Can we keep Decision workitem in two users SAP inbox after canel action ?

I have a requirement like " Decision workitem is going to two SAP Users Inbox , when one user opens the work item and choose the cancel and keep workitem in inbox in that case also its disappering in other user's SAP Inbox"
is there any way to keep the work item in both users inbox when one person selects CANCEL AND KEEP WORKITEM IN INBOX ?
Please give me your input.
Thanks and Regards,
veerabrahmam

Rick Bakker wrote:
Hello,
>
> Is this in SBWP or UWL?
>
> This seems to be the SAP standard in some scenarios. You could have the workflow test for Reserved and unreserve it but then what happens if it was reserved on purpose.
>
> regards
> Rick Bakker
> hanabi technology
Hi Rickk ,
it is SBWP
it is intresting to see that case if one of approver reserves it for the purpose of evaluating later.
the thing is our onsite consultant asked like is it possible to keep the decision in the two approvers SAP Inbox after selecting cancel and keep workitem in the inbox.
is that possible ?

Similar Messages

Send workitem to two users

Hi All,
I need to send a particular workitem to two users. One user is a fixed user and can be hard coded, the other user will be the initiator of the workflow. I have tried creating a container element, type SWD_AOBJID(dict data type radio btn) with multiline with the fixed user as initial value in the container and used container operation, add to table assignment type, to add the second user. But the workitem only reaches the initiator.Need some help on this.
Regards,
Shantanu.

Hello,
Check in the workflow log if the multiline container element really has two values and if so, if they're similar (eg both preceded by US). If so, it should work.
If not, try making it a multiline container like SWWWIHEAD-WI_AAGENT
regards
Rick Bakker
Hanabi Technology

How can you keep the caps lock on and not unlock after each letter?

How can you keep the caps lock on and not unlock after each letter?

I'm not aware of an online keyboard that is available and can do this. Most likely it would need to be a function of the app itself (which can and sometimes do add functionlaity to the keyboard).
Wireless keyboard might handle that, if that's an option for you.
I work in IT myself, and IMHO the iPad isn't the ideal device for coding or scripting work.

Send Workflow email to User SAP Inbox with a Popup and cproject link

Hi,
I am working SAP portfolio and project management workflow.
Requirement: Trigger workflow when Portfolio Execution Decision Point status changes,
We have to send two email notifications as part of the requirement;
First notification should go to user’s (Only one user) SAP Inbox, Containing two links
Popup link (It will contain list of question which the user has to confirm) if he
confirms we have to send second email notification. (Pop-up layout is attached)
Link for the user to navigate to SAP PPM cProject to upload the documents. (NWBC)
The second notification should go to Outlook of the users (via group email) with Link for the user to navigate to SAP PPM cProject.
We can trigger the workflow using event DECISION_POINT_STATUS_CHG in Class CL_RPM_DECISION. My question is how should design the pop-up and incorporate the Pop-up and cproject link in first notification email sent to user SAP Inbox.
Please let me know if you need more details.
Thanks & Regards,
Amit Singh

We use transaction NWBC to login to netweaver business client. Then from there we navigate to Project management view and double click to select the project. It opens project element --> Collaborations tab. There we select the folder link. (screenshot attached)
Regarding addition of multiline container element (Table) let's say 'A'; I create multiline container element A in Workflow element list, Populated element A using a utility class/method assigned to a background task.
Then, I created a user decision task, inside the task container another multiline container element 'B' with same type and I did binding b/w workflow container element 'A' and task container element 'B'.
Now, I am passing &B& in the decision task description. If I execute the workflow, The user decision task description is blank.
Secondly, I did not get any pop-up asking how to display it (all lines with line break).
PS: My internal table also has only one field.
Am I doing something wrong here?

How can I use Microsoft Office on two user accounts on one IMAc?

Dear all,
I have installed Microsoft Office 2011 on my IMac which I have recently bought. I did this on the (at that time) only user account in place: the administrator account.
A little time after this my wife and I decided it would be much easier to us to make an additional user account on the same computer for my wife (also with administrator rights), so we could have our own settings, desktop preferences etc. So now we have two user accounts/profiles on one Imac, so far so good.
But when my wife signs in on her account, she is not able to use Microsoft Office . Office seems to be only available to the user account on which it has been installed initially: 'my' account.
Can anyone help us out here and tell us how we can make Office available to my wife's user account as well? I understand that the licence of Office is restricted to one computer, but what about two accounts on the same IMac? I mean, it is still one computer, one 'home', one family etc.
We would appreciate your help here!
Kind regards,
Jurjen

As long as you installed MS Office into its default location (the top level /Applications folder) it will be available to all user accounts on the Mac.
As far as licensing is concerned you only have to enter the license code once, which you should do right after installing MS Office, in the same admin account you installed it from, by opening any one of the MS Office applications. There is no additional licensing required for additional user accounts on the same Mac.
Each user account is able to run the Office apps. The only thing you will have to do is go through an initial setup screen in each user account (but this setup does NOT involve entering any additional license codes).
You may have problems if you installed MS Office in a particular user account (i.e. NOT in the top level /Applications folder).

How can I keep the name of the user around for each JSP without asking user

I have a number of JSP pages that I give the user access to once they login successfully. I want to be able to keep the name of the user present on every page without having to ask them for it each time.
How can I do this? Currently I have a user object that is access through use of a request bean in my JSP's.
Any suggestions???

Thanks for the help. A few questions though...
Can you just clarify how the 2 different SessionTest2.jsp's differ. I am right in thinking that the second one will instantiate a new bean object which if I do every time I go to the page, I will be getting the same name but in a different session each time. In the first SessionTest.jsp, I get the same name but from the same session object each time??
Please clarify???
SessionTest1.jsp
<%@ page language="java" import="test.*" %>
<jsp:useBean id="testBean" scope="session"
class="test.TestBean" />
<jsp:setProperty name="testBean" property="name"
value="ZZZZZ" />
<jsp:setProperty name="testBean" property="status"
value="Married" />
<%
     response.sendRedirect("SessionTest2.jsp");
     return;
%>
SessionTest2.jsp
<%@ page import="test.*" %>
<jsp:useBean id="testBean" scope="session"
class="test.TestBean" />
<%
out.println("User Name is : "+testBean.getName());
%>or SessionTest2.jsp
<%@ page import="test.*" %>
<jsp:useBean id="testBean" scope="session"
class="test.TestBean" />
<%
TestBean testBean =
(TestBean)session.getAttribute("testBean");
     out.println("Name is : "+testBean.getName());
%>Hope this helps.
Sudha

Can same work be shared by two users with different information

how to access workbook attached to same table to be access with two users in discoverer viewer/plus

I assume that you each have an iTunes folder in your own Music folders. This will contain iTunes lIbrary.itl - the library database - an iTunes Music folder which should be empty as you have all your music in shared music.
Also I assume you have your music folder in your shared music folder and all your music is there.
You need to choose one of your iTunes folders to use for the shared database.
Copy this iTunes folder from your own Music folder into shared music. Delete the empty iTunes Music folder there, move it somewhere like the desktop if it is not empty.
Now move the folder containing your music folder into your iTunes folder so it replaces the one you deleted/moved. Rename it "iTunes Music" if that is not already its name.
Now do a shift key start. Hold down the shift key and start iTunes. Keep holding the shift key until you are prompted to choose/create a library. Select choose and navigate to the iTunes folder in Shared Music and choose iTunes Library.itl.
Check to see if it has worked.
Repeat the shift key start for the other user to connect to the shared library.
Note that you will have shared playlists, counts and ratings.
If either user is not an administrator, you will need to ensure the permissions for the shared iTunes folder allow write access for that user. Limited users do not normally have write access to folders they did not create.
If my assumptions about you set up are not correct you will need to adjust the method accordingly.

Can I keep the CC value when user click the REPLY TO button in outlook?

Hi all,
I have set the CC value when I send email out. But when user reply the received email, the CC value will be displayed in the TO field. If anyone knows how can I keep the CC value unchanged when user reply the received email?
Thanks very much.

It depends entirely on the mailer they're using, you have no control over it.

Decision WorkItem is not coming in inbox

HI,
I have created a customized workflow, in which i am showing a document and then taking user decision on that document wheather to reject or approve the document. The workflow is running fine in client 100. But in testing client 200 it is not showing decision step to the user. After showing the document it comes back to inbox and don't ask for the decsion as its doing in client 100.
Workflow is not showing any error. It is going to decesion step but not doing anything.

HI:
Check with the Basis consultant that did any body changed the password of the WF-BACTH user ,
it might happen some times if the user password is changed then the workitems do not reach to the Inbox
Another option you have to execute the function module RH_LOCAL_INBOX_GET to check if the workitem is being picked.
Next one SWWORGTASK and SWWUSERWI tables and check your user name should have prefix 'US'.
Regards
Shashi

Deleted workitems are moving from sap inbox to other inbox

hi,
The client is receiving the workitems which are deleted from sap inbox in their inbox. How the issue can be fixed?
Thanks,

Hello,
"The client is receiving the workitems which are deleted from sap inbox in their inbox"
How are they "deleting" workitems?
What do you mean by "sap inbox" - the SBWP mail inbox or the SBWP workflow inbox?
What do you mean by "inbox".
A bit more clarity, please.
regards
Rick Bakker
Hanabi Technology

Workitem not received in SAP inbox(SBWP)- In SOST status is waiting

Hi Experts,
After executing workflow , I am not getting the workitem in SAP inbox.
I am sending mail using BOR Object type SELFITEM and method SENDTASKDESCRIPTION.
In SOST , status is in waiting ( Send method - Remote ).
For Send method - via Internet its working fine . Mail is sent to external mail address. But for Send method Remote send requests are in waiting status.
SAPCONNECT job also getting executed every 5 mins in back ground.
SCOT-RML routing exists with Address area * , Node in use check box i, Node supports : connection test, status, trace , Supported address types - R/3 is checked.
Please let me know any other settings has to be done to send workitem to SAP inbox.
Thanks & Regards,
Priya.

Hello,
"After executing workflow , I am not getting the workitem in SAP inbox."
You are confusing workitems with emails. SENDTASKDESCRIPTION = email.
regards
Rick Bakker
hanabi technology

Error Idocs automatically transffered to users SAP Inbox

Hi,
I need to configure, such that Idocs with certain error messages will be automatically transffered to the users inbox (SAP inbox) based on the plant in the Idoc.
Understand that to achieve this, will have to maintain the org plan in transaction PPOME. But what are the other things that need to be done?
Would greatly appreciate step by step instructions to achieve this.
Regards,
Mick

Hi Mick,
Rajeev Kasturi uses almost 10 pages in his book SAP R/3 ALE and EDI TECHNOLOGIES to explain.
You have to do a complete workflow basic config including not only org plan but also org usnits, positions, assignments.
Activate event triggering and linkage
Acticate workflow generally
configure partner profile parameters for receiver of notification
Set ALEAdmin in EDI system table.
God luck!
Regards,
Clemens
P.S.
On HELP.SAP.COM you will find lots of helpful hints searching for keywords IDOC WORKFLOW
Message was edited by:
Clemens Li

Can I keep an app on one user account, and delete it on the other?

I have two separate user accounts on my MacBook Pro (OS X Lion); one for school and one for personal use. I cannot have Oovoo on my school account, because I cannot access my school's wireless network with Oovoo (because it is a form of social networking). Can i erase Ooovoo from my school account, but keep it on my personal account?

You probably can, but I'm not sure I see the point. Just don't use it on the school network. But if the temptation is too strong, and if "Oovoo" (which I've never heard of) is a self-contained application, move it into the home folder of your personal account. You can create an Applications subfolder and put in there.

How can I keep the selectedIndex of two JLists the same?

I have two independant JLists. I have one button to add items from two textfields to the lists. I also have one button to remove the selected items from the lists. However because the items in both JLists are related I want to make sure the selected index of one is always equal to the selected index of the other. HOW!

OK, so here is the current code, there must be an easy way to do it, Swing gurus please help.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.text.*;
public class ListDemo extends JFrame
                      implements ListSelectionListener {
    private JList list;
    private JList list2;
    private DefaultListModel listModel;
    private DefaultListModel listModel2;
    private static final String hireString = "Add";
    private static final String fireString = "Remove";
    private JButton fireButton;
    private JTextField employeeName;
    private JTextField percent;
    private JSlider per;
    public ListDemo() {
        super("ListDemo");
        listModel = new DefaultListModel();
        listModel.addElement("Alison Huml");
        listModel.addElement("Kathy Walrath");
        listModel.addElement("Lisa Friendly");
        listModel.addElement("Mary Campione");
        listModel2 = new DefaultListModel();
        listModel2.addElement("100");
        listModel2.addElement("80");
        listModel2.addElement("50");
        listModel2.addElement("10");
        //Create the list and put it in a scroll pane
        list = new JList(listModel);
        list.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
        list.setSelectedIndex(0);
        list.addListSelectionListener(this);
        JScrollPane listScrollPane = new JScrollPane(list);
        //Create the percentlist and put it in a scroll pane
        list2 = new JList(listModel2);
        list2.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
        list2.setSelectedIndex(0);
        list2.addListSelectionListener(this);
        JScrollPane listScrollPane2 = new JScrollPane(list2);
        JButton hireButton = new JButton(hireString);
        hireButton.setActionCommand(hireString);
        hireButton.addActionListener(new HireListener());
        fireButton = new JButton(fireString);
        fireButton.setActionCommand(fireString);
        fireButton.addActionListener(new FireListener());
        employeeName = new JTextField(10);
        employeeName.addActionListener(new HireListener());
        String name = listModel.getElementAt(
                              list.getSelectedIndex()).toString();
        employeeName.setText(name);
        per = new JSlider(JSlider.HORIZONTAL, 0, 100, 50);
        per.setMajorTickSpacing(10);
        per.setPaintTicks(true);
        per.setPaintLabels(true);
        percent = new TextField(10);
        percent.setValue(new Integer(1));
        percent.addActionListener(new HireListener());
        String name2 = listModel2.getElementAt(
                              list2.getSelectedIndex()).toString();
        percent.setText(name2);
        //Create a panel that uses FlowLayout (the default).
        JPanel buttonPane = new JPanel();
        buttonPane.add(employeeName);
        buttonPane.add(per);
        buttonPane.add(hireButton);
        buttonPane.add(fireButton);
        Container contentPane = getContentPane();
        contentPane.add(listScrollPane, BorderLayout.CENTER);
        contentPane.add(listScrollPane2, BorderLayout.EAST);
        contentPane.add(buttonPane, BorderLayout.SOUTH);
    class FireListener implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            //This method can be called only if
            //there's a valid selection
            //so go ahead and remove whatever's selected.
            int index = list.getSelectedIndex();
            int index2 = list2.getSelectedIndex();
            listModel.remove(index);
            listModel2.remove(index2);
            int size = listModel.getSize();
            int size2 = listModel2.getSize();
            if (size == 0) {
            //Nobody's left, disable firing.
                fireButton.setEnabled(false);
            } else {
            //Adjust the selection.
                if (index == listModel.getSize())//removed item in last position
                    index--;
                list.setSelectedIndex(index);   //otherwise select same index
            if (size2 == 0) {
            //Nobody's left, disable firing.
                fireButton.setEnabled(false);
            } else {
            //Adjust the selection.
                if (index2 == listModel2.getSize())//removed item in last position
                    index2--;
                list2.setSelectedIndex(index2);   //otherwise select same index
    //This listener is shared by the text field and the hire button
    class HireListener implements ActionListener {
        public void actionPerformed(ActionEvent e) {
            //User didn't type in a name...
            if (employeeName.getText().equals("")) {
                Toolkit.getDefaultToolkit().beep();
                return;
            //User didn't type in a percent...
            if (percent.getText().equals("")) {
                Toolkit.getDefaultToolkit().beep();
                return;
            int index = list.getSelectedIndex();
            int index2 = list2.getSelectedIndex();
            int size = listModel.getSize();
            int size2 = listModel2.getSize();
            //If no selection or if item in last position is selected,
            //add the new hire to end of list, and select new hire.
            if (index == -1 || (index+1 == size)) {
                listModel.addElement(employeeName.getText());
                list.setSelectedIndex(size);
            //Otherwise insert the new hire after the current selection,
            //and select new hire.
            } else {
                listModel.insertElementAt(employeeName.getText(), index+1);
                list.setSelectedIndex(index+1);
            //If no selection or if item in last position is selected,
            //add the new hire to end of list, and select new hire.
            if (index2 == -1 || (index2+1 == size2)) {
                listModel2.addElement(String.valueOf(per.getValue()));
                list2.setSelectedIndex(size2);
            //Otherwise insert the new hire after the current selection,
            //and select new hire.
            } else {
                listModel2.insertElementAt(String.valueOf(per.getValue()), index2+1);
                list2.setSelectedIndex(index2+1);
    public void valueChanged(ListSelectionEvent e) {
        if (e.getValueIsAdjusting() == false) {
            if (list.getSelectedIndex() == -1) {
            //No selection, disable fire button.
                fireButton.setEnabled(false);
                employeeName.setText("");
            } else {
            //Selection, update text field.
                fireButton.setEnabled(true);
                String name = list.getSelectedValue().toString();
                employeeName.setText(name);
            if (list2.getSelectedIndex() == -1) {
            //No selection, disable fire button.
                fireButton.setEnabled(false);
//                percent.setText("");
            } else {
            //Selection, update text field.
                fireButton.setEnabled(true);
                String name = list2.getSelectedValue().toString();
//                percent.setText(name);
    public static void main(String s[]) {
        JFrame frame = new ListDemo();
        frame.addWindowListener(new WindowAdapter() {
            public void windowClosing(WindowEvent e) {
                System.exit(0);
        frame.pack();
        frame.setVisible(true);
}

Can I keep the data from multiple users on a Time Capsule separate?

I have a Time Capsule which I use as a wireless router, etc. Everything is working fine. I have another user I'd like to allow to back up data to the same Time Capsule (using Time Machine as well). However, I'd like to keep the backed up data separate so if there was ever a need for a restore, our data wouldn't be jumbled together. It appears that there is no way to back up my data to one folder on the Time Capsule, and this person's to another...or am I naive, and the Time Capsule is doing this for us automatically?
Regards.

Yes, Time Machine backs-up your entire system, unless you specifically tell it not to. So that user's stuff is already being backed-up. See #26 in Time Machine - Frequently Asked Questions.
The backups are in the same folder hierarchy, with the same permissions, as on your Mac; so each user is separate, and even an Admin user doesn't have access to a different user's files.
When you do a full system restore from your backups, everything is copied back, just as it was.
Via +Setup Assistant+ or +Migration Assistant,+ you can restore selected users and their data to a different Mac, either from your backups or directly from your Mac.

Can we keep Decision workitem in two users SAP inbox after canel action ?

Similar Messages

Maybe you are looking for