Can we get a feature list for the next update?

I'm early in the planning stages for a project and am wanting to make a decision on what Stage3D framework to use. We're not opposed to putting in the extra effort to build from the ground-up but so far I'm loving Proscenium. Unfortunately, and understandably being at the stage it's at, there are a lot of features missing that we're going to require. Is it possible to get an upcoming feature list of what we can expect with the next iteration to help us make a decision?

I am in the same situation, and many other developers do as well, so I guess it would be of fundamental importance for the success of this project to answer these questions as soon as possible.
Thanks and keep up the very good work.

Similar Messages

Can you please make an option for the next update to leave group chats

Can you please make it so that we can leave group chats when we want

This is a user t user forum. No Apple Development representatives are here.
If you wish to give feedback to Apple use the feedback page.
http://apple.com/feedback

I would like to update my eMac from 10.4.11 to 10.6. How can I get this os version for the update?

I would like to update my eMac from 10.4.11 to to 10.6.x How can I get this os version for the update?

Highest an eMac can go is 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Trouble is appl no longer sells it, you have to search eBay & such for the full retail version, not any grey Install Disc.
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.

TS1718 I can't get iTunes to simply play the next song on the list

I can't get iTunes to simply play the next song on the list. It simply stops after playing one song.

That's consistent with all the tickboxes to the left of the tracks (in Song view) being unchecked.
Go into Song view and Ctrl-click (on Windows) or Command-click (on Mac OS) one of the empty boxes to do a "global recheck".
If you can't see the tickboxes, head into your General preferences tab and select "Show list tickboxes" as per the following screenshot (it's for an earlier version of iTunes, but the boxes are in roughly the same place in the recent versions 11.x):

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

I keep getting this error message: ITunes was unable to load data class information from Synch Services. Reconnect or try again later. What does that mean? Can I fix it? or do I have to wait for the next update?

See TS2690: iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert.
tt2

I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?

I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?

There is no serial number and you don't need one. What you need for a subscription is to SIGN IN within Acrobat, so it knows the subscriptions you own.

Where can I get an EPSON printer for the original iMac?

Where can I get an EPSON printer for the original iMac?

You should look for an Epson Stylus Color 740 or the higher-end 900 or 980, which are about 12 years old now. All have USB connectivity, and while the 900/980 is a better/faster printer, it's harder to find the ink tanks for it at the usual office supply stores. Ink tanks for the 740 series seem to be more readily available, without a special order. There were Mac versions of these printers (the 740i and 900i), with blue/ice housings that were color-keyed to match the fruit-colored "blueberry" iMac and Blue & White G3 mini-tower. There was no Epson printer that was color-keyed to the original Bondi Blue iMacs.

Any chance you guys are working on vector support for the next update?

Any chance you guys are working on vector support for the next update? It would definitely make working with these retina displays much easier.

While waiting, there's this manual solution i proposed here : http://fr32c.free.fr/Am/index.php?post/2013/09/12/Muse-Inline-SVG but you'll have to translate the article. At the bottom are some files to test.
And i demoed it : http://fr32c.free.fr/Muse/Muse+inlineSVG/

Can you get wireless hard drives for the new ipad as apple again havent increased the size

someone has mentioned that you can get wireless hard dives for the ipad.....this would be beneficial as yet again apple have not increased the size of the maximum hard drive of their new "soon to be released" ipad.....thanks Lee

The wireless "drives", which are more truly media streamers rather than true file storage, continue to be an optiono for the new iPad just as it was for the previous versions. Confirm compatibility with iOS 5.1 before purchasing, just in case the product might need an update for the new version of iOS.
Regards.

Where can I send in an idea for the next iPhone (or anything) to Apple so that they will take it in consideration and hopefully use it?

I came up with a really amazing and helpful idea for the next generation Apple products!

http://www.apple.com/feedback/
http://www.apple.com/legal/policies/ideas.html

Recommendations for the next update

Here's a few changes I was anticipating, but didn't make it in the 10.2.1 release, but hopefully will make it into the next update:
1. The Work-Personal separation is an obstacle for screen captures. I can be taking a screenshot of SMS msgs and it goes into the Work Space. I can't attach it to a text or personal email. So, the workaround is to email it from my business email to my personal email and then attach it to a text! This is something that obviously can be done with work documents and files to circumvent the separation in the device. Perhaps BlackBerry should offer administrators the option to remove the segregation of work and personal spaces.
2. The camera remains problematic, particularly in dimmer environments, and it is not as "forgiving" as other camera phones when it comes to stability/blurriness.
3. We need the "You were bcc'd" warning restored to the top of emails. We currently get the "You were cc'd" notice, but the more critical bcc is still absent -- and that's the one that's needed to avoid accidental/embarrassing "reply to alls."
4. Voice Control button is still shared with the "Period" button. Too small for those of us with above-average hands/fingers sizes! Also, rather than silence, a beep to acknowledge voice activation would be helpful.
5. Option to permit Z10 users to type in the Contact name into the Phone's dial pad field as the Q10 allows. I know it's a different interface, but a toggle button may help.

also no need to unlock the device to make a phone call
Click on the thumbs up if you like the reply

How can I get a printable list of the web sites in a tab showing both the name of the site and it's location?

I use tab groups for specific projects and would like to print/save a list of the websites used on each project. Using the list function on a tab group produces a list of the web-sites which can be printed/saved via PrtSc and Word. How can the web-site addresses be included? With this list available I would then close the tabs.

Someone might have created an add-on for this, although I didn't find one in a search.
Could I suggest this workaround for now:
(1) Use the Bookmark All Tabs feature (right-click a tab when your tab group is displayed) to save all tabs to a new folder on the bookmarks menu. Some tips in the "How do I bookmark all of my open tabs?" section of this article: [[How to use bookmarks to save and organize your favorite websites]].
(2) Export bookmarks to an HTML file. Unfortunately, this will be all bookmarks, not just the ones you want, but hang in there. This article has the steps: [[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]].
(3) Open the exported HTML file in Firefox or your favorite WP program. Now you can either:
(A) Copy/paste the live links for your tab group into your preferred form of archival storage. Or
(B) Print (e.g., select the relevant bookmarks and use the Print Selection feature). However, in order to show the URLs, you need to hack the page a little bit.
(i) In Firefox, you can run a little script in the Web Console on the bookmarks page. Press Ctrl+Shift+k to open the web console. Copy the following line of script, then paste it next to the caret (">") in the web console and press Enter. The URLs should appear after the links.
for(var i=0; i<document.links.length; i++) {document.links[i].parentNode.appendChild(document.createTextNode(' ['+document.links[i].href+']'))}
(ii) In Word, there probably is a macro to split the hyperlink fields into the display text and URL. If Word is your preferred tool, I'll see whether I can write one.

Where can I get a replacement battery for the iBook G3 Clamshell M6411, in the UK?

I recently managed to source an Indigo iBook G3 clamshell - the M6411 FireWire model - from eBay.
It's in superb condition, but the battery has had it, and only holds about 5-10 minutes' charge.
Can anyone suggest where I can get a replacement? I guess I just assumed it would be easy, but everywhere I look online they're either sold out or cost a fairly large amount of money - I paid £50 for the laptop, which was a pretty good deal, and had hoped to get a battery for under £30 (as I've bought similar replacement batteries before for other laptops).
Also, are all the G3 Clamshell batteries the same? Or do the different models have different batteries?

Some items come up in a search for Mac parts UK; whether or not they have
an exact part match for any vintage product has not been searched...
Most that I have looked into, show any battery "out of stock" &/or listed "used."
A good electronics shop with an understanding of how these batteries are wired
in their case (and any controller chip circuitry) should be able to install new cells
inside the case; however opening these may present a problem if done forcefully.
http://www.thebookyard.com/
http://www.applemacparts.co.uk/store/index.php
http://www.theappleshack.co.uk/
In the US, wegenermedia.com, powerbookmedic.com, & others may know of stock.
So far, I'd struck out searching; could be one may need to contact long standing
Apple specialists & those who repair vintage models, to get refurbished batteries.
Perhaps there is a message board or User Group site where one could try & contact
Apple users; of those some may know of a source, or an individual capable of repair
since these battery units have been refurbished before with new rechargeable cells.
Sorry to not be of exact help in this matter.
Good luck & happy computing!

Where can I get a pin diagram for the BNC-2120 DAQ Boaard?

I am using a NI BNC-2120 DAQ Board and a couple of the pins seem to have been damaged. I was looking for a pin diagram to so that I can check to see what these pins correspond to and if they could be contributing to some of the unusual readings we are getting.

I'm assuming that the damaged pins you are referring to are on the back of the connector block where the cable plugs in.
The BNC-2120 Accessory is able to be used with several different families of data acquisition products, and therefore the meaning of the pins could possibly depend on which particular data acquisition device you are connecting to the BNC-2120.
You can find many of the generic pinouts for E series 68-pin devices in the DAQ-mx Help:
http://digital.ni.com/manuals.nsf/websearch/95ADFF85ABA7853986256D8800668AE2?opendocument
If you are using an M series device, the following lists its corresponding pinout, which is nearly identical:
http://digital.ni.com/public.nsf/allkb/61ED77983AD7CCA386256F66008215F1
If you let me know which device you are using and which pins you suspect are damaged, I could give you more information on what effect it might have.

How can I get a printer driver for the hp psc 2410 photosmart?

When I tried toadd the printer, there was a message saying that the printer driver for the 2400 series was available, but when I tried to download it, I received an error message saying that I couldn't download it because of a network error. My Macbook is not on a network at the moment. How can I get the driver so I can print?

You can also install this update directly (not through app store):
http://support.apple.com/kb/dl907
If you want us to help more, you will need to give us more detailed info. "It didn't work" leaves me wondering exactly what you've done so far.
For example, after clicking Add/+ and selecting the printer you want, have you waited for a full minute for the Mac to find the driver
- OR -
when it starts searching for driver, have you tried going to the pull-down menu where it says "Use: Auto-select," and choosing "Select Printer Software..." to make a manual selection?

Can we get a feature list for the next update?

Similar Messages

Maybe you are looking for