Can we have SAP R/3 QAT system as source system  for BI dev

HI ,
We are doing SAP BI implementation and in our company we have already SAP R/3
The problem is BI team is doing some development in BI DEV and they want to see some data.
But unfortunately we don't have much data in DEV enviornment.
So my question is can we have SAP R/3 QAT system as source system  for BI dev.
Will there be any issues going forward.
As per my understanding technically source system is just an RFC connection for BI, so we can point it to QAT as well.
Do you guys foresee any issues in that?
Thanks,
Sumit

Hello Sumit,
What Arun said was what my concern was, he explained exactly the scenario that I faced, and that your BI team will face if you arrange your landscape as you said. 
In my company for a while I had the BI Dev box connected to our ECC SND box.
It was done that way because of the lack of data in ECC Dev.
It worked, but it was definately not the best solution.  Today we have BID and ECC Dev connected, BIQ and ECC Q, and BIP and ECC Prd.  We do have data in teh attached ECC systems due to recent refreshes too, a large data set is very nice as it helps the BI team significantly.
That is the best way to arrange the landscape (and throw a BI SND to ECC SND for the true best practice!)
Thanks,
Nick

Similar Messages

  • Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

    Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
    Thanks,
    Sreenivas

    Hi Sreenivas,
    I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore.  Your Discussion will most likely get reported as non-specific and get removed.  If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
    There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed.  There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having.  If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
    Regards, Mike
    SAP Customer Experience Group - CEG (and a Moderator)

  • OBN: How can we add the tcode of target system into Source System.?

    Dear Experts,
    I want to add a t-code ME53n of ERP) into a role as OBN target in my SAP TM.
    I tried to add this t-code but could not find this t-code in SAP TM system.
    How can we add the tcode of target system into Source System.?
    I tries to import the role of target system but that does not work.
    Please help!
    Regards,
    Saurabh

    Hi Saurabh,
    Logically there is no need to add a tcode of the target system in the source system.
    If you have right roles in the system then system should allow you to add tcode in the OBN target simply by going to PFCG roles and using add transaction feature.
    To make sure it works properly you have to check the Method & Parameter assignment to the newly added tcode.
    Thanks & Regards,
    Tarun Kumar

  • If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

    If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • Can you have two Apple IDs on one IPAD? One for school and one for home?

    Can you have two Apple IDs on one IPAD? One for school and one for home?
    If so do you know how to do it?

    It depends on what you want to do.
    You could, for example, have one AppleID for iCloud backup [and therefore message syncing, notes syncing, etc] and a second one for iTunes [music, iBooks, etc].
    But if you are looking for a way to flip everything between different appleIDs, then no.

  • Can I have two phone lines on my iPhone 4G (one for biz and one for personal calls)?

    can I have two phone lines on my iPhone 4G (one for biz and one for personal calls)?

    FWIW, from my experience I was not able to get this to work.  When I conected a second bluetooth audio device the first device disconnected.

  • Extension mobility - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone?

    extension mobility  - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone? thanks

    Yes, or simply configure 1 UDP and default device profile for the other one.
    EDIT: and actually with those models, you should be able to use just one
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_011000.html#CUCM_RF_EDCB3C30_00

  • Can I have two versions of firefox? i.e. one for work and one for home use?

    Can I have two versions of firefox? i.e. one for work and one for home use. I use Windows xp
    I would like to start fresh with a new firefox for my work only so I can keep my work related bookmarks etc separate from my at home browsing.

    Yes - are you wanting to run 2 profiles on the same machine? See https://support.mozilla.com/en-US/kb/Managing-profiles on how to create a new profile. You then just choose which profile you want to use each time you open Firefox.

  • Source system restore - Source system does not exist

    Hello friends,
    We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
    We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
    Now, when i check RSA1 source system Check for QA1, i get this error :
    Port 'A000000103 ' of type 'ALE ' does not exist
    No destination exists to source system QA1
    I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
    Please suggest.
    I do not have to lose transfer rules/PSA tables..etc.
    thanks
    ashish

    I get this when i try to restor connection :
    Source system does not exist
    Message no. RSAR175
    Diagnosis
    You have specified that you want to restore source system QA2. This source system is not known in BI.
    System Response
    The source system is not restored.
    Procedure
    Recreate the source system.
    If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

  • Assign Source System to Source System ID

    Hello Experts,
    I am loading master data from flat file (which is an export from another BI system Info Object) in which one of the attribute is SourceSytem ID (0SOURSYSTEM). But in the flat file some of the records for this particular attribute are blank  and some are with R3. So the records which are without any sourcesystem ID are not getting loaded.
    Error is as follows: No source system ID exists for source system (logical system) FLAT_FILE.
    Detail Error: Procdure: Assign source system ID to logical source system FLAT FILE. To do this go to TOOLS--> Assign source system to source system ID from main menu of DWB.
    Can anyone tell me what exactly I need to give at this place. Any two digit char or do I need to contact basis to follow any specification?
    Thanks for your time.
    Experts please let me know how I can proceed loading flatfile data which i got from another BI system.
    Edited by: saptrain on Apr 5, 2010 7:52 PM
    Edited by: saptrain on Apr 5, 2010 7:53 PM
    Edited by: saptrain on Apr 5, 2010 7:53 PM
    Edited by: saptrain on Apr 5, 2010 11:07 PM

    Hi,
    What exactly does this attribute does while reporting?
    Usually if you have 2 source system then this attribute is used to differentiate between to source systems. You have to use this is report to restrict to particular source system
    I am assuming it will just differentiates the data that we loaded either from R/3 or FF or something else. Is that right?
    Yes, You are right
    Apart from that is there anything useful in reporting point of view?
    Everything is based on reporting. Mostly you will use this when you are having two source systems. Ex: ECC and CRM for 0BPARTNER info object
    It doesnt matter if I give any two chars(as u said) right?
    No it doenst matter. You have button called something "Suggest ..." you can use that. Other wise you can give your own name
    thanks
    Srikanth

  • Can I have access to partition of the other operating system?

    Hi everyone,
    I have Windows 8.1 installed through the Bootcamp. I gave a limited 56 GB space to the Windows partition and now I want to have access to some files that I have in MacOS drive. Is it possible to have access to those files? I am looking for a way to be able use the files in both partitions no matter which operating system is up in the computer.
    Thanks in advance.

    Of course. Moreover, Apple includes a driver inside the Boot Camp drivers you have to install in Windows that allows you to read your OS X volume in Windows. If you have not installed those drivers, look for your computer's model and your Windows version in this website to download the proper drivers -> Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support
    After downloading the drivers (I suppose you are doing it in Windows), just open the downloaded file and run the installer.
    However, note that the driver is read-only, so you will not be able to write in the OS X volume. Instead, I would recommend you to copy the files you need to modify from the OS X volume to the Windows one, so then you can move them to the OS X volume once you have booted up in OS X.

  • Can I have the new ipad be installed in Chinese system? It's a gift for my Chinese friend, who's not good at English.

    Can I have the new ipad be installed in Chinese operation system? It's a gift for my Chinese friend, who's not good at English.

    Chinese comes pre-installed. There's nothing special that needs to be done.

  • Can oracle 8.1.6 connected BI as a source system

    Hi Gurus,
    Can Oracle 8.1.6 be connected to BI as a source system? and also Access 97 integration to BI>
    Regards,
    Jaya.

    No cross posting
    Read the "Rules of Engagement"
    Regards
    Juan

  • Can I have a Master/Detail page without a repeating region for the Master links?

    Hi there.
    I have been trying to find the solution to this for hours, but with no luck at all.
    I have a master/detail page that uses an HTML dataset.  It's pulling content from DIV tags within the same page, using 2 colums ("topic" and "description") and is working properly using this code:
    <ul spry:region="ds1" spry:repeatchildren="ds1">
    <li class="product" spry:setrow="ds1" spry:select="selected" spry:hover="hover">{topic}</li>
    </ul>
    What I'd really like to do though, is have some individual images serve as the {topic} links instead of having the {topic} listing built dynamically using the repeatchildren. So, basically, I'd like to hard-code the topics using images, and when you click on it, it then loads the specific {description} content.
    But as soon as i remove the repeatchildren, and hard-code the <li>'s, it doesn't load the description. It does do the spry:select and spry:hover part, but it just doesn't change the detail region content. I even tried various "onclick"s such as setCurrentRow(2), and that doesn't work either.
    Any advice you can give me I really appreciate!
    Below is my code:
    var ds1 = new Spry.Data.HTMLDataSet(null, "sourceContainer", {rowSelector: "div.topic", dataSelector: "div.QandA", columnNames:["topic", "description"]});
    <table width="90%" border="1">
    <tr>
    <td width="21%" valign="top">
            <div spry:region="ds1">
    <ul>
                     <li onclick="ds1.setCurrentRow(0);" spry:setrow="ds1" spry:select="selected" spry:hover="hover">[an image goes here]</li>
                    <li onclick="ds1.setCurrentRow(1);" spry:setrow="ds1" spry:select="selected" spry:hover="hover">[an image goes here]</li>
                    <li onclick="ds1.setCurrentRow(2);" spry:setrow="ds1" spry:select="selected" spry:hover="hover">[an image goes here]</li>
    </ul>
                </div>
    </td>
      <td width="79%" valign="top">  
      <div spry:detailregion="ds1">
      <div>{description}</div>
      </div>
      </td>
      </tr>
    </table>         

    Your onclick and setrows are conflicting. (they do the same thing....)
    Get rid of the spry:setrow attributes and it should work fine.
    Hope this helps,
    Don

  • Error while source system creation/Source system transport

    Hi,
         In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
         Since we can’t create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
         I have two queries.
    1.  Is this way is correct for creating the Source System for BW Production system?
    2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
    Error in source system GWPCLNT900
         Message no. RSAR502
    Diagnosis
         With Remote Function Call to system GWPCLNT900 error connection closed
         (no data)  ccurred.
    Procedure
         Remove the cause of the error.
    When tried again I got the following error message
    Basic type ZSBB030 doesn’t exist. EA 447
    Result of the destination check: Timeout RSAR 375.
    Could anyone throw some light on these errors?
    Thanks in advance.
    Krishna

    Hi,
    you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
    In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
    The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
    Please look at best practice documents on a more step-by-step guide...
    Best regards,
    Christian Frier

Maybe you are looking for

  • How do I Print eBay shipping labels from iPad

    My wife sells on eBay.  She is not a big time seller but sells 20 to 30 items per month.  She does everything from creating the listing to taking the photos for the listing on her iPad Air. The final step is printing out the shipping label, but can't

  • Connecting Inspire 6.1 speaker system to Television

    Hi, I am having creative inspire 6.1 6600 speker system connected to my computer and its working perfectly for me.Recently i bought a television LG 29FD55VE. I am planning to connect the speaker system to this Television.How do i do that? There are t

  • Using a BT Business Hub on a home line.

    In total desperation at being let down again and again by BT, who have now given me a broadband speed between 83 kbps on a good day and 15 kbps on a normal day, I'm trying anything to get even close to a 'proper' broadband speed. I was advised to try

  • Creating the simplest menu similiar to multiple buttons

    Hi everybody, my question is easy. All I want to do is create a simple menu, which does look as a menu, and at the same time works as this exaple: <s:HGroup>      <s:Button label="Start" click="somePlayer.start()"></s:Button>      <s:Button label="Tu

  • Re-intregrate characteristic data in BPS

    Hi, I have a question about integration data in BPS in my model, on first step, a manual planning layout is filled with some characteristic date (such as description and texts) and a ratio (amount) and save the data on the second step, i want to crea