Can we install Applications from third party websi...

hello everyone
recently bought my new asha 501 phone
but i have a doubt 
cant we install apps from third party websites like MOBILE9.COM, ZEDGE ETC
????? IF YES THEN HOW???
and what JAVA VERSION IS THIS 
J2ME???
aksytechie wrote:
goto settings > about product
PLS HELP ME 
Moderator's note: We amended the title of this post as we moved it to the appropriate board.

Hi,
Welcome to the forum!
We cannot guarantee its compatibility when downloading from a third party website. Though we recommend all Nokia users to download any applications, games, or even themes through the Nokia Store. In the Nokia Store, you will be able to see all compatible applications, games and themes for your device. Just make sure you have an active and stable internet connection on your phone, you are currently signed into your Nokia account, find the application that you would like to download and then download it from there. 

Similar Messages

  • Can not receive emails from third party email accounts

    Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
    exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally. 
    This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
    Thanks a lot!! 
    Sammy 

    Checklist for testing inbound email problems, I am assuming outbound emails works ok.
    1. Check Port 25 forwarding on all modems routers/firewalls
    2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
    3. If using POP Connector Service, make sure POP accounts are created properly
    4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

  • Can I use firmware from third party on my WRT54G v5 router

    Hi,
    I can see any third party firmware on web for WRT54G routers. Can I used them on WTR54 v5 router, will it work fine? HAve anyone tried....

    there's no guarantee that the third party firmware is effective... somehow, they're good too... but the thing is you will not be qualified for linksys support if ever you will upload a third party firmware on your router. make sure that the third party firmware is capable of fixing your problem if you think that the solution for your problem is only that third party firmware then go ahead.

  • TS2446 i have a problem in my account every time i want to install application from app Store on my iphone a message shows that my Apple ID has been disabled, what is the problem? what can i do ?

    i have a problem in my account every time i want to install application from app Store on my iphone a message shows that my Apple ID has been disabled, i creat a new password and still that message shoes ,what is the problem ?can you help me please???!!!!

    If your account is disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it
    If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Help me!    How to use it as a web service from third party application?

    After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
    TKS！

    Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
    :D
    John

  • HT2604 I can't instal software from applications instal DVD! please help me!

    I can't instal software from applications instal DVD! please help me!

    hi, i face the same problem and appreciate your help. I delted iphone and the library. I reinstalled iphoto from the original application install DVD and when trying to open it I get a failure message. My mac version is 10.8.5 and the install disc is 10.6.6. I got a big text from the error message what would you need to help me?
    Thanks so much

  • Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.can any one help me bcoz i have to publish without air runtime.......

    Help me, I am using flash pro cc and air 4.0,i have one problem when publishing apk through air publish settings,choosing the run time option from third party is disabled.
    can any one help me bcoz i have to publish without air runtime.......

    Hi,
    This option is available when your publish target is set to AIR 3.6.
    You can download the desired AIR SDK version from Archived Adobe AIR SDK versions
    Thanks!
    Mohan

  • Launching OA page from Third party application.

    Hi,
    We would like to launch an existing OA framework page from third party system. We do not mind entering the user name and password if prompted.
    Following URL have been tried by us ... with no success.
    http://tru-64.ashokleyland.com:8050/OA_HTML/RF.jsp?function_id=22195
    &ImcGenPartyId=123&ImcGenPartyName=abc&OAHP=IMC_NG_MAIN_MENU
    &OASF=IMC_NG_ORG_OVERVIEW
    http://tru-64.ashokleyland.com:8050/OA_HTML/OA.jsp?
    OAFunc=IMC_NG_ORG_OVERVIEW&ImcGenPartyId=123&ImcGenPartyName=abc
    &OAHP=IMC_NG_MAIN_MENU&OASF=IMC_NG_ORG_OVERVIEW
    Error : You are trying to access a page that is no longer active
    thanks
    Yj

    in Login page, get userid and pwd from user and use below query
    String sql = "select fr.responsibility_key responsibility_key";
    sql = sql + " from ";
    sql = sql + " fnd_responsibility fr";
    sql = sql + " ,wf_all_user_role_assignments waur ";
    sql = sql + " ,wf_local_roles wlr ";
    sql = sql + " where waur.user_name=:1";
    sql = sql + " and waur.role_name = wlr.name";
    sql = sql + " and wlr.orig_system = 'FND_RESP'";
    sql = sql + " and wlr.OWNER_TAG='<ur custome>";
    sql = sql + " and fr.RESPONSIBILITY_ID =WLR.ORIG_SYSTEM_ID ";
    get the correct resposnsibility key then use below code
    String sessionid = sessionBean.createSession(request, response, dbcFullPathName, userName, userPassword, appShortName, responsibilityKey);
    String transactionid = sessionBean.createTransaction(sessionBean.mRespInfo[0], sessionBean.mRespInfo[1], sessionBean.mRespInfo[2], dbcFullPathName);
    HMAC macKey = sessionBean.getMACKey(session);
    String url = URLMgr.processOutgoingURL("OA.jsp?page=<PG url>&transactionid=" + transactionid, macKey);
    Do all this in your custom JSP page. Once done then redirect to OA page using URLMgr.processoutgoingURL method.
    Hope this will help you.
    Message was edited by:
    user566918

  • Sender RFC from Third Party System

    I have a vendor who is actually communicating through RFC from third party Application to SAP R/3. Now we are trying have XI in between. Where as with minimal impact on both sides.
    Solution.
    1. Have the RFC made as ZRFC in XI. Let the vendor call the RFC in XI ABAP and internally make an RFC call through XI Interface to R/3 as Sync Interface. Because we need to report the information back to the system where the request initiated.
    2. Have RFC INI file copied as SAP Suggests under one of the folders. Develop the regular RFC to RFC Interface via XI.
    Is there any other alternatives other than the above mentioned solutions? Or out of those 2, which one will provide the best performance
    Appreciate any feedback. Please advice

    That's exactly what we are trying to achieve here. By Eliminating direct connection R/3, we are placing XI in between. But with the budget/timeline constraints from the Partner side, we are trying to have minimal change on the partner side. They might not change something to web service etc...
    Here is the text about INI file
    You can configure the non-SAP RFC client to connect to the sender communication channel in the following ways:
    ■       By defining the parameters PROGID, gateway-host, and gateway-service within the saprfc.ini-file using RFC-SDK.
    ■       By using appropriate parameters in the function RfcOpenEx.
    If you use the saprfc.ini-file, the respective RFC destination has to be of type R.
    All the parameter values used within the saprfc.ini-file or with the function RfcOpenEx should match the entries maintained within the corresponding sender communication channel.
    Example for the saprfc.ini-file is as follows:
    DEST=RFCCLIENTEXT
    TYPE=R
    PROGID=P106646.HKExternalClient
    GWHOST=pwdf2153
    GWSERV=sapgw40
    Please check the following link, for the same  text on RFC Sender
    [Help.SAP|http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm]
    Using the same Sender RFC for non-SAP System, please share any ideas

  • I CAN-NOT install anything from a .pkg

    i CAN-NOT install anything from a .pkg
    i need help
    someone
    when i try to install i get this at the end
    "there were errors installing the software"
    "please try installing again"
    also in disk utility
    i get this
    "invalid file or directory ID found"
    "the volume HD needs to be repaired"
    "Error: the underlying task reported failure onn exit"
    and when i try to repair it from the MAC OSX disk i cant
    i get
    "Error: the underlying task reported failure onn exit"
    also i cant install the BSD as it is a .pkg
    HELP
    Mac mini   Mac OS X (10.4.5)  

    Hi, shoaib.
    You wrote: "also in disk utility i get this
    "invalid file or directory ID found"
    "the volume HD needs to be repaired"
    "Error: the underlying task reported failure onn exit""The disk directory of your hard drive is corrupted. This is the source of your problems.
    If you cannot afford either of the third-party utilities:
    • Alsoft Disk Warrior 3.x (DW3)
    • Micromat TechTool Pro version 4.1.x (TTP4).
    then you will need to follow the instructions in "Disk Utility reports 'Underlying task reported failure' when repairing a volume."
    Specifically, given that your attempt to repair the disk using Disk Utility from your Tiger DVD failed, there are no other solutions available for this problem other than:
    • Attempting repair with the third-party disk utilities cited above.
    • Backing up whatever data can be saved, then reinstalling Mac OS X with an Erase and Install.
    See the article I cited above for details. Sorry to be the bearer of bad news.
    To avoid having to reinstall in situations like this, as funds permit you should consider investing in:
    • Implementing a comprehensive backup and recovery solution. For advice on the backup and recovery solution I employ, see my "Backup and Recovery" FAQ.
    • Alsoft DiskWarrior and TechTool Pro.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Can i use 'iGetter' (a third party download accelerator) to download Mac OS X v10.7.4 update?

    can i use 'iGetter' (a third party download accelerator) to download Mac OS X v10.7.4 update? im running 10.7.2

    Third party download manangers usually end up causing problems when downloading apps from the App Store.
    Try installing the OS X Lion Update 10.7.4 (Client Combo)
    That will update your Mac to v10.7.4 but be aware that file size is 1.4 GB.
    Bear in mind, if at some point you need to reformat or repair the startup disk or reinstall the Mac OSX, you would need to use Lion Recovery which requires broadband access to the Internet via Wi-Fi or an Ethernet connection

  • Can I move applications from one user to another on the same computer?

    If I have two users on one mac, can I move applications from one user to another on the same computer?
    Thanks

    By default, apps are installed for all the users in /Applications

  • Can't installing facebook from iPod Touch and Itunes 9.1.1 from windows 7

    Dear all, anyone can help me with my problem please...... I Can't install facebook from my ipod touch 8GB it mentioned "this program only run with iPhone" why ??? my other friend could install facebook to his iPod
    Second problem i can't run my iTune 9.1.1 into my OS windows 7 after update the software iTunes ,why ??? it mentioned "there's a problem "incompability" please help meeeee...........thank you.

    Hi all,
    I've found the solution in another thread: http://discussions.apple.com/message.jspa?messageID=11296350#11296350
    It's oviously a problem of iTunes 9.1, which does not seem to fin the syncserver. exe or some of its dependent files.
    User icefoxxxx showed me how to solve the problem. Anyway, Apple has to fix this, many people will have the problem:
    Posts: 4
    Registered: Mar 30, 2010
    New! Re: Unable to load provider data from Sync Services
    Posted: Mar 30, 2010 9:47 PM in response to: icefoxxxx
    Reply Email
    you won't believe how I fixed it... my syncserver.exe can't run because some dll is missing, but I notice the dll is in another folder "Apple Application Support". So I copied all files in
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    over to
    C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    and it solves everything!
    Obviously there is something wrong in registering the former folder by the new itunes installation program. Hope next version fixes it.

  • DMS document migration from Third Party DMS server(Omnidocs)

    HI guys,
    I would like to migrate document from Third party DMS server to  sap DMS server.
    What is the apporach.
    1. The thir party dms server is protected with login name and password.
    How i can extract data from the software.
    Please spread your thoughts on this.
    what is the function module to  download the contents of the server. by passing the url.
    with regards
    Giri

    use ALE scenario to send the documents

  • I bought a macbook air and iMac from third party with preinstalled ilife and iworks

    I bought a macbook air and iMac from third party with preinstalled ilife and iworks, can I update to the latest ilife and iworks without being charged even though i did not purchase ilife and iworks on my preowned Macs.  I have no CD's or license for those products?
    thanks

    No, you will not be able to do that.

Maybe you are looking for