Can we maintain two values for one material a plant without split valuation

Hello Guru's,
We have a situation, we use MOVING AVERAGE PRICE in accounting view 1. Without split valuation.
The actual issue is, we receive, damaged material from a customer with a "0" value, and we send the material as it is, to a vendor with a "0" value.
The vendor, sends us back the repaired material with a value, say "10" (and this keeps changing).
Is it possible, to have Non Valuated Stock and Valuated Stock within the same Plant, for Material "A".
And it shouldn't affect the MAP. Also, we don't want to have Split Valuation.
Please help.
Kashi

if i am getting your scenrio correctly then i will suggets u to maintian the material master with moving avreage price control indicator then
case1> gr from customer at o rs
use the tcode mb1c and movement type 511
as it is evaluated at MAP hence only material document genrated no accounting document
well tried to realize your scenerio but it is not possible to do that
as MAP is going to get effected as a result of valuated good recipet
u need to go for separate material code then transfer good from non valuated to valuated one using tcode mb1b and movement type 309 or use split valuation

Similar Messages

Two Valuation Class for one material type which is split valuated

hi , I have a material number which is split valuated like Capital & Revenue. There are seperate inventory GL accounts for both Capital & Revenue. So whenever material is procured based on the nature either Capital or Revenue , Corresponding Inventory GL account gets debited. How t

It is very much possible. Material type is linked with Valution class by account category reference and has many to many relationships. Valution type is linked with account category reference.
1 You create the material at valuation category level in MM01
2 Extend the material for Val type 1 with Val cls 1 in accounting view
3 Extend the material for val type 2 with val cls 2 in accounting view
for example
If you have valution type IN & EX linked with ROH material type via account category reference then you have the option to selecte valution classes 3000, 3001, 3002, 3003 in Std SAP. You have to make sure that Automatic account determination setting are correct for the valustion classes selected in OBYC.
Hope it helps
Karthi

Two prices for one material in sales order according condition type

Hi,
I configure the condition type according to following condition record:
Plant/ Sales Organization/ Distribution channel/ Material / Customer
(because system should calculate two prices for one material in two plants)
In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing procedure and to have a price for material, user should update the price in the price condition in sales order.
It is so difficult for user to update one by one, because there are several sales orders which need to update.
Is it any way to solve this problem?
Thanks,

> In the sales order screen, when user firstly select material , quantity, plant , system calculate the related price correctly but if user select the material and quantity and enter and after that select the plant, system will show the error message in pricing
Hi,
Why to let the user press Enter button before entering plant value Obviously, system will give error, because it doesnt get all the required value based on which you have maintained condition records.
Ask the user to enter all the value at item level otherwise you will have go for the option that you are doing currently.
It is said prevention is better than cure
Hope you get some inputs
regards,
Sagar

Maintaining two values for upper & lower specification for a MIC

Hi gurus,
My client requirement is that they want to maintain two values for upper specification and lower specification for a quantitative characteristic.
For eg. Master inspection characteristic is carbon %
& for this characteristic they want to maintain values as follows
lower specification:0.00 upper specification:0.32
lower specification:0.37 upper specification:0.60
The requirement is that both these limits should be maintained for the same MIC and system should not allow values between 0.32-0.37
Is this possible in standard scenario.If possible pls. provide me the solution.
Thanks in advance.

No, not possible in standard SAP. A test can only have one set of limts.
What you describe sounds more like specs anyway rather then test limits.
Your client isn't maintaining specs for materials in MIC's are they? This would be the least desirable method and not really the way SAP designed it to be.
Craig

Can we create two Filters for one cube

Hi all,
I created two filters for one cube (in 11v), I assigned this filters to one user in shared services , so which filter work,
I think ,We have to assign only one filter for one user , please i need clarification....
Thanks
Edited by: user98631 on 12 mars 2010 05:13

You can create many filters for one cube. I usually associate one group per filter and a user can have one or more groups assigned to them. Can't remember what happens when a user has access to conflicting filters (i.e. the order of preference). It is in the DBAG I am sure though.

Can you have two iPods for one computer?

I know nothing about iPods so please excuse me for this question that probably has an obvious answer. My sister has an iPod nano that she has been using with our computer for a long time. I just bought an iPod and was trying to set it up. So can I use her i tunes to put music on my ipod or how does it work? I am aware you are not supposed to steal music though. So what am I supposed to do?

Yes, you can use 2 iPod with 1 computer quite easily.
Using two iPods with One Computer
JC

Can I have TWO Extractors for ONE InfoObject ???

Hi all,
We have two extractors (Business Content & Generic Extractor for 0WBS_ELEMT_ATTR). Can we have these TWO extractors for 0WBS_ELEMT InfoObject. If yes, can I have the procedure, PLEASE ?
Thanks.

Hi Venkat,
You can try to use Flexible update. For this you will need to make your InfoObject an InfoProvider. See here for an example:
http://help.sap.com/saphelp_nw04/helpdata/en/87/3fdf9587f211d5b2ff0050da4c74dc/content.htm
Hope this helps...

Characteristic values for the material and plant combination...

Hi Friends,
I would like to know how can we maintain the characteristic values for the combination of Material and Plant though the material is not batch managed?
Thanks in advance,
Ram

Hi Rajendra,
Thanks for quick reply. I am maintaining under classification view but it does not ask plant any where. So the value will be same across all the plants but i want to maintain characteristic values separately under each plant for same material.
Regards,
Ram

Can I have two accounts for one IPod touch?

I have two homes, two computers (one in each home), and one IPod touch. I already have an account set up on one computer in the one home. I have a second home that I'm at about one week per month. I just want to be able to buy itunes at the second home and download them also to my one IPod. In other words I want to be able to get ITunes from two computers to the just one IPod. Is that possible? My son doesn't think I so.

If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. In this mode you can drag and drop whatever you want to the iPod from either library. You can also authorise each computer to use songs purchased from the same iTunes Store account:
Using iPod with Multiple computers
Managing content manually on iPod
Syncing Music to iPod
About iTunes Music Store Authorisation and Deauthorisation

Return two values for one site in single query

Oracle 10g on Solaris 10
data:
value integer
date timestamp
This query works as is:
WITH vals AS
     (SELECT start_date_time,
          value
     FROM     r_base a,
          hdb_site_datatype b,
          hdb_site c,
          hdb_datatype d
     WHERE     a.site_datatype_id = b.site_datatype_id
     AND     a.interval = 'day'
     AND     b.site_id = c.site_id
     AND     c.site_common_name = 'CABALLO'
     AND     b.datatype_id = d.datatype_id
     AND     d.datatype_common_name = 'pool elevation'
     AND     a.start_date_time > a.start_date_time - 367)
     SELECT x.start_date_time,
          x.VALUE,
          y.start_date_time,
          y.VALUE AS valuem1w,
          z.start_date_time,
          z.VALUE AS valuem1dm1y
     FROM     vals x,
          vals y,
          vals z
     WHERE     y.start_date_time(+) = x.start_date_time - 7
     AND     z.start_date_time(+) = ADD_MONTHS (x.start_date_time-1,-12)
     AND     x.start_date_time = TO_DATE('07-JAN-2008','DD-MON-YYYY');
and this query works:
WITH vals AS
     (SELECT start_date_time,
          value
     FROM     r_base a,
          hdb_site_datatype b,
          hdb_site c,
          hdb_datatype d
     WHERE     a.site_datatype_id = b.site_datatype_id
     AND     a.interval = 'day'
     AND     b.site_id = c.site_id
     AND     c.site_common_name = 'CABALLO'
     AND     b.datatype_id = d.datatype_id
     AND     d.datatype_common_name = 'storage'
     AND     a.start_date_time > a.start_date_time - 367)
     SELECT x.start_date_time,
          x.VALUE,
          y.start_date_time,
          y.VALUE AS valuem1w,
          z.start_date_time,
          z.VALUE AS valuem1dm1y
     FROM     vals x,
          vals y,
          vals z
     WHERE     y.start_date_time(+) = x.start_date_time - 7
     AND     z.start_date_time(+) = ADD_MONTHS (x.start_date_time-1,-12)
     AND     x.start_date_time = TO_DATE('07-JAN-2008','DD-MON-YYYY');
I need it to return storage and pool elevation in a single query instead of two queries.
The results should be:
current day, elevation_value; current day minus 1 week, elevation_value; current day minus 1 day minus 1 year, elevation_value; current day, storage_value; current day minus 1 week, storage_value; current day minus 1 day minus 1 year, storage_value
Thanks
Very, very much appreciate if you can show me how to do this..

something like this, perhaps? (untested, as I don't have your data):
WITH date_param as (select TO_DATE('07-JAN-2008','DD-MON-YYYY') p_date from dual),
SELECT max(nvl(case when d.datatype_common_name = 'pool elevation'
                         and a.start_date_time = p_date then value
               end)) elevation_curr_day_val,
       max(nvl(case when d.datatype_common_name = 'pool elevation'
                         and a.start_date_time = p_date-7 then value
               end)) elevation_last_week_val,
       max(nvl(case when d.datatype_common_name = 'pool elevation'
                         and a.start_date_time = add_months(p_date-1, -12) then value
               end)) elevation_last_year_val,
       max(nvl(case when d.datatype_common_name = 'storage'
                         and a.start_date_time = p_date then value
               end)) storage_curr_day_val,
       max(nvl(case when d.datatype_common_name = 'storage'
                         and a.start_date_time = p_date-7 then value
               end)) storage_last_week_val,
       max(nvl(case when d.datatype_common_name = 'storage'
                         and a.start_date_time = add_months(p_date-1, -12) then value
               end)) storage_last_year_val
FROM r_base a,
      hdb_site_datatype b,
      hdb_site c,
      hdb_datatype d
WHERE a.site_datatype_id = b.site_datatype_id
AND a.interval = 'day'
AND b.site_id = c.site_id
AND c.site_common_name = 'CABALLO'
AND b.datatype_id = d.datatype_id
AND d.datatype_common_name in ('pool elevation', 'storage')
AND a.start_date_time in (p_date, p_date-7, add_months(p_date-1, -12));

Two address for one company code

Hi SAPians,
I have a doubt in maintaining company address for Invoice output!
Is it possible to maintain two Address for one company code?
Like if XYZ company code and say it has has two customers AB and CD.
Then if i want to maintain Company address on print layout for invoice Different to each. how can i achieve it.
If yes, please through light on it.
Regards,
Romesh

Hi ,
As far i know it is not possible to have two different address for the same company code.As table can hold only single unique data.
As far as the above answer is concerned, we use International version fo Customers not for Company Codes.
Hope it helps.
Thanks and Regards
Rohit.

Maintain diffrent prices for same material

How to maintain different prices for same material (assume that the price of the the material is varying frequently that to with high margin)
But my req is need to maintain N values for same material .Is it possible??
For ex,
3 Jul Purchasing 20 Pc with 20 INR
5 Jul Purchasing 10 Pc with 10 InR
7 jul Purchasing 20 pc with 2 Inr .... like that price is changing freq. But i dont want to use MAP .Whatever price i purchased will be used for cost calculation.Any suggestion??
Message was edited by:
velmurugan s

Hi,
If your Purchase price changes frequently and you want your MAP or STD price to match the purchase price then you will have to write a simple ABAP that will read the last price paid for each item and automatically post an MR21 to change the MAP or STD price to that price.
I have seen this used in other implementations and it is the only real way to get the MAP or STD price to relate to the last price paid.
I would question why you need to do this though as the two "prices" are designed to be different and there is no accounting reason why they should always be hkept in line.
Steve B

Multiple values for one variable?

I've created my first set of variables (using Form Properties>Variables), tweeked some XML sourcecode and they're working .
What I'm now trying to figure out is how to have one variable that has 2 values that pop up in 2 different text fields.
Simple form at this point:
Item, Model and Service Tag.
The user selects the item from the drop down list and the Service Tag field is autopopulated from the variables I set.
How do I get the Model to appear based on the Item selection?
I tried putting the two values for one variable together but both values appear in the same field.
Variable info that works: Scan (variable) = MC3090BT (value)
I also need this particular variable to = Handheld scanner (try to ignore the redundancy).
I attempted to make MC3090BT as it's own variable with Handheld scanner as it's value, and add to the code below but it didn't work.
Here's some of the code if it helps:
<event activity="change" name="event__change">
               <script contentType="application/x-javascript">if(xfa.event.newText == "Handheld scanner"){
    servicetag.rawValue = scan.value;
}else if(xfa.event.newText == "Latitude X1"){
    servicetag.rawValue = X1.value;

Hi, I am trying to do the same thing..passing multiple values to receiving query variable through RRI. Right now if I assign a query variable of type multiple single values it does not take any value. It works only if I assign variable of type Single Value.
In my assignment details the sender query has Generic for type and * for selection type.
If any one knows how to pass multiple values to receiving RRI query, please give the details.
Thanks

Two sids for One instance

Hi All,
I have to create two sids for one database. I am using Oracle 9i on Windows machine as well as linux machine. Is there any possible to assign two sid's for one database.
Give me the suggestions...
Cheers,
Moorthy.GS

I think you need to define your term 'database' here
In Oracle world, database is usually referred to as instance.
a SID is one database instance, that's why, people will tell you that you can't have two SID for one database (instance)
However, if your 'database' means the schema and data, then yes, you can run two instances (with two SID of course) to host the same schema and data.

Two profit centers in same plant for one material

Dear All
We have this request from a customer.
There is a material in 1 plant but need to track that same materials in 2 different cost elements depending on where these are used (e.g. for sales will be booked to profit center 1 and demo will be booked to profit center 2)
Now we can partially achieve this by splitting them into 2 storage locations however this will only give a report on quantity and not separate valuation since 1 material can only have 1 profit center per plant. So we can know there are for example 4 sales item in sales storage location and 2 item in demo storage location but we will not know their price valuation as it will show 1 combined value for all 6, and we cannot assume valuation per item to be total divided by 6 because the value for the sales item and demo item need to be different.
Is there a way to achieve this?
We could copy the material to another material with different material number but this is not ideal since it will create problems at the backend when updating material data and also causes duplication which we want to avoid.
Any suggestions on how this can be achieved -- e.g. I am sure most companies have demo units which are separate from delivery units how is this scenario managed in those companies?
Regards
Anant

Hi
Use split valuation. Using Split valuation one material can have multiple valuation prices. In your case you can create two Valuation types (Demo and Sale item) for valuation category say XYZ. Then you can manage different price for Demo and Sale item even if the material is same.
Read below example: If you have same material grade A and grade B. Grade A is $100/Kg and Grade B is $80/Kg. This kind of scenario is possible by using Split Valuation.
Regards,
J.Sankar

Can we maintain two values for one material a plant without split valuation

Similar Messages

Maybe you are looking for