Can we install exchange infrastructure into existing server?

can we install exchange infrastructure into existing server?
I have installed ECC6 IDES,now I want to install XI, Can I install it to ECC6 IDES server ?
how to install ?

Hi
Check this note may help you
Note 883948 NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Regards
Uday

Similar Messages

Can we install Exchange server 2003, 2007 and 2010 on Server 2012 R2 ?

Sir,
I want to know whether Exchange server 2003, 2007 and 2010 can be installed on Server 2012 R2 or not.
Thanks in advance.

You can only install Exchange 2013 SP1 on Server 2012 R2
As far as I know Exchange 2010 SP3 can't be installed on R2 . The other Exchange Servers are too old

Can't install Exchange 2013 after previous uninstall (insufficient user privileges with the same user)

I have installed Exchange 2013 on Windows Server 2012, which ist a member of a Windows Server 2012 R2 Domain. All prerequisites and AD modifications were successfully completed and I could install Exchange 2013. Unfortunately I made a mistake with
the target directory and had to uninstal Exchange 2013. If I start the Setup again, it fails in prerequisite check - the current user should not be a member of Enterprise and Schema admin Group, but it's the same user, which comleted the previous Installation
of Exchange 2013! Do you have any idea how to solve this Problem - I'm running out of ideas.

Inhave tried to run setup /PrepareSchema again and get the following error in exchange setup log:
[03.07.2014 19:25:53.0305] [0] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
[03.07.2014 19:25:53.0337] [0] Validating options for the 0 requested roles
[03.07.2014 19:25:53.0383] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
[03.07.2014 19:25:53.0399] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
After removing all Exchange Parts by ADUC (advanced View) and ADSI Edit (Services) I'm able to install Exchnge 2013 again - the uninstall procedure seems not to work in a clean manner.

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go.

Can I install an SSD into my MSI GE620DX laptop?

Can I install an SSD into my MSI GE620DX laptop?
Couldnt find any information on the site or the manual about that, Im thinking of ordering an SSD but I dunno if I can put whatever type of SSD in there.
The 128gb SSDs in sweden are just in my price-range right now and it would be reeeally nice to check out how fast this thing can run... :D.
My laptop is the i5-2410m-version.
Reason I wanna upgrade to SSD is obviously because of improved performance but also that I can probably turn the current built-in HDD into an external device maybe? I am setting up my laptop for music production and I just want a fast SSD for windows,software. Other HDDs for recording audio, having projects on them and so forth.
The HDD in mine is the 500gb/7200RPM one, I hope I can turn it into an external somehow(read that you can somewhere and I assume most drives can be turned into external HDDs???)

Shouldn't be any problem. You can replace the 2.5" HDD of your notebook with any 2.5" SSD. Be aware that you need to reinstall Windows unless you have a software to clone the current on the SSD.
With an external USB hdd case you can use the HDD as an external drive. However if you erase the current partitions you will loose the possibility of using the F3 recovery with the HDD reinstalled if the Windows on the SSD gets destroyed by a virus or similar problems.

I can not install Waik and mdt on server 2012 so that i can deploy windows 7 please may you help me?

i can not install Waik and mdt on server 2012 so that i can deploy windows 7 on target machine, i have downloaded mdt Waik i got error saying you must install frame 2.0 which needs also adk windows 8. i am using hyper machine.
thank you

Hi Warsame12,
It is worth mentioning that don’t use IPV6 PXE, Windows 7 doesn’t support WDS 2012 deployment over IPv6 PXE. If IPv6 PXE boot is enabled and a
Windows 7 installation is selected, a blank screen will appear and Setup will not run.
The related KB:
Windows 7 client deployment over IPv6 PXE network boot does not work.
http://support.microsoft.com/kb/2803741
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can we install WSUS on a WDS server

Can we install WSUS on a WDS server ?
What are the pre requisites for WSUS server in a domain environment ?
Thanks

Can we install WSUS on a WDS server ?
Absolutely! I ran WSUS & WDS on Server 2008 R2 for many years, and now have WSUS & WDS on a Server 2012 system.
What are the pre requisites for WSUS server in a domain environment ?
There are no distinctions in the prerequisites for use in a domain environment. WSUS is not AD-Aware; it is simply a collection of webservices and fileservices that respond to requests from a Windows Update Agent.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Number of instances that can be installed in a single SQL Server R2 enterprise edition license

How many instances can we install using a single SQL Server 2008 Enterprise R2 license?

Hello,
This is a community forum for technical questions & issues.
For question regarding pricing / licensing please contact a Microsoft sales partner or licensing expert.
Call (1-800-426-9400), Monday through Friday, 6:00 AM to 6:00 PM PST to speak directly to Microsoft licensing specialist.
http://www.microsoft.com/en-us/server-cloud/products/sql-server/buy.aspx
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers

Dears,
I have IBM Flex server with built in storage,
HOW to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?

Microsoft Failover Clusters require shared storage. If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com). If you
use third party software, you will need to follow their instructions for configuring the environment.
Questions on how to configure Exchange environments are better asked in an Exchange forum.
.:|:.:|:. tim

I would like to kwon can I install Microsoft silverlight into ipad2

I would like to kwon can I install Microsoft silverlight into ipad2.

Is it available in the App store? Is, yes you can, if it is not there, no you can't.
Stedman

Can not add new VMS into existing clustered server pool

For some reason, we reinstall VMM (3.1.1-416) with existing UUID and rediscover all VMSs. The process went smooth and the whole system looks clean without dead objects any more. The guest VMs are all working fine. However, the new added VMS in unassigned servers are not displayed in the "Available Servers" when we want to add into existing clustered server pool, but it is shown when we add into unclustered server pool. Anyone has clue or possible way to debug what's wrong.
Thanks,
Shun-Jee Liu

The issue is resolved. The access group in shared iSCSI is not properly configured.

Can't install Exchange Gateway

I'm trying to install the Exchange gateway on an Echange 2003 system. Have installed C1 with snapins and created a secondary GW domain for the gateway on the Exchange server. The secondary domain starts up OK.
However, when I try and install the gateway on the Exchange server, it fails wi the error 'Unable to get Exchange Server Sites for the server servername and the organization orgname'. If I OK that message, it takes me to the dialog to select the server site, etc, but there is nothing to select, so I have to cancel out of the install.
Any ideas?
Rob.

The best approch at installing this gateway is to follow the TID on how to install it.
How to Install the GroupWise Gateway for Microsoft Exchange
TID #7001367
Environment
Novell GroupWise Gateway - 7.x Gateway for MS Exchange
Novell GroupWise 7
Situation
GroupWise Gateway for Microsoft Exchange Install fails to result in working Gateway
GroupWise Gateway for Microsoft Exchange Service will not start
ERROR: "1503: The Service did not respond or the start or control request in a timely fashion."
ERROR: "ERROR (E01) 010012: Unable to get configuration information from the MAPI Session"
ERROR: "ERROR (E01) 010012 MAPI code: 11D"
ERROR: "ERROR (E01) 0323004 - Unable to bind to the Gateway Object"
Resolution
This document is designed to aid in a successful install of the GroupWise Gateway for Microsoft Exchange in regards to "How to Set Rights for Windows users to install and run the Gateway."
The install and configure documentation should be followed in addition to this TID. GroupWise GateWay Documentation Novell Doc: GroupWise Migration Utilities - Table of Contents
The document does not include installation of the Free busy search components. At the time of writting the GroupWise Gateway for Microsoft Exchange is not intended to be used with Exchange 2007. Installing the Gateway on a Exchange 2003 server in an Exchange 2007 environment appears to be a valid work-around for using the gateway in an Exchange 2007 environment.
Install the latest version of the Gateway software. The latest version can be obtained by calling support. The files can be obtained by opening a service request with support. If no additional support is required the service request may be closed at no additional charge.
Assumptions about the server where the Gateway will be installed:
Novell Client is installed
Authenticated to Edirectory as Admin
ConsoleOne is installed
Active directory Users and Computers in installed
Exchange system manager is installed
AdsiEdit is installed (possibly not needed)
The install / running of the GroupWise gateway for Microsoft Exchange has been complicated and usually requires additional attention to rights as a result of change made in Exchange
More information about this change can be noted at “Send As” permission behavior change in Exchange 2003 “Send As” permission behavior change in Exchange 2003.
Preliminary Step to take to insure success before installing the Gateway:
Check for the existance of Gwise address space on current policy and remove. Find Policy in Exchange system manager | go to properties | remove any old Gwise address space and apply the policy to remove address space from invidual users. Check individual users that the Gwise address space was remove.
Find and remove all Gwproxy.dll on all Exchange servers. Delete gwproxy.dll from Program Files\Exchsrvr\address\gwise\i386 directory on ALL Exchange servers. If the file will not delete you may have to stop Exchange services.
Enable the hidden security tab at the top of the Exchange Org to assist in checking for proper rights needed to run the gateway. The following document will assist in enabling the security tab: XADM: Security Tab Not Available on All Objects in System Manager
Create a user to run the Gateway service and remove his membership to groups not needed. IE: remove membership to "users group" as well as any other groups that are not needed. To remove and add membership to a user go to Active directory Users and Computers | properties of the user | membership tab.
Add group membership for user used to install the gateway as well as the user used to run the gateway rights to the following groups: Domain admins, Schema admins, Enterprise admins, Exchange Domain Servers
Use the hidden security tab to verify that the Installer user and the Service Runner user do not have deny rights set to the "send as" and "receive as" attributes. Go to Exchange system manager at the top of the Org | right click and see the new security tab we enabled in Step 3. Check each group the installer and runner are a members of and remove deny attributes from the "send as and receive as" check boxes. If the groups are not visible in the Top portion of the properties page use the ADD button to add the group | highlight the user and check the "send as" and "receive as" rights.
Follow the Install and configure documentation for the GateWay Novell Doc: GroupWise Migration Utilities - Table of Contents
Run the Install for the Gateway.
If the gateway fails to start it is usually an issue with "send as" and "receive as" set to deny. Use ADSIedit.mcs to find a possible deny that is not visible in Step 6. To launch ADSIedit go to Start | run | type ADSIeit.msc (If needed you can install ADSEedit using the following URL suggestions Adsiedit Overview: Active Directory )
NOTE: Use ADSIedit carefully. The goal is to check and set a deny / allow right for the above groups and users. Contact Microsoft support for information regarding the use of this tool.
Using ADSIedit to find Denys to the Mail Store that are not allowing the user to run the gateway:
Set all "Send as and Receive as" rights for the above users and groups to allow. There cannot be any deny on the "Send as and Receive as" for the above groups or users. Not even if the deny is inherited (greyed out.)
Go into ADSIedit by going to Start | run | type ADSIeit.msc
Expand the Configuration Container
Drill down to Configuration/Services/Microsoft Exchange/First Organization/Administrative Groups/First Administrative Group/Servers/Exchange/information Store/First Storage Group/ and not the mail store.
Right click the mail store object in the right hand window of Adsiedit and go to security tab.
Check "Send as and Receive as" and change any Deny to an allow right for the above users and groups.
A Grey check mark set to Deny indicates the right is inherited from above the current container.
Walk up the Tree of containers checking at each section to insure the "Send as and Recieve as" is set to allow for the users and groups noted above.
NOTE: The most common hidden deny that needs to be removed is found for the Exchange Domains Servers Group and at the Servers Container.
Once all Denys for "Send As and Receive As" have been removed allow some time for replication. Server Restart have also shown to be helpful when rights are set correctly but service still behaves as if it is lacking the "Send As and Receive As" allow rights.
Additional Information
What we need to know:
The Gateway needs to login to the Exchange mail store on the local Exchange Server and create a mailbox for the user that is specified to run this gateway. This users rights to the mail store are needed or the gateway will fail to run.
Additional Trouble shooting aids:
Check the Windows Event logs for error when starting the gateway
Set the Gateway in Consoleone to log at verbose logging level
Try starting the gateway as an application during trouble shooting process as it may allow errors to be see that are not logged. To Start the Gateway as an application when installed as a service Go to / GroupWise domain directory / wpgate/ Exchange / Exegate.exe right click and select open to launch.

Cannot install Exchange 2010 on Win Server 2k8R2

I am working in a Hyper-V lab trying to install Exchange 2010 on a Windows Server 2008 R2 server. When the installer gets to the Readiness Checks it keeps failing on the Client Access Role prerequisites, and Mailbox Role prerequisites with the following 2 errors:
Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed.
Unable to access the 'Default Web Site' on this computer.
I have checked in Server Manager and IIS is definitely installed.
I opened the IIS Manager, and from there I *can* browse to the Default Web site.
For the 1st message, there is a link to http://technet.microsoft.com/en-us/library/aa997645.aspx, but that site doesn't contain any useful information for Exchange 2010.
For the 2nd message, there is a link to http://technet.microsoft.com/en-us/library/aa997698.aspx, but I tried that and still get the same error.
Any help is greatly appreciated.
Thanks
James.

Can you make sure that you have installed the pre-requisites for Windows 2008 R2? You may run it again which will install if some components of IIS are missing...
Open Powershell with elevated rights using "Run As Administrator", and run below cmdlets to install prerequisites...
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
Set-Service NetTcpPortSharing -StartupType Automatic
Exchange 2010 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354(EXCHG.140).aspx
Exchange 2010 RC: Quick Installation Guide
http://www.messagingtalk.org/exchange-2010-rc-quick-installation-guide
Amit Tank
MVP: Exchange Server | MCTS: Microsoft Exchange Server 2010, Configuration
MCITP: EMA | MCSA: M | Blog: http://ExchangeShare.WordPress.com
Thanks a lot!
I wonder why the Exchange 2010 installation doesn't just install these features automatically. I guess it's not that hard to let these PS commands run prior to installing Exchange 2010 files.
Ruud van Strijp
Ruud van Strijp - Network Infrastructure Design in the Netherlands. MCSE: 70-270, 70-284, 70-290, 70-291, 70-294, 70-297. Cisco: CCNA, CCDA, CCNP, CCDP.

Possible to install WebCenter tutorial into existing SOADemo instance?

Hello,
I've got SOADemo up and running but am wondering if there are interaction problems between SOA and the WebCenter tutorial. Can I install WebCenter into my existing SOA app server?
Thanks!

Feedback anyone?

Installing Exchange 2013 on Windows Server 2012 R2

Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2
But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported:
- Install Exchange 2013 (without SP1) on Windows Server 2012 R2
- Install SP1 on top of Exchange 2013
If this is not supported, can someone tell me when the Exchange 2013 with integrated SP1 (slipstreamed) download will be released?

yes the SP1 is the full product. if you need step by step instruction to migrate to this new version you can get info here : http://buenoflex.com/install-exchange-2013-sp1/
Arnaud Buonaccorsi - GSX Groupware Solutions
http://www.buenoflex.com
http://www.gsx.com <= The monitoring solution for Exchange and Sharepoint

Can we install exchange infrastructure into existing server?

Similar Messages

Maybe you are looking for