Can we install oracle client over oralce xpress edition??

hello....
Actually i am instally oracle 11g r2 express edition. Over that i have to install oracle client to meed my software requirement.
Can i do so in oracle XE.

for 11.2 XE Supported client versions are 11.2.0 and 12.1.0. (Doc ID 207303.1)
If "Supported" means Oracle will support you, then yes, but all versions from 9.2 onwards will work (OP didn't specify its software requirement).

Similar Messages

Can I install Oracle 8.1.7 Enterprise Edition on Windows 2000 Professional

Sorry if this is a stupid question, but I have Windows 2000 professional edition loaded on my PC and I'm not sure what it allows. Can I load Oracle 8.1.7 Enterprise Edition of the database on this operating system, or do I need to load windows 2000 server software.
Thanks
Ryan

Its a problem with oracle and pentium 4 processors actually. The solution involves renaming or deleting the symcjit.dll in the 8i installation package after you've copied the whole Cd onto your HDD!
I've tried this and it install OK, with a few errors along the way, now I can't get the apache server working, nor on the 9i AS that I've installed as well. Let me know if you get anything useful please?
Michael.
[email protected]

Can't install Oracle 8.1.7 Personal Edition on Windows ME

I am trying to install "Oracle 8.1.7 Personal Edition for Windows 98" on Windows ME. I can't install it. During the install on the Oracle Universal Intaller, on the part where it asks for the Source and Destination, after I click "Next" to install, it gives me a error message: "Invalid staging area. There are no top level components for Windows 95 available for install from this staging area". So I can't proceed with the installation.
The computer I am using is a Pentium 3, 700mhz, 128mb Ram.
On my other computer, it is a Dell Dimension Pentium 4, 1.3 GHz, 128mb ram. When I attempt to install it, while running the D:\setup.exe, before it even loads the install program, it gives me the error message: "Jrew has caused an error in JAVAI.DLL. Jrew will now close. If you continue to experience problems, try restarting your computer". Restarting my computer does not solve the problem.
Can anyone help me out, I really would appreciate it. Thank you.

There is supposedly a fix for this 'stage error' but I tried one of them and it doesn't work. What i have found is that you either create a dual boot Win ME/(98 or 2000 pro) or dump ME as I did and run 98 or 2000 instead. It is painful but unfortunately, seeming necessary. I made it a bit less painful by using Symantec Works to back up all of my other loaded APPS (and Registry entries) Most reloaded to 98 even though they were running in ME.
Good luck.
Michael

Can't install Oracle 8.1.7 Enterprise Edition on Pentium4

I have Pentium4 with 256MB SDRAM and Windows 2000 server installed on it. I'm trying to install Oracle 8.1.7 Enterprise Edition but the setup doesn't run at all.
Is this a problem of O.S. or the processor?

I'm not Oracle support however I had the same issue and this is what I found.
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the Sun JRE and Symmantec JIT will encounter this problem. Windows NT, Windows 2000 and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal Installer (8.1.x) on machines, the installer hangs.
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the Sun JRE and Symmantec JIT will encounter this problem. Windows NT, Windows 2000 and NetWare platforms are confirmed to be affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the post-install
configuration tools will also be affected. Running these tools with
"-nojit" specified will avoid the hang, but it is not simple to specify "-nojit" for some of the products.
The following workaround works for the Windows operating system:
a. Copy only the install directory from the CD to the hard disk, say,
e:\temp.
b. Open oraparam.ini and make the following modifications (Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD instead of a relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the CD instead of a relative path. (i.e.,JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the CD instead of a relative path. (i.e.,OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the first
argument. (i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard drive
(i.e.,e:\temp\install\win32\setup.exe). This will use the modified
oraparam.ini and pick up the information from the CD since the
absolute locations are specified.
Choose a Custom install and choose not to create a database during the
install. This way, the Database Configuration Assistant will not be
launched during installation.
The Net8 Configuration Assistant will still be launched, and there is
no way to suppress it. You will need to kill the Net8 Configuration Assistant if it hangs due to the bug. The installation still will have been successful, and you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8 Configuration
Assistant" and click "Stop". If that does not work, look for the most recent JRE process using the Task Manager, and kill it manually. NOTE: the OUI itself will also have a jre process. Be sure to kill the one with the most recent date, which should be the jre process being used for Net8CA, not the one for OUI itself.
After killing the configuration tools and continuing through the installation to the "End of Installation" screen, you should modify the configuration tools to use "-nojit", then call the appropriate tools from the Start Menu.

Can we install oracle client 32 bit on Linux 64 bit

Can we install the 32 bit applications like the oracle client on to a database server 64 bit and linux os 64 bit ?

This question is two parts which I paraphrase as per my understanding; please correct me if I'm wrong:
1) Can you install 32-bit applications (like the oracle client) on to a 64-bit Linux OS?
Quick and correct answer is: Yes. Most distributions will include 32-bit libraries along with 64-bit libraries for just this purpose.
2) Can a 32-bit Oracle Client "connect" to a 64-bit Oracle Database server?
Yes.
So ultimately, you could install 64-bit Oracle Database on a 64-bit Linux OS, and then continue by installing the 32-bit Oracle Client on the same host (although I see no real reason for this), and then finally use the 32-bit Oracle Client to connect to the 64-bit instance running on the same host.
Hope this is helpful!
Eric

Can I install Oracle client on Mac os X version 10.4.6?

Hello,
My os version:
ProductName: Mac OS X
ProductVersion: 10.4.6
BuildVersion: 8I127
The processor information is "Dual 800 MHz PowerPC G4 2MB L3 cache per processor"
Memory 1 GB SDRAM
120 gig hard drive
I would like to install the Oracle client software so i can run sql*Plus. I'm looking at the quick install guide and it says that "Only Mac OS X Server is supported." and it also says "The operating system version must be Apple Mac OS X Server 10.3.6"
Why would Oracle only create an Oracle client that runs on a mac server? Is this information correct? or can I go ahead and install the client on my machine?
Thank you,
David

No luck for me. :( Even gave total access to the directory and files. But the location of the lib file is not any directory on my machine.
Thanks for any help you can provide.
Eric
<pre>
/usr/ora_instant_client $ll
total 86100
0 drwxr-xr-x 12 root wheel 408B Jul 7 22:22:46 2007 ../
0 drwxrwxrwx 14 root wheel 476B Jul 7 22:47:30 2007 ./
16 -rwxrwxrwx 1 root wheel 15K Jul 7 22:48:25 2007 sqlplus*
1368 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 ojdbc14.jar
728 -rwxrwxrwx 1 root wheel 727K Jul 7 22:48:25 2007 libsqlplus.dylib*
92 -rwxrwxrwx 1 root wheel 90K Jul 7 22:48:25 2007 libocijdbc10.dylib*
64612 -rwxrwxrwx 1 root wheel 63M Jul 7 22:48:25 2007 libociei.dylib*
1800 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 libocci.dylib.10.1
1484 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 libnnz10.dylib
14544 -rwxrwxrwx 1 root wheel 14M Jul 7 22:48:25 2007 libclntsh.dylib.10.1*
0 drwxrwxrwx 3 root wheel 102B Jul 7 22:48:25 2007 instantclient10_1/
4 -rw-rw-rw- 1 root wheel 1K Jul 7 22:48:25 2007 glogin.sql
1428 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 classes12.jar
24 -rw-rw-rw- 1 root wheel 20K Jul 7 22:48:25 2007 README_IC.htm
/usr/ora_instant_client $sqlplus
dyld: Library not loaded: /b/729/sqlplus/lib/libsqlplus.dylib
Referenced from: /usr/ora_instant_client/sqlplus
Reason: image not found
Trace/BPT trap
/usr/ora_instant_client $export
DYLD_LIBRARY_PATH=/usr/ora_instant_client/instantclient10_1
HOME=/Users/xxx
LOGNAME=xxx
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/ora_instant_client
PS1='$PWD $'
PWD=/usr/ora_instant_client
SHELL=/bin/ksh
TERM=ansi
TERM_PROGRAM=iTerm.app
TNS_ADMIN=/usr/ora_instant_client/instantclient10_1
</pre>

Can i install Oracle client with diferent version than database server?

Hi,
I need to install in two PC client 11g R2 version client. One of my database version is 10g R2 and the other is 9i. Can i install in my PC client a Oracle client version different to my database servers (or i need to install exactly de same version)? I need buy any aditional license?
Many thanks in advance.

In general you can install an Oracle client version that is different from Oracle database server. However you should take care of client/server support status on My Oracle Support site: see Client / Server / Interoperability Support Matrix For Different Oracle Versions [ID 207303.1].

How to install Oracle Client 9i 32 bit at windows 7 Pro 64 bit ?

My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?

efe603fc-4926-43ae-8c83-1b5a92c66110 wrote:
My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?
Ummm .... client license?
All license questions should be addressed to Oracle. I believe what you'll find is that the license for client installation is free. What you pay to license and support is the rdbms (server) software.
But all licensing questions should be addressed directly to Oracle. A license agreement is a legal issue, and this forum will have no standing in court.

Error when trying to install oracle client (can't connect to X11 error)

Hi guys,
I need help to install Oracle Client 10g. I am quite a novice so I am totally hopeless when it comes to difficult or linux-kind-of-terms.
I can't use GUI at all, so everything got to be done through putty.exe
my local pc (where the putty is, IP 192.168.8.194) -> linux red hat 4 IP 192.168.8.31 (where the oracle client should be!)
when I run the runIntaller I receieved error mentioning about DISPLAY variable haven't set yet.
I did set it trhough putty as follow
DISPLAY=192.168.8.194:0.0
export DISPLAY
no luck...I still hit an error that eventho this time the error is like below;
=============================================================================
Can't connect to X11 window server using '192.168.8.194:0.0' as the value of the DISPLAY variable.
192.168.8.194:0.0
192.168.8.194:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '192.168.8.194:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
==============================================================================
When I run the xclock using GUI I can see it pop up on my screen, but when I run xclock trhough putty, I see that it just went blank...is that right because I am using putty or what?
Can you guys please help? Everyone that had this problem like find the solution real easy...I just so frustrated because this setting is just not working, and I have no idea what to check. Do I need extra library or something to install this?
Please remember that I can use GUI in my test server but I can't use any GUI at all when I am implementing this.
Thanks thanks thanks.
Daniel -

Hi-
You are right. putty is just a simple console without X11 in it. how come it didn't even cross my mind?
Thanks for the reply. I solved it by using third party software called xdeep, from what I got from internet looks like this and the software you were talking about hold the same purpose. This xdeep is pretty easy to configure and in just few seconds I can launch the installer! Gee...!
For those guys that having the same problem as me then find xdeep software from google and browse on the configure webpage. I found a step by step configuration setting from the internet too and it's real easy.
Daniel -

I can't install Oracle 10g Client in x86-64(Intel EM64T)

Dear All,
Recently, I tried to install the Oracle 10g client in Redhat Enterprise Linux 4.0 with x86-64 (Intel EM64T) platform. As I know,that is either Oracle 9i or Oracle 10g has been certified to Redhat AS 3.0 operating system.
How can I install Oracle 10g normally under all x86-64 platforms? Or, When does Oracle to release out the patch for all x86-64 versions?

Please reffer to Installation section.
Database Installation

Installing Oracle client for Red Hat release 5.5 throws error

I have Linux OS Red Hat Enterprise Linux Server release 5.5 (Tikanga) over 64 Bit and trying to install Oracle client 10.2.1, I downloaded it from
http://www.oracle.com/technetwork/database/10201linx8664soft-092456.html
I am doing silent install and getting error
Using paramFile: /u01/app/oracle/staging/client/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2011-06-29_10-25-50AM/installActions2011-06-29_10-25-50AM.log
can someone let me know that 10.2.1 is compatible with RH5.5 or I need to download software from someplace else.

@Paul M - I followed that metalink note and make changes to oraparam.ini file and add redhat-5 but getting warning messages after install like
The installation of Oracle Client was successful, but some optional configuration assistants failed, were cancelled or skipped
@Aman - I am going to go with 11g client for RH 5.5
Thanks guys...

How to install Oracle client Version 10.2.0.4 on a Windows server 2008

Hi,
I need to install an Oracle client on a Windows Server 2008 (32-bit), how do I do that?
I want to install Oracle client version 10.2.0.4 (Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications).
Pls. advice, I can't find instructions for this installation on Oracle.com or anywhere else.

thx, it looks promising...
but how to run the .jar files and which one to run, both Class12.jar and ojdbc14.jar, to start the installation?
Do I need to install the java runtime environment to run the .jar files?

How to install Oracle client on UBUNTU LInux

Hi,
I want to install oracle client on ubuntu linux. Which version of oracle client works on it and is there any other tool which i can install instead of oracle client?
Regards,
RJiv.

RJiv wrote:
Hi,
I want to install oracle client on ubuntu linux. Which version of oracle client works on it All recent Oracle version support different Linux flavours
The problem is Oracle usually don't provide direct Oracle Client download except for Windows. You need to download the Server installation file and install the client piece. The download files are rather large.
and is there any other tool which i can install instead of oracle client?It depends on what you plan to do with Oracle client and why you need it.
On alternative is instance client, it has direct download for all supported platform.
http://www.oracle.com/technology/software/tech/oci/instantclient/index.html

How to install oracle client on pentium 4

please can someone tell me how to install oracle client 8i on pentium 4 system. the installation is not going automaticlly , and if i explore the cd and press on the setup file the installing didnt start.

8i definitely has problems with Pentium IV processors. The fix is to copy the entire CD to the hard drive and then rename each copy of symcjit.dll to symcjit.old.

Any docs on HOW TO INSTALL ORACLE CLIENT ON OBIEE SERVER?`

Thanks...

Generally speaking the way to installing Oracle Client does not depend directly on the product that is going to use it
If some product requires some specific Oracle Client versions or Oracle Client configurations you should find this information in the product documentation (i.e OBIEE Server) and not in Oracle Client documentation.
You can find Oracle Client documentation (named "Database Client") in the Installation sections of tahiti.oracle.com. For example for 11.2: http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides.

Can we install oracle client over oralce xpress edition??

Similar Messages

Maybe you are looking for