED = ' '
TARGETSYSTEM = ' '
START_ON_WORKDAY_NOT_BEFORE = SY-DATUM
START_ON_WORKDAY_NR = 0
WORKDAY_COUNT_DIRECTION = 0
RECIPIENT_OBJ = RECIPIENT_OBJ
TARGETSERVER = ' '
DONT_RELEASE = ' '
TARGETGROUP = ' '
DIRECT_START = DIRECT_START
IMPORTING
JOB_WAS_RELEASED = JOB_WAS_RELEASED
CHANGING
RET = RET
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
INVALID_TARGET = 8
OTHERS = 9
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write:/ sy-subrc.
note: pre-requiste for doing this is execute the report and save the variant for the report which you need to execute in bg.
after doing this program execute it give a jobname for this.
then provide the report , variant and authcknam in job_submit FM.
*go to sm37
*enable the option scheduled
*and then enter the period for which u need to execute ur program in background providing necessary details such as jobname , time and date etc
With regards
S.Janagar -
JCO Call - Executing SAP Transactions
I'm trying to execute one transaction - providing the necessary input i.e. Creating a Service Entry sheet.
However, the return message indicated that it is erroneous - throwing the message "Service specifications in wrong structure".
Does this imply that the import parameters (tables etc) are somewhat wrongly input?
Anyone encountered this before?Hi
calling BAPI_ENTRYSHEET_CREATE.
passing in
Importparameter = ENTRYSHEETHEADER
TABLES = ENTRYSHEETACCOUNTASSIGNMENT, ENTRYSHEETSERVICES, ENTRYSHEETSRVACCASSVALUES.
When I commented out ENTRYSHEETSERVICES and ENTRYSHEETSRVACCASSVALUES, I can create the service entry sheet. So I am suspecting it's either these 2 tables that are giving me the problem. Yet to know what - we wont need to populate most values in those 2 tables no?
Thanks -
JCO Call - Executing SAP Transaction
I'm trying to execute one transaction - providing the necessary input i.e. Creating a Service Entry sheet.
However, the return message indicated that it is erroneous - throwing the message "Service specifications in wrong structure".
Does this imply that the import parameters (tables etc) are somewhat wrongly input?
Anyone encountered this before?Hi
calling BAPI_ENTRYSHEET_CREATE.
passing in
Importparameter = ENTRYSHEETHEADER
TABLES = ENTRYSHEETACCOUNTASSIGNMENT, ENTRYSHEETSERVICES, ENTRYSHEETSRVACCASSVALUES.
When I commented out ENTRYSHEETSERVICES and ENTRYSHEETSRVACCASSVALUES, I can create the service entry sheet. So I am suspecting it's either these 2 tables that are giving me the problem. Yet to know what - we wont need to populate most values in those 2 tables no?
Thanks -
How to execute ME22N transaction in background.
Hi experts,
How to execute ME22N and ME23N in background, when execute the transaction in background, , it should generate a spool, with out any printpreview. How can we do this....?
thanksHi,
Write a BDC program for updation of tables for u r user-exit.
After that Schedule u r program in back gound job scheduling.
Using SM36 - Define Background job.
Give the job name and Press job wizard button.
It's asking about job name and job class -prioritty.
press continue and give program name .
Select radiobutton based on u r requirement.
Then specify periodic job or only in holidays.
Then u select hours and all.
In SM37 give u r job name and and press execute.
Reward if useful.
Regards,
Narasimha
Maybe you are looking for
-
I want to set the value of "Keep the following number of major versions" in the versiong settings of a documnet library to a limit say 20 and then disable the option from the users so that they cannot them. Is it possible thorugh some custom coding?
-
I have two libraries on separate computers. If i turned itunes match on in both computers would the two libraries merge? So if my iphone normally syncs with my laptop would i still only get the iphones library or would i get both as one?
-
FF not keeping a constant connection
I've had this problem for about 2 months now. Give or take a few weeks. My Firefox Build 7.0.1 will not hold a constant internet connection. I will rule out possible stuff. Internet connection to my PC is constant with a 30 MB/s connection. Does not
-
How to enable delta in a generic Data Source
Hi, I am developing a Generic Data Source (Z) based on a view. How can i enable it to delta capable... What is the concept of Calanderday......timestamp....pointer How can i make a decesion (what factors do i need to consider) to go for
-
Is it possible without a self join
Hi oracle guru I have this query result expected is same but without using a join with t as ( select 1 job_id,'First a' mess,to_date('18:08:2010 13:54:21','DD-MM-YYYY HH24:MI:SS) jtime from dual union all select 2 ,'First b' ,to_date('18:08:2010 13:5