Can we insert new Detail Section After Report Footer in Crystal Report

Hi All,
            Is it possible to  insert new  'detail' section  after  ' Report Footer' in the Crystal Report, i know this  is possible in 'detail' section where you can insert new detail one after another, but i want to  insert another  ' detail' section after Report Footer according  my required  result.
Regards
Rahul

Hi Rahul...........
Open Crystal Report and go to Insert option and select SubReport. From here you can create Subreport........
Check below links....
http://msdn.microsoft.com/en-us/library/ms227520%28v=vs.80%29.aspx
http://www.youtube.com/watch?v=JVNkhj_rnMY
Regards,
Rahul

Similar Messages

  • Why I can't set the Detail Section of a form at onLoad event?

    Hi,
    I'm having a silly problem with Access 2010. I can't modify the Detail section ("Corpo" in Italian) of a Form or a Report.
    Neither using the onLoad nor the onOpen events.
    What am I doing wrong? I load a micro example in my
    one drive, if you would spend some time helping me.
    Thanks in advance, Lauro

    Hi,
    I'm having a silly problem with Access 2010. I can't modify the Detail section ("Corpo" in Italian) of a Form or a Report.
    Neither using the onLoad nor the onOpen events.
    What am I doing wrong? I load a micro example in my
    one drive, if you would spend some time helping me.
    Thanks in advance, Lauro
    You should be able to size the detail section of the Form in the open event or onload event.
    I don't have 2010 on my PC. Why not post the sample code here?

  • 'You can post in new year only after closing the previous year

    Hello Experts,
    I am also getting same error while executing depreciation run AFAB ''You can post in new year only after closing the previous year''.
    I found one OSS Note 18800 and it is saying solution as below ...
    At the first depreciation posting in the new fiscal year after a shortened fiscal year, the fiscal year variants must, in all cases, still be entered in asset customizing and in FI customizing for the affected company code. If necessary, all periods for the following fiscal year must be maintained with the variant of the shortened fiscal year.
    Up to 2.2D the following correction must also be installed:
    Please carry out the syntax check only in main program SAPLAFAR.
    But in my case there is no shortended fiscal year.
    Can I apply this OSS note correction instructions ?
    Please suggest me.

    Hi
    I don't think so. Moreover that is applicable till 2.2D.
    Moreover depreciation is to be run for all periods you have not run earlier. Please check upto which period dep run has happened. Thereafter close the fiscal years in order thro AJAB.
    S Jayaram

  • Can we develop CRM report by using Crystal report?

    Dear all expert,
    There is a report in CRM PRD which our ABAP programmer had did one which is complicated and invovlving FM and method. but since we had purchase BOBJ, we would like to develop this report by using crystal report. Is it possible?
    Thank You.

    hi Stratos and Ido.
    Stratos, i had try to develop 2 report and had figure out on how to do it soon. but now i have another CRM report that need to be done first for the use of marketing meeting next week. The report is 90% done where there is one field which make my report cant be finish. once i put that field into the report, it return me all the values contain in it. This causing other field follow to duplicate as well. The situation is as below:
    without that field, my report goes(A B C D is the field header):
    A B C  D
    1   II  $  +
    2   I  %  -
    The field from table TJ30T(E is the field header):
    E
    a
    b
    c
    When i try to put the E field into my report:
    A B C  D  E
    1   II  $  +  a
    1   II  $  +  b
    1   II  $  +  c
    2   i  %  -  a
    2   i  %  -  b
    2   i  %  -  c
    I had check the linkages, there is only one key linking which is CRM_JEST.ESTAT - > TJ30T.STAT. How to overcome the situation as i mention above?
    Thank You.

  • I can't to show report from addon Crystal Report

    I created simple report via Crystal designer (Select t0.itemcode, t0.itemname from oitm t0) and I registered this report in Manage Crystal Report. When I want to preview and print this report I get message "Multiple report views are not permitted". Why it happends? Thank you

    Hi,
    Please check this thread if it helps in your case :
    /message/6261065#6261065 [original link is broken]
    Regards,
    Jitin

  • Views on CF Report Builder and Crystal Report

    Dear all,
    I would like to get your opinions on CF Report Builder and
    Crystal Report.
    As we all know, CF Report Builder is a new reporting tool.
    But I find it very difficult to design a complex report maybe due
    to limitation in its functionalities. Sometimes the tool shutdowns
    by itself without any warning and reason. But the output is nicely
    presented on a flash paper / pdf and it can be run on non-MS
    platforms.
    On the other hand, Crystal Report is a more matured product
    but runs only on MS platform. It is very easy to use and very
    powerful. I have been using it for almost 10 years. But the output
    is not nicely presented on the web browser unless if we purchase
    Crystal Report Enterprise to generate the report which is very
    costly.
    Can you all share your views? I need to make decision which
    tool(s) to use. Really appreciate it.
    Cheers,
    Keiko

    Hi Keiko,
    Yes, CF Report builder is new and initially there was few
    issues with this. But I guess now it's good after hotfixes.
    Well, I am using CF Report Builder. It's good for me. You can
    also design and develop complex reports, that depends upon the
    query you are writing. You can also add subreports to your main
    reports.
    Mainly CF Report is platform independent and you can also
    generate reports in PDF, EXCEL and FlashPaper.
    Crystal Report is no doubt is very good, and it's there for
    long years. I agree you can create complex reports with this, but
    you also can do the same in CF also. You are using this for last 10
    years, so I guess you should try something new and that is CF
    Report Builder and you can judge then.
    I am sure you will have fun with CF.
    Thanks
    Sankalan
    (www.mindfiresolutions.com)

  • How to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0

    Hi All,
    Can you please let me know how can migrated the crystal reports from BO XI 3.1 to SAP BO 4.1 and after migrate how to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0.
    can you please help on this and if document please share.
    Thanks,
    Rajesh

    Use the upgrade management tool to move from 3.1 reports to BO 4.1. After migration, open the report in crystal enterprise 4.0, you will get a message saying that the report will be converted to latest version, will not be able to view from older version after converting. (Similar words- not sure exact words).

  • Cannot Extract Embedded Font in PDF Report Generated Using Crystal Reports XI

    The issue is that sometimes the PDF reports generated by Crystal Report XI are not showing the fonts properly. Arial font is used in the Crystal report template(.rpt file) for field label and data elements. When the report is opened in Adobe Reader, it displays the message - "Cannot extract the embedded font 'AAAAAA+ArialBold'. some characters may not display or print correctly." Other PDF Readers like Foxit show blank spaces instead. I tried to change the font to Courier New, Times New Roman etc but still getting the same message.
    The issue is consistent when the application is deployed in Windows server. When deployed in Unix server the issue happens very occasionally. The font files are available and installed in the UNIX box.
    Please tell me why this error message is shown and also tell me how to get it fixed.

    Hi Scot
    Just replied to your email re. conf call.
    In the meantime.
    1st question.  
        Some of our developers are creating the reports under crystal 2008, while some are 2011.
        Could this be a problem, when they are run by the SDK?
        Should we upgrade all our developers to crystal 2011?
    The version of CR a report is created in should not matter at all. I am 100% certain this is not the issue.
    2nd question
        When the report is run, to create the pdf... why would it actually embed the font on the pdf?
        if they weren't embedded.. wouldn't it just pull up the proper font, if the user's pc had that font on their
        pc?
        if it does the common fonts aren't embedded, we would just have to worry about the things like
        barcode 3 of 9
    I can not answer this as that essentially is the way the product is designed. It may look like a limitation, but there are no work-arounds and I would not consider this to be a bug. Perhaps an enhancement, but a pretty faint hope there. And even if, enhancements take very, very low priority and take long, long time before implementation.
    3rd question
        Would the fonts, just need to be installed on the server?   we've seen some indication, that they
        also need to be in a java sub-directory
    The fonts must be on the server as that is where the report engine does it's work, then the report is streamed to the user's browser. E.g.; there is no work done on the browser. Also, the process must have rights to access the fonts.
    One last point. You mention deployment to Linux. Linux is not supported. Please see: SAP Crystal Reports, Developer Version for Microsoft Visual Studio - Supported Platforms
    I suspect this is more an issue with CR not working with the framework for Linux.
    - Ludek

  • Upgrading a Report from Crystal Reports 10 to Crystal Reports 11

    Post Author: Chakradhar
    CA Forum: Upgrade to XI 3.0
    HI All,
    Please provide a solution for this..
    Is there any way to change the version of a report without redesigning the report?
    If we upgrade the report without redisign, dont we lose the special features of the new version.
    Actually i want to the change from Crystal Reports 10 to Crystal Reports 11.

    Hi Chakradhar,
    You can open an older version of the report in a new version of designer and just saving it again will automatically convert the version to the new version. To utilized new features you must modify the report and add the new features.
    Cheers,
    Muhammad

  • Upgrade from crystal report 4 to crystal report 11

    hi,i have an old application developed use vb5.0 and crystal report 4,
    now i want to upgrade it to vb6.0 and cystall report 11, does the cystal report 4 and 11 are compatiable?

    Hello,
    Crystal Report 4.6 reports are pretty old.  There have been 3 or 4 major code rewrites to Crystal Reports between CR 4.6 to CR XI.  I think your CR 4.6 reports will run from CR XI but I can't be sure.  I haven't seen CR 4.6 in quite a few years and have never tested it.  You will probably want to update the old reports to CR XI.  To update the reports open them in CR XI and save them in the CR XI format.  Please be sure to keep back up copies of the original CR 4.6 reports.
    Your VB application will have to be migrated to a different component.  The Crystal OCX (crystl32.ocx) that was available in CR 4.6 was retired after CR8.5. In order to run your CR XI reports you'll need to migrate your VB6 application to the Report Designer Component (RDC) object model.
    There are a number of documents that will help you with the code migration.  Here are some links:
    [Migrating to the RDC in CR9|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/105181db-cb1d-2b10-38a4-b0a30e268e40] - applies to CR 9/10/11/11.5
    Upgrading from CR4.6 to CR9/10/11/11.5 is essentially the same. The above document was written for CR9 specifically; however it will work for CR10/11/11.5. You will have to make minor adjustments to account for DLL file name changes (e.g. crviewer9.dll in CR9 vs. crviewer.dll in CR10/11/11.5).
    You will also want to review the changes to [database connectivity|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0003c6cc-891e-2b10-678e-8b1a2dd96556] at runtime from earlier versions of Crystal Reports compared to CR XI.
    Here's the link to the [Online SDK Library|https://boc.sdn.sap.com/developer/library] - this includes the RDC SDK.
    [RDC 10 Sample Applications|https://smpdl.sap-ag.de/~sapidp/012002523100006012702008E/rdc10_smpl.exe].
    Please note that the RDC has been retired with the release of Crystal Reports 2008. Crystal Reports XI Release 2 (v11.5) is the last version of Crystal Reports that is shipping with the RDC. While you can migrate your application to the RDC for CR XI or CR XI R2 you may want to start planning for future releases of your application since the RDC will no longer be available. The upgrade path for the RDC is to move to the CR .NET object model.  Here is the [RDC Statement of Direction|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bd35e5-c71d-2b10-4593-d09907d95289].
    I hope this help.
    Sincerely,
    Dan Kelleher

  • Upgrade from Crystal report 8 to Crystal report 2013

    Dear all,
    Need some information pertaining to upgrade of Crystal report 8 to Crystal report 2013 (to be invoked from thick client .NET applications)
    Is it possible to directly upgrade from 8 to 2013 ? Or should there be a move to intermediate version before going to 2013 ?
    How is the upgrade generally done ? (do we just open the report and save in new version, or do they have any upgrade wizard)
    What are the typical issues we may face while going from lower version to higher version (I understand queries may break, format and layout may change.  Are there any other issues specific to upgradation.
    Regards,
    Jain

    Hi Jain,
    Moved your post to .NET Forums.
    Since CR 8.0 is 12 or more years old there is no "upgrade path" now. The Database drivers have all changed and the Parameter API's have also.
    Best way is to get CR 2011 and manually open each and every report and update the DB connection using the Set Table Location, this requires updating the DB Client to current versions also.
    Note there are some old legacy DB sources no longer available so that can be a problem also.
    CR 8 is not Side By Side compatible with any other version so make sure it's not installed on the same PC. It will never work and cause all sorts of problems for you.
    Basic report layout stayed the same but Printing has changed a lot also so search here, lots of post on the subject.
    For more help need to know your data source also?
    And check the Overview Tab, on the left side, lots of resources and samples to get you started.
    Also, first warning is set your project to X86 and the full Framework, do not use the Client version.
    And the SDK is no longer shipped with CR Designer install, VS installer and redist packages are all available from here:
    SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads
    Don

  • Report works in Crystal Reports, but not when scheduled in Crystal Server

    Hi,
    I have a pretty simple report designed in Crystal Reports 2008. Basically it shows a list of call notes (memo field) from customer activities in our CRM system. The report works fine in Crystal reports, but when run or scheduled in Crystal Server 2008 the output is always blank. Furthermore, the page format etc. is "lost" in crystal server, so that the output is PDF of a quadratic blank sheet (not my standard A4 format)... Exporting to other formats - excel, Word etc. all gives the same result.
    I have tried to strip out various formulas, formatting etc from the report, but nothing helps. Which leads me to thinking that the real problem is that the report contains a memo field? Anyone else had this problem?
    wkr
    Claus
    Edited by: Claus Poulsen on Nov 9, 2010 3:34 PM

    Hi Claus,
    I've had issues between what Crystal does and what the Report Server does.  To resolve this, we found out Crystal Reports 2008 latest service pack has some things that will fix Server 2008 and they aren't in the latest Server update. 
    We updated Crystal Reports 2008 on our machines.  Installed the latest update for Crystal Server and then installed Crystal 2008 on the Report Server and installed the Crystal Reports 2008 update.  A lot of our compatibility issues went away after that. 
    Good luck,
    Brian

  • Invalid report File path-crystal report

    Hi Every one,
    I created Crystal Layout for GRPO PLD.When I am trying to import it is showing 'Invalid report file path',But it is working fine in another server.
    Please suggest.
    Thanks and Regards
    DEV

    Hi,
    Not sure below SAP note related to above issue:
    1710613 - CR_Multiple Data Sources Not Recognized After Importing
    Multi-Database Crystal Reports
    1668274 - Print Draft with Crystal Layout
    Thanks & Regards,
    Nagarajan

  • Is it possible to programmatically replace a Sub Report in a crystal report

    We create crystal reports via the crystal report designer (not in any IDE) , and attach the reports directly to the database via stored procedures. Each report contains a page header and a page footer with patient demographic data. We distribute these reports to our customers and they may edit the templates and alter the page header and page footers specific to their needs.
    We are looking at using sub reports to build a "model" page header and page footer that would be inserted into each template at design time. What we would like to do is allow the customers to create their own sup reports to contain their custom page header / page footer and then programmatically replace the " model" sub reports with the custom sub reports. Please note that these sub reports would not contain any data access and would not be linked to the main report, rather the main report would assign the data that is displayed in the page header/page footer data to shared variables,  and the sub reports would use the shared variables as their data source to display the data.
    Is it possible to programmatically replace 1 sub report with another ? If so are there any code snippets to review -

    Yes it is. Submit your post to which ever SDK you are using into the Developer forums. But search the posts first and look in our samples. This is relatively easy to do.
    Thank you
    Don

  • Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

    Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
    However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
    The fonts, page margins everything set on report itself. Nothing being set in the code.
    Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
    Any suggestion, why this is happening.
    Thanks.
    Sanjay

    I am not sure what is being compared here?
    CRXI R2 designer to CRVS?
    CR XI R2 in some version of .NET to CRVS?
    CR XI R2 using RDC SDK to CRVS?
    Also, is this happening on your development computer or after you deploy?
    If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
    Is this a web or a win app?
    Are you seeing the same issue when viewing and exporting - say export to PDF?
    What is the printer driver used and it's version?
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

Maybe you are looking for