Can we maintain role specific number ranges?
Can we maintain role specific number ranges in sapcrm..ex i want to give number range between 0-100 to role sold-to-party. is this possible ?
Thanks and Regards,
Ravi
Hi Ravi,
You cannot maintain an explicit relationship between the number ranges in CRM and roles.
To configure number ranges you have to define groupings in CRM.
While you create your BP, it is this point of time when you have to specified the grouping you want to use (indirectly the number range assigned to it). This will decide the number for the BP.
Best Regards,
Pratik Patel
<b>Reward with POints!</b>
Similar Messages
-
CC01 how can i choice a specific number range ?
Dear
In trx. OS53 i have defined two different internal number range object for change master record.
When I create a new change master how can I choice a specific number range ?
Thanks.Hello,
If my understanding is correct then its internally in the system for the type - Change master and ECR the change number
object used is AENNR and where in you can assign a common number range group and it will be used for creating change
numbers of both these types.It's not as like the production order type where you can link a different number ange for each
order type.
In the standard SAP to set of number range (one internal numbe range and one for external will be assigned) exists.so aaume for CC01 you can make use of the internal number range,where during CC01 without any value for the field change number you can proceed.When creating through CC31 you can make use of external number range by giving the change number as the input and you save the data.
Hope the information is useful
Regards -
How can I capture a specific number of screen caps
Using final cut or any other application, how can I capture a specific number of screen caps? Each video will have a different length.
Bob,
Please clarify your question. Are you asking about screen captures? If so, what software are you using and what does this have to do with FCP?
-DH -
Can we maintain division specific credit limits?
Hi All,
we have one company code & one Cr.Control area.
but we have 2 sales areas.
eg: 1000/10/AA &
1000/10/BB.
My client wants to maintain division specific credit limits like
div:AA- $4000
& BB- $6000.
Total Credit control area limit -$10000.
in FD32- we can maintain customer/cr.control area specific limits only.
Can we maintain division specific?if yes,where can we enter 2 different limits to same customer.
plzz reply asap.
*reward points sureSol'n: for all those who would like to know, what we have adopted is,
We create Sales area wise Credit control areas & assigned to respective sales area in IMG as well as in CMR.
we have assigned multiple credit control areas to a single comp code
( IMG - FI - AR/AP- Credit Management - Credit Control account - Assign Permitted Cr.control areas for Comp code)
then,
In FD32-
Maintained Customer credit sheet as desired such as
Cr.Control -1 = $4000
Cr.Control - 2 = $6000
But the thing is we have to manually monitor these limits at the time of FD32 creation ( what is max credit limit we are offering, how much is allocated for particular Cr.Control area which means division)
Hope it helps in understanding.
any more plz revert -
No Relationship found to partner error..in Maintaining the ASN Number Ranges in SNC SC
Hello SNC Gurus,
We are working on one of SNC implementation project. We have to implement three Scenarios 1. Purchase Order Processing 2. Release Processing 3. Supplier Managed Inventory. I have done the configuration part perfectly in SNC for the above 3 scenarios.
I am facing an issue when i am performing the activity Maintaining the ASN Number Ranges activity.
Exactly the Error message is " No Relationship found to Partner **************(Partner No)
Here i created different partners to different Users for example for Customer Users and Supplier Users seperate business partners.
When i am trying to maintaining the ASN Number Ranges in SNC, I am getting the above issue. Not able to move forward and struckup this particular point. Please reply me the solution to overcome this issue, if anybody faced the above kind of issue earlier in your project expieriances.
Thanks,
SN.Hi Bharath,
Here in i am confirming the below answers for your questions
1. Yes its assigned to Partner. Its assigned to Customer.
2. Customer View -- Via /n/sca/ich_c t code.
3. I am defining the number range interval for the Customer. which my user id already assigned to Customer.
Here i am facing the issue in 2 activities. Facing the No Relationship Found to PartnerNo error in 1.. Maintaining ASN Number Ranges Attribute
Facing the error with " You are not authorized to maintain the Customer or Supplier " in 2. Maintaining ASN Number Ranges Intervals.
This is the input i entered in SNC Web UI path ASN Number Ranges Attribute Activity : Master Data --> Number Ranges --> Number Range Attributes: Interval Type : ASN, Customer : 1000 , Supplier : Vendor which is CIFFed to SNC. Append/Replace : A, Prefix : A2, No Overwrite : Check box should select , Max Number Length: 10
For Maintaining ASN Number Ranges Intervals activity : Customer : 1000, Supplier: 390001, IntervalFrom : 00000001 , IntervalTo : 19999999
Please let me know for any more information required. and reply back to me based in the above inputs mentioned is there any route cause to resolve this issue.
Thanks,
SN -
Can't phone a specific number on my 7373
Can anyone help - my neice can't phone a specific number on her phone does anyone know what the problem could be. Have checked the number barring etc. Any tips ??
Is that a normal number or a network service number? What happens when calling? No one can help you unless you provide more details.
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam ! -
BP creation in CRM WebClient - Role and Number Range assignment
Hello,
I have the requirement to specify a particular number range and BP role when an Account is created in the CRM WebClient Interface.
For example as standard, when an employee is created through the CRM WebClient (BSP component BP_EMPL) the default employee role (BUP003) and the default number range are assigned to the BP.
I would need to specify a different number range and role to the employee
I've tried to configure the Account Identification profiles (activity "Define Account Identification Profiles" in customizing); with that activity you can specify which role and which number group you want to use for the BP (account) creation. However this customizing is affecting the IC WebClient only and not the CRM WebClient.
I was wondering if a similar customizing activity exists for the CRM WebClient (in particular for the BP_EMPL application), or if there's a way around this.
Anybody has an idea about how to solve this?
Any help would be greatly appreciated, thank you in advance.Hi all,
I have done this by defaulting the bp group in the BADi
1.Go to the se18 and select BADI_CRM_BP_UIU_DEFAULTS and select the interface IF_UIU_BP_DEFAULTS
2. Go to the method IF_UIU_BP_DEFAULTS~GET_DEFAULT_VALUES and you can write your logic here to default the grouping.
In my case I wanted all accounts created to be defaulted to a particular grouping and my code looks like this
lv_name1 = lr_current->get_property_as_string( iv_attr_name ='BP_CATEGORY' ).
IF lv_name1 IS NOT INITIAL.
IF lv_name1 = '2'.
lr_current->set_property( iv_attr_name = 'BP_GROUP'
iv_value = '0060' ).
ENDIF.
ENDIF.
Thanks & Regards,
Sanila -
Have to maintain a specific number apart from material number in MMR
HI All,
We have a specific number(X) for some materials that we want to enter in a material master, and when we create a sales order that number(X) along with material number should populate in sales order.
is there any field provided by sap to fulfill this requirement.There is no standard SAP fields provided to handle your requirements in the material master.
You may need to use any of the unused fields in the material master. Following options I could think of;
1) Use of Old material number field (MARA-BISMT). But this field will not flow into sales order. You may go with an enhancement to add this field in the sales order -> item level.
2) Use of basic text or sales text from the material master. You need to add addtiional text type in sales order -> item text level in t.code VOTXN. By this way, when a number is maintained in the material master text field, this will automatically gets copied into sales orders.
3) Use of EAN/UPC field (MEAN-EAN11) field. I am not in favor of using this field as this may be needed in other purposes like electronic transmission of data with government entites. If this field is not used in your business, you can think of this also.
Using any of the above may eventually need development of customized report for your final reporting requirement. I am not sure whether any standard report will provide the details on what you are looking for.
Regards, -
Can i maintain a same number for both the customer and vendor
Hi all,
i have a scenario, as a vendor is supplying some assembly components to the client. the client is assembling the components. and sending the same to the vendor
since the same person is acting as a vendor and a customer i want a common number for both the vendor and customer in their master data's.
Thanks
KV
Edited by: krishna vamshi on Nov 27, 2010 12:20 PMIt's not mandatory to use the same ID for vendor and customer if they are the same entity, you can use different IDs w/o any problem.
It might be difficult, if you are using internal number assignment. It may occur that the ID is already occupied by a vendor or customer.
You can link your customer to your vendor both in XK01/XK02 (LFA1-KUNNR; control tab) and XD01/XD02 (KNA1-LIFNR; "Control Data" tab). One assignment is enough.
In this case you can always see, which customer belongs to which vendor.
Sometimes plant vendors, customers are defined via external number assignment, to have the same ID as the plant, but this should be decided in advance...(separate account group is used generally, with separate number range) -
RE: where can I maintain Vendor Article number
HI,
In SD, I can maintained the customer article number.
In MM, where can I maintain the vendor article number.
There is a field in Purchase info record.
Beside here, where else can I set it up?
Thanks
ByeDear Colin,
The vendor article number can be maintained either in info.record OR the purhcase order. In the info.record, you can find this in vendor data tab under General data. On the other hand in the purhcase order, you can find the same field in the material data tab in the "item details" section.
If you maintain the vendor article number in the info.record, then it is copied to the purchase order automatically.
Regards
Venkat -
I have an unlocked iPone. Have not had a single problem with it, albiet this one.
For some reason I can't text a specific international cell - Amy.
I purchased this handset in the US and text Amy with no problem.
Since returning to NZ I have not be able to text her.
Today, I swapped sim cards with my flatmates iPhone. With my SIM in my flatmates iPhone I was success in texting Amy. With his SIM in my iPhone I couldn't text her.
Help!!!!Hi dlmilla.
Are you trying to send via iMessage or via traditional SMS?
How does the number looks when you trying from your phone? Do you have the countryprefix before the number?
Exempel, here in Sweden our country prefix for telephonenumber is +46. So if I am outside the country, say Germany, then I need to but the +46 before the number if I will contant someone with a swedish SIM.
Here you have list of countrycodes http://en.wikipedia.org/wiki/Country_calling_code
Hope that helped. -
How to maintain two different number ranges in OM for positions?
I have a requirement where i want to create two different number ranges for Positions in OM. Please also explain me the process ?
Edited by: priyeshosi on Feb 22, 2010 3:46 PMyes the enhancement for this transaction code is RHIV0001 & the user exits are as follows :
1. EXIT_SAPLRHIN_001 Customer exit: Check number ranges for integration.
2. EXIT_SAPLRHIV_001 Customer exit: Internal number assignment
3. EXIT_SAPLRHIV_002 Customer exit: Check external numbers
4. EXIT_SAPLRHIV_003 Customer exit: Check whether internal number assignment
which one to use from the above four & in what order -
Hi, forum!
You guys have been really helpful.
I have learned how to bookmark an external pdf and have it open in my current pdf.
What I need now is to bookmark an external pdf but only view a specific range of pages in the external document, not just to open the external pdf.
Any help would be appreciated!Bummer...oh, well...
Thanks for the answer; I really do appreciate your help (and this forum, in general).
Thanks, George! -
Can't connect to specific number through CUCM
There is one number that our customer's site cannot connect to through CUCM, which is very strange. What could possibly be causing this?
Janna,
Many things, you need to give us some more details, i..e system you are using CUCM, CME, etc, call flow details, if external call what type of circuit is used i.e. PRI, SIP trunk, POTS, etc and appropriate debugs for the circuit. If you can answer these we can hopefully steer you further.
HTH,
Chris -
Specific Number range from a set of available number ranges - logic
Hi,
I have a range with me in one work area like 60000130 to 60000140.
In one more internal table I have data like 90000130 to 90000134
60000130 to 90000400
80000130 to 80000134
20000130 to 20000134
10000130 to 10000134
Any better logic to search whether the given work area is there in the internal table or not.
Thanksbetter than what?
what is the requirement? is case 'OK' when one value is in both, or do you need a total overlap?
we need more info and a more spezialized question.
Maybe you are looking for
-
Version of PeopleToolsTables stored in DB Depends on Peopletools Ver or els
Hi All, I am is in a very strange problem!!!! I have installed DB oracle 11g, weblogic 9.2, tuxedo 9.1, peopletools 8.49, HRMS&CS 9.0 Revision 1 Demo on my Laptop(all server on single Machine). When i see my peopletools version with AD and Data Mover
-
Hello, I have an oracle rac with 3 nodes and I have oracle database control enterprise manager (No Grid Control). Yesterday one node was reboot and I don't know why. I want set a rules from enterprise manager or something similar for notificate to me
-
SQLException Scrollable Resultsets
Using JDeveloper 3.1, Weblogic 5.1, Oracle 8i Successfully connecting to db and extracting data with vanilla prepared statements and resultsets. Not using Oracle proprietary classes. Using oracle's classes12.zip and the ide classpath shows my classpa
-
Need to replace failing hard drive but I don't have RnR discs
The hard drive has started to fail on my brand new T500 with WIn7 Pro pre-installed. I have not had time to create RnR discs. Lenovo support says they are ready to ship a new hard drive but there is a problem getting the RnR discs put together with t
-
Iphone 5 forget wifi, iphone 5 forget wifi//iphone 5 no recuerda wifi
My iphone 5 forget the wifi, i have to select manually and write the password each time. Furthermore, the iphone disconet alone the conection of the wifi. Mi iphone 5 no recuerda las redes wifi a las que se conecta y tengo que seleccionarlas manualme