Can we export portal in Evalution version?
Hi All,
I have downloaded oracle 10g evalution version(10.2) from oracle network. I want to know can I export my portal from this version ? Beacause the script files required for export and import like contexp.cmd,secexp.cmd etc are not present in my portal directory. So is it possible to export from this version or i need to purchase copyright version?
Please help, its urgent.
thanks in advance.
Message was edited by:
[email protected]
Goto isn't ugly if you know what would like do with
it. You boys looks like you had restricted yourself
and can't imagine what with it. It will be nice to be
able to use labeled return as a Java goto.
g.draw(shape) could be viewed as a goto. It jumps in
code segment and only difference between goto and this
code is it could return.Correction: will return.
Restricted myself? I've programmed in languages with gotos. Do I miss it? Are there things I would like to do that I can't, without it? No. Is my code easier to understand now? Yes.
I would like to be able use
goto with signed "aplication" and clear warning to
user. This aplication use goto, use it with care.
Some AI problems are best with goto. Please elaborate. What is the relevancy of your application being signed? Are you saying that an end-user should be able to accept a signed application which may use unsafe programming practices, if he chooses to accept the risk?
Give me an example of an AI problem which is better solved using goto.
Similar Messages
-
I get the message that another version of LabVIEW 6.0 is already installed and it won't let me install 6.0. How do I get rid of the evaluation version?
I don't have LabVIEW in my Add/Remove Programs. I may have at one time, but
can't remember. The removal must have been incomplete becasue LabVIEW 6.0
says "Another version of this produce is already installed." The same thing
happens if I try to reinstall the evaluation version.
Ron
JeffD wrote in message
news:AJSO6.29900$[email protected]..
> Do you get an error when you try to un-install the eval version? I am able
> to successfully remove it, via Add/Remove Programs in Control Panel.
>
> Jeff
>
> "Raytheon Ron" wrote in message
> news:[email protected]..
> > How do I install LabVIEW 6.0 over the evaluation version? I can't
> > un-install the evaluation version.
> >
> > I get
the message that another version of LabVIEW 6.0 is already
> > installed and it won't let me install 6.0. How do I get rid of the
> > evaluation version?
>
> -
Hi,
I tried replacing the existing OC4J by the new version i.e. 9.0.3 as this fully supports JMS. In place of orion.jar we have oc4j.jar in j2ee/home. After installing and starting OC4J (using java -jar oc4j.jar I get the appropriate message that Oracle9iAS <9.0.3.0.0> Containers for J2EE initialized), but my emwebsite is down since then and I cant access the portal. Infra also went down but after restarting the services it is now up. How can I restart portal services and its EMwebsite?
Regards
ParasThis cannot be done with a portal/wireless or BI install type. There are a few TARs on this.
-
How can I export a project on an external drive in the latest version of iMovie?
Before the latest release of iMovie I easily managed to export a project on an external usb drive and re-import such project on a different Mac... In the latest iMovie version, however, I cannot see my drive any more..
So, how can I export a project on an external drive in the latest version of iMovie?
Thank you in advanceI'm not sure this is the best way, but you could create a new iMovie Library, move your project to that Library, then close the library. Then move the Library to your USB drive. Then, on the other Mac, in iMovie open the Library.
-
I am trying to convince my company to send me to purchase labview and send me to classes for labview.
I am trying to put together a small demo for them using the Labview 7 express evaluatin copy that I recieved.
What I am wondering is how can filter out everything besides the valley peaks on a sine wave.
What I am trying to accomplish, is create an example showing that Labview can sameple from a sine wave, read about 5 "valley" points of the wave, evaluate these based on a value that i can define, and signal pass or fail.
attached is a picture of what i have so far
Ryan
LV 7.1
Attachments:
progress.bmp 3841 KBHi,
I built a VI using LabVIEW 7.0 that detects the valleys in a sine wave. It uses the 'Peak detector' VI that I believe is available in the evaluation version.
(Functions palette >> All Functions >> Analyze >> Signal Processing >> Time Domain >> Peak Detector)
I have attached a VI as well as the screen shots its front panel and block diagram.
I hope this helps.
Sincerely,
Feroz
Attachments:
valley_detector_bd.jpg 36 KB
valley_detector_fp.jpg 72 KB
valley_detector.vi 29 KB -
How can i export excel 2003(Version 11) from Crystal Report 8.5
how can i export report to excel 2003(Version 11) from Crystal Report 8.5
We i can only see below formats
Acrobat Format (PDF)
Character-separated values
Comma-separated values (CSV)
Crystal Reports (RPT)
Crystal Reports 7.0 (RPT)
Data Interchange Format (DIF)
Excel 5.0 (XLS)
Excel 5.0 (XLS) (Extended)
Excel 7.0 (XLS)
Excel 7.0 (XLS) (Extended)
Excel 8.0 (XLS)
Excel 8.0 (XLS) (Extended)
HTML 3.2
HTML 4.0 (DHTML)
Lotus 1-2-3 (WK1)
Lotus 1-2-3 (WK3)
Lotus 1-2-3 (WK5)
ODBC - AddressBook
OBDC - CRGUP
OBDC - CROR8V36
OBDC - CRSS
OBDC - CRXMLV36
ODBC - dBASE Files
ODBC - Excel Files
ODBC - MS Access Database
ODBC - Visio Database Samples
ODBC - Visual FoxPro Database
ODBC - Visual FoxPro Tables
OBDC - Xtreme Sample Database
Paginated Text
Record style (columns no spaces)
Record style (columns with spaces)
Report Definition
Rich Text (Exact Format)
Tab-separated text
Tab-separated values
Text
Word for Windows document
XML
there is no format with "Microsoft Excel 97-2000 (XLS)"
what should i do? -
Can you export your files with the Trial Version??
I've been into the help section, and it says to go to Share and then export ect ect, but when I clicked share, I can't click any of the options (theyre that light grey). I REALLY need to be able to export with this trial version I have, and soon. Please help!!
Click in the timeline window to make sure it is the active windqw. The most common cause for grayed out share menu options is if you have the browser as the active window.
-
Can i upgrade to windows 8.1 enterprise from 90 day evaluation version
can i upgrade to windows 8.1 enterprise from 90 day evaluation version? as our company has volume license key for win 8.1 enterprise purchased
yes you can.
Skip Product Key Input in Windows 8.1 Setup
To achieve our objective, we need to edit the ei.cfg (edition configuration) file present inside the
/sources folder of the ISO image. All we need to do is to provide the version details inside this file so that Windows Setup is not needed to ask for a product key to install the appropriate version relevant to that product key.
If you are going to install Windows 8.1 using a USB drive, transfer the installation files to the USB and then proceed to step 2. On the other hand if you need to create a DVD, open the ISO using a utility such as MagicISO so that the structure is not affected.
Browse to the /sources folder.
Look for the ei.cfg file and open it in a text editor such as Notepad or Notepad++ (preferred). If the file doesn’t already exist, create a new text document and rename it as ei.cfg
Now amend the file depending on the version which is included in your particular copy and the version which you want to install. For Professional edition which will be the best bet for most of the users, paste the following context into the
ei.cfg file. Make sure that anything that already exists in the file should be cleared first.
[EditionID]
Professional
[Channel]
Retail
[VL]
0
Save the file and run the Windows 8.1 setup again. The setup will not ask for the Product Key anymore.
This is not a hack or anything illegal. The configuration above is supported by Windows installer and is well documented by Microsoft and can also be used on some other versions of Windows as well. -
If I imported proxy media to edit in fcpx, can I export a hight resolution (apple pro res 422 (hq)) version of the project ?
OK, let me re-answer here. You HAVE to have either original or optimized media, you can not have Proxy only media, when using FCPX's inport options. You will switch between which FCPX is using; in 10.1 via the Canvas menu option called "Media", or in 10.0.9 and earily via the Preference's "Playback" settings.
When set to Proxy, FCPX only references that medai, which is 1/4 resolution, and not full quality. When set to Original Or Optimized, you'll get full resolution output, as FCPX is not referencing those files.
The only way to have Proxy only media is to convert it in Compressor and then import that. And that would just be a huge mistake. -
How to activate evaluation version of SQL server
How to activate evaluation version of SQL server 2012 with open license.
in the VLS portal it is saying no product key is require. but my problem is i already installed evaluation version of SQL server 2012 and configure many things to it. after that i got open license from Microsoft,Hi,
If you want to upgrade ( i Guess this is what you want) evaluation edition to enterprise or standard you need to run Ent/ standard edition from setup.exe installation window will pop up on that select maintenance on left side and then select edition
upgrade.
Take help of below link
http://blogs.technet.com/b/sqlman/archive/2010/03/16/sql-server-2008-upgrading-to-standard-enterprise-edition-from-evaluation-edition.aspx
revert if any issue.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Can't Start Portal After Install
After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the same message.
What password should I use to start the server?I've followed the directions and am experiencing the exact same problem. Brand
new installation of Weblogic server 6.1 SP2 with examples. That install is working.
Then added Portal 4.0 SP1, updated the license file and I have the same issue
with the Illegal access exception resulting in the "Fatal initialization exception"....
Hmm!
[email protected] (Bowrat) wrote:
Below listed are the common errors you run into during installation
process:
- You need to have the correct version numbers of both the weblogic
server and the portal server. For instance the portal server 4.0 (eval
copy) will only run on WebLogic 6.1 SP1. So check the edocs for
supported platforms
- Make sure you have the installed the full version of the weblogic
server (including examples)
- Finally, you need to run the UpdateLicense.cmd file to update the
license.bea under ur Bea Root
Give it a shot after u have checked all of the above three - goodluck
- Bowrat
www.Bowstreet.com
Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
From: Steve Anderson <[email protected]>
Newsgroups: weblogic.support.install
Subject: Can't Start Portal After Install
References:
NNTP-Posting-Host: 209.11.114.150
X-Original-NNTP-Posting-Host: 209.11.114.150
Message-ID: <[email protected]>
Date: 13 Feb 2002 20:25:53 -0800
X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
Organization: BEA SYSTEMS Inc
Lines: 18
XPident: firewall-user
Path: newsgroups.bea.com!209.11.114.150
Xref: newsgroups.bea.com weblogic.support.install:9600
After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the samemessage.
What password should I use to start the server? -
Can't export iMovie 10.0.1 to Vimeo or anywhere else
Just started using iMovie 10.0.1 and can't export or share a thing. Get rendering error 50 when trying to upload to Vimeo (and this ia a small file too).
Just as a side note, I've been using iMovie for well over 5 yrs but this is the first time I've ever experienced continual problems using an Apple product. I don't know why they took a successful software, changed it and in doing so, ruined it.
So my question to all you smart people out there is how does one export without experiencing rendering error 50???Let me make sure I understand correctly what you're doing:
I'm assuming you have the latest version of itunes, correct?
When you connect your phone to itunes, do you get any pop ups? If you do, click cancel. Click the button, check for update, is this where you're getting that error message? Are you on a windows pc or a mac? If you're on a windows pc, make sure BEFORE you connect your phone that you disable your anti-virus software, turn off your firewall, disable any malware software & see if that will let you upgrade. On a 3gs, to install any firmware(assuming you're running the latest version of itunes), itunes HAS to contact apple's servers. -
Can't export iMovie to camera roll on iPad Air
I can not export an iMovie to my camera roll. When I select 'save video' the box that says 'exporting video' appears but never loads
I'm using my iPad Air version 7.1.2, iMovie 2.0. I have 41GB of free space.
The 14 min movie includes video (shot on a Canon camera), photos (taken on a Canon camera) and songs (purchased on iTunes).
I've read that you need to tick iMovie in settings/privacy/photos - however iMovie does not appear as an option
iMovie is ticked in settings/privacy/location services
I have successfully exported the movie to iTunes and have saved this iMovieMobile file to my PC - this file is 3GB or so in size
The movie plays perfectly in iMovie however I want to export it to play on a PC, TV etc. Please help!
Any tips will be greatly appreciated!
pippasnippaI am having the exact same problem someone please help?
-
When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
I've tried rebuilding the thumbnail database, but that hasn't helped.What version of iPhoto and system are you running?
Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left. Does that let more than one photo display in the window?
OT -
How can I export Discoverer reports automatically from within PLUS ?
Hi,
I want to export Discoverer Repors it to PDF file. I can manually export my report as an PDF file, Now I would like to run this report and export the
PDF once a day automatically. Has anyone done something like this on
a Windows server?
I am using Discoverer (Oracle Discoverer 10g Release 2 (10.1.2.1), there is no Desktop version anymore, so I am using PLUS version, how can I apply this through PLUS version.
Any help.
Thanks,
HaniDo NOT attempt to use CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD. This class and method is for use through the SAPGui and will NOT work within BSP. This information is completely incorrect!
There are lots of existing Weblogs on this subject. Have a look through them for solutions that do work.
/people/thomas.jung3/blog/2004/09/02/creating-a-bsp-extension-for-downloading-a-table
/people/thomas.jung3/blog/2004/08/09/bsp-download-to-excel-in-unicode-format
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
Maybe you are looking for
-
i am using the latest version of itunes. and running ios7 on my iphone 5s. Thank you for the help
-
Hi All, After fiddling this for almost a week, I finally come in seek of assistance and advice. let me explain my requirement as clearly as I possibly can. before you even proceed further, please make sure you a aware of the following: importing xml
-
CRM Interactive Reports Activation
Hi All We need to activate de Interactive Reports in CRM But we don't know what to do with the BI Client. BI Cliente is a BI product Installed in the Same Sever, but in different Client? Or we just have to customize the the Analytics part in CRM? Our
-
Trying to add a .tif image to a collection and when I drag the image into the collection, instead of the tif file appearing (as I want), the .nef (raw) image appears instead. What am I doing wrong? I want the .tif version in the collection. Thanks.
-
Semantic Partition in DSO BW7.3
Hi experts, I am working with Bw7.3. I would like to know if I do a semantic DSO partition by year or plant, which option do I have if for example appears a new plant or begins a new year that I do not have in my DSO. Does it exist a automatic proces