Can we make streaming on a network ?

Hallo,
I want to install three cameras to allow people to look on dogs and their babies, feeding,...
It is not motion detection but life video.
How will be the future ?
What will happen when 100 people will connect to the wvc54gca ? what is the monthly bandwidth request ?
shouldn't my provider close my account ?
Are there cheap hosting for webcam ? Please share your own experience
Best regards
Marc

Yes, this could be done, however I am not sure if it will work for 100 people at the same time or not...
Your Providor should not close your account but you will face certain issues with bandwidth...
Also they will be able to see entire camera's setuo configuration so you will have to ensure that they don't change any of the camera settings...If they change the camera settings then there would be no way to track who changed it...

Similar Messages

  • How can I make OSX index a network share for spotlight?

    How can I make OSX index a network share for spotlight?
    I am using a QNAP NAS with SMB network shares, which I mount with OS X Mavericks. They are not searchable, as far as I know because of the indexing of network share is by default not activated.
    To force the OS to index them I activated this via mdutils. But this is no solutions. This makes spotlight to index the share once. But I want spotlight to index it always and keep it up to date. I have a huge amount of documents & fotographs, which is very difficult to manage without being searchable.
    Unfortunately the only solution I found in the www was the mdutils-way, which seems not to work, maybe only works not for me.
    I would appreciate any assistance,
    Thank you,
    Stefan

    My thanks to everyone who has contributed to solving this problem here.
    It appears that there still is NOT a good, reliable solution.  Please correct me if I'm wrong.
    I did find this on http://jonathansblog.co.uk/how-to-enable-spotlight-indexing-on-a-network-drive:
    ===================================
    To enable spotlight indexing on a network drive:
    # mdutil /Volumes/name -i on
    To disable the indexing of a connected network drive:
    # mdutil /Volumes/name -i off
    To check the status of indexing on a connected network drive:
    # mdutil /Volumes/name -s
    ===================================
    And, I found this on the Synology NAS forums:
    cd /Volumes
    mdutil shareName -i on
    mdimport -Vp ./shareName
    where shareName = name of your share
    I have used the mdutil /Volumes/name -i on, and it seems to work.
    But, if I understand it correctly, it is a one-time indexing -- the index is NOT keep up-to-date with changes.
    So, how can we keep the index up-to-date?
    My thought was to schedule a Terminal file to execute each night with the mdutil code.
    Would this work?  If so, how would you setup a scheduled run?
    Would it have to be done on each Mac that accesses the Share?

  • Hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad

    hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad

    Hi James and welcome.....
    Try the help here for Windows 7.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Carolyn

  • Can't Make Airport Connection to Network

    Just set up new wireless network with new cable modem (Motorola) and wireless router (Netgear) booth provided by cable company. Have gotten iMac and iPhone to connect to the network without a hitch but cannot get the G4 with internal airport card to get with the program. Was previously operating the G4 with another wireless network at another location.
    I have tried to duplicate the current settings of the iMac on the G4 and still the G4 is not recognizing the network. Using WPA2 Personal Security. Have deleted all other network locations and tried to eliminate everything else that might be confusing the G4 with the previous setup (with the exception of the old network password which I can do if necessary). Have tried network diagnostics, etc., but no luck.
    Can connect to the internet via ethernet no problem, but would like to get rid of the 25 foot wire running through the living room.
    Don't know what other information you might be needed to help me trouble shoot this, but will stay active here at the forum and respond quickly if someone wants to help me with this.
    Thx!

    Just research the Netgear details and it seems there is an option to choose to override the default MAC address by either choosing "use this MAC" or "Use Computer MAC".
    I read in another forum question something similar to this was the problem. When I hardwire the G4 to the Netgear, it recognizes the G4 MAC address but there is no IP address listed whereas the iMac has both listed........
    There is also an advanced wireless settings window where I can choose to list the PC's, but then it states:
    The Wireless Card Access Setup page displays a list of wireless PCs that will be allowed to connect to the router based on their MAC addresses. These wireless PCs must also have the correct SSID and WEP settings configured on the Wireless Settings page to access the wireless network.
    Because it mentions WEP settings do you think this advanced setting is for pc's that can't utilize WPA or do you think this might be a viable workaround?

  • Can't make a connection with Network Solutions

    I successfully published my site today to the GoDaddy server - no problems, the iWeb Site Publishing Settings Page worked great.
    I have another site on Network solutions. I put in all the correct information in iWeb's FTP Server Settings block on the Site Publishing page. Hit "Test Connection" and it failed. Over and over and over. So get this - I call Tech Support at NetSol. They are on the line with me for half an hour and we tried everything and could not make a connection. We both gave up.
    Is anyone having problems getting a connection with NetSol?
    I just tested the Apple Publishing page with GoDaddy again and it still works just fine there.

    This Apple doc may help:
    _iWeb '09: Publishing to Windows based FTP server_
    Also, a forum reader wrote:
    I just changed my "website URL" field to read nothing more than "http://". Problem solved.
    ...Quoted from this old thread:

  • Every Time that I try ot download my songs that I have purchased from Itunes and error message come up, "error 450." Make sure that your network connection is open and try again. What can I do to fix this problem?

    Every time that I try to download my music from I tunes an error message comes up it says, ( err = 450) Make sure that your network connetion is active and try again.  What can I do to fix this problem, I have tried everthing that I-tunes has told me but with no luck. Thanks

    Try disabling your parental controls. Does that help with the 450?
    iTunes: Using Parental Controls

  • I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network.

    I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network. I have to reselect it everytime I come to work.

    Settings/General/Reset - Reset network settings will "forget" all WiFi networks so you can select them again.
    If the problem with your company network is not solved by doing this, are there multiple sites that have the same network name for the company network? Or is it the default network name for the router type (e.g., DLINK, LINKSYS, etc)? If so, this is what is causing the problem and there is no solution other than convincing IT that it is a bad idea to have duplicate network names.

  • I can't make or receive calls in my iPhone 5(just bought second hand and unlocked), but I am able to use 3G network. If I use the same SIM card in other phone it works fine. I have tried network resetting and restore.

    I can't make or receive calls in my iPhone 5(just bought second hand and unlocked), but I am able to use 3G network. If I use the same SIM card in other phone it works fine. I have tried network resetting and restore.
    I bought this cheap from an unknown persons. I have checked it is not in blacklist. And unlocked by apple.

    Those are all carrier features, so contact your cell phone provider.

  • Can not make network user accounts

    After upgrading from 10.6.8 Server to 10.8 and installing server tools, I can not make network user accounts.  All of my old network user accounts migrated to the new OS and work properly, I just can not seem to make new accounts under 10.8.
    Under 10.6.8 I would log into Workgroup Manager as diradmin and I could pretty easily make new users.
    Under 10.8.2 I launch the server app and click on "users".  The addition (+) symbol in greed out for making new users.  I can make local users via System Preferences, but I can not see any way to change local users to network users via either System Preferences or the Server app.
    I have logged into the server app using a local administrator account, the diradmin account, and the root account.  None of the accounts allow access to create new network users (addition symbol is greed out).
    Is there a trick to making network users in 10.8 that I am missing?
    (as an aside, I have noticed I can log into Directory Utility as diradmin and can view the node with all my network accounts.  It seems like I might be able to manually create a user account this way, but I'm not quite sure how to make the user record)

    Open Directory service is started and functional for all the pre-existing network user accounts that were made under 10.6.8 and earlier.  I just can not seem to create new netowork user accounts.
    I followed the steps on this page and managed to make a user record that appeared as a network user in the Server app, but I still can not seem to log in under the user I made in this fashion (dscl command via terminal).
    http://www.deadmarshes.com/Blog/20111105010130.html

  • Can not make or receive calls on edge E cellular network

    can not make or receive calls on edge E cellular network Using my iphone 6 plus. Please advise.

    @Loomy77
    Try the solutions below to see if you can move forward:
    settings>cellular>turn cellular data off>wait 10 seconds>then turn it back on and test
    if that fail
    settings>general>reset>reset network settings

  • Can't make or recieve calls (report a network conn...

    Hi All,
    I purchased the N9 64Gb some months ago - and updated it with the latest 1.3 release.
    After some usage - I started to notice that sometimes (once a day or once every second day) - the N9 ends up in some sort of mobile network deadlock.
    Error description: When in deadlock - when trying to make calls - phone reports network error. When trying to browse the internet - no connection. If i call to my N9 - from another phone, the call do not go through.
    Extra info: The N9 displays one bar of network connection, the icon for 3G is sometimes on.
    If im connected to WLAN - I can browse the internet, else not.
    If I reboot the N9, it will operate as normal again.
    There is no warning or indication shown before it goes into the deadlock - of not being connected to the mobile network.
    Idea's from an old member of the Low Level Yoda team in Copenhagen: The config flag that invoke a cell reconnect routine -  after the phone have been in a network situation of no 3G or 2G basestation connect options, could have been "forgotten" to be raised in one of the the states of the "going out of coverage of a basestation" routine.
    I hope that there is a solution - since the error leaves the end user (me) in an unfortunate situation of beliving to be online while its not the case. Its not acceptable at my workplace - that im often (randomly) not reachable by mobile phone.
    Best Regards
    Lars Nielsen 

    A) Which network operator do you use, in which country?
    B) Did you try the GSM-only mode?
    C) Did you try a new SIM?

  • Can You make a wireless network.....?

    Can You make a wireless network with just a router and the Airport extreme?

    You can make a wireless network with just the AirPort Extreme or any other wireless router.

  • I can't make a call? The usual response I get i get is to check phone settings?. I tried to reset the network already still the same

    I can't make a call? The usual response I get i get is to check phone settings. I tried to reset the network already still the same problem. What is the possible problem? I can send message and receive calls

    Hey Rache0105,
    Some of the steps you've already done, but I would run through the iPhone Troubleshooting Assistant for call issues. You can find it here:
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Welcome to Apple Support Communities!
    Have a good one,
    Delgadoh

  • How can I make my computer only recognize my network and not that of one of my neighbors?

    How can I make my computer only recognize my network and not that of one of my neighbors? This is for when I am at home, and everytime the computer goes to sleep it essentially loses the connection, only to pick up my neighbors network when it is awaken.
    I am on Comcast (Xfinity) Highspeed Cable wireless modem/router
    Thanks in advance!
    Mark

    You can make your network the preferred network.
     > System Preferences... > Network > Advanced... > Drag your preferred network name to the top of the list.

  • I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  No firewall involved.

    I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD.  Are there any apple protocols or other settings that need to be enabled on WCS?  There is no firewall inbetween the two connections, as this is all on our internal network. 
    Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
    Thanks.

    If anyone ever comes across this and has the same issue, here's what I did to fix it:
    My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only".  (I would've used N but one of the NICs in my house is too old to support it.)  Anyway, after making this change, Facetime works fine on the phone.  Hope this helps someone else!

Maybe you are looking for