Can we maintatin one acess sequence

Hi gurus
can we maintain one acess sequcne for the 7 condition tables.  Please clarify this. 
2) can we maintain one access sequnce with 4 conditon types
please clarify this.  points will be rewarded

Hi Rack 29,
I did not understand what will be the Business Scenarion that demands 7 Condition Tables in an Access Sequence. But as you asked
1.) Can we maintain one acess sequcne for the 7 condition tables.
Yes, We can maintain 7 Condition Tables for one Access Sequence.
2.) Can we maintain one access sequence with 4 conditon types.
Yes, We can maintain same Access Sequence to 4 Condition Types.
Can you Please tell me to Configure which type Business Scenario you wanted to maintain so many Condition Tables.
Reward if helpful
Regards
PAVAN.

Similar Messages

  • Free Goods determination -acess sequence sales org/ plant/material

    Hi
    I am trying to determine the free goods by choosing the key combination as Sales org/plant/material.
    The system is not determineing the free qty ,instead when i maintain the condition record with customer/Material key combination ,then the system is determineing the free qty.
    I also tried to put acess Sequence Sales org/plant/material above the Acess sequence customer/Material,but still the system not detrmineing the free qty in the order.
    can any one pl gide me how to solve this issue.
    regards
    shashi

    Hi
    Go to the access sequence where Sales org/Plant/Material are maintained as condition table.
    Now select the condition table and then click the node "Fields" on the left hand side of the screen.
    It may give a warning message that "Fields are not yet generated". Just ignore this and Enter once again.
    Do this until it takes you to a screen where you can see fields like KOMK-VKORG, KOMK-WERKS and KOMP-MATNR
    Now create the condition records and check in transaction by creating sales order. It shoudl work.
    Hope this helps.
    You can reward if it helps you

  • I can no longer encode a sequence in PP CC after the Dec 2013 update

    II have had to shut down and restart PP CC about 5 times when just creating a very simple sequence of clips from a family get together for Thanskgiving.  I had to shut down since everything just quite responding.  Fortunately, when I reopened the project, I could resume.   I finally got my sequence created, but, now I can't export the sequence.  The encode has failed 8 times in a row.  I've tried direct export, and exporting to the AME queue.  Sometimes I get the error sound and the absolutely useless error message "Error compiling movie.  Unknown Error." Other times it just stops making any progress in the encode with no message at all, but there are zero CPU cycles being consumed by PP or AME.  It just plain stops, wiht no eror message.  That happened 3 times when used the Media Queue approach, and in the preview window in AME, it just stopped encoding at very different places in the sequence.
    It appears as though I can no longer encode a movie.  And I'm paying big bucks for this every month?  What a sap.
    I'm glad I'm not a Pro, whose income and life depends on these tools!  But, I have a full time job, and only a very small amount of free time.  I do not want to spend my small amount of free time as an Adobe Beta Tester.  I've been using Adobe tools for years, which is why I signed up for CC, but...at this point: I can't even encode a simple sequence!
    I can't express my disappointment.  I wanted to be loading the encoded MP4 onto VIMEO for my friends and family to see by now, but.....I can't even encode a very simple sequence.  And, I not a newbie.  I have hundreds of videos on VIMEO, and many more on Youtube and Smugmug.  Every one was produced with Adobe PP (from v4 on).
    But now:  I'm dead in the water.
    I gurantee you that i will not 're-up' when my CC subscription expires, and, I guess right now, I have to start from scratch with my raw clips and find some other tools to use?  I wish all my expensive plug-ins (like MB Suite) would work in whatever the tools I will move to...but...I guess I'll just have to write them off as a loss, just like the next 8 months of paying for my Adobe CC Software that no longer works.
    I wish there was a way I could take the Thanksgiving Project and its sequences I've created in PP CC and convert the Project to PP 6.0, since I never had  any issues with it PP v6.0.
    But, from what I understand, if you make a project in PP CC, you are lost.  You can't go backwards.
    And, you know what?  I'm done.  I quit.  I won't even try starting over in PP 6.0.  I'm going to find some other tools.  I know they won;t be as full-featured as Adobe's, but...I'm not a pro.  I just need something that works reliably.
    Disgusted beyond words.
    John
    Win 7 Pro
    24 GB Ram
    NVidia GTX 470
    PS:  So, does Adobe have any kind of disaster recovery plan when an update like this fails?  Can you please send out a "new update" that rolls me back to the prior version on PP CC?

    OK.  I have successfully encoded this very simple sequence, but, I *can't* get it to encode using my "standard" custom H.264 preset that I have been using for years.
    But, I was not able to encode in many plain vanilla codecs either, but, I got a notice that there was a CC update for AE, so I took the time to install those updates, and, as I always do, I re-booted after the update of AE.
    But, of course I had re-booted a couple times last night when I couldn't get the sequence to encode.  That's somethinf I always try b4 writing to a form.
    So, here's the sequecne of events this morning:
    1)  Try to encode sequecne to uncompressed AVI (Cineform AVI 1920x1080).  It SUCCEEDED.  But, even though the AVI was large > 3.6 GB the quality was horrible, I did not pay much attention to the quality settings.
    2)  Try to encode to Quicktime H.264 codec.  FAILED.
    3)  Try to encode to Quicktime Codec=Uncompressed 4:2:2.  FAILED
    4)  CC UPdate notice for AE CC and AE 6.0
    5)  Perform update
    6)  Reboot
    7)  Try to encode to Quicktime Codec=Uncompressed 4:2:2.  SUCCEEDED - but ENORMOUS FILE SIZE *very nice quality though*  :-)
    8)  Try to encode to Quicktime Codec=H.264.  SUCCEEDED.
    9)  Try to encode to my 'usual' H.264 Preset FAILED, just hung up during the 2nd of two passes.  My preset is a VBR with 2 passes, see bitmap below. In this particular case it got 'hung' at this frame.  But, It never 'hangs' in the same place?
    So, I don't know why I was able to encode the sequence using the Quicktime Wrapper and botn Uncompressed and H2.264 Codecs after updating AE CC and rebooting, but not before.  Surely there is no interaction between AE and AME?
    But, the re-boot should not have caused it alone, since I had rebooted several times last night, and I've installed nothing but the new update for AE since last night?
    So, I guess I'm OK now.  Please excuse my tone last night, I was very frustrtated.
    It is interesting that I still can't encode this particluar sequence using my "standard" H.264 preset.
    And, BTW Jim:  What I mentioned in my previus post was not that I had brought and old PP 6.0 sequecne into CC and encoded it successfully, but that I just re-encoded one of my most complex sequences AGAIN in PP 6.0, just to wanted to make sure nothing was haywire with "good old" PP 6.0.
    But, I did just re-encode a sequence from PP CC from before the Dec 13 update using my "standard" H.264 preset, and...yes...it DID encode.
    SOOOOO...Jim, you were correct.  My inability to encode was not due to the DEC 13 PP CC update, but something very peculiar about this one sequence.  But, it is a very simple sequence.  The only effects applied is some light color grading using MB Colorista, and Warp Stabilizer to a stabilize a few hand held shots.  No other effects.  And...the encode that fails using my standard preset, never fails at the same frame.
    But...at this point I'm OK.  Instead of an encoded file in MP4 I have an ecnoded H.264 rendition in the QuickTime MOV wrapper.  At least I've got that sequence done and can move on to the ton of others I need to get to (without having to learn an entirely new tool).  :-)
    John

  • How can I stop an action sequence with another

    Hi,
    I am quite new to flash catalyst. I made a side with an office where you can click the phone to go to the status "phone". In there you should be able to call some virtuell people. I made buttons with names that trigger different action sequences with showing the name of the called person in the display and playing a sound file that sounds like a call. Now my problem is when I am clicking a different name while it is still in one action sequence, the other one shows up over the first and both sounds are playing at the same time.
    How is it possible to tell the action sequence to stop all others when it is started?
    Thank you for your help.

    Sorry, I'm a bit confused now. Just to clear this out:
    WDDOBEFOREACTION is for validating user inputs BEFORE Actions and HERE you can prevent actions from happening
    WDDOAFTERACTION is called JUST WHEN an action is happening for all visible Views (it's to prevent redundant code which would be equal for all event handlers)
    WDDOBEFORENAVIGATION is AFTER Actions and BEFORE navigation.
    Check the chart in the following Link (sorry it's german, english version seems not available, but the chart is in english nevertheless)
    http://help.sap.com/saphelp_nw73/helpdata/de/49/b8c706c7c26d7ce10000000a421937/content.htm
    In my opinion put an if clause into WDDOBEFOREACTION, check whether the respective field is filled; and in case it is filled, execute your method; if not, don't.
    That's why I am confused, you kind of answer your question within your question itself )) or I still don't understand what you want to accomplish.
    best regards, hope this helps you (if not, try to explain it even more detailed for me ;-D)
    Lukas

  • HT1719 Can more than one device access the same ITunes library?

    Can more than one device acess the same ITunes library?  And if so, does each device's list of songs remain separate and distinct for each device?

    No problems whatsoever. I have 3 iPhones and 3 iPod touches with different IOS connected.

  • Can I produce a new sequence in Premiere Elements 7

    I bought Premiere Elements 7 with 15 class licences for my students.
    I really admire the Elements 7 and very happy to be able to present this affordable and yet so efficient program to my students.
    There's only one thing I really miss: how can I produce a second timeline? (sequence)
    I normaly have my raw material in one timeline (sequence), there I sight it and chose pieces I need for my film, I cut them out, copy and paste in another timeline (sequence), which I sometimes rename to: master
    I hope I just can't find it.
    Please help me to find it.
    Thank you

    Welcome to the forum.
    Unfortunately, PrE, unlike PrPro, does not have Sequences. As I normally use PrPro, I feel that this is a big loss, but considering the differences in the two programs, I can see why Adobe chose to not include Sequences.
    Now, there are at least two ways to do similar:
    1.) Edit your Project, exactly as you want, and then Export/Share that Project as a DV-AVI Type II file. Import that AV file into a new Project.*
    2.) Many have used ClipMate, a Clipboard "extender," to Copy/Paste between two Projects. I have not used it, so I do not know the power, or the limitations.
    Good luck,
    Hunt
    * One workflow is to do a very tight edit, with all cuts and Transitions, as changing things like a simple Transition can be a bit more work, and require extra Trimming, just to swap out a Cross-Dissolve for another Transition. The other is to do a very loose edit, leaving the Clips with plenty of additional footage, so you will have the necessary Handles. For this, I would go so far as to place 02 sec. of Black Video between each Clip, so I could easily find where I will want to Trim later. It's either a tight, final edit, or a very loose one.

  • How can we make one object as synchronizable?

    Hi!
    I am new to java.How can we make one object as synchronizable?
    Thanx

    Synchronize is used to make an object and/or a functional sequence thread safe. By itself it does not make something thread safe.
    So the point is to make something thread safe not just to synchronize it.
    You can either sychronize a method like so....
          public synchronized void doit()
    Or you synchronize on an object (where 'Object' below is solely as an example, any object can be used)...
          Object lockObject = new Object();
          public void doit()
             sychronized (lockObject)

  • Is there dvd software out there that allows you to create a dvd menu in which the viewer can choose to play different sequences of the videos offered?

    Is there dvd software out there that allows you to create a dvd menu in which the viewer can choose to play different sequences of the videos offered? It was described to me as a dvd matrix menu but I can't find anything like it for mac. The idea is that there are multiple videos on the dvd menu and you can choose to play "video A, then B, then C" or "video B, then C, then A", etc, in different orders each time. And it would play the sequence that you choose.

    meghanica wrote:
    I think that's on the right track but I'm wanting something that allows the viewer to choose the sequence when they're looking at the DVD menu. I only see how the creator of the DVD can make different sequences. It's a yoga tutorial DVD and we are wanting the viewer to be able to pick a sequence from the menu items as such: pick one of the 3 warm-up videos, then pick one of the 2 yoga practices and then pick 1 of the 3 cool-down videos and then the dvd will play the sequence of selected warm up, practice, then cool down. And it can be differently chosen every time the viewer uses the menu.
    You can do this on a DVD with DVD Studio Pro.
    DVD's have some very basic storage called SPRM/GPRM scripting IIRC.
    There are a few tutorials around for DVDSP…
    http://www.kenstone.net/fcp_homepage/dvd_language_nattress.html
    http://www.digitalproducer.com/article/DVD-Studio-Pro-Scripting-Part-4-28784
    You use scripts to set values that are stored in a tiny amount of memory on the player & then have to use additional scripts to respond to the values set, so that at the end of a sequence it will jump to the one a user previously chosen.
    Some things to consider…
    DVD's have limits on the number of chapters & titles, you need to plan around that.
    Some DVD players are terrible to navigate, the settings that a user selects will be forgotten when the player is powered off. Users will need to make the choices over & over, every time they use the DVD (computers may remember it - I haven't tested this in years).
    You will also need to setup many variations of menus to be able to indicate what selections they chose.
    It is not a trivial task, you may want to hire a programmer to set it all up.
    Testing is also a lot of work - too many combinations can quickly cause issues for testing, different players can also do odd things too.
    I have used scripting for basic, 'play all' or 'play chapter' menus where the video is encoded once on the DVD & the scripts will either play through, or simply play a chapter & return to the same menu.
    You may find that it would be better to invest in setting up a website with this. On a custom site it would be possible for users to save a playlist or several, they can also share playlists etc, it would be more flexible & usable IMO.
    See roaring apps for info on others who have used DVD Studio Pro with various OS's…
    http://roaringapps.com/app/dvd-studio-pro …it looks like 10.8 may be the last OS to work correctly with DVDSP.
    Other DVD authoring apps may be able to do GPRM scripting too, but you will have to search for them.
    I think the registers are part of the DVD spec, so devices should support them, https://en.wikipedia.org/wiki/DVD-Video

  • Condition records and Acess Sequence

    Hi,
           Can u give me a detailed explaination on Condition records and Acess sequence..I tried searching froum,. did not get any satisfactory result.. Please help
    Thanks In Advance
    Sanu Pillai

    Hi sanu Pillai,
    Access sequence is search strategy which
    searches valid condition records from condition table for
    condition types.
                 If we want to make the condition type
    independent then we assign access sequence to it so that it
    will fetch the value from condition tables .
                 But we dont assign access sequence to
    dependent condition types because they take value from the
    independent codtion type on which it is dependent .
                For example PBOO is a independent condition
    type so it will fetch value from the condition table
    related to info record.Then other dependent condition 
    types related to surcharge , discount will take the value
    from PBOO.
    Condition record
    A condition record to be the 'right' record, the information in the order, customer master or material master must match the key of the record.  If not then the system will go on to check the next table.
    Worked Examples using data from the example tables above
    Customer    Customer Group (from the customer master)    Region    Material    Price
    1234    A    NSW    X    11
    1224    A    WA    X    10
    2346    C    QLD    X    15
    1224    A    WA    Y    200
    A similar lookup is then done for each condition type. E.g.: the discount condition could specify various percentage discounts.
    For more information check below links
    http://help.sap.com/saphelp_47x200/helpdata/en/08/2bcd37b5264a54e10000009b38f842/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/9c/a6c2086b4b11d395b200a0c929f4c9/frameset.htm
    Thanks,
    Swamy H P

  • Acess sequence in taxinn

    Hi,
    can u pls explain, what's usage and beneifit of acess sequence in tax proceedure . ie JTAX & MWST, JST1..

    Hi Mahesh,
    The Access Sequence consists of Various Key Combinations (Condition Tables) such as
    Vendor/Plant?Material 
    Country/Plant/Control Code/Material etc..
    The Exclusive indicator in the access sequence helps the system to stop searching once a valid condition record for a conditon type is found (i.e if a record a maintained is maintained for your first key combination system wont check for the remaining accesses as you have set the exclusive indicator for the first access.)
    Hope its clear.
    Revert if you need further clarifications.
    Regards,

  • Can I use one account for both my labtop and my ho...

    can I use one account for both my labtop and my home computer?
    Solved!
    Go to Solution.

    Softthunder wrote:
    can I use one account for both my labtop and my home computer?
    Hello,
    Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • How can i use one SQL statement to solve problem?

    How can i use one SQL statement to solve the question below?
    For a Table named A, there is a column named F(char type).
    Now select all the records where F like '%00' and update their F value to '%01'
    Just one SQL statement.Do not use PL/SQL block.
    How to do that?
    Thanks.

    What is the data volume for this table?
    Do you expect lots of rows to have '%00' as their value?
    Following two statements come to mind. Other experts would be able to provide better alternatives:
    If you have index on SUBSTR(f, 2):
    UPDATE A
    SET    f = SUBSTR(f,
                      1,
                      length(f) - 2) || '01'
    WHERE  substr(f,
                  -2) = '00';If most of the rows have pattern '%00':
    UPDATE A
    SET    f = SUBSTR(f,
                      1,
                      length(f) - 2) ||
               DECODE(SUBSTR(f,
                             -2),
                      '00',
                      '01',
                      SUBSTR(f,
                             -2));

  • How can i use one iCloud Photostream on 2 devices?

    Due to a bug (or feature) on iOS 8 i can't use the same icloud id on 2 iphones:
    https://discussions.apple.com/thread/6536998
    So how can i use ONE iCloud Photostream then on 2 devices?
    Also, on OSX i can define only one Photostream.
    So, how do you import pictures from 2 streams into iPhoto?
    Familyshare is not usefull as the pictures are not in Original-Filesize!

    Hi ..
    Yes. " iPhone 6 or 6 Plus.  iPad Air 2  or  iPad mini 3"
    Set up and use Apple Pay

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • HT2589 We have purchase 5 apple minis and would like them all on one account.  That way we can monitor the use of these units.  they will be used strickly for a business application.  can I use one account in itunes or must i have multiple.

    We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units.  They will be used strickly for a business application.  Can I use one account in itunes or must i have multiple.

    Not going to happen the way you want it to.
    When you add a gift card balance to the Apple ID, it's available for the Apple ID.
    Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Maybe you are looking for