Can we install both PI and CE in the same instance ?

Hi,
I have requirement to use EAI and BPM tools in SAP, as i know the tools will be PI and CE, but then to reduce the total cost of the hardware we need to put both PI and CE into the same box. is that possible to install both application in the same instance to reduce total memory used ? because both system also using the same java stack the only different is the installed component.
Please advise ?
Thank You and Best Regards
Fernand Lesmana

Hi Fernand,
is that possible to install both application in the same instance to reduce total memory used ?
Yes, it is possible.
Please advise ?
Not advisable to have PI and CE on same instance. Might face problems as cited by Abhishek.
Regards,
Neetesh

Similar Messages

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Can I install SBO 2005 and 2004 in the same OS(Win XP)

Hi, there
Can I install SBO 2005 and 2004 in the same OS(Win XP)?
Thanks for any help.
Lanjun

Hi Lanjun,
I know you can install both of them together on one computer. I had a document specifying the steps, but cannot find it now. The problem is that you cannot create a new 2004 company or upgrade your 2004 version.
I will look for the document and let you know.
Adele

Can I use both cs and cc at the same time?

Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
Regards
Kasper

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Can I use both iPhoto and Aperture on the same library?

I like some of the features of iPhoto (like faces and places) but prefer to work in Aperture for its rich tool content. Is there any way I can use both iPhoto and Aperture on the same library? Or, import images from Aperture into iPhoto?
Thanks much!
John

I think you may have answered a question I have with the above, but to be sure here is what I would like to do. I currently have iPhoto09 with about 50,000 pictures in it, which seems too much for it to manage. I would like to use Aperture, which I understand is better for managing a large number of photos, but still have iPhoto available to make slide shows, etc. for our AppleTV. Would the process you described above work for that?
Thank you

Can we install Oracle 8i and 10g on the same windows server?

I would like to install the Oracle server 8i and 10g on the same windows server? Is this possible.
Forgive me if this question is already asked.
Thanks in advance!
Jay.

WHICH Windows version? (There's more than one). It would be useful to be a little bit more precise (NT,2000,XP,2003, 32/64 bit) .
For NT and 2000 it is possible to have both 8i and 10g, for XP and 2003 there's no support for 8i at all.

How can I use both Lion and Leopard on the same computer?

I have installed Lion and can't recover documents created by Canvas 9, a PPC app. Can I create a partition to run Leopard, so that I can use PPC apps?

My mid-2010 iMac 27" i3 came with Snow Leopard. My internal hard drive is partitoned into 3 parts - one boot volume for Snow Leopard (10.6.7); one boot volume for Lion; another boot volume for Lion. The two Lion partitions were added to the internal drive without erasing the initial install of Snow Leopard.
I also have an external firewire drive which is partitioned into three volumes: one with a clone of the primary's Snow Leopard 10.6.7; one with Snow Leopard 10.6.8 (built on another clone of the primary); and one used for GP file storage.
That gives me three bootable volumes for Snow Leopard (two of 10.6.7, and one of 10.6.8) and two bootable volumes for Lion. All of those are, in fact bootable - they have all been tested for that by booting to them.
Booting to a different valid OS on a different volume is as easy as going to System Preferences > Startup Disk and then selecting the OS/volume one would like to use on the next restart. Then just restart.
The choice can also be made at booting - as soon as the startup chimes sound, hold down the Option key to bring up Startup Manager. In that screen select the boot volume of choice.

How can I run both Leopard and Panther on the same machine?

Hi,
I currently have a Powermac G5 with Leopard running nicely on it. I have 2 hard disks.
What I would like to do is install OS X 10.3 on the machine so that I can switch between the environments - please can someone explain how to do this?
I'm assuming I need to partition one of the hard drives and have done with the second hard disk (not the startup disk), but I'm nervous about what to do from there and really don't want to mess up what I've already got - please help!!
Many thanks.

if you have two hard drives the easiest might be to install panther on the second hard drive. this way you don't have top partition anything. make sure the drive is properly formatted it should be formatted mac os extended journaled with APM partition scheme. then just boot from the Panther install disk and install panther on the second drive. note that this will only work if your mac originally came with panther. did it?
to switch between installs you can change the startup disk in system preferences->startup disk. then reboot. alternatively, reboot normally and hold option at the chime. this will boot you into startup disk manager where you can choose which drive to boot from.

On my wireless printer can i use both usb and wireless at the same time

i tried to print from coupons,com but it will not i have used coupons.com before with my other printer and weorked fine i have coupons.com looking into it
just wondering if anyone else out there have the same problem

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I install SoaSuite 10 AND 11 on the same computer?

In addition to the already existing SoaSuite 10 on my computer I would like to install the new version 11 as well.
Is this possible or do the interfere each other?
Which Path must be first in PATH environment variable?
Peter

Both can coexist in the same box.
SOA 11g uses the sh/cmd scripts for PATH & CLASSPATH environment variables, so there should not be any issues as such.

Can I install OBIEE 10g and 11g on the same machine?

While I'm waiting for new hardware, I wanted to get started on installing OBIEE 11g on my laptop. Can I do this if I already have 10g installed?
I want to make sure if I install it that it will not impact my current 10g setup. I'm not sure if it overrides certain files and folders or if I can do a separate installation to have both.

Hello everyone.
I have OBIEE 10g on my Production box pointing to the Oracle Database 11g R1 which is also having OWB integrated in it.
Now, I am planning to upgrade OBIEE 10g to 11g and Oracle Database from 11g R1 to 11g R2, so that OWB will also be upgarded, as it is integrated in 11gR2.
I am confused about, how to run RCU on the database, as OBIEE 10g schemas and packages will already be there in the database.
If I run RCU again, what will it do???
Has anyone done this before? or any good document available ?
Many Thanks,
Ahsan.

How can I use both endnotes and footnotes in the same document?

My project requires that the document have both kinds of notes. Thanks.

You may have to split the document into 2, one for each as they seem to be an either or option.
Peter

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

Try one of these extensions for multiple cookie sessions.
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

Can I setup my P1606dn to eprint both Mac and PC at the same time?

Can I setup my P1606dn to eprint both Mac and PC at the same time?

Hi Poindexter65,
There is no setup involved to ePrint from a computer. So, the answer is yes. All you need to do in order to ePrint, is send an email (attaching whatever you wish to print) to the printer's email address.
Here is a link with more information about ePrint and specifications for attachment types, file sizes, etc.: https://h30495.www3.hp.com/help#eprint
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided.
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Can we install both PI and CE in the same instance ?

Similar Messages

Maybe you are looking for