Can we give Alphanumerical number (1A) for bussiness Area

Dear Sir,
Can we give the alphanumerical number for business area (ox03) like 1A? presently system not allowed to do the same & give the error message at the time MIGO. 
Regards
BK GAIKWAD

100% You can,
OX03 - Define the Alphanumerical BA and save it.
This can be used for further all reporting
Hope it helps
Thanks

Similar Messages

  • "Alphanumeric" number ranges for material matser

    Hi all,
        What are the sequence of steps needed to create "Alphanumeric" number ranges for material matser. Can anyone explain me the steps.
    Thanks

    Hi,
    To add to what Sridhar has said ....we have got 2 number ranges only...
    either internal or extenal.....
    Better idea is to have internal only untill or unless it is at all required so.
    It all depends on material type....
    In internal it is more easy to maintain the ranges....but in case of extenal....lot more precaution is required.
    Award if any thing answer you query .
    Thanks
    Dipak

  • Can somebody give me the formula for the balance column in a check register please? I am trying to setup like sample in iWork but am missing something.

    Can somebody give me the formula for the balance column in a check register please? I am setting the register up like the sample in iWork 09 but I seem to be missing something in the formula.

    OM,
    The way the checking account balance column works is to designate one cell for the starting balance, indicate income with positive figures and outgo with negative figures, summing the transactions and adding the sum to the starting figure.
    The formula used, =$F$1+SUM(OFFSET(F3,3-ROW(),-1,ROW()-2)), is not too difficult to understand if you study the syntax for Offset. The author of this template didn't do us any favors because the expression could have been written more clearly, in my opinion. I'll explain how it's done in the template, and then how I would have written it. With the two approaches you may be able to see what it's all about.
    $F$1 is the starting balance.
    SUM requires a Range specification.
    Offset provides the range specification. The syntax for Offset is as follows:
    Base Cell. In this case it is F3, the cell the expression is written in.
    Row Offset. In this case the author takes the current row number and subtracts the starting row from it. For the first balance the offset will be zero since the first balance is in row 3. For all the subsequent balances, the offset will be negative, meaning that the offset will point to a row above the current row.
    Column Offset. In this case the column offset is 0. That means that it is pointing 1 column to the left, Column E.
    Rows. This parameter sets the length of the range, in rows. Subtracting 2 from the current row number means that the range will be 1 for the first balance and will grow by 1 for each entry down the list.
    Taking all this into account, the range for the Sum function will always be Column E from Row 2 to the current Row.
    How I would have written the balance expression:
    =F$1+SUM(OFFSET(E$3,0,0,ROW()-2))
    I believe it's easier to follow.
    The starting balance is still in F1, but only the row needs to be absolute - a fine point, I know.
    In my expression the base cell for the Offset function is the first entry cell of the transactions, E3. The row needs to be absolute, there is no reason for the base cell to move about as it does in the author's version.
    In my approach, both the row and column offsets are zero. We always start at E3.
    In my approach, the number of rows in the range is the current row number minus 2, just as in the author's expression. That means we include all rows from Row 3 to the current row.
    I'd be happy to answer any other questions about the specifics, but you need to be specific about what you don't get.
    Jerry

  • When i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?

    when i connect my iphone 4,an error message saying usb device is malfunctioning is appearing...can anyone give me a solution for this?i tried using on a different pc.but still get the same result..

    First thing i would try is to use another cable if available.

  • (268625273) Q WSI-29 Can you give any performance benchmarks for WLS web services?

    Q<WSI-29> Can you give any performance benchmarks for WLS web services?
    A<WSI-29>: It is very difficult to quantify performance aspects of web services
    since they depend on so many variables including but not limited to: backend system
    processing by stateless session beans and message driven beans, size of XML SOAP
    message sent, system hardware (CPU speed, parallel processing, RAM speed) and
    system software (JVM type and version of WebLogic server). However, let me point
    out that the EJB backend processing of requests both have the best possible scalability
    within the EJB2.0 specification (both stateless session and message driven beans
    can be pooled) and servlets have a proven scalable track record. Thus it should
    be possible to scale your web service deployment to meet demand. The overhead
    in processing XML within the servlet can be significant depending on the size
    of XML data (either as a parameter or a return type). While WLS6.1 does not have
    any features to address this performance concern, WLS7.0 will feature Serializer
    and Deserializer classes which can be dedicated to the XML to Java and Java to
    XML translation (they can also be automatically be generated from a DTD, XML Schema
    or regular JavaBean).
    It is true that web services are not the fastest way to process client requests
    but BEA is committed to making WebLogic server the fastest possible service provider.
    Adam

    see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html

  • Can anyone give me some documents for data cluster

    Hi,
    can anyone give me some documents for data cluster?
    ths!
    regards!

    Hi ,
    The following is a documentation on the <b>Data Cluster</b>:
    <b>Data clusters</b> are specific to ABAP. Although it is possible to read a cluster database using SQL statements, only ABAP can interpret the structure of the data cluster.
    You can store <b>data clusters</b> in special databases in the ABAP Dictionary. These are called ABAP cluster databases, and have a prescribed structure:
    <u><b>Cluster Databases</b></u> ( I have explained the cluster databse below )
    This method allows you to store complex data objects with deep structures in a single step, without having to adjust them to conform to the flat structure of a relational database. Your data objects are then available systemwide to every user. To read these objects from the database successfully, you must know their data types.
    You can use cluster databases to store the results of analyses of data from the relational database. For example, if you want to create a list of your customers with the highest revenue, or an address list from the personnel data of all of your branches, you can write ABAP programs to generate the list and store it as a data cluster. To update the <b>data cluster</b>, you can schedule the program to run periodically as a background job. You can then write other programs that read from the data cluster and work with the results. This method can considerable reduce the response time of your system, since it means that you do not have to access the distributed data in the relational database tables each time you want to look at your list.
    <b>Cluster Database :</b>
                    Cluster databases are special relational databases in the ABAP Dictionary that you can use to store data clusters. Their line structure is divided into a standard section, containing several fields, and one large field for the <b>data cluster.</b>
    <b>Creating a Directory of a Data Cluster</b>
    To create a directory of a data cluster from an ABAP cluster database, use the following statement:
    Syntax
    <b>IMPORT DIRECTORY INTO <dirtab>
                     FROM DATABASE <dbtab>(<ar>)
                     [CLIENT <cli>] ID <key>.</b>
    This creates a directory of the data objects belonging to a data cluster in the database <dbtab> in the internal table <dirtab>. You must declare <dbtab> using a TABLES statement.
    To save a <b>data cluster</b> in a database, use the <b>EXPORT TO DATABASE</b> statement .
    For <ar>, enter the two-character area ID for the cluster in the database. The name <key> identifies the data in the database. Its maximum length depends on the length of the name field in <dbtab>. The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
    The IMPORT statement also reads the contents of the user fields from the database table.
    If the system is able to create a directory, SY-SUBRC is set to 0, otherwise to 4.
    The <b>internal table</b> <dirtab> must have the ABAP Dictionary structure CDIR.
    <b>******** Sample Program illustrating the data cluster .</b>
    PROGRAM Zdata_cluster.
    TABLES INDX.
    ******to save data objects in cluster databases
    DATA: BEGIN OF ITAB OCCURS 100,
            COL1 TYPE I,
            COL2 TYPE I,
          END OF ITAB.
    DO 3000 TIMES.
      ITAB-COL1 = SY-INDEX.
      ITAB-COL2 = SY-INDEX ** 2.
      APPEND ITAB.
    ENDDO.
    INDX-AEDAT = SY-DATUM.
    INDX-USERA = SY-UNAME.
    INDX-PGMID = SY-REPID.
    EXPORT ITAB TO DATABASE INDX(HK) ID 'Table'.
    WRITE: '    SRTF2',
         AT 20 'AEDAT',
         AT 35 'USERA',
         AT 50 'PGMID'.
    ULINE.
    SELECT * FROM INDX WHERE RELID = 'HK'
                       AND   SRTFD = 'Table'.
      WRITE: / INDX-SRTF2 UNDER 'SRTF2',
               INDX-AEDAT UNDER 'AEDAT',
               INDX-USERA UNDER 'USERA',
               INDX-PGMID UNDER 'PGMID'.
    ENDSELECT.
    ****To create a directory of a data cluster from an ABAP ****cluster database
    DATA DIRTAB LIKE CDIR OCCURS 10 WITH HEADER LINE.
    IMPORT DIRECTORY INTO DIRTAB FROM DATABASE
                                      INDX(HK) ID 'Table'.
    IF SY-SUBRC = 0.
      WRITE: / 'AEDAT:', INDX-AEDAT,
             / 'USERA:', INDX-USERA,
             / 'PGMID:', INDX-PGMID.
      WRITE  / 'Directory:'.
      LOOP AT DIRTAB.
        WRITE: / DIRTAB-NAME,  DIRTAB-OTYPE, DIRTAB-FTYPE,
                 DIRTAB-TFILL, DIRTAB-FLENG.
      ENDLOOP.
    ELSE.
      WRITE 'Not found'.
    ENDIF.
    *******run this program and see the result.
    Hope this documentation will give you an idea of data cluster.
    if useful, do reward with the points.
    Regards,
    Kunal.

  • Can anyone give me an example for crm_svy_..._pai?

    Hi all, I have a survey, there are several questions. After I input the answers, I click the 'CHECK' button, I will check the answers. There will be different response to my answers. If the answer is not correct, I will post an error message.
    And I also need to retrieve data from tables to fill the blank.
    I am a beginner for CRM survey, can anyone help me? I create a FM:crm_svy_..._pai, and code in it right? But how can I do it?
    Can anyone give me an example for crm_svy_..._pai to do what I need?
    Many many thanks in advance!! 
    Heare is an example, but I don't its function and how does it work..
      read table lt_all_values into ls_value
                               with key answer_id = 'get_value'.
      if sy-subrc = 0.
        data: lt_values type crm_svy_api_string_t.
        append ls_value-value to lt_values.
        call method ir_survey_values->values_set
          exporting
            i_question_id = 'set_value'
            i_answer_id   = 'set_value'
            it_values     = lt_values.
      endif.

    Hi Yu,
    Could you tell how you solved your issue?
    Regards and tx in advance,
    Mon

  • How can I make lining number format for opentype fonts in Acrobat?

    How can I make lining number format for opentype fonts in Acrobat?

    I bought the Max OT font. I want the numbers on the right to look like on the left. I could do that in word, but not in adobe acrobat.

  • Can we give multiple destination files for a crystal report.

    Hi all,
    Can i give multiple destination files for crystal check process when the out put type is file.
    What i want is the text file, which will be created at the destination given by the user, must be created at other location also.
    Please help me.
    Thank you,
    Bye.

    Multiple default values for a presentation variable is only possible in 11g as Srini Said.
    Check mark : Enable user to select multiple values. (under variable datatypes)
    http://obieetraining11.blogspot.com/2012/08/obiee-11g-using-presentation-variable.html
    If it is 10g, then it is not possible.

  • Can we use same number range for different  fields

    can we use same number range for different  fields. how can we see the number range defined for a particular field

    Hai,
    Yes you can have same number range for different fields  by using the same domain to the data elements that are user to your two fields.
    To see the range:
    Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
    <b>Reward points if it helps you.</b>
    Regds,
    Rama.Pammi

  • Hello, can anyone give us the tips for AirPrint option from iPad to brother MFC 7860DW printer

    Hello, can anyone give us the tips for AirPrint option from iPad to brother MFC 7860DW printer

    It's possible Brother may provide updates to their printers to make them AirPrint capable or provide app for printing; search the iTunes Store or look to the support resources for your model of printer. For other printers, you can route the printing through your computer. If you have a Mac, Printopia might be worth a look:
    http://www.ecamm.com/mac/printopia/
    If you have a Windows system, search the web for something like "airprint Windows hack" and you'll find instructions on enabling printing.
    Another option is an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
    http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
    Regards.

  • Can anyone give me a bean for JAVAMAIL in JSP?

    Can anyone give me a bean for JAVAMAIL in JSP?
    I'd like to use a bean instead of writing a complete jsp page for each of my send mail options!!

    Have a look in the javaMail forum, youll find code for a class in there without too much trouble.

  • External Alphanumeric Number range for order

    Hi  ,
    My requirement is to create an external number range for one PM order type where
    first 8 places from left can be alphanumeric and next 4 places should be numeric only .
    like EQ12341H0112
    here last numeric characters(in bold)  actually will specify month and year in format MMYY (0112 means jan2012) . So I doesn't want system to accept  last four characters as 1312 or 0012  also (because month should be in range 01 to 12 only)
    How I can achieve the same.What number range i should define for external entry .
    Regards
    PM
    Edited by: PM_SAP87 on Jan 18, 2012 11:41 AM

    Hi,
    You will not be able to achieve this specific logic by just defining a number range. What you can do is define an external number range that is alphanumeric and use exit IWO10017 to format and validate user entry.
    -Paul

  • Alphanumeric number range for object QMERKRUECK

    Hi all
    I have raised a question on number range object QMERKRUECK few days back.
    Internal number assignment for object QMERKRUECK (numbers are in critical area)
    With reference to the same please let me clear, if it is possible to create alpha numeric number range for the same object.
    I tried in SNRO but system does not allow for this.Next is , if any userexits are there to achieve this.
    I know, this issue is hardly seen in any implementation but if anybody has gone through this and got a proper solution, please share your experience.
    Regards
    D Mohanty

    Hello,
    You can define number range for Purchase requistions in OMH7 transaction agaist each number range number and you assign can assign these number range number to your purchase requistion document types in SPRP >> Materials management >> Purchasing >> Purchase requistion >>Define doucment type.
    E.g for NB doc type number range number is 20
    and in OMH7 number range number 20  has interval from- 2000000000 to 2099999999
    same way
    for RV doc type number range number is 21
    and in OMH7 number range number 21  has interval from- 2100000000 to 2199999999
    Regards,
    Shailesh

  • Can you give a document link for script logic for NW version7??

    Hi all,
        who can give a document link for script logic for nw version7??
        thanks in advance!!

    Hi Sheldon,
    I read through your "HOW to...Custom BADI for replicating Destination_App...." and it was great. However, Can this call also be used with WHEN/ENDWHEN statements? In the MS version, when using Destination_App, I was also able to map source accounts into the correct destination accounts as well as source E type dim to desination E type dim with the following script (the mapping to destination ID was stored as properties within the source dimensions).
    *INCLUDE SYSTEM_CONSTANTS.LGL     
    *SELECT(%OPACCT%, "[ID]", "OPACCOUNT", " [TRF_FPA] = 'Y'")
    *SKIP_DIM = COSTCTR
    *ADD_DIM = BRANDS
    *RENAME_DIM OPAccount = Account_F
    *RENAME_DIM CATEGORY = CATEGORY_F
    *RENAME_DIM ENTITY = MARKET
    *RENAME_DIM DATASRC = DATATYPE
    *XDIM_MEMBERSET ENTITY = %ENTITY_SET%
    *XDIM_MEMBERSET CATEGORY = %CATEGORY_SET%
    *XDIM_MEMBERSET TIME = %TIME_SET%     
    *XDIM_MEMBERSET OPACCOUNT = %OPACCT%
    *DESTINATION_APP = FPA
    *CLEAR_DESTINATION
    *DESTINATION OPACCOUNT = %OPACCT%
    *DESTINATION TIME = %TIME_SET%
    *DESTINATION CATEGORY = %CATEGORY_SET%
    *DESTINATION CURRENCY = LC,USD
    *WHEN ENTITY
    *IS %ENTITY_SET%
    *REC(ENTITY=COSTCTR.FPA_MKT,OPAccount=OPAccount.Consol_FPA)     
    *ENDWHEN     
    *COMMIT
    I have tried the following code in the NW version, and it won't validate. Do you know if there's a way to achieve this?
    *XDIM_MEMBERSET CATEGORY<>ACTUAL
    *XDIM_MEMBERSET ACCOUNTHR =BASE_ANNL_SAL,BONUS,BENEFITS_TAX
    *XDIM_MEMBERSET CURRENCY=LC
    *START_BADI DAPP
    DESTINATION_APP=CC_PLAN
    RENAME_DIM="ACCOUNTHR=ACCOUNTCC"
    WRITE=OFF
    *END_BADI
    *WHEN ACCOUNTHR
    *IS "BASE_ANNL_SAL","BONUS","BENEFITS_TAX"
    *REC(ACCOUNTCC=ACCOUNTHR.CCPLANACCT)     
    *ENDWHEN
    Regards,
    Karen

Maybe you are looking for