Can we implement site catalyst for Remote desktop app like MS dynamics NAV?

Can we implement site catalyst for Remote desktop app like MS dynamics NAV?
please throw some insight

Hi,
Thank you for posting in Windows Server Forum.
Does this happens for this particular application?
For a test you can publish Notepad\WordPad as RemoteApp and check whether facing same issue. Please check the result and let us know. If it’s working normally then might seems there is some configuration issue with MS Dynamics App.
Does this happens for all user or specific users?
Which version of RDP Client you are using for client system?
Try to install RDP 8.1 for better feature.
Update for RemoteApp and Desktop Connections feature is available for Windows
http://support.microsoft.com/kb/2830477
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Similar Messages

Why can I no longer use my remote Desktop Apps?

I have the unlimited data plan on my Droid Razr (I know its a tad dated) and was able to use these apps flawlessly until about 2 months ago. It says that I am unable to reach the host due to the configuration of the network I am using. Wifi still works and connects at home, but it seems that there are issues when trying to do so via both Google remote desktop app and Splashtop. Any help would be greatly appreciated!

Let's look further into this nkfitz1313! Did anything specific take place when this began (new phone, update)? Have you tried working with your home internet provider to try changing the beginning and end ranges of the IP range on your router? Please share more details. Thank you.
TominqueBo_VZW
Follow us on Twitter @VZWSupport

Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

Hello, dear colleagues.
We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info).
Send Message, Disconnect, Logoff options works only for users in Administrators group.
I can't to configure permissions for Remote Desktop Users, specific user or AD group.
To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
RDP-Tcp, Security tab, add specific user account , AD group or configure
advanced permissions
for Remote Desktop Users.
But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
Thanks.
P.S. If move specific user from Remote Desktop Users group to Administrators group on
Windows Server 2012 R2 - it works.

Hi,
You can prevent administrators from changing the permissions for a connection by applying the
Do not allow local administrators to customize permissions Group Policy setting.
This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
Apart there is one command with which you can set the permission for that check the related
article. Additionally checkthis
thread for more detail.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have a time capsule connected directly to fiber connection. I have connected a windows server directly to TC and configured it for remote desktop connection. From my interanet I can access srvr but not from my home. What config I need on TC?

I have a time capsule directly connected to fibre optic point out. All pcs and macs are connected wirelessly to the internet. I have connected a windows server pc to TC. When configured for Remote desktop connection, I can access windows server from within interanet but don't know how to access it from internet. I guess I need to change some settings in TC to get some ip adress for the remote desktop connection from my home. Anyone who can help me out? Appreciate it.
Narmin

I am a little lost now.. I have read again your title and your first post.. and they seem inconsistent.
In the title you state.
From my interanet I can access srvr but not from my home.
Interanet is not a word I know.. I assumed intranet...are you talking about internet or intranet? And just to be clear say WAN or LAN.. !! Is your home part of the interanet??
In the first post you state,
I can access windows server from within interanet but don't know how to access it from internet.
Now this is more normal.. the issue is not in the home at all, it is accessible from there but fails from internet. If this is correct, then you can do a few obvious things to determine where the problem is.
But first I need to know are you actually testing from a different internet connection to your home lan.. you are not just trying the public IP from inside the LAN as that will fail due to the TC not doing NAT Loopback.
I am also assuming the TC is the only router in the network, and has the public IP on the WAN interface.
And I am also assuming you have turned on the ping responder and you can actually ping your public ip from the internet and get a response. This helps no end in figuring out where there are issues. Strange but I have no idea if there is a ping responder in the TC WAN so you might need to forward that as well. Also if you have a dynamic public ip address are you using dyndns or no-ip or some other service to connect.
1. Test bypassing the TC.. plug the internet connection straight into the windows server,, and test if you have access. If yes, the TC is the problem.. if not, your setup on the windows server is wrong.. look at firewall in particular.
2. Assuming from test 1 the TC is the problem, Post the screen shots of the port forwarding setup for us to look at.. that is by far the easiest way to check it out.
There are lots of references to port forwarding in the TC.. eg
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html
The things that generally go wrong are firewall on the computer that is accepting the port.
The ISP doesn't allow connections on a particular port. (not likely in your case)
The router is behind another router.. double NAT will kill any port forward.
Upnp has already allocated a port.. not an issue as TC doesn't use upnp although a reboot of everything after you set port forwards is well worth it.. amazing how things don't stick properly without a reboot.
IP on the receiving device is not static and so changes.
Not enough or right type of ports are opened. This is always messier than it looks as one port is often not enough for two way communications.

Setting up Remote Desktop Apps for access from a Mac with 2FA

Hi
Setting up Remote Desktop Apps for access from a Mac with 2FA.
I have a server 2012 remote access gateway, with remote apps published(which uses single signon), behind a 2FA connection (web based) and want to know if its possible to allow macs to connect to the remote Apps behind it. i cannot permanently remove any
of the above setup as it is a requirement.
When i connect from a mac i can login to both the 2FA and remote access web pages and see all the apps but when i click on any app it downloads it to the mac and when i try to run it using Remote Desktop App for MAC i get an error :
"httpendpointexception: 4, The non-proxy http connection failed to connect with the message: 500 internal Server Error."
I have tried with 2fa turned off for testing and get the same result.Does it support 2012 TSGW server? does it support Remote desktop apps? as i cant find a definitive answer on either.
Thanks in advance for any advice.

Hi,
Thank you for posting in Windows Server Forum.
From Error description it seems to be a communication issue between your Mac and your RD gateway server. If you connect from extranet, you may need Remote Desktop Gateway or a VPN/Direct Access connection to your intranet, or forward port 3389 on your router.
500 Internal Server Error seems to be a HTTP related error.
The HTTP status code in IIS 7.0, IIS 7.5, and IIS 8.0
Also, please double check the settings if you have a RD gateway implemented in you intranet.
http://redmondmag.com/articles/2013/12/24/rd-gateway-in-windows-server.aspx
In Windows Server 2012 R2 RD Gateway pluggable authentication is also introduced. This allows custom authentication routines to be used with RD Gateway. For example building a two-factor solution on top of RD Gateway is now possible which allows doing token-authentication
to the RD Gateway which works seamlessly with RD Web Access or RDP file launching.
Please check below article for more information.
Windows Server 2012 R2 is coming what does this add to RDS – VDI
In addition, please provide the log file from the client for further research.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Error when uninstalling App-V RDS client: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder path 'C:' contains an invalid character

Issue: experienced when attempting to uninstall the App-V 5.0 SP2 RDS client.
Event Log: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder
path 'C:' contains an invalid character
Symptoms (when in this current state):
Unable to uninstall the SP2 client
You can upgrade the client (via hotfix) and uninstall the hotfix, but you will not be able to remove the SP2 client
AppvVfs filter driver will not create an instance, therefore applications will not be able to read into existing streamed VFS content, or trigger sparse files to stream content. (you can still stream the content via other means, like the UI or powershell)
Because of the AppvVfs filter driver not instantiating, applications that depend on licences that exist in VFS will not be able to be read causing certain applications to react as if the license does not exist or is an incorrect format

Resolution:
Check for the existence of a hidden folder named %appdata% in the C:\Program Files\Microsoft Application Virtualization\Client folder. (You will need to un-check the folder options box in windows explorer for "Hide
protected operating system files" to see it)
If the hidden %appdata% folder exists, delete it.
Proceed to uninstall the App-V client
After a clean uninstall and removal of remnants of the client, reinstall the client again and apply the latest hotfix available (Hotfix 2 for SP2 at a minimum).

Configure Network Level Authentication for Remote Desktop client

We publish Remote Desktop in our Windows 2008 R2 terminal server.
However, in Windows 2008R2 , the remote desktop client will a lillte bit slow
I found out that if I modify the setting in default.rdp
authentication level:i:0
enablecredsspsupport:i:0
it will increase the speed a lot
however, how can I set all user use remote desktop will disable those feature as well?
Thanks

Hi Kenneth,
I suggest you to see similar thread "disable
Network Level Authentication Terminal Server 2008"
If above thread does not helps, seek help from RDS/TS experts in here.
Or wait until any of our moderator move this post to respective forum.
Thank you for understanding.
Regards, Ravikumar P

Web Access for Remote Desktop on Windows Server 2012

Hello,
i've a Windows Server 2012 without a domain. So i installed the remote desktop session host, the remote desktop license server and the remote desktop gateway as a server role only. All is working fine. Without a domain, no management tools for remote
desktop are available. So i configure the remote desktop via the registry. I define (via registry) some remoteapps, too. All values are copied from a running Windows Server 2008 R2. So the remoteapps are runing.
Now i want to use the new Microsoft Remote Desktop client for Android. To use a remoteapp i must define a remote resource. To define a remote resource i need a url to the web access for remote desktop. So i installed the web access. But if i login to the
web access, i don't see any remoteapp. What's wrong? I've set the ShowInTSWA to 1. What must i do to access an existing remoteapp via web access?
Martin

Hi Martin,
Server 2012 RD Web Access is designed to retrieve published RemoteApps and Desktops from a Server 2012 RD Connection Broker and/or a Server 2008 R2 RD Session Host server. From your description it doesn't appear that you are using either of the above.
I know it is a more complicated set up, but you should consider having a domain, creating a RDS deployment, etc., so that you can use the full featureset as it was intended. You can do it all on a single server if needed. For Server 2012
there is a hotfix that needs to be applied to permit RD Connection Broker to work on the same server instance as active directory.
-TP

Maximum number of monitors used for remote desktop not working correctly

My goal is to connect from my home to my work machine but limit the number of monitors used to 2.
At work, I have a machine running Windows 7 Enterprise SP1 with dual monitors. My home machine is Windows 8.1 Pro and it has 3 monitors (on two video cards).
I followed the instructions of the MSDN blog post about using multiple monitors for remote desktop but cannot get it to work right.
Here's what I see when I modify the group policy setting "Limit maximum number of monitors" on the target (work) machine:
Setting - Result:
1 - 1
2 - 1 (???)
3 - 3
It looks like I can't limit the number of monitors used to 2, I get either one or all. Am I missing something or is this by design?
Max

Hi Max,
Support for multiple monitors is available when connecting from any Windows 7/8.1 computer, however, there are restrictions when connecting to a computer using multi-monitor mode. When connecting to Windows 7 computers, only computers that are running Windows
7 Enterprise or Ultimate can be connected to in multi-monitor mode. When connecting to Windows 8.1, only computers that are running Windows 8.1 Professional or Enterprise can be connected to in multi-monitor mode.
Karen Hu
TechNet Community Support

Please can someone help me to access remote desktop connection

Please can someone help me to access remote desktop connection on my macbook pro 13inch. I do have office 2011 installed.

Hi Tartan Pearl,
Welcome to the Apple Support Communities!
It sounds like you may need help with a forgotten passcode on your iPad. If this is the case, please refer to the attached article for information on how to troubleshoot this situation.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Have a great day,
Joe

Updates for Remote Desktop via App Store Software Update

Hello, and Happy Thanksgiving. On a computer running Mavericks, I installed Apple Remote Desktop 3.5 from the disk (not from the App Store.) On it's first startup, I was greeted with the message "The Remote Desktop Administrator software must be upgraded on this computer." I downloaded and installed the 3.7 update manually from http://support.apple.com/kb/dl1565. However, I view this as a "Band-Aid", and not a fix. How would I recieve future updates for Remote Desktop from Software Update within the Mac App Store?

Hi ya.. just to let everyone know Apple UK Senior Tech support are aware of this error message that we are all getting as from today and are on the case....

Help! I zoomed in on a picture online and now I can't zoom out enough for my desktop to return to normal. How do I get my desktop back to its regular dimensions?

I zoomed in on a picture online by holding control and open pinching and for some reason, my desktop was enlarged as well. How I can't zoom out enough for my desktop to return to normal? I would like to be able to see my whole desktop without scrolling over to see the time or the file menu!

Hold down the Control key and drag two fingertips down the trackpad toward you.

Can I implement the BADI_SD_SALES for VA01

Can I implement the BADI_SD_SALES for VA01 I tried that, but it won't me allow for display in Classic BAdi.

Hi,
This badi is used for Internal purpose of SAP.So try to do your validation with some other badi's or exit.
some of User Exits For VA01
V45E0001 : Update the purchase order from the sales order
V45E0002 : Data transfer in procurement elements (PRreq., assembly)
V45A0002 : Predefine sold-to party in sales document
V45A0003 : Collector for customer function modulpool MV45A
V45L0001 : SD component supplier processing (customer enhancements)
V45P0001 : SD customer function for cross-company code sales
SDTRM001 : Reschedule schedule lines without a new ATP check
V45A0001 : Determine alternative materials for product selection
V45A0004 : Copy packing proposal
V46H0001 : SD Customer functions for resource-related billing
V60F0001 : SD Billing plan (customer enhancement) diff. to billing plan
V45S0001 : Update sales document from configuration
V45S0003 : MRP-relevance for incomplete configuration
V45S0004 : Effectivity type in sales order
V45W0001 : SD Service Management: Forward Contract Data to Item
Thanks,
AMS

Group Policy for Remote Desktop Users

Hi,
Currently my users use desktops and have user and computer GPOs applied (typical things like logon scripts etc.) at the OU level where they reside e.g. Finance Users, Sales Users etc.
I am planning a Remote Desktop 2012 environment.
I have read the following:
TechNet cc779327
So, my understanding is that I create a new OU for my Remote Desktop Server only (not users), and create a new security Group for my RD Users and a security group for my RD server.
Remote Desktop Servers OU
* RD User GPO (filter on RD User security Group and RD Computer Security Group)
* RD Computer GPO (filter on RD User security Group and RD Computer Security Group)
I then apply all computer settings to the RD Computer GPO (loopback processing, Windows installer, hide shortcuts etc.).
I then apply all user settings to the RD User GPO (app specific, templates etc.)
Why not consolidate the two GPOs into one?
If I set computer settings in the computer GPO, and apply it as above to filter to the RD Server group and RD Users Group will this apply to only users un the RD User Group...or ALL users since I added the server to the filter?
If a user currently gets a setting in their normal OU e.g. Finance logon script, will they still get it on the Remote Desktop? Or do I need to copy that GPO setting to my new RD User GPO also?
Am I right to add both RD Server and RD User groups to the filter on both RD User and RD Computer GPOs?
Loopback processing - merge or replace typically for Remote Desktop?

Hi,
Thank you for posting in Windows Server Forum.
Create OU for RDS Server in Active Directory. Create security group for users who will use Remote Desktop Host (i.e. RDS Users). Create GPO (i.e. RDS Server Lock Down). In Security Filtering delete Authenticated Users, add RDS Server Account, and the security
group created in previous step.
Please check beneath article might useful for better understanding.
Lock Down Remote Desktop Services Server 2012
How to secure your remote desktop server with GPO
Hope it helps!
Thanks,
Dharmesh

Yosemite 10.10.1 Update - Can no longer connect to Windows Remote Desktop

I use Mac's VPN to create a PPTP VPN connection to our Windows Server at work. I access the Server using the Microsoft Remote Desktop App from the App Store (v 8.0.10). After upgrading to Yosemite, I could get the VPN to connect but could not get the Microsoft App to connect to the Server. I fixed this problem by deleting the VPN Connection and setting it up new from scratch. It worked fine until the 10.10.1 upgrade. Now it no longer works and my previous fix does not work. I also noticed that I totally lose internet connectivity when the VPN is connected - Safari and Outlook Windows app show no internet connection.
Microsoft App error is :
Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
Please help this has broken with both Yosemite updates and now I am up a creek and unable to work remotely.
Thanks,

I've only one hint to you, cause I've mot on Mac-Server.
With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
This had caused problems with some NAS systems too.
Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
Lupunus

Can we implement site catalyst for Remote desktop app like MS dynamics NAV?

Similar Messages

Maybe you are looking for