Can we have two admin instances while performing Dynamic clustering?

Just referring you to this thread.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/91f6434f-8a4e-4e53-b185-2f3a493aa134/issue-with-office-365-integration-module?forum=winserveressentials
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Similar Messages

Can we have two different web url for a same instance ??

Can we have two different web url for a same instance ??
I have read it somewhere that it's possible in R12....please correct me if I am wrong...and if it's correct please let me know the doc id for it...

Hi again;
Pelase also see Hussein Sawwan previous great post
Multiple URL (hostname.domain) to the same instance
Multiple URL (hostname.domain) to the same instance
Regard
Helios

Can we have two instance of OHS running in a box

Can we have two instance of OHS running in a box with single installation of OHS server.
Something like running multiple apache instance with using different conf file for each.
-Ram

It is true that creating more than one instances of OHS out of one set of binaries (install) is NOT supported by Oracle. But is it possible if you don't care about what's supported by Oracle? You betcha! Yes it is possible (even in 10.1.2 and 10.1.3 OHS) to create and run more than one instances of OHS out of one install.
This is basic Apache concept which Oracle does not disable. But I would again mention, this is something Oracle does not support. How would you achieve this? There is planty of information on internet, google can be your friend:
http://lmgtfy.com/?q=run+multiple+apache+instances
If you do this route, note that not just httpd.conf, you will also need to make another copy of dms.conf and ssl.conf. And if you want to have this another instance of OHS managed by opmnctl, you will also have to duplicate (with necessary changes) the section in opmn.conf about HTTP_Server too.
Hope this helps.
Thanks
Shail

Can I have two separate email addresses in my mail?

Hi,
Can I have two separate email addresses/users with my one email account without paying anything extra?
For instance: one email address with [email protected]
And another one at: [email protected]
And, if that's possible:
1. Does it mean paying extra because you are having two separate accounts?
2. Since it is on the same general account, do the emails and return emails show in the same location or do they show in a different place? For instance, if the 2nd user sends and email and someone returns it, will I as the first user name see both of those?
Thanks much,
Lee

You can have up to five additional addresses, but they are not separate accounts. They are called 'email aliases' and are simply extra addresses which feed into the main inbox (and please note that you cannot create any new @mac.com adresses, they will be @me.com). Please see here about aliases:
http://homepage.mac.com/rfwilmut/notes/mobileme.html#alias
It's actually a good idea to give everyone an alias address rather than the main one, since if it gets spammed you can easily change it, whereas as you can't change your main address without opening a new account.
If you need extra email accounts then you could go for a MobileMe Family Pack. Of course you can always set up free accounts with Google or Yahoo.

How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

Hi,
I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
I am almost lost to find the operating tools.
1. How can I copy files from hard drive to computer and vis-a-versa?
2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
3. No right click works on track pad?
4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
I will very much appreciate if you could email me the with the solution/answers please.
Regards,
Khagendra Limbu

1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

How can I have two differents versions of provider working in a Server

Hi... I'm a ASP Classic developer. I'm working with Oracle 10g and I'm using the Oracle Provider 10.1 but now I need to change of version to 10.2 Release. So I install the 10.2 Release Version in same host where I have de 10.1 version.
For do the connection to Oracle 10g DB I do something like this:
Connection.asp -->
<%
Set Cn = Server.CreateObject("ADODB.Connection")
Cn.Open "Provider=OraOleDB.Oracle; Data Source=DBTest; User ID=Test; Password=Test;"
%>
I have to Tnsnames.ora files (one for 10.1 and other for 10.2 Release). I this 2 files I descrive de Oracle Service Named DBTest like this:
C:\oracle\product\10.1.0\Client_1\network\ADMIN\tnsnames.ora
-->
DBTEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.10.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DBtest)
C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN\tnsnames.ora
-->
DBTEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.10.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DBtest)
However when I try to connect to DB I got the next exception:
OraOLEDB (0x80004005)
ORA-12154: TNS:could not resolve the connect identifier specified
Two cuestion:
--> Can I have two versions or Oracle Provider working in a server???
--> How can I specify to ASP page the Oracle Provider than must to use???
Tks 4 help

I'm not an ASP developer, but if you are able to set $ORACLE_HOME environment variable through ASP you can then switch providers..

Can we have two document types in SAP_SRM5.0?

Hi All,
Can we have two document types in SAP_SRM5.0? The doc type EC is configured for EC-PR and PO , But now we need to rollout buyers intervenes if sc< 5000K, should generate the PO directly for non-catalog.
For instance;
1.     Existing scenario,
a.     SC ->approval u2013>PR then buyer converts into PO manually (Non-Catalog).
b.     SC( with catalog )->approval->PO ( 54XXXX )
2.     Now as per our requirement, SC->approval -> PO ( non-catalog ).
How to cope up these two scenarios in our system.
Please advice?
Regards,
Lalit

Hi Masa,
Itu2019s true we have classic scenario and there is no difference in these two scenario; we simply need to pressure off of low value of SC has to converted into PO directly.
We have set EC doc type ( no range as Internal here SRM and In Backend System External with No Range 54 XXXX ) .
We donu2019t need to create new number range;
1. No Range : 51 XXX
SC->PR-PO ( 51xxxxx) range ( Existing System)
SC ( less thn 1000k ) only PO ( with the same number range 51XXXX) ( proposed )
2. No Range 54 XXXX which we have set for Catalog PO which I donu2019t want to disturb .
Please advice how we can proceed .
Regards,
Lalit

[svn:bz-trunk] 13716: since include-read-only is a server global setting, we can't have two channels with different value.

Revision: 13716
Revision: 13716
Author:   [email protected]
Date:     2010-01-22 09:26:12 -0800 (Fri, 22 Jan 2010)
Log Message:
since include-read-only is a server global setting, we can't have two channels with different value. remove the test for the include-read-only false. update the service-config.xml as well.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml
    blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/tests/remotingService/dataTypes/ReadOn lyTest.mxml

You can give this a try on your Ultimate machine. While these are said to be for Vista, I used it on my Win 7 machine just fine and it fixed the problems I was having. Hope it works for you.
The problem is that Vista, by default, will only use NTLMv2 for authentication, which is not supported by Mac OS X's Windows Sharing service.
The other problem is the Minimum Session Security for NTVLM SSP based Clients.
To get around this:
1.     In Vista, open the Control Panel
2.     Switch to "Classic" view
3.     Double-click Administration Tools
4.     Double-click Local Security Policy
5.     Or Secpol.msc
6.     Expand "Local Policies" and select "Security Options"
7.     Alternate : Type secpol.msc to get editor up then
8.     Locate "Network Security: LAN Manager Authentication Level" in the list and double-click it.
9.     Change the setting from "Send NTMLv2 response only" to "Send LM & NTLM - use NTLMv2 session if negotiated"
10.     Network Security: Minimum session security for NTLM SSP Based (including secure RPC) Clients
11.     Change the setting from "require 128 bit" to unchecked (No Minimum)
12.     Click OK
the real difference between vista and windows 7 procedure is 10 and 11

Can you have two existing iTunes accounts?

Can you have two existing iTunes accounts?

I'm not sure what you mean since there is no such thing as an iTunes account. There's
1) AppleID account you use to log into the iTunes Store
2) A collection of media tracks which is what you see when you open the iTunes application on a computer and is called a library.
Yes, you can have multiple of either. It doesn't make sense for most people to have more than one AppleID, and definite disadvantages. You can have multiple libraries. Hold down the option key while starting iTunes to create a new one or swap between them.

Can you have two Apple IDs on one IPAD? One for school and one for home?

Can you have two Apple IDs on one IPAD? One for school and one for home?
If so do you know how to do it?

It depends on what you want to do.
You could, for example, have one AppleID for iCloud backup [and therefore message syncing, notes syncing, etc] and a second one for iTunes [music, iBooks, etc].
But if you are looking for a way to flip everything between different appleIDs, then no.

Can you have two apple ids on one mac?

Can you have two apple ids on one mac? We each have iPhones and want to utilize iCloud. Is this possible?

No, in this case the 2 user accounts with its own Apple IDs would be completely seperated.
If you want to share this things like music and app purchases you will have to to something else.
1. Create two user accounts on your Mac (user A and user B).
2. Create two iCloud accounts just for Mail, Contacts, Calendars, Photos, etc. (one for user A and one for user B):
On your Mac (with Mac OS X Lion or Mountan Lion):
Settings > Mail, Contacts, Calendars > iCloud > Create an Apple ID (button in left corner)
On your iPhone, iPad or iPod touch (iOS 5 or later):
Settings > Mail, Contacts, Calendars > Add Account > iCloud > Get a free @me.com address and create a new Apple ID
3. It is not recommended because you shouldn't share your Apple ID account information with other people but you could set up your old Apple ID as an account just for store purchases (Apps, Music, ...) so that everyone of you can manage the purchases in their own library (Access is limited to 10 devices). Therefore you have to setup this "old" ID in Settings of your iOS devices (Settings > iTunes & App Store) and in iTunes on your Mac.

How can I have two itunes accounts on one computer?

How can I have two itunes accounts on one computer?

Not sure what you mean.
An account is a user name and password.
Sign into whichever account you want to use for purchasing.
Authorize the computer for both account to listen to the content.

I have to Apple IDs for two different app stores in two different countries. Can I have two distinctie AppStore icons on my iPad?

I have two Apple IDs for two distinct countries. Can I have two distinct AppStore icons on my iPad?.

I have two id's and I dont want one!! I bought a used Mac pro I thought i had changd all their information, but when I try to do updates on my Iphone, I enter my id and password, then it will ask for the id of the other passoword!!!!( the person who I bought the Macpro from) grrrrr anyone know how I can get this sorted out? Thank you in advance.

Can you have two different users with itune accounts on the same computer?

Can you have two different users with separate itune accounts on the same Ipad?

Yes, create another user profile on the computer and each user can log into their own profile that way.

Can you have two iphones with separate iclouds on the same itunes account, can you have two iphones with separate iclouds on the same itunes account

I have one itunes account with mulitple libraries for each device (one iphone, 4 ipods). The one iphone is connected via the cloud. everytime a new song or app is added to the account it is placed in all of the libraries. I want to add another iphone to the acccount when I tried it replaced the contacts with the contacts on the iphone already on the account. How do I prevent that from happening and can I have two iphones on the same account and use the cloud on both
thanks

iTunes will remember the settings for each device after you set them up for the first time.
How to use multiple iPods, iPads, or iPhones with one computer -> Method two

Can we have two admin instances while performing Dynamic clustering?

Similar Messages

Maybe you are looking for