Can we install tomcat using BO installer files

Hi Everyone,
We want to install Business Objects with Tomcat but on 2 separate servers. Tomcat in one and the rest of the BO Servers in another. Can we use the installer files provided by SAP to install just the Tomcat? If yes what should be the right order, install BO servers first and then Tomcat? Your help and suggestions would be very much appreciated.
Thanks in Advance.

Hi
The sequence to setting up a split deployment is to first install the BO Services and CMS on one server (note: deselect the WACS option) and then secondly setup the Web Tier (using the bundled Tomcat software) on the second server.
PS: I prefer rather to use the custom installation option as then you have more control over the components been installed.
After installing the 2 servers, you will have to adjust ceratin configuration files on the tomcat server to point to the correct CMS.
For example:
if ypou have the following servers:
- Server 1 (i.e. bodev) for the BO services
- Server 2 (i.e. webdev) for the Web tier
After the installation the web server will have references to the CMS as follows: webdev:6400, this will have to be changed to bodev:6400 where the CMS is located.
Regards
Derek

Similar Messages

Lync 2013 "Setup can't find or validate an installation file...."

Enterprise client installation.
We're running Windows 7 32bit SP2, Office 2010 32bit SP2.
Attempting to run the install for Lync 2013 (32-bit) on a test system and get the following warning immediately:
"Setup can't find or validate an installation file. Please try installing Office from your installation source, or if you installed from a downloaded package, please re-download and re-install....."
The source Lync 2013 file is direct from MVLS.
Any reason why this install from MVLS refuses to run from the source? Obviously, Lync 2013 wasn't included with Office 2010, so re-installing Office won't resolve this issue.
Any help is appreciated.

Hi,
It may also cause by the issue of the conflict with other software, please use clean boot to test the issue. In this mode install Lync 2013 file again.
You can refer to the link of “How to perform a clean boot in Windows”:
http://support.microsoft.com/kb/929135
If the issue persists, please also try to download Lync 2013 file and install again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error when Installing NW04 using Rapid Installer:FJS-00003 ReferenceError

Hi friends,
As a part of Portal migration, i am installing NW04 using Rapid Installer 2.5.1 for SunOS.
Installation went fine till phase "Database Oracle Patch" but in "Oracle Sidadm Env" phase, an error occured.
Acc. to sapinst.log file:
FJS-00003 ReferenceError: mgt is not defined (in script InstallationScript_10, line 12689: ???)
I searched in SDN and found SAP Note 785921 and 668604. Both are asking us to do the same thing i.e.
After the following line in control.xml
"OraJ2ee.prototype.CreateProfilesFromTemplate = function() { "
insert the line
var mgt = new FileMgt();
I did the same but no luck. I stopped the installation and again started it to see if it works but again the same thing.
Can some one just tell me how to get rid off it?
Regards,
Nilz

Hi Asshish,
After installing the oracle database did you check whether JDK version is correct in the environment variables before installing the rapid installer.
What happens is that oracle resets the JDK version to lower version, which is not acceptable to portal. So after installing the oracle verify the version of JDK in the Environment variables and the JAVA_HOME variable.
Then you try to install the RI 2.5.1
Regards
Arun

How can I install or use Microsoft Office on my iPad 4?

How can I install or use Microsoft Office on my iPad 4?

You cannot. Microsoft has not made a version of Office for iOS. There are however a number of apps that are compatible with Office documents. Apple makes iOS versions of their own iWork apps (Pages, Keynote, Numbers) that are available free if you purchase a new iOS device and that can be purchased separately for older devices. There are also 3rd party combined suites that cost less than the separate Apple apps. Ones often recommended include Documents 2 Go, Quickoffice and Office2 HD.
If you can accept needing a network connection whenever you want to use the apps and have an Office 365 subscription, Microsoft has just released their Office Mobile app, though it has significant limitations. Or a server-based solution such as CloudOn might be an option for you.
Regards.

How can I install and use a mouse on an iPad.

How can I install and use a mouse on an iPad?

This has come up a number of times over the years...you cannot use a mouse with an iOS device such as the iPad since there is no cursor to move around. Interface has to be via the touch screen.

I have a license for LR 5 (Win) and also have the CC Photography membership. Can I install and use LR on Windows PC and MAC?

I have a license for LR 5 (Win) and also have the CC Photography membership. Can I install and use LR on Windows PC and MAC?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

My daughter has a laptop and pc. Can she install and use CS6 on both machines?

My daughter has a laptop and pc. Can she install and use one license of CS6 on both machines?

Yes. You can download, install & activate on up to two of your personal computers (e.g. a laptop and a desktop) as long as they are running the same operating system (e.g. both Macintosh or both Windows. Creative Suite licenses are platform specific.). You can find more details within the End User License Agreement at: http://www.adobe.com/products/eulas/#desktop

Can I create a copy of Pages '09 on iMac to use a installable file on MacBook?

So, I don't like the new versions of Pages, Numbers and Keynote and have been using the '09 version. I have been right clicking and opening files with the '09 version. I tried setting '09 as default but that would not stick, default would slip back to '13. So I had the idea of deleting the '13 version from applications so the default would revert to '09. This worked for Numbers and Keynote but not with Pages. When I tried to open Pages ('09 version, '13 is now deleted) it just hangs. So I sent Pages '09 to trash as well and reinstall Pages from the App store. After install only Pages '13 is available and not '09. So now I have no version of '09 at all. Strange how it works with the other iWork apps and not Pages.
I have Pages '09 and '13 on the iMac and am thinking I could create an installation file on the iMac that I could reinstall on the MacBook. Can anyone instruct me how to do this?
Or give other suggests how I can find a source to download Pages '09 (I already searched the web)?
Many thanks in advance.
Cheers
Rich

This is all the files Pages needs:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
Overwise click on my blue name and email me.
Peter

Can't install any .PKG or .MPKG files with Mountain Lion.

Some weeks ago I found out, that I can't install anymore any programmes that are packed in .PKG or .MPKG files.
Whenever I double click one of theese files, or when I try the "open with" option, I get a system response from TextEdit.App . . .
I tried already some of the advices mentioned in the community forum, but nothing worked so far.
Latest thing I tried was to re-associate these two file types with the Installer - but I couldn't find it anywhere.
I've got an iMac27, late 2009, 16GB RAM, equipped with the latest version of Mountain Lion.
Hope, you can help me - there are some updates (MS Office, MyTomTom, Logitech drivers, ...) that need to be installed.
Thanks in advance,
Dirk.

I would go thus;
1. Back up, preferably using bootable and verified clone(s).
2. Boot into recovery and repair permissions/disc.
3. Apply combo updater if step 2 was unsuccessful. (The link I have posted assumes you are running 10.7.3 as per your signature).

Can't install itunes. error writing to file program files (x86)\Adobe\gnsk_dsp.dll

I can't update itunes.
During installation it says:
Error while writing in file: Program Files (x68)\Adobe\gnsk_dsp.dll.
Check whether you have the right to open that file.
How can I remove this error?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

How many computers can i install and use lightroom 5 with a single purchase?

I've got 2 desktops and a laptop at home. Can i install lightroom 5 and use them on all 3 devices? The database is a cloud system or will it be in the local drive?

you can concurrently install and activate on two computers.
you can save files using adobe's cloud file service (mainly to sync your files) but you should always have local copies saved.

MBP w/10.9.1, how to download the "Install OS X Mavericks" installer file

My MBP runs 10.9.1, would like to make a bootable recovery USB and need the "Install OS X Mavericks" installer to download from mac app store into the applications folder but it won't download because I already have mavericks installed.

You can redownload OS X Mavericks from the Mac App Store, so do it. You can do this even if OS X Mavericks is already installed.
However, if the Mac App Store says that OS X Mavericks is installed and you cannot download the installer, it means that you already have got the installer, so go to Applications folder and you will find it there. Then, use DiskMaker X to create a bootable USB drive with the Mavericks installer.
If you have got a Late 2013 MacBook Pro, note that you cannot download OS X Mavericks from the Mac App Store because that version is not supported. In this case, you cannot create a bootable USB drive, so you will only be able to reinstall OS X through the Recovery partition

HT1926 Why can't I download the itunes installer file to my iPhone?

It is required to run on my PC inorder to use my iPhone as an internet connection!!! *** Apple spend hundreds on the latest greatest brick and it still ***** very unhappy 5s (s is apparently for SUCKER) owner.
I use my phone as a hotspot and I recently had to restore my windows computer, thus deleting the itunes program and installer... Sooooo I figure no big deal the iPhone shows up in windows 8 with a drive labeled "internal storage" why can I not simply download the windows installer file to that folder on my iPhone and run it on my PC ( much like a very over priced thumb drive) but no sir apple prohibits it's iPhone from downloading .exe files to anywhere on itself through safari ***???? Yes I can go to any public library and download it to a thumb drive in the morning but what to do all night???? ..... I got it vent about the infinite ways the control misers at Apple find to make the simplest of tasks next to impossible... Will once again be an android user in the bear future.... Expense is justified in defense if common sense... So to you apple I give -1 of 5 stars for overbearing control freak power hungry activities!!!!

It's a phone, not a thumb drive. If you want to download an .exe file to a thumb drive, then buy one. We are not Apple here - we are just users like you, and this is a user to user technical help forum. So, if you have a technical question please ask it.
Otherwise, you are wasting your breath.
Cheers,
GB

How can I install FL Studio (a installation dvd for Windows) on my macbook?

I've got a installation dvd (downloaded) for FL Studio but it is for Windows. I've read that you can set Windows softwares on your mac with Boot Camp. Can I do that with FL Studio 11 as well?

You need to install Windows OS first. One option is to use Bootcamp using How to install Windows using Boot Camp - Apple Support.
You should check System Requirements for FL Studio 11, before you go further. From http://www.image-line.com/flstudio/
FL Studio system requirements:
2Ghz Intel Pentium 4 / AMD Athlon 64 (or later) compatible CPU with full SSE2 support. The faster your CPU and more cores it has the more you will be able to do simultaneously. Download and test the demo!
32 or 64 Bit versions of Windows 8.0/8.1, Windows 7, Vista, XP (with service pack 3)
(or) Intel Mac with Boot Camp / Windows.
Running XP (with service pack 3), Vista or Windows 7 (in 32 or 64 Bit)
(or) Intel Mac with OS X 10.8 or 10.9 for the FL Studio Mac OS X BETA (Crossover Wrapped)
Attention: Yosemite not supported.
1 Gb or more RAM recommended
1 Gb free disk space
Soundcard with DirectSound drivers. ASIO/ASIO2 compatible required for audio recording (FL Studio installs with generic ASIO4ALL drivers)

Where can I download a full iTunes installation file?

I need to install iTunes on a Windows 7 computer where the iTunes site is blocked. This means running the usual setup.exe won't work because that then tries to download the rest of the iTunes installation files - and that's not going to happen.
A few years ago, I managed to find a full installation file (80-90MB) and did this successfully - but can't seem to find one now.
Anyone know a link where the full installation file is available ?
regards
Ian

See the Further Information area of Troubleshooting issues with iTunes for Windows updates for direct links.
tt2

Can we install tomcat using BO installer files

Similar Messages

Maybe you are looking for