Can we have a single inbound delivery for multiple po???

Hi
can we have a single inbound delivery for multiple po??? what are the steps to do it?
how to do spro settings??
please help me out.
regards
Arya

Yes you can have and for that you don't need any config.
just go to VL31N and from header hit the purchase order button and either enter the PO numbers or let system pulls the PO based on the selection adn than select all the POs adn hit adopt selected button and save.
this will create one inbound delivery

Similar Messages

How to create one inbound delivery for multiple purchase order?

Hi Experts,
Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)?
Is there a configuration needed for this? If yes, please let me know the configuration to make this happen.
Appreciate your help on this. Right answers will be rewarded.
Thank you.
with regards,
Muthu Ganapathy.

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Can you have one icloud storage plan for multiple devices

hi,
i'm wondering if there is a way of consolidation various icloud storage plans into one.
i only use my free 5gb for my 5s as i back up photos to my mac, however my wife has already upgraded her storage plan for her 5c to the £1/month.
with the new release of backing up your entire photo library on you mac (which im keen to do) im going to need to upgrade my own account as the mac is set up for my apple id.
i currently also pay for itunes match.
im keen to know if there is a way we can use one large back up facility for: my 5s, the mrs's 5c, the mac, with out paying for multiple storage plans.
im guessing the itunes match is stand alone but if i can have one payment for large storage and put everything there that would be ideal, and seem a reasonable request for most families.
any help greatly appreciated
thanks
Scott

Accounts can't be merged.

Can you have the same apple id for multiple devices?

I'm getting an ipad for Christmas so I was just wondering.

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
 Cheers, Tom

Multiple po's into one single inbound delivery

Hi Experts,
How to create the Multiple purchase order line items (Ex; In one po i am selecting only 2 line items and one more po i am select 3 line items) into one single inbound delivery for this where is the settings .
please guide me any one.
Thanks,
KK

Deshpande i have the same problem.
I tired giving all the PO for a collective inbound delivery in VL34, but it still creates one delivey for every PO item
Anand: did u manage to solve ur issue
Regards
Sumanth

Can we use single DB Adapter for multiple tables

Hi,
I have 3 tables. ONE is the Master table and other 2 tables having Primary and foreign key relationships with the Master Table.
Data is enter in the Tables 2 & 3 (based on Master Table Primary key)
I have to use a DB Adapter in BPEL Process which will be in Transaction (what type of Transaction is Best in such a Scenario).
- How do i implement it in BPEL.
- Can i use a Single DB Adapter for Multiple Tables ? (*Views* should not be created for tables 1, 2 & 3),
as we want to avoid using multiple DB Adapters, as in future Tables may increase or decrease...
- while in Transaction if Table 2 fails in Inserting / Updating, it should roll back on error and also if Table 3 fails in Inserting / Updating, it should roll back table 2 and Table 3.
- how access to concurrent users is maintained / managed in such a scenarios.
But everything should be done using Single DB Adapter without creating a separate view.
Is this Possible in BPEL..
If not, How do we design, Implementation such a BPEL Process in Transaction with a best in Performance (both BPEL Process & DB Resources)
thanks in advance
thanks & regards,
anvv sharma

Hi,
Thanks for your quick response.
I have few quires.
If we use PL/SQL, how do we implement transaction and Exception Handling appropriately based on the Error / Exception in BPEL.
If the Table 2 or Table 3 gives out Error / Exception, i have to handle it separately and intimate accordingly.
Suppose, if Table 2 got Error / Exception - Error Handling would be 'Roll back due to error in Table2'
Thanks & regads,

Multiple Delivery document for Single Inbound Delivery

Dear Experts,
My scenario is;
I have 2 Purchase Orders.
PO 1 -> 100 QTY
PO 2 -> 150 QTY
I have done partial GRN against PO 1. In confirmations tab the inbound delivery no is shown.
Latter I want to do inbound delivery for the remaining qty of PO1 and PO2 in the same inbound delivery. But while trying to pull the POs delivery, 2 delivery document are generated. I need to do the inbound delivery in single delivery document.
Kindly guide.
Thanks & Regards
Ranjit Simon John

Can you clarify on that: error message "Please maintain Table T163L". I have maintained inbound delivery in confirmation tab.
I just checked on table T100 but I cannot find such message, it could be that T163L is a variable which would make it a pretty generic message, but I would be interested in the message number.
I have 2 message with T163 mention in the text which are:
E
VL
664
There is no entry for confirmation category & in T163D
E
VL
665
No delivery type assigned to confirmation category & (table T163D)
Further you are saying you have already maintained an inbound delivery in the confirmation tab.
Isn't this a kind of duplicate if you have already an IBD maintained and you want create another one?
Looking at this message again, it starts for me to make sense then, because the customizing is about sequence , and you do not have an entry that you expect another IBD as a second activity in your confirmation sequence.

Inbound Delivery For Scheduling Agreement Lines using LSMW

Hi,
We need to create inbound deliveries for scheduling agreements. Our scheduling Agreements are too big with 200 lines. But the vendor used to send only few discrete lines in his ASN. Is it possible to create inbound deliveries for the Scheduling agreement using LSMW? Is there any standard BAPI or IDOC available to handle this in LSMW? Has anyone done this before?
Our requirement is as follows.
1. Create Inbound Delivery for few lines of the Scheduling Agreement
2. The delivery quantity of the inbound delivery will be a partial quantity of the Scheduling Agreement
3. Materials are batch managed and the batch number for each inbound delivery item need to be captured.
4. Vendor's ASN Number and its item number need to be captured at inbound delivery header and item level respectively.
Note: Delivery Schedule of the Scheduling Agreement is not used in the above scenario.
If you have any input, it will be really appreciated.
Regards,
SP0526

Hi,
You can give your scheduling agreement number in the field Purchase Order.
If you want select from the list, you can click on PO tree (just under create inbound delivery). There selet document category as "L". You will get the scheduling agreement list.
Regards,
Prabu

Goods receipt through Inbound delivery for Sub-Contracting Purchase order

Hi
I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
Thanks in advance for your immediate response.
with regards,
Joseph Anand B

Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
You can fix this by maintaining correct batch in the PO component list.
But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the recevied stock shouldn't have been processed to do reversal of inbound delivery.

Inbound delivery for a STO ??

Hi
What are the steps to do a Inbound delivery for a STO so that I can do Goods Receipt using that Inbound delivery in receiving plant.??
Pls tell me the configuration steps involved and other relevant steps involved.
Also give me any SAP help link too.
Thanks
Maruthi Ram

Hi,
You have to do Replenishment delivery (Outbound) at the issuing plant and goods receipt in the receiving plant with respect to the same.
Process Flow (Stock Transport Order with Delivery and Billing Document/Invoice ):
Creating a stock transport order in the receiving plant
Purchasing also determines the price for the materials.
Posting a delivery in the issuing plant
The issuing plant enters a replenishment delivery in Sales and Distribution. Unlike a stock transfer without a billing document, no stock in transit is created.
Creating a billing document in the issuing plant
The issuing plant creates the billing document for the delivery. SD also determines the price for the delivery
Posting a goods receipt in the receiving plant
The receiving plant posts a goods receipt for the delivery. The goods are posted to unrestricted-use stock
Posting an invoice in the receiving plant
The invoice referring to the billing document is entered in the receiving plant.
Please refer to link: http://help.sap.com/saphelp_47x200/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
for further details.
Regards,
Narayana.

How to create inbound delivery for items with no confirmation control key.

hi Please help me with this..
are there any user exits to create an inbound delivery for scheduling agreement items with no confirmation control key.
my req is
i have 12 items (me33 transaction) of them three have confirmation control key populated and out of those three 2 will be deleted so only one item is left for inbound delivery creation, but i need to have all this possible for all items with or without confirmation control key.
thank you

hi
for inbound delivery there is BAdi called LE_SHP_DELIVERY_PROC... in there is method called ITEM_DELETION... in this u can flag the item to delete or not..
this will be triggered for inbound as well as oubound delivery..
you can check confirmation status for the PO in the table EKES... in this table there is filed called EBTYP.. using this field u can check the PO item confirmation status..
I hope above information is helpuful for u

Creating inbound delivery for the purchase order line items

Hi Experts,
Please let me know how can I create inbound delivery for the purchase order line items? Say, I have a purchase order with 5 line items in it. I wanted to create an inbound delivery for only 2 line items at this point of time. Which SAP Standard transaction I have to use and what all data I need to populate? I would appreciate any help on this and will reward the right answer. Please let me know.
Thank you in advance.
with regards,
Muthu Ganapathy.

Hi,
While creating the inbound delivery (VL31N), intially all the items will be shown, see the advance shipping notfication - from the vendor for which he has send confirmation & rest items you can delete simply & save. & next time when the vendor sends rest advance shipping notifcation (confirmation), you can receive them.
Hope this answers your query.
Regards
Irfan.

Single billing document for multiple delivery documents

Hi,
Can someone tell me how to configure or proceed to make single billing document for multiple delivery documents.
Document flow: Contract--> Order---> Delivery----> Billing
-Thanks

Being an old member of the forum, there is no need to stress the importance of adhering to forum rules where it has been clearly spelled out to avoid posting repeated queries.
If you search the forum or Google it, you will find lot of documentations available on the same topic. Take the inputs and try on your own. Still if you face any issue, update here.
G. Lakshmipathi

How can i have a different Apple ID for my 2 iphones, currently both are having the same Apple IDs and all data is getting sync which i don't want to happen?

Hi Currently having single Apple ID for my iPad, iPhone 4S and iPhone 5. Can i have a separate Apple ID for my iPhone 4S and iPhone 5. At the moment since the apple id are same the contact are getting sync between the 2 phones which i don't want to be in Sync.Will having two separate apple ID solve the issue or is there any setting that i need to make.. Pls suggest
Thanks
Ravi

Yes, you can certainly create a new Apple ID at appleid.apple.com (which will have to be associated with a different email address from your current ID) and then change the various settings and applications on one of your iPhones to use this new ID.

Post GR against inbound delivery for purchase order

Hi All ,
I am trying to post goods receipt against inbound delivery for PO and using BAPI_GOODSMVT_CREATE .
But the BAPI is not posting GR.Is there any other way to do it ??
Regards,
Shital.

u can pass
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
         EXPORTING
              GOODSMVT_HEADER = GOODSMVT_HEADER
              GOODSMVT_CODE    = GOODSMVT_CODE
              TESTRUN          = TESTRUN
         IMPORTING
              MATERIALDOCUMENT = MATERIALDOCUMENT
         TABLES
              GOODSMVT_ITEM    = L_GOODSMVT_ITEM
              RETURN           = RETURN.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
              WAIT = 'X'.
and u also refer following link
http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
Edited by: Krupaji on Dec 1, 2010 9:29 AM

Can we have a single inbound delivery for multiple po???

Similar Messages

Maybe you are looking for