Can we implement workflow for release strategy in 4.7

can we implement workflow for release strategy in 4.7 for PO's please provide some documents.

HI,
Check the links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c81e21-cd00-2c10-bbba-edb8ce4961be?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70fef212-b6cb-2c10-e085-c84b80d7068e?quicklink=index&overridelayout=true
Regards
KK
Edited by: Kishore Kumar Galla on Mar 19, 2010 3:40 PM

Similar Messages

  • Customizing steps of workflow for Release strategy

    Hi Experts,
    Iam looking for step by step customizing details of workflow for Release Strategy for Purchase Requisition.
    I need necessary classification and Customizing settings for a release procedure in the purchase requisition to the workflow.
    I am looking for the steps, in which the purchase requisition can be edited straight from the workflow inbox.
    Regards
    Nani

    Hi Nani,
                First you have to confirm what kind of release it is in Purchase req you have Item level release and over all release.
    Item level release - WS00000038
    Over all Release - WS20000077
    Now please confirm with your MM consultant that he has done the release Strategy and tesed it Ok.
    Escecially things like assigning plant, Assigning Agents,Release codes and so on when everything is done by him in SPRO.
    Now your work starts If it is just release use the standard workflow.
    If they need additional notification mails and things like that copy the standard workflow and do the customization in the copied version and deactivate the standard workflow.
    You can also do dead line monitering (Factory Calander) and many more things.
    also please go through these 2 links you will get better idea.
    http://www.****************/Tutorials/Workflow/POReleaseStrategy/Details.htm
    http://www.****************/Tutorials/Workflow/PRRelease/PRRelease1.htm
    If you have any othere queries please feel to ask.
    Regards,
    Dheepak
    Edited by: dheepak on Dec 1, 2008 7:48 PM

  • User exit for workflow for release strategy

    HI,
    I got the user exit M06E0005  for workflow for release strategy. Is there any user exit during PO saving time, so that depending upon the PO no and the release code, the mail will go to respective person for the release of PO.
    Regards,

    Hi,
    Refer the below Link for PO workflow set up, for more information you can co-ordinate with your workflow team.
    http://help.sap.com/erp2005_ehp_05/helpdata/en/4c/16443c4a089537e10000000a114084/frameset.htm

  • Workflow for release strategy of Po's

    Dear Experts,
    We want to have Workflow for release strategy of Po's please let me know what settings are to be done from MM side. & form Abap what developments are required.

    Hi
    Pl check the below link
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/sap%20mm%3a%20purchase%20requisition%20with%20classification%20and%20workflow%20approval.pdf
    SAS

  • Workflow for release strategy in PO

    Dear All,
    Will anybody tell me how to configure the workflow for release strategy for PO.
    Regards
    R Panda

    Dear Manish,
    I have done all the configuration as per your guidance.
    But I am not getting the mail in mail box. I have done the following config
    Gr                 Cd                WF                            Descrip
    02     I6     1     HOD Logistics-JSR
    02     I7     1     GM Logistics-JSR
    Gr                 Cd                         Descrip                      OT                  Agent it
    02     I6     HOD Logistics-JSR     US     RP
    02     I7     GM Logistics-JSR     US     DD
    OOCU---
    MM-PUR
    1) Activate event linking- WS 20000075---BUS2012-RELEASESTEPCREATED-ACTIVATED (I ticked both the check boxes)
                                                   Linkage status-no errors      error feedback---system defaults
    2) Assign agents----WS 20000075Create agent assignments-I assigned above two user ids against user......
                                            In attributes it was no general task & not classified.
    In trxn code SWETYPV both the check boxes are ticked with no error.
    Please reply.
    Regards
    R Panda

  • Workflow for release strategy

    Dear All,
    PLz let us know the step by step procedure for worflow for release strategy.
    Regards,
    Arati.

    Hello Arati,
    Please see that you have maintained the release strategy and the same is getting affected in the PO.
    In PO -> Header Data -> Release Strategy (Last Tab) please check the Release Strategy and Release Grp.
    Now go to T - Code /nPFAC .. and enter the ID as 90100005 (PO Approver) and click on display.
    After this on the new screen there are different tabs.. in that click on last (fourth) tab: Responsibilities.
    There you will find responsibilities IDs assigned to each release strategy and Release grp.. of you cant see the same please adjust the layout.
    once you get the responsisbilities ID there for the referenced Release Strategy and Release Grp then go to T - Code /nPP01.
    There you need to do the maping. in the first field it please enter Responsibility and second tab you can put the same responsibility ID whihc u obtained from /nPFAC.
    Then select on applications and then click on new.. n there you can assign the user as a approver. Please check that proper authorization si also given to a user who is mapped for the release strategy...
    Let me know if any confusion ...
    Thanks And Regards,
    Krupesh Kothari.

  • PR Workflow for release strategy

    Hi,
    Could you please let me know the steps how to configure the workflow for the PR release strategy for both item level as well as header level.
    Thanks in advance
    Shp

    Hello,
    If you wish to work with procedure 1, define the following:
    Release codes
    Release indicators
    Assignment of release indicators
    Release prerequisites
    Determination of release strategy
    1. Release codes
    Create the release codes.
    2. Release indicators
    Define release indicators and branch to the detail screen. Here you define whether fixed purchase requisitions may be changed by Materials Planning, for example, and whether an RFQ or a purchase order may be created from the requisition.
    You can also determine the field selection here.
    In the area "Changes after the start of the release procedure", you specify whether a requisition may be changed after the release procedure has begun. You specify whether the strategy has to be redetermined after changes, or whether the release procedure has to start all over again from the beginning.
    This parameter bears a relation to the parameter "Value change". For example, previous releases are not cancelled if the value of the requisition item after the change does not exceed plus 10% of its original value.
    Attention:
    Be sure to create a release indicator (e.g. B for "blocked") that serves as the starting point for subsequent indicators. Do not set the indicators for release for the issue of RFQs and PO on the detail screen for this indicator.
    Also create a release indicator characterizing the released status. Set the indicators for release for the issue of RFQs and PO on the detail screen.
    3. Assignment of release indicators
    Assign a release indicator in dependence on the status of the release.
    Example:
    You create a release strategy S1 consisting of two release codes 01 and 02. Release with 01 is a prerequisite for release with 02. If release has been effected with 01, the requisition has been given the "all clear" for the issue of RFQs.
    You have created the release indicators B (blocked), 1 (cleared for issue of RFQs) and 2 (cleared for RFQs and PO).
    Now enter the following as assignment:
    Strategy   C1  C2  C3 ...
    S1                           B (blocked)
    S1         X                1 (RFQ)
    S1         X   X            2 (RFQ/PO)
    4. Release prerequisites
    Define which release codes are involved in a release strategy. Specify whether a code is set for a release status following release, and whether one release status is a prerequisite for another (+).
    Example:
    Strategy   Code  C1  C2  C3 ...
    S1         01    X
    S1         02    +   X
    5. Determination of the release strategy
    Determine the conditions under which each release strategy is assigned. The criteria are account assignment category, material group, plant, and value of the requisition item.

  • PO Workflow for release strategy approval process (BUS2012)

    Hi Experts,
    I have configured a workflow that should get triggered by the event "RELEASESTEPCREATED" in the Business Object BUS2012.
    The workflow is triggering perfectly and is working exactly as per the requirement, but the problem I am facing is the event "RELEASESTEPCREATED" is getting triggered twice.
    I went to SWEL and saw that the above event is getting triggered twice by the system. I am not calling the event in any user exit. I have de-activated the event linkage in the standard workflow. Only my custom workflow link is active.
    Due to this all my workitems, mails are getting duplicated as the workflow is being called twice.
    I just need to know, why the event is getting triggered twice in the system.
    If you need more details in the issue, I will provide that.
    Your help is highly appreciated. Points will be awarded to the helpful answers.
    Thanks
    Anirban

    Hello,
    First off a small comment on terminology because a lot of people say this:
    Events are not triggered, they are raised or published by the application (regardless of workflow). An event is the trigger for a workflow.
    Now we have that cleared up, have a look at the workflows that are triggered by your events and check the container to determine the release codes for each workflow. It seems to me like you are probably processing two different release codes at the same time. This could be perfectly normal (e.g. you may want to perform two approvals at the same time) and is controlled by the MM config for the release strategy. If this is not what you want then this should be adjusted by your friendly MM people.
    Cheers,
    Mike

  • How can we implement workflow for Deleted content

    Hi Experts,
    whenever we delete a content , It never went into Workflow.
    I want when user delete any content, It should go into workflow. When approver approves it, only then content item should actually deleted. If approver rejects it, content item should not get deleted.
    Is there any way to achieve this ??
    thanks

    Several things jump out about how you may be using delete.
    First is that delete rights are set up as separate and distinct from Read and Write (contribute) rights. This is true even for content authors.
    There is good reasoning behind this. Basically, because deleting items has special and often regulated meaning, giving users delete permission should be a very intentional action and never a default.
    Second, using the "expiry" functionality is a much better and safer option in most cases. Expiring a piece of content removes it from visibility to all except the sysadmin. Expiring content effectively "soft deletes" the item from the user experience while allowing the administrators to still recover the item if necessary. Another advantage of expiring content rather than deleting it is that as the content approaches the expiry date or as an expiry action is triggered, this can automatically trigger actions like a workflow review, email notification, BPEL service call etc. This gives you advance warning as well as the ability to intercept, review, and sign off on the action. You can also run batch jobs to archive and store or archive / delete "expired" items if you determine that you still need to do this.
    Finally, if you have considered the above options and still determine that you need to capture "delete requests" then the best option is to write a custom component that intercepts the delete service request and triggers a workflow, notification, expiry or other action.
    Remember that when you delete an item you must consider whether or not you are deleting just the latest released revision or all revisions or some selection of revisions. OOTB, UCM allows those with delete permissions to delete revisions one at a time. The repository manager applets provide admins with a bit more batching flexibility.
    Hope that helps,
    Warmly,
    Billy Cripe
    Fishbowl Solutions

  • Work flow for release strategy for PO & PR

    Hi Gurus
    Can anybody explain workflow for release strategy for PO and PR
    Thanks in advance.
    Atul Kulkarni

    Hi,
    First you set your all required configuration fro release strategy(Class,Char,Rel.Group,Release Strategy ,Release Indicator )
    For Work flow settings,You have to do follwoing configuration:
    MM - purchasing - purchase order - release procedure - Define Release Procedure for Purchase Orders - Work flow - Enter release code, group, user ID, object type as user.
    Creation of work flow object,activation of workflow and other related settings will be done by Techinical  work flow consulant.
    Thanks,
    AMIT

  • USRC1, USRC2 in CEKKO table for Release Strategy.

    Hi all,
    Can anybody shed some light on how i can make use of USRC1 and USRC2 in CEKKO table for Release Strategy?
    I see it in the table but i have no idea on how to use them.
    Thanks all.

    Hi,
    SAP has given user defined fileds in CEKKO communication structure which you can use by using user exits to fill in CEKKO.
    These fileds you can use as characteristics for release strategy.
    Details of user exit:
    M06E0004  Changes to communication structure for release purch. doc.
    EXIT_SAPLEBND_002, Changes to Communication Structure for Release of Purchasing Documents
    Description: User exit that control the values in CEKKO for the Release Strategy.        
    Regards,
    Shailesh Mackwan

  • Workflow with Release Strategy for PR & PO

    Hi Experts,
    I have configured the PR & PO Release strategy and it is working fine. My client wants the Workflow concept in Releases.
    So User should get the information about the releases for PR & PO.
    But I don't have much idea on Workflow, how it works for Release strategy. Can anybody give information on how to configure the Release strategy with Workflow in PR & PO.
    Points will be awarded .
    thanks & rgds
    Swamy

    Swamy,
    There are several posts available for this requirement, I would suggest you to search this forum and you would hit many threads which address this in more details and handy explaination
    check this link for PR
    http://help.sap.com/saphelp_47x200/helpdata/en/04/92768046f311d189470000e829fbbd/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/04/9276e846f311d189470000e829fbbd/content.htm
    For PO:
    /thread/743773 [original link is broken]
    Standard workflow template for PR and PO are:
    WS20000075
    WS20000077
    These can be viewed using PFTC/SWDD etc.
    Cheers
    Jai

  • Workflow In Release Strategy

    Dear All,
    Do you know how to use workflow in Release Strategy? I have used the standard workflow (1) in order when every document is released an e-mail to be sent to the next releaser. I maintained also the users at the "workflow". Can you please specify some settings??
    thanx

    hi,
    You shd check, it could be very usefull for you....check in the tree structure as per the document:
    [WORKFLOW SETUP|http://help.sap.com/erp2005_ehp_04/helpdata/EN/6f/9eeb85cd6b11d1ad77080009d2232d/frameset.htm]
    Regards
    Priyanka.P

  • BAPI for release strategy

    Hi Guys
    I need know one bapi for release strategy.
    Anybody can help me?
    Thanks Comunitty.

    Hi Ronaldo,
    Could you be more specific? Do you need to Release a PR, or you need to read/check the strategy or what?
    If you need to release a PR, check this ones (and others in FuGr MEWF):
    BAPI_REQUISITION_RELEASE       Release Purchase Requisition Item by Item
    BAPI_REQUISITION_RELEASE_GEN   Release Entire Purchase Requisition
    Cheers,
    Custodio

  • EXIT_SAPLEBND_002 -- user exit for release strategy

    Hi,
    This is regarding help on user exit for release strategy, ref: note no. 365604, however after going through all the config part given in the given note we activate the fm in cmod.... but after activating the release tab goes off from  me29n.
    That is after you activate in cmod and then if u create po and go to me29n the relese tab is not there.
    if u deactivate and create po and then relese the release tab in me29 would appear.
    All we are trying is that the po in me29n should be open to release again if we change the delivery date. However what coding and how is still a second step , first is as soon as the exit is active the tab goes off.
    New to user exit . plz help.

    Hi Again,
    I guess I have solved the issue temporarily, however Am not sure if this is the best which cld be doen to the issue.
    I didnt make any new characteristics in ct04, for the delivery dats since i didn't want to restrict the delivery date. All I did i yje coding below in the exit :
      DATA wa_eket TYPE LINE OF mmpur_beket.
      DATA wa_eket1 TYPE LINE OF mmpur_beket.
      data: c type i.
       data: p type i.
      break1.
      break2.
      e_cekko   = i_cekko.
    loop at it_beket into wa_eket . " for comparing previous and the current del date
      e_cekko-usrc1 = wa_eket-eindt.
      SELECT SINGLE * FROM eket INTO wa_eket1 WHERE ebeln = wa_eket-ebeln
      AND ebelp = wa_eket-ebelp.
      if wa_eket1-eindt <> wa_eket-eindt.
      import c from memory id 'CID'.
      c = c + 1.
      clear p.
      p = c mod 2.
      if p is not initial.             " adding 0.01 to the characteristic value for p.o amt.
      e_cekko-GNETW = e_cekko-GNETW + '0.01'.
      else.
      e_cekko-GNETW = e_cekko-GNETW - '0.01'.
      export c to memory id 'CID'.
      endif.
      endif.
      endloop.
    The logic I tried using is since the relese gets reset incase of p.o amnt and hence indirectly po amnt so i changed the value of p.o value by 0.01 incase of change in delivery date. cekok-gnetw doesnt reflect anywhere in the p.o as amnt, I guess its for defing range for relese stragey's amont in ct04 characteristics.
    However anything better incase u know plz let me know, or do u think this can cause any problems later....new to exits.
    Rgds,
    Anu.

Maybe you are looking for