Can we make Nexus7009 as NTP server

Hi
Can we make Nexus7009 as an NTP server. Basically we are craeting one MGMT vlan with HSRP configured between two chassis. HSRP IP want to use as an NTP server IP .
is it possible and if yes , what will be the configuration for NTP?

Hello
I have neve done this on an nexus however you can try the following:
Are you going to be pointing the 7k to an external authoritative time server and having you lan clients point to the 7K? - meaning do you still want this 7k be authoritative ntp for others even if itself ntp isnt sychronised to an external time source?
access-list 10 permit 192.168.10.0 0.0.0.255 ( internal lan ntp clients)
access-list 10 permit host 172.16.10.1 ( external time source)
ntp ccess-group peer accesslist 10
ntp server 172.16.10.1
tp source-interfface x.x.x.x ( managment interface)
Lan client ( 192.168.10.100)
ntp server(7k) prefer
res
Paul

Similar Messages

Please help troubleshoot why SM-SRE WAAS module can't time sync with NTP server

I have a remote WAAS site where a SM-SRE-900 module is plugged in a 2945 router. Everything is fine except the module can't sync its time to the NTP server. Its NTP was configured right and it can reach the NTP server with no problem. There's no authentication configured. But somehow it can't associate with the NTP server. I have tried manual NTP sync, but it failed too.
The same NTP server and config is also used for many other WAAS site and the CM. They are all fine. I'm running WAAS 4.2.3 build 7. The module isn't showing any other alarms.
Here is some show outputs and the manual NTP sync result. I noticed its poll is only 64 seconds while all other sites are showing 1024 seconds.
waas1#sh ntp status
ntp enabled
ntp authentication disabled
server list:
Server           Key
10.0.0.1         -
     remote           refid      st t when poll reach   delay   offset jitter
==============================================================================
10.0.0.1        66.96.98.9       3 u   43   64 377   16.828 2359370 2421.24
waas1#ntp 10.0.0.1
16 Dec 22:06:20 ntpdate[9835]: bind() fails: Permission denied
Failed to set software clock using NTP server 10.0.0.1

What the SRE-900 have as it's time? Use the show clock command. Does it match within a few minutes of ntp already, if not, and if this is not the first first clock set out of the box, then ntp sync might fail.
You might try to manually set the clock correctly (set clock ... something), then see if the ntp server will sync.

How can I make Firefox trust a Server Certificate by Default?

I'm trying to distribute Firefox via Empirum. All settings are made using the CCK-Wizard Addon.
When I import our Certificates in CCK-Wizard, I can make trust-settings for CA's, but not for Server Certificates, and so the SC isn't trusted by default.
Is there any way to make the trust Settings for SC's in the install package, maybe through an option in about:config (didn't find any, but maybe somebody knows more than google :P )?
I tried to do it like PRF_1 suggested here https://support.mozilla.org/de/questions/687296#answer-112220 but in the last step I got an Error 1: C compiler cannot create executables.
Regards,
Bowser

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How can I make my Minecraft Bukkit server faster?

I host my own minecraft bukkit server.
Ip: ccmc.us.to
And I was wondering, since I host it on my iMac, I would like to know if anyone knows how to make it faster. Why I want to make it faster: More Players, Hold more plugins, Prevent lag, prevent lag on other players, improve connection, etc.
My system specs:
Model Name:          iMac
Model Identifier:          iMac12,1
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          32 GB
Boot ROM Version:          IM121.0047.B1F
SMC Version (system):          1.71f22
Serial Number (system):          C02HGGT7DHJF
Hardware UUID:          5F444975-87A3-51B3-82C4-9E4E88E606BF

Hi Russo, not much you can do on an iMac... maybe a SSD or faster Internet, but..
What do you get for raw speeds here, for both Java & Flash, DSL Reports...
http://www.dslreports.com/stest

How can i make my pc a server ? Help me.

I m student.I m using apache server for my project.
for accessing webpages,i m using in my PC http://localhost:8080/index.html.
Now, i want to access my project(or webpages) from any machine(PC) using my
IP address(http://myIPaddress:8080/index.html) as i m using LAN and there are 30 computers more in our lab.My IP address is a private IP.
So,plz give me the solution n oblige me.

You can get the software like tomcat from http://tomcat.apahce.com
then deployment on your pc
Put your project in webapps ,and startup your tomcat container
Anyone can view your web vid your pc's IP in local network
The detail information you can get from Internet
Try....

How to make upgrade from application server and not from central instance?

Hello SAP Gurus!
I have SAP ECC release 6.0, and I´m gonna make upgrade to enhancement package 6.06, do you know if Can I make upgrade from application server, but not from central instance?
Thanks.

Hi Victor,
Upgrade process has to execute from the server where message server is running.
So I guess it is not possible to initiate the SAP upgrade from application server.
Regards,
Deepak Kori

How can I make a server differ between two or more clients?

How can I make a server differ between two or more clients?
The clients can connect and talk to the server fine, but how can I make the server talk to one, two or all clients? i.e. what would be a good way to implement this?
Currently, the server listens for connections like this:
while (listening) {
try {
new ServerThread(this, serverSocket.accept()).start();
I guess one way would be to add the ServerThreads to a Hashtable with the client ID as key, and then get the ServerThread with the proper client ID, but this seems unnecessary complicated. Any ideas?

Complicated was perhaps the wrong word, I should have
written something like it doesn't "feel" right. Or is
this a common and good way to solve communication
between a server and multiple clients?Thats pretty much how I do it. I normally use an array or ArrayList of Sockets instead of HashTable, with [0] being the first player etc.... Then you can communicate with exactly who you want. If you want to send bytes to all of them, just send the same thing to each socket individually (or is there a better way to do this?).

How can I make my imap email not take the emails off the server?

How can I make my imap email not take the emails off the server when I delete them on my iPad?
Can anyone help me whith this?
I tried to use the pop account in gmail settings but that was downloading all my emails sice 2008 ( more than 300 deleted emails tha can only be found in the deleted email box), when I just have 5 or 6 email in the inbox .
How can I solve this????
Thank u all...

I have the same problem. For years I have been able to delete emails from my ipad and have them remain on the server so I can deal with them on the desktop. Now they get deleted from the server when deleted from the ipad, which makes the ipad unless for reading mail.
You answered to delete the email account on the ipad and set up a new one as a pop. I have made many attempts to do that in the incomping mail server "Host Name" field but it always errors out even when the host name is equal to what my desk top has. So I can see no way to change away from IMAP. I started with an ipad 1 and now have an ipad 2.
Rachael

How can I make server use single class loader for several applications

I have several web/ejb applications. These applications use some common libraries and should share instances of classes from those libraries.
But applications are being deployed independently thus packaging all them to EAR is not acceptable.
I suppose the problem is that each application uses separate class loader.
How can I make AS use single class loader for a set of applications?
Different applications depend on different libraries so I need a way that will not share library for all applications on the domain but only for some exact applications.
When I placed common jar to *%domain%/lib* - all works. But that jar is shared between all applications on the domain.
When I tried to place common jar to *%domain%/lib/applibs* and specified --libraries* attribute on deploying I got exception
java.lang.ClassCastException: a.FirstDao cannot be cast to a.FirstDaoHere http://download.oracle.com/docs/cd/E19879-01/820-4336/6nfqd2b1t/index.html I read:
If multiple applications or modules refer to the same libraries, classes in those libraries are automatically shared.
This can reduce the memory footprint and allow sharing of static information.Does it mean that classes should be able to be casted ?

You didn't specify which version of the application server you are using, but the config is similar as long as you know what to look for. Basically, you need to change the classloader delegation. Here's how it is done in 8.2
http://download.oracle.com/docs/cd/E19830-01/819-4721/beagb/index.html

Can I make another website using iWeb,then publish it to a different server through the SMTP panel on iWeb

Can I make another website using iWeb, and then publish it to a different server through the SMTP panel on iWeb, even though I have a website published on mobile me, can I just use the SMTP engine to publish a different site but to a different server, that's the question I'm asking. I'm hoping for a quick reply. Thank you for your time in reading this.

Yes. You can do it one of two ways:
1 - select FTP Server in the Publish To menu (click on the site folder to get to the options) and enter the FTP address, username and password and publish as you would if using MMe.
2 - select Publish to Folder and publish. Use a 3rd party FTP client like Cyberduck to upload the site files to there server using the FTP address, etc.
OT

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview.

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End Class

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End Class

[SOLVED] Can't make Akonadi server / Nepomuk service run

I'm currently running KDE SC 4.9 on Arch Linux x86_64, system fully up to date.
My laptop's HD went dead some days ago so I had to restore my system from a 2-weeks old backup; I usually use fsarchiver to backup root partition and 7z to compress ~/.kde4 and ~/.config so this way I'm covered up about these kind of things.
So after restoring my system and home folder I did a full upgrade (nearly a gigabyte of downloads) and while most things seems to work well I found that Nepomuk isn't running, when I try to start it manually I have this error message:
"Failed to start the desktop search service (Nepomuk). The settings have been saved and will be used the next time the server is started."
Going back to the wiki I did my homework re-configuring Akonadi but so far I can't make Nepomuk run.
This is what I have:
~/.config/akonadi/akonadiserverrc
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=localhost
ServerPath=/usr/bin/mysqld
StartServer=true
User=akonadiuser
Password=akonadiuser
Options="UNIX_SOCKET=/home/msx/.local/share/akonadi/socket-heybeavis/mysql.socket"
[Debug]
Tracer=null
The database is already created and configured:
mysql> show databases;
+--------------------+
| Database |
+--------------------+
| information_schema |
| akonadi
| mysql
| owncloud
| performance_schema |
+--------------------+
5 rows in set (0.00 sec)
and the ~/.config/akonadi/mysql-local.conf is in place:
~ $ cat ~/.config/akonadi/mysql-local.conf
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
# Based on advice by Kris Köhntopp <[email protected]>
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
#sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
[client]
default-character-set=utf8
Now, when I do restart Akonadi server I got:
~ $ akonadictl restart
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/usr/local/bin", "/usr/bin", "/bin", "/usr/local/sbin", "/usr/sbin", "/sbin", "/usr/bin/vendor_perl", "/usr/bin/core_perl", "/usr/bin/msx", "/usr/lib/colorgcc/bin", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin")
~ $ akonadi.collectionattributetable OK
akonadi.collectionmimetyperelation OK
akonadi.collectionpimitemrelation OK
akonadi.collectiontable OK
akonadi.flagtable OK
akonadi.mimetypetable OK
akonadi.parttable OK
akonadi.pimitemflagrelation OK
akonadi.pimitemtable OK
akonadi.resourcetable OK
akonadi.schemaversiontable OK
Nepomuk Query Server not available
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/usr/local/bin", "/usr/bin", "/bin", "/usr/local/sbin", "/usr/sbin", "/sbin", "/usr/bin/vendor_perl", "/usr/bin/core_perl", "/usr/bin/msx", "/usr/lib/colorgcc/bin")
KGlobal::locale::Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
KGlobal::locale::Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
"/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
"/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
"/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
"/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
search paths: ("/home/msx/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/home/msx/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/msx/.kde4/lib/kde4/", "/usr/lib/kde4/")
AkonadiAgentServer(13913)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
AkonadiAgentServer(13913)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
Please correct me if I'm wrong but seems Akonadi can't/don't create the resource needed by Nepomuk, right?
"/usr/bin/akonadi_nepomuk_feeder(13892)" Soprano: "Could not connect to server at /tmp/ksocket-msx/nepomuk-socket (No such file or directory)"
Already raked the forums and the net but can't find anything of help :(
* UPDATE *
1.Further research shows akonadi database is empty so it seems Akonadi isn't connecting to MySQLd.
2. I created a new user to simplify research and found the very same problem when trying to activate Nepomuk: Failed to start the desktop search service (Nepomuk). The settings have been saved and will be used the next time the server is started.
From what I remember Akonadi/Nepomuk/Soprano were working well in previous KDE 4.8.4.
* UPDATE *
Solved after reinstalling all MySQL stack.
Regards,
Martin
Last edited by msx (2012-08-15 06:33:30)

msx, please use [ code ]...[ /code ] tags (without the intervening spaces) around your listings. See: https://bbs.archlinux.org/help.php#bbcode

Windows Server 2012 Foundation, in a Workgroup - "The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller"...

Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.

Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here?

How can I make MFE delete the mails from the serve...

guys,I am using mfe on my E63 with mail2web free account.I configured gmail to retrieve my hotmail mails then I configured gmail to forward my mails to my mail2web account.I did that so I dont have to have more than one mailbox on my phone and to be able to check my all accounts from one account which is mail2web via mfe.but my problim is when I delete an email via mfe from my phone its not been deleted from mail2web servers.I mean when I login on pc I see all the mails that I have been deleted.can I make the phone to also delete the mails from the server? thanx
my blog on the net(in arabic):http://bazkurd.wordpress.com

WaMuHIP07 wrote:
Right-click the videos that you want to always start from the beginning in iTunes. The options tab of the video file properties contains this option control. Uncheck the box that says "Remember Play Postion."
Or hit the left side of your scroll wheel when launching it on your iPod

How can i make iphone mobile website, database in Sql Server 2005 ?

how can i make iphone mobile website, database in Sql Server 2005 ?
Thanks & Regards
Jamshed Ali
Email id: [email protected]

You need to be a little clearer in what you're asking.
You can't make any web site in SQL Server - it's a database engine, not a website tool.
What you can do is create web sites that pull data from a back-end SQL Server, but the SQL server doesn't handle the client connection at all (that's handled by a web server such as Apache, IIS, or similar).
There are many ways to build such a site including .NET, PHP, Perl and more (although I don't know all the options for Windows servers because they're not as common outside of corporate/enterprise networks).
In either case, given your choice of development language (HTML, plus one of the PHP/Perl/.NET/etc. options), plus your database (SQL Server) plus your web server (IIS, Apache, etc.) you can make any web site you like (or, at least, you're capable of developing).
If you want to opimize that web site for iPhones then there are many references on how mobile browsing differs from the desktop. I'd recommend this book as a reference (and, yes, I understand the irony of linking to a paperback book for web design guidance ). Googling mobile web design (or iPhone web design) might yield more results.

Can we make Nexus7009 as NTP server

Similar Messages

Maybe you are looking for