Can we get Transformation rules while activating Business content

Hi Gurus,
I am trying to install business content for the cube 0SD_C05 in BI 7.0. I have selected in dataflow before and afterwards, but I am getting that as Bw 3.X flow like update rules and tranfer rules. Is there any option that I can get the business content installed in BI 7.0 flow, like I need the transformation rules and all.Please advise.
Kind Regards,
Raghu

Hi,
While activating the BI content it will ask for the Datasource type to be extracted.There you need to specify in 7.0
Now as you have extracted,you can migrate the same.
Go the datasource>rt clk>migrate>with export>after migration>replicate the DS>activate and create transfor mation...
Hope this helps
Cheers,
Shana

Similar Messages

  • Error while activating Business Content

    Hi!
    I'm trying to activating a BC ODS.. but when I run the installation simulation I get the following error message:
    "InfoObject 0KN_USE is not available in version A"
    I've marked the infoobject 0KN_USE to be installed..
    Any ideas of how to proceed?
    BR
    Bjørn

    Maybe that infoobject existed before in inactive version, check it and activate manually, after that activate business content version

  • I can not get any sound while playing Flash content in IE, FireFox, or Chrome

    I have Windows 7, 64 bit.  I have ie 8, I think it is 32 bit, ("About ie" does not indicate 64bit).  
    I have unistalled Adobe Flash and re-installed, I have verified that I have the REG files under System32/ and SysWOW64/ (or whatever)...
    I installed Chrome after I have having this problem.  I have plugged my speakers into both the AudioJack in the back of machine, as well as in the headphone Jack.  I have tried just using headphones...
    I have gone to the 'configuration site' I have deleted Windows temporary files, I have deleted i.e. and FireFox files.
    I have checked multimedia setting in ie advanced tabs. 
    I have checked the sound volume in the 'Mixer'
    Sound works in my broser for Quicktime applications (like video on apples website).  Sound works everywhere else...playing music, Windows startup, speaker test, etc...
    I have worked on this for hours!!!  Please help.
    Thanks!
    -Bob

    Below are the Steps from:
    http://www.codecguide.com/fix_for_flash_sound_problems.htm
    And my results:
    Flash stores its files in a temporary files folder. A corrupt download can cause the sound problems.
    Delete the following folders:
    C:\Documents and Settings\%UserName%\Application Data\Adobe\Flash Player
    C:\Documents and Settings\%UserName%\Application Data\Macromedia\Flash Player
    Actually…Note that point 1 sould be %APPDATA%\Adobe\Flash Player%APPDATA%\Macromedia\Flash Player
    (Thanks willener)
    I completed this – No help
    Empty your temporary internet files.
    Internet Explorer: Tools -> Internet Options
    Firefox: Tools -> Clear Private Data
    Opera: Tools -> Delete Private Data
    I completed this – No help
    Empty your temporary files folder.
    Use this command to empty your temporary files folder:
    Start -> Run -> RMDIR /S /Q "%TEMP%"
    I completed this – No help
    Install the latest version of the Flash plugin. You can download it HERE. If you have problems upgrading the plugin, then uninstall your existing version first with this tool. Close your browser(s) before you run the uninstall tool.
    I completed this – No help
    Run the K-Lite Codec Tweak Tool. Near the top you should see an option to fix the sound (Midi, WaveOut). Select that and press Next. If the option is grayed out, then that particular registry fix is not needed. This fix will restore a missing "wavemapper" registry key.
    I completed this – No help
    Go to the Flash Player Settings Manager website. Click HERE.
    Check the box called "Allow third-party Flash content to store data on your computer."
    I completed this – No help
    Go to the Flash Player Settings Manager website. Click HERE.
    Click on the button to remove the data that the Flash plugins has stored for websites that you have visited.
    I completed this – No help
    Check if your sound device settings are correct:
    Start -> Settings -> Control Panel -> Sound and Audio Devices -> Audio
    This is not correct instructions for Windows 7. 
    Obviously I have checked sound settings in RealTek Audio manger several times. As well as in the mixer, and in the Internet Option Settings (Advanced Multimedia).  I checked setting under “Hardware and Sound” there is nothing there that has any effect.
    If you have QuickTime installed, then go to the QuickTime control panel. On the Audio tab, set "Default Music Synthesizer" to "General MIDI".
    On the Advanced tab, disable "Enable playback of Adobe Flash tracks".
    On the browser tab, click on "MIME Settings". Under "Miscellaneous", make sure "Flash media" is unchecked.
    These are not accurate options on my computer (Quicktime 7.6.9).
    Under Default Music Synthesizer.  There is no “general MIDI” only option is “Quicktime Music Synthesizer”
    Advanced Tab: “Enable playback of Adobe Flash tracks".is not an option
    Browser Tab: "Flash media" is not listed under MIME Settings (There is no Miscellaneous)
    Check if the file msacm32.drv is present in the C:\Windows\system32 folder. If not, copy it from another PC (that has the same version of Windows) and place the file in the system32 folder. If you are using a 64-bit version of Windows, then the file should be present in the C:\Windows\SysWOW64 folder.
    Verified these files are here.
    If you are also having sound problems with other applications, then re-installing your audio drivers might solve the problem.
    I am not having problems with other audio applications, but I still completed this – No help

  • How can I get a list of active savepoints for the current session?

    Hi,
    In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
    "Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"
    So how can I get a list of active savepoints for the current session?
    Could you please also let me know if there is any better way to debug this issue.
    Appreciate any quick response as the issue is very critical.
    Thanks,
    Soma

    user776523 wrote:
    Hi,
    In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
    "Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"It sounds like there's an execution path in the code where the SAVEPOINT is never issued.
    There is no way to get a list of active savepoints. Is this your code or a "canned" procedure? If it is your code you can go through the code looking for answers, possibly tracing execution using DBMS_OUTPUT.PUT_LINE or writing messages to a log table. If its a "canned" procedure you may need to open an SR with Oracle

  • The new Pages in Mavericks OS:  How can I get a ruler down the left side?  When I click on "Show Rulers,"  all I get is a ruler at the top.

    In the new Mavericks OS, when I use Pages, I cannot find a way to get a ruler on the left side of the document.  When I click on "Show rulers," all I get is a ruler at the top of the document.  How can I get a ruler on the left side?

    Wait for an Apple update to Pages which is suppose to put the vertical ruler feature back in.

  • My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay in store?

    My iphone 5 went into search mode and I can't place or receive calls or use the internet but my text messages work. Sprint had me do a master reset and my phone doesn't work at all now I can't get it past the activation. Will I have to pay for repairs in store because I didnt get the Apple care plan when I purchased it. Sprint said it may be a phone problem not sure if I should take it to Sprint or Apple...I just need my phone

    I'm sorry to learn that you are not able to make/receive calls chelseabee! (ticket number removed) results indicate that there is no issues with the network or account provisioning. Since you have already done a hard reset http://vz.to/1gBkSJc (as per your post), I recommend exploring replacement options. If your phone is within the one year manufacturers' warranty we can provide a Certified Like New replacement http://vz.to/uyYF0o as long as no physical/liquid damage exist. If your phone has sustained physical/water damage and you have insurance, you can submit a claim to the insurance company online at this link http://bit.ly/07CrqPK
    AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • Getting Runtime Error while Activating Characteristics in BW sandbox system

    Hi, i m getting  runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
    Short Text
    SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
       Runtime Errors         DBIF_REPO_SQL_ERROR
    even if creating a new Characteristics same error is comming.
    Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
    Edited by: kush kumar on Mar 23, 2010 11:56 AM

    Hi,
    Follow bellow steps:
    a) Once check the Lock entries by useing SM13.
    Goto SM13--> Select your object lock entries --> Select delete.
    b). Acitvate the Infoobject.
    Regards.

  • Like a fool I tried to download the new software for my 3GS. Now oI can't get the dam thing activated. I'm in Portugal but my phone originates from the UK.

    Like a fool I tried to download the new software for my 3GS. Now oI can't get the dam thing activated. I'm in Portugal but my phone originates from the UK. Help.

    I actually interpreted this as a carrier lock issue.  If that is the case the OP needs to contact the UK carrier who owns the rights to lock the iPhone.  Only that carrier can unlock it. 
    Was the iPhone unlocked by means of jailbreak software? If that is the case, then the reply from Phil McCafrey would apply to this as well.

  • Access to activating business content

    Hi ,
    I would like to restrict few users from activating business content. I thought we can do it with "S_RS_ADMWB" authorization with object "CONT_ACT" and activity 63
    I checked with our security team and we could not restrict users from activating business content.
    Did anyone could get this thing working.
    Thanks,
    Naveen

    Hi Naveen,
    In BI the security is implemented using authorizations, i,e you can     
    make an object authorization relevant and restrict users access to it   
    in this way, can you explain why you cannot use Authorizations to       
    achieve what you want to do in your case?  
    If you are using authorizations then users can either   
    display or change an object, if an object can be changed then the      
    Object can be activated as well via the content. The other option     
    is to close the system to changes but of course this is not an option  
    in a Development environment. It is not possible to partially restrict 
    access to a group of objects.                                                                               
    If its the case that you want a profile that is only allowed to see     
    objects like InfoPackage, request, InfoCube, but is not allowed to      
    change them then this is not possible in BI. The only other option is to
    set the whole system to 'not changeable'. Please read the attached note 
    337950 carefully it may be of interest to you in this case.       
    Best Regards,
    Des.

  • Deleting Activated Business Content

    How can I delete activated Business Content? Would actually deleting say the InfoObject from RSD1 actually ensure the active version is no longer available? Thanks

    Hi Niten,
    Yes. Once you delete the business content objects than there would be no "active" version only the "delivered" (Version type "D") would exist.
    Since you would be manually deleting all the objects  just make sure that you dont delete the objects and when you install they are the same.
    Bye
    Dinesh

  • How to select the all object at a time while installing business content

    Hi All,
    how to select the all object at a time while installing business content Please let me know if nay document is there
    Thanks Ahmed Pasha

    Hi,
    Please check out the below links
    [Business content Installation|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true ]
    [BI Content|http://wiki.sdn.sap.com/wiki/display/BI/InstallingBusinessContent]
    Hope it helps.
    Regards,
    AL

  • OBJECTS_OBJREF_NOT_ASSIGNED : Error while installing business content

    Hi
    Error occured while installing business content
    ABAP/4 Processor:OBJECTS_OBJREF_NOT_ASSIGNED
    Please help me how to resolve the issue
    Regards
    ASR

    Hi,
    Check in SDN... becasue there are n number of resons for that..
    /thread/1056689 [original link is broken]
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/erro-in-background-job-abap4-processor-objects_objref_not_assigned-252195
    Thanks
    Reddy

  • Getting Error ASSERTION_FAILED while activating transformation.

    Hi Experts,
    I am getting an error "The ASSERT condition was violated" while activating a transformation in BI. I applied SAP NOTE 1137447 and I am still getting this error given below.
    Runtime Errors         ASSERTION_FAILED
    Date and Time          09.10.2009 16:53:20
    Short text
         The ASSERT condition was violated.
    What happened?
         In the running application program, the ASSERT statement recognized a
         situation that should not have occurred.
         The runtime error was triggered for one of these reasons:
         - For the checkpoint group specified with the ASSERT statement, the
           activation mode is set to "abort".
         - Via a system variant, the activation mode is globally set to "abort"
           for checkpoint groups in this system.
         - The activation mode is set to "abort" on program level.
         - The ASSERT statement is not assigned to any checkpoint group.
    Error analysis
         The following checkpoint group was used: "No checkpoint group specified"
         If in the ASSERT statement the addition FIELDS was used, you can find
         the content of the first 8 specified fields in the following overview:
         " (not used) "
         " (not used) "
         " (not used) "
         " (not used) "
         " (not used) "
         " (not used) "
         " (not used) "
         " (not used) "
    Trigger Location of Runtime Error
        Program                                 CL_RSTRAN_FOBU_APPL===========CP
        Include                                 CL_RSTRAN_FOBU_APPL===========CM007
        Row                                     37
        Module type                             (METHOD)
        Module Name                             GET_CODE
    Line  SourceCde
        7     l_formula_id_32   TYPE sfbeid,
        8     l_s_fobu          TYPE rsfob_s_formula,
        9     l_r_formula       TYPE REF TO cl_foev_formula.
       10
       11
       12   IF p_r_formula IS BOUND AND
       13    p_mode is not initial.
       14     CALL METHOD cl_rsar_formulas=>reset_formula_foev_object
       15       EXPORTING
       16         i_formex    = p_formex
       17         i_objvers   = p_objvers
       18         i_r_formula = p_r_formula
       19       EXCEPTIONS
       20         no_entry    = 1
       21         invalid     = 2
       22         OTHERS      = 3.
       23     ASSERT sy-subrc = 0. "invalid call
       24
       25   ENDIF.
       26
       27   CALL METHOD cl_rsar_formulas=>get_formula_foev_object
       28     EXPORTING
       29       i_formex    = p_formex
       30       i_objvers   = p_objvers
       31     RECEIVING
       32       r_r_formula = l_r_formula
       33     EXCEPTIONS
       34       no_entry    = 1
       35       invalid     = 2
       36       OTHERS      = 3.
    >>>>>   ASSERT sy-subrc = 0. "invalid call
       38
       39
       40   l_r_formula->compile( EXPORTING i_structure_prefix = 'SOURCE_FIELDS'
       41                         IMPORTING e_abap_formula = e_t_abap_source ).
       42
       43 ENDMETHOD.
    Kindly help me.
    Thanks in advance,
    With Kind Regards,
    Kannan Jagadeesan

    Try applying the following OSS Notes:
    [OSS Note 1050275 - ASSERTION_FAILED in CL_RSTRAN_FOBU_APPL->GET_CODE|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1050275] (relevant to prior to BI 7 SP14)
    [OSS Note 1115923 - Check or transfer of empty formulas causes runtime error|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1115923] (relevant to prior to BI 7 SP17).

  • Global conversion ruleError while activation(Buss Content) of Trasfer rules

    Hi All,
    While activation of Buss Cotent transfer rules I am facing the problem [Errors with the global conversion rule for the field 0UNLOAD_PT,0DOC_CATEGR and 0PRVDOC_CTG]*  for the following data sources 2LIS_12_VCITM, 2LIS_12_VCHDR,2LIS_11_VAHDR and 2LIS_11_VAITM.
    Request you post your valuable suggestions to resolve this issue.
    Regards
    Mohan
    Edited by: Rammohnaraju Y on Jun 27, 2010 9:08 AM

    Hi Aniket,
    You get this exception as there is mismatch in type of below variables
    ·         p_global_key [type: C = 60]
    ·         l_global_key [type: RSGN_GLOB_ID]
    If we refer to RSGN_GLOB_ID, its structure and if we combine length of all fields of this structure is 90. Hence you get the exepction while assignment of values.
    As this error is specific to case and you get through standard program thus better approach would be to contact SAP in that case.
    Regards,
    Dinesh Tiwari

  • Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

    Dear S&OP community,
    I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
    This what I did...
    1) Created new attributes and master data objects and activated them successfully.
    2) Time profile created and activated successfully
    3) Trying to create planing area by assigning  time profile in step 2 and assigned master data from step1..Unable to save the data and system returns 
    this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
    My understanding is time profile needs to be active  but doesn't have to have values...
    Any help is appreciated.
    Thanks,
    Krishna

    YS,
    Here are my time profile settings
    Level       Name          Display Horizon - Past  Display Horizon - Future
    1             Monthly     -6                                       11         
    2             Quarterly     -2                                       3
    3             Yearly        -1                                       2
    Time profile is active and but time profile data is not loaded
    Thanks,
    Krishna

Maybe you are looking for