Can we get PO confirmation message in MD04?

Hi All,
i have got a requirement from my customer. please help me know how it can be done in SAP.
Customer wants that once buyer gets a confirmation regarding a delivery & it is updated in the confirmation Tab at PO level, then after MRP run system should give a message in MD04 that this PO is confirmed.
could you please let me know if we can do it in SAP & how?
any help on this will be highly appreciated.
regards,
anubhab

FOr confirmed PO's MD04 shows a differrent MRP element ShpgNt ( Notification) & that can be easily seen by all buyers/ MRP controllers.
Also you will need to try to setup email to MRP controller under activate workflow for mail to MRP controller
Hope this helps. Good Luck
Thanks,
Ram

Similar Messages

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

How can we get a alert message in the current browser we are using the mom

how can we get a alert message in the current browser we are using the moment we have entered some data in
the table...
I need a popup alert the moment a new record is added in a table... in apex database is 11g xe..
The idea is I am using a apex application. .The moment new data is added in the table ..I am alerted by a message window..that a new record has been added...
Thanks
Edited by: pauljohny on Jun 11, 2012 10:23 AM

pauljohny wrote:
how can we get a alert message in the current browser we are using the moment we have entered some data in the table...
"Current browser"? When viewing anything, or just when using an APEX app?
Ans .. Just when using apex app....even if the apex app is minimised ..The current browser will be the one where I am using apex app...
What i am looking for some scheduler .. to check ..in the table every 5 minute for change if there is a change..then a popup alert be shown...
Split it into [at least] 2 components, database and browser. I'd expect someone calling themself a "DBA Architect" to have some ideas about the database side of things, even if not clued up on JavaScript and AJAX?
I dont think its a database isssue... When i say to check every 5 minutes ..it could be easily done via dbms_scheduler ...I am having issue in getting the popup alert message...
in apex... Dont know wether there is a plugin like modal window(available from skill builder) which shall help in this scenario,.Or might be have to use java scripting and ajax ..
and if it is that (Java scripting and Ajax) .....then shall have to be familiar with java scripting and Ajax...and this shall be a bit time consuming..
Had a feeling this could be accomplished via java scripting and ajax.. ...but still looking for some easy way..

When I turn on messages, I can't see my messages. All I can see is a screen with horizontal lines and a text list of addresses. How can I get the regular message screen back?

When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?

The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?

I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

Can I get my iPhone messages on iPad?

Can I get my iPhone messages on iPad?

Only if they are iMessages. iMessages is an Apple service between Apple devices only.
You cannot SMS messages sent from non Apple devices on an iPad.

My phone was stolen - can I get my text messages back?

my phone was stolen - can I get my text messages back?

Not unless you backed up the phone before it was stolen.

How can i get started with messaging in java

how can i get started with messaging in java

If you're talking about writing mail clients in java, you might want to start with a better forum. We're focused on Messaging Servers, here. Unlikely you'll get any Java programming from us.
If you're talking about Messaging Server, start by downloading the software from sun.com/downloads.

Can not get mail and messages from old phone to my new phone

can not get my mail and text messages transferred from my old Verizon Droid x2 to my LG Optimus what's the process

lock321, Let's get your information transferred! Text messages do not transfer from device to device unless you have backed the text messages up with an application on your Droid X2. Do you recall backing your text messages up using our Verizon Cloud http://vz.to/1BkRU5Tor another 3rd party app? Emails usually transfer over once you add your email account information into the LG Optimus. http://vz.to/1BkRYCK
TanishaS1_VZW
Follow us on Twitter @VZWSupport

How can i get the error message from the thrown/raised exception?

DB version:10gR2
Examples for this thread taken from
Want Stored Procs to get exectuted regardless of preceeding SPs Success or
I have a package with several functions and procedures inside.I created a caller procedure called callProcs, which will execute various procedures within the package in the appropriate order.
In the below example i cannot get the error message thrown from line 20
create or replace package body mypackage
is
variable_proc1 number;
variable_proc2 number;
variable_proc3 number;
v_result       number;
my_exception   exception;
procedure proc1
is
begin
select 8/0 into variable_proc1 from dual;
exception
          when others
          then raise my_exception; ----line 20
end;
procedure proc2
is
begin
select 1 into variable_proc2 from dual;
exception
          when others
          then
               null;
end;
procedure proc3
is
begin
select 3 into variable_proc3 from dual;
exception
          when others
          then
               null;
end;
Procedure caller_proc
is
begin
proc1;
proc2;
proc3;
v_result:=variable_proc2+variable_proc3;
dbms_output.put_line('The output is '||v_result);
exception
          when my_exception
          then
dbms_output.put_line('Heyyyyy the error is '||SQLERRM); -- exception caught at line 64 of caller proc
end;
end mypackage;
When i try executing the caller proc, i don't get the error. Instead i get the text User-Defined Exception as shown below
set serveroutput on
exec mypackage.caller_proc;
Heyyyyy the error is User-Defined Exception
PL/SQL procedure successfully completed.Edited by: user10633418 on Mar 10, 2009 11:30 PM

Thank you justin.
Sorry my earlier post was a bit ambiguous.
I wanted the error generated at proc1 to be captured at caller proc's Exception handling section (line 64) so that i could log the error to an ERR_LOG table.
I can actually log this error at proc1 itself like
exception
when others
THEN
error_message :='My custom message for the particular proc '||SQLERRM;
dbms_output.put_line(error_message);
logerror(error_message); --an autonomous error logging proc
raise;But there is a RAISE statement in proc1's exception handling, so the exception gets propogated to caller proc's exception handling section {color:#ff0000}*and another redundant row will be created at ERR_LOG table for the same error because there is a*{color}
logerror(error_message);--an autonomous error logging proc
in the WHEN OTHERS section of exception handling section of the caller proc
I want to avoid the creation of this redundant row in ERR_LOG table.

HT4847 How do I unlock my ipad. It Wants me to back up icloud but can't get rid of message to try

My ipad is showing a message that advises icloud has not been backed up for 2 weeks and the ipad needs to be plugged in and charging to enable back up. However, I can't get rid of the message so that I can turn on wi-fi and start back up. This has happened to me before and I ended up having to pay a one off fee of £25.00 for advice to clear the message that was quick to do. Can't remember how to do it though. Does anyone know how to unfreeze the screen please? I have tried holding the wake up button but that just brings up the swipe to power off screen, which does not react to a swipe. Please help.

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release. This just restarts it, you won't lose any data by doing this.

How can I get my old messages back?

I'm using my iPad to skype and I need to get my old messages of like one year ago back. Is there a way to get them back? Like doesn't skype have a server where all the messages are stored? If it is so, could I email them and ask for the list of the old messages?

Hi, Can anyone help me on how to get old messages back,,,,,,,say a year or so ago...?
please skyp your answer to ..[Removed for privacy]
Thanks

How can I get my email messages to open in one click with Mail app?

Hello,
How do I get my email messages to open with just one tap? On my newer Macbook I just click once on the Mail app and my messages open automatically but on the Powerbook it takes two clicks. Can this be fixed to just one click? I've gone into preferences but can't seem to change it.

Carolyn,
Thanks, I was wanting to just click once on a message and have it open right away and then be able to quickly go through my messages. I found the solution from another helpful Mac user. You just move the separator bar that divides your messages from the view pane and move it up and it works like a charm.

How can I get the printed message of stored procedure in JPA

Hi, I'm using JPA to invoke stored procedure in database, a segment of the sproc is like below:
if @create_type != 'a1' and @create_type != 'a'
     begin
     print 'create type must be either ''a1'' if you pass in A1 ID, or ''a'' if you pass in User ID'
     select 0 as "Result"
     endI can get the 0 as the result, it means business operation failed currently, but how could I get the message of 'create type must be either ''a1'' if you pass in A1 ID, or ''a'' if you pass in User ID'?
That information is important as it indicates why the operation failed.
Thanks

how can i get rows count returned by stored procedure in oracle sql developer?
Procedures do NOT return a value - functions return a value.
A procedure executes whatever code it contains. That code could contain many queries that produce many row counts.
Does your procedure take one or more IN, OUT or IN OUT parameters?
See example 8-1 for an example of executing a procedure that has an OUT parameter.
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/subprograms.htm#CHDBIEEE

Can't get Send Video Message under conversation tab to be black

Put in new contact and when I try to video call can't get thru...I see under the conversation tabb that Send Video Message is greyed out. How do I get it to black to be able to send a message?

It seems to be an ongoing issue the last couple of days..there's a few posts already discussing it in the forum. I found that if I sent the photos from my verizon acct on the iphone, it uploaded to the gallery fine..so it's a .mac account problem i think. Try it through another acct and I don't think you'll have a problem. It had always worked fine for me sending from my mac account until this weekend.

Can we get PO confirmation message in MD04?

Similar Messages

Maybe you are looking for