Can We Make the SL Wiki Environment More Collaborative?

We were very excited to hear that the SL Wiki/blog system was going to allow more collaboration via Iphone/Ipod Touch. We are very disappointed with the result. I am hoping someone can shed some light on how to make this solution more workable with the Apple portable devices.
Our expectations for a truly portable collaborative environment include:
1. The ability to post and update content--not just comments
2. The ability to actually watch wiki/blog .mov or .mp4 videos on the portable device. For example the videos found @ http://web2.wisd.us/groups/kwestv17/blog/
3. The ability to dynamically subscribe to content without syncing with a computer.
Is this completely unrealistic for this system? Are any of these possible with the SL Wiki/blog and an Ipod Touch? I know I can get the first item if I switch to Wordpress and install the app on each device. Item 2 just seems like it could be a format problem. I'd greatly appreciate suggestions for getting that to work. Item 3 is not as important as the other 2 but if someone knows of an app that will do it I'd be grateful.
Thanks in advance for your great ideas!

Item # 2 has been isolated (but not solved) to an issue with Iphone 3g. It has the same video playback capabilities as the 3G S but the videos I linked to in previous post play on the 3g s and ipod touch but not on the 3g phone.

Similar Messages

How can I make the Lion iCal display more readable?

How can I make the Lion iCal display more readable?

I'm wondering the same thing.
Under Lion, my calendars' color coding is next to useless because they're suddenly so muted.
Previously I could easily pick out which events belonged to which calendar without effort. Now, all the colors are so light as to be nearly indisinguishable; I must toggle calendars off and on to highlight a calendar's events.

How can I make the drawings stand out more?

Hi everyone,
I have a design I like but I don't know how to make the drawings stand out more in the boxes?
I feel they are a little bit lost in the squares. This design is the home page of foils
every bit of advice would be very appreciated. Thanks a lot

Hi SRiegel,thank you for your answer. I just put the screenshot here.
But the website is more complete to see the overall atmosphere.

Can we make the amp sim sound more "tubular"?

I play live instruments exclusively, and a rack-mounted mini + a MOTU 828 has replaced all the stage amps, pedals, preamps, etc. It's fantastic.
The one thing I'm not happy with is the guitar amp simulator's inability to re-create the valve amp (a.k.a. "Marshall Stack") sound.
The "American High Gain" sounds, to my ear, like a classic 1980s solid-state amp.
The "British High Gain" sounds to me like a classic 1970s... solid-state amp.
I don't want the flat-line "crunch" of solid state, I want the SCREAM of over-driven tubes!
In every other way, the signal processing capability of GarageBand is a dream. I like the stereo chorus effects, the reverb, the compressor, the gate, the EQ... It's just this one small thing I'm lacking that is the thorn in my side.
I can't afford a vintage Marshall Stack. I can probably afford a pretty good knock-off tube amp and a couple 4x12 cabinets, but I don't want to haul all that around to support one instrument.
Heck, I don't even want to mess with a RP200 or Guitar Pod. I shouldn't have to! If a $120 stomp-box can re-create an enjoyable illusion of tube distortion, the magnificent Mac mini should have no problem doing so as well.
Anybody have any luck getting a top-notch tube amp sound out of GarageBand? If so, would you care to share your settings? If not, are there good third-party patches and/or "Jam Pack" offerings which can get me there?

Golias wrote:
For cheapskates like me, are there any really great free (or reasonably cheap) amp-modeling plug-ins that anybody can recommend? I've experimented with a few now, and most of them don't sound that much better than the ones that come with GB.
Count me as a cheapskate guitarist as well! OK, while I'm not necessarily adverse to shelling out for the likes of AU versions of Amplitude, Guitar Rig, or the Line6 stuff, I'm definitely adverse to shelling out for it without being able to road-test it rather better the last demo versions of any AUs for these I've seen allow. It's a fair pile of money to drop on something that I'm not sure I love, might not be able to sell on easily, and could be "obsoleted" by an OS upgrade ....
So far, I've stuck with the stock GB amp sims, doing my best to tweak settings to my tastes. Even with my limited experimentation -- and abilities -- I think that the (relatively limted range of) amp simulation built in the GarageBand at least may be much more capable than it appears. I think the shipped presets are spread too generically thin to be very interesting of themselves. Clearly, Apple assumes that more serious guitarists will go off and purchase specialized AUs, and hasn't spent a lot of time getting serious gearheads in there to come up with more and better presets (or basic amp models). There is also a dearth of documentary info about how the models were designed to behave and how to get more out of them.
But what about all us cheapskate guitarists? Or at least those of us unwilling to part with so much cash for a 3rd-party digital amp model on what is, basically, a dare?
I really, really, really wish Apple -- or someone -- would set up a web site that facilitated a GB user community where people could upload and download user-made presets. (This would be useful not just for guitarists, but other presets as well.) Apple has always had a strong user community, and it seems to me like a forum like that would be a relatively cheap way of enhancing user experience and building user loyalty. The installed user base for GB must be enormous, so why this hasn't been done is beyond me.
Anyway, my stuck the info related to my (so far) most successful (in my mind ;)) GB amp sim tweak to my own web site: <http://www.carlaz.com/music/gb_presets.html>
Dubbed "El Sabado" it was aimed at a relatively modern Tony Iommi-ish tone -- which I won't claim it achieves but when I've posted some of my short demo clips to guitar-oriented forums, some listeners have been impressed that such a tone came out of the built-in GB amp simulators. (With some neck humbucker examples, some listeners also compared it to a Slash-like tone.) I'm sure other more knowledgeable than myself could improve on this or better it; and I tweaked it up in GB 2.x. I've only just been playing with GB '08 in recent weeks, so I haven't made any definite changes using the additional controls available in GB '08. The .pst file is downloadable, and there's a screenshot of the (GB 2.x) settings in case you can't use the .pst.
Obviously, the sound coming out of amp sims will depend on your indivdual guitar. The above one was designed around a LP-style twin-humbucker guitar. I've been working on a couple of bass amp sim tweaks, though my bass is an old Rick 4001, which starts off sounding a bit different from more common and more modern basses, so anything I can eventually post in the bass amp sim dept. might be a bit weird when used with, say, a Fender Jazz or Precision type bass ....

Can I labled the same song to more than one albums? As you know, some songs are repeated in different albums.

Can I labled the same song to more than one albums? As you know, some songs are repeated in different albums.

You can make a copy of an existing song, then change the album, artwork and track number details. You cannot make the same physical file show up in two different albums.
tt2

How can I make the spry accordion remember the panel open when I refresh the page or jump to a new page?

How can I make the spry accordion remember the panel open
when I refresh the page or jump to a new page?
I am using the accordion feature on all my pages as a
navigation aid. It has three panels. When you refresh the page the
panel goes back to the default pane... Is there a way of
controlling this so that the browser can remember the pane that is
open (say set a variable, cookie, other?)

Look for "Set the default open panel" on the following page:
http://labs.adobe.com/technologies/spry/articles/accordion_overview/index.html
Keep in mind you would need to change that bit of code on
every page. The only way to do it more dynamically would be to
include a custom javascript or PHP/ASP style script in order to
change the value.

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

How can i make the text bigger?

How can i make the text bigger?

1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you.

How can I make the edges of the JSC component curved?

It is a very common practice to make the edges curved in web development. Curved edge looks attractive and professional. (for example see blog.com)
How can I make the edges of the JSC component curved? For example, consider Textfield component, how to make the the sharp edges smooth and curved?
Thank you very much.

Follow the steps below implement rounded edges for tabs in a tabset component:
1)Create 2 images: level1_selected.jp and level1_deselct.jpg to be used as the background for these tabs. Thse images can be easily craeted using windows paint software. Just ceate a rectangular image of size 200X30 and draw a rounded rectangle on it.
2) Redefine the following styles in your application stylesheet(originally defined in css_master.css)
.Tab1Div td.Tab1TblSelTd {
     background-color:#EDF5F8;width: 200px;height:40px;background-image:url(images/level1_selected.jpg)
.Tab1Div td.Tab1TblSelTd {
     background-repeat:repeat-x;background-position:left bottom;border-bottom:none
.Tab1Div td {
     background-color:#EFEBEF;width: 200px;height:40px;background-image:url(images/level1_deselect.jpg);border:none
.Tab1Div td {
     background-repeat:repeat-x;background-position:bottom left
a.Tab1Lnk:link, a.Tab1Lnk:visited {
     display:block;padding:8px 15px 0px;font-weight:bold;text-align:center
Results: By doing this you'll have the selected and unselected tabs show up with rounded egdes and also the selected tab will look bigger than the unselected tas making it more prominent.

How Can I make the following query faster

Hi Guru
I want your valuable suggestion to make the following query faster.I did not write all required columns list. I gave here all those columns where I have conditon like decode,case when,or subquery
(SELECT CASE WHEN REPORTED_BY IS NULL THEN
          (SELECT INITCAP(EMP_NAME) FROM HR_EMP WHERE EMP_NO = M.EMP_NO_RADIO)
     ELSE (SELECT INITCAP(EMP_NAME) FROM HR_EMP WHERE EMP_NO = M.REPORTED_BY) END RADIOLOGIST_NAME,
     (SELECT TEAM_NAME FROM DC_TECHTEAMMST WHERE TEAM_NO = M.GROUP_NO) GROUP_NAME,
     CASE WHEN M.RESULT_ENTRY_LOCK_BY IS NOT NULL THEN 'R'
WHEN M.REPORT_DONE = 'D' THEN 'D'
WHEN M.REPORT_DONE = 'P' THEN 'P'
WHEN M.REPORT_DONE = 'F' THEN 'F'
     WHEN NVL(M.IMG_CAPTURED,'X') NOT IN ('B','Y') OR M.QA_RESULT = 'F' THEN 'S'
WHEN NVL(M.IMG_CAPTURED,'X') IN ('B','Y') AND NVL(M.QA_RESULT,'X') NOT IN ('B','P') THEN 'Q'
     wHEN NVL(M.IMG_CAPTURED,'X') IN ('B','Y') AND NVL(M.QA_RESULT,'X') IN ('B','P') THEN 'C'
END STATUS,
     (SELECT DECODE(NVL(V.DELIVERY_STATUS,'N'),'E',3,'U',2,1)
          FROM FN_VOUCHERCHD V WHERE V.VOUCHER_NO = M.VOUCHER_NO AND V.ITEM_NO = M.TEST_NO) DELIVERY_STATUS,
     trunc((start_time-order_end)*24,0)||' hr'||':'||
     decode(length(trunc(to_char(MOD((M.start_time-M.order_end)*24,1)*60),0)),2,to_char(trunc(to_char(MOD((M.start_time-M.order_end)*24,1)*60),0))
          ,1,to_char('0'||trunc(to_char(MOD((M.start_time-M.order_end)*24,1)*60),0)))||' mi' duration_order_capture,
     DECODE(R.CONFIDENTIAL_PATIENT,'Y','*',NVL(R.NAME,R.name_lang_name||' '||R.name_lang_fname)) PAT_NAME,
     FNC_PATIENTAGE(R.REG_NO,'',R.CONFIDENTIAL_PATIENT) pat_age,
     DECODE(R.CONFIDENTIAL_PATIENT,'Y','*',R.PATIENT_SEX) PAT_SEX
FROM DC_MODALITYAPPOINTMENT M,DC_TESTMST T,OP_REGISTRATION R
WHERE M.ACCESSION_NO IS NOT NULL AND NVL(M.CANCEL_FLAG,'N') = 'N'
AND (NVL(T.SP_GEN,'S') = 'S' OR NVL(M.DOC_REQ_GEN,'N') = 'Y')
AND M.TEST_NO IS NOT NULL AND M.TEST_NO = T.TEST_NO AND M.REG_NO = R.REG_NO)
How can I make the above query faster.
Query condition or indexing whatever is preferable please guide me.
The approximate data of tables
DC_MODALITYAPPOINTMENT 2,000,000
A lot of updating is going on some columns of this table.all columns are not in the select list, Insertion is happend in batch process by back-end trigger of another table.
Primary key based one column,
OP_REGISTRATION 500,000
Daily insertion on this table around 500 records,updation is not much.
Primary key based one column 'reg_no'
DC_TESTMST
Total records of this table not more than 1500.This is setup table. Insertion and updation is not much on this table also
I have to create a view based on this query .
and I have to create another view to serve another purpose.
In the 2nd view I need this query as well as I need another query by using union all operator based on a table(dc_oldresult)
which have 1,600,000 records.There is no DML on this table
SELECT      NVL((SELECT USER_DEFINE_TEST_NO FROM DC_TESTMST WHERE TEST_NO = SV_ID AND ROWNUM = 1 ),SV_ID) USER_D_EXAM_NO,
(SELECT TEST_TYPE FROM DC_TESTMST WHERE TEST_NO = SV_ID AND ROWNUM = 1 ) EXAM_TYPE,
     NVL((SELECT TEST_NAME FROM DC_TESTMST WHERE TEST_NO = SV_ID AND ROWNUM = 1),'Exam Code: '||sv_id) EXAM_NAME,
     (SELECT PAT_NAME FROM OP_REGISTRATION WHERE REG_NO = HN) PATIENT_NAME,
     (SELECT PAT_AGE FROM OP_REGISTRATION WHERE REG_NO = HN) PATIENT_AGE,
     (SELECT PAT_SEX FROM OP_REGISTRATION WHERE REG_NO = HN) PATIENT_GENDER
FROM DC_OLDRESULT
WHERE HN IS NOT NULL AND SV_ID IS NOT NULL AND UPPER(ACTIVE) = 'TRUE'
Should I make join DC_OLDRESULT, OP_REGISTRATION and DC_TESTMST? or The eixisting subquery is better?
I use OP_REGISTRATION and DC_TESTMST in both query
Thanks in advance
Mokarem

When your query takes too long ...

Can i make the setting and keyboard background black ? , because i have vision problem and the white color is too bright and cause pain and headache for me . thanks

can i make the setting and keyboard background black ? , because i have vision problem and the white color is too bright and cause pain and headache for me . thanks

Drmikekuna wrote:
... Sony AVCHD .. Canon SD ... Logitech .. Flip Mino HD. ..
.. Certainly not the best idea for a professional but just fine for a guy who likes to edit for fun.
that's were the fun stops on a MacOs-based system ..
FC/e supports only a few 'standards': DV (as from miniDV cams), HDV (from miniDV devices), AVCHD (from most devices) and with a little trick, described on my website AVCHD-light (720p, as from many compact-stills) ..
done.
some Flips are supported by iMovie, which you can abuse as a converter tool.
but 'non video standard' (=read 'video' as 'in TV') formats, resolutions and codecs ...
a) manual conversion = less convenient
b) loss of 'quality', e.g. when you blow-up tiny 480x320/15fps into video..
FC/e is FC/pros lil' brother.. meant for a more.. adult workflow..
if you like to wrestle with multi-formats, stay with Windows/Magix/..
Windows=options, with a chance of getting lost
MacOs=convenience, with a chance of getting restricted

How can I make the skin like rock ?

How can I make the skin of a dramatic BW image of a Boxer look like peeling lava skin ? I know that's a funny way to say it, but I want to make him look like rock and lava with hard cracks and such. Anyone have some ideas ?

I'm sorry Myron, I didn't mean to cause your thread to go in the wrong direction. I was feeling a bit frisky after a long day.
Making skin look like something else is not a task I do normally, but if I were to want to experiment I'd probably try things like pasting a section of rock over the top of the skin in question, then set the mixing mode to Luminosity (so that just the luminance of the rock surface is used with the color of the face. Use masking and partial mixing to help blend it.
Seek (or capture) rock imagery with the light coming from the same direction, and with a similar level of detail. That will help make it seem more believable.
There may be others (I hope) who will chime in with more specific instructions or other tricks o' the trade that they've found to work.
Best of luck, and please don't be afraid to show your results.
-Noel

How can I make the pdf file size smaller?

How can I make the pdf file size smaller?

Hi vickyb,
Reducing the file size of PDF requires Acrobat (one way is by choosing File > Save As > Reduced Size PDF). If you don't have Acrobat, you can try it free for 30 days. See www.adobe.com/products/acrobat.html for more information.
Best,
Sara

How can i make the order in PDF?

Dear experts,
Can any one help me with user exit or BADI to obtain the number spool the order (ME23N) when save the order. I need converted the order in PDF.
How can i make the order in PDF?.
Thanks in advence,
Regards,
Alejandro.

open the print program associated with output type and make changes to get pdf.
see these link for code
[smartform pdf|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/smartform%2boutput%2bto%2bpdf%2bformat]
[scriipt pdf|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/converting%2bscripts%2boutput%2binto%2bpdf%2bform]

Can We Make the SL Wiki Environment More Collaborative?

Similar Messages

Maybe you are looking for