Can we make the time card read only in OTL?

Hi All
can you please suggest a solution for this? Time entries are coming into time card from swipe machine.
We dont want the employees to modify these time entries on tima card. In other words we want the time card to be read only for the employees. Thye should only be able to view the time entries and submit the time card?
Thanks a lot in advacne
Kiran

Kiran,
There is a set of steps that you need to follow to enable any change to timecard layouts. Please follow the Tc whitepaper to make changes and upload using FNDLOAD command. You will also have to upload them with new layout names and update the same in preferences node.
--Shiv

Similar Messages

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

I would make the signature field read only until something is entered in the mandatory fields.

I would make the signature field read only until something is entered in the mandatory fields.

Mina,
You can use LiveCycle Designer's Action Builder to easily achieve this.
Please go through online documentation for the specific version of LiveCycle Designer that you are using.
It is intuitive and very easy to use Action Builder (You will find this option under Tools Menu item of Designer).
--Santosh

When putting an event on my iPhone calendar and the time, when it goes to iCloud to my laptop or iPad calendar the times are different. How can I make the time the same?

When putting an event and the time on my iPhone calendar, when it goes to iCloud to my laptop or iPad calendar the times are different. How can I make the time the same?

Welcome to the Apple Community.
Is the calendar you are adding events to on the phone an iCloud calendar.

How can I make a file not read only? Using LV6.0, I have tried the Access Rights VI w/o luck.

I am talking about any file in windows 98 that has the read only box checked when I look at the properties of the file from Windows Explorer. I can can get rid of the check from the properties box, but I want to do it programmaticaly in LabView.

Hi,
Wire in '448' to the 'New Permissions' of the Access Rights VI. This will set the file as readable, writable and executable. I just tried this (on WinNT, though).
The 'permissions' parameter is a 16-bit integer where the least 9 bits are used. Of these, for Windows, bits 8, 9, and 10 (0-indexed) are important (i.e. if these are set = integer 448). See online Help for full details.
Hope this helps,
Khalid

I created a Custom list New Form and need to make the text fields read only

When I use SharePoint Designer and add the read only attribute to the SharePoint form field, then it throws a web part error.
but here is the thing, I have current user Filters populating the Form Fields. So the form fields populate First name , last name etc. and I need these fields read-only....
the Client doesn t want the end user to Change those fields. Is there any way to "LOCK" the form fields?
As I have only 7 text fields that need to be locked down. and one field is a signature line that is a true input field.. where the user has to inter their initials.
Any ideas? as I have tried most of the items available thru searches nothing works, or it throws that web part error message.
Steve Athey

Daniel: ( I'm now at work, a different ID is logged on for me)
I used SharePoint Designer.
Steps:
created a web part page
then on the SharePoint Designer ribbon I then went to insert:
new item form
Then I selected my data source (list)
then I placed the 8 columns on the page
a page viewer web part to pull the manual that people have to read.
and 7 current user filter webparts. (1 for each form field) Yes it is over kill, but I'm trying to keep this straight out of box as much as possible...
then for the form fields
I added a parameter and the read only tag see below in bold:
<asp:TextBox runat="server" text="{$ParamEmployID}" id="ff17{$Pos}" __designer:bind="{ddwrt:DataBind('i',concat('ff17',$Pos),'Text','TextChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Employee_x0020_ID')}"
ReadOnly="True" />
I also added the parameters in the ribbon area
the error message doesn't tell me much, it just send me to web part maintenance page...
if I removed the ReadOnly = True then the error goes away..... So I was trying to find a quick simple JQuery and or javascript code item that would make the 7 text fields readonly and leave the
8th text field alone to allow people to place their initials on the page to say that they read the manual.
I have created hundreds of these types of pages .. this is the first time I have run into this issue, but it also the first time I have tried to use the ReadOnly = True item.
Any Ideas and or thought on how to make the items read only? and not throw the error.
Steve

How to make the fields dynamic read only in live cycle designer

hi folks
I have created a form in Adove livecycle es. Some fields should be read only from the start. So i have set the property .access 'open'. In versions of Adobe 8 this works, but in the latest version it won't so i think it should be done via another solution. Does anybody know how?
kind regards,
Anton Pierhagen

May be the below code may help.. It loops thru all the pages in the PDF form and make them protected. So the user can not change any value in the form.
for (var i = 0; i < xfa.host.numPages; i++)
var oFields = xfa.layout.pageContent(i, "field");
var nodesLength = oFields.length;
//set the access type to be protected for all fields
for (var j = 0; j < nodesLength; j++)
var oItem = oFields.item(j);
oItem.access = "protected";
Thanks
Srini

Make the Custom page read only depending

Hello all,
Is there anyway to make a custom page readyonly for some users? I know we can set rendered to false for each region but i'm wondering if we have a property for the whole page.
Thanks
KK

Hi KK,
Is it a 11i or R12
if it is R12 it is easy just passing the region where you want to make it read only or for the entire page, pass the top level region.
If it is 11i, you need to copy paste the sample code and call it from your Process request after you did the user check.
Btw, instead of user check, create a responsibility and assign that responsibility to those users and check for that responsibility to avoid any hard code in User list side.
Check this thread and if you are not able to make it, please update the issue you face.
How to make OA framework page Viewonly
Ready only Page
or
http://www.applikast.net/technical/oa-fwk/misc/making-an-oa-framework-page-readonly
Thanks,
With regards,
Kali.
OSSi.

How to make the OAF page Read-Only for one Responsibility?

I have a requirement to make the entire OAF page to Read-only for particular Responsibility.
Is there any direct option to make page Read-only ?
Can anyone suggest some solution?

Hi,
Check one article on
http://www.applikast.net/technical/oa-fwk/misc/making-an-oa-framework-page-readonly
or you can do Personalization for each item on page.
Thanks,
Abhi

How can I make the Time Capsule Icon stay on my desktop?

I just replaced my old Airport Extreme and aging external drive with a new Airport TC. The upgrade coulen't have been easier. Here's my question. I occasionally want to access the TC as in external drive so I would like the TC icon to appear on my desktop all the time rather than appearing only when the Time machine is running. Is there a way to do this? I'm running all the latest software / firmware. Thanks and I know there have been some similar threads but they were pretty old.

Open System Preferences (gear icon on the dock)
Open Users & Groups
Click the Login Items tab (next to the Password tab)
Click the + buttton at the bottom of the list
Use the Finder interface to locatet the Time Capsule drive and open it on the desktop
Click Add
Now the Time Capsule drive....named "Data", unless you have renamed it, will mounta and appear on the desktop when your Mac starts up.

How can I use the Time Capsule in only 802.11b/g?

I think I am getting interferences on my 5GHz phone from the time capsule, which I have running in 802.11n mode with b/g compatitibility. I assume if the Time Capsule was running in 802.11b/g mode I would not get the intereferences?
The Airport utility does not seem to have a setting to use the Time Capsule in 802.11b/g only. Is there a way to accomplish this?
Message was edited by: Karl R.

Duane wrote:
Then the Time Capsule's 5 GHz network should not interfere with the phone since it operates a long way from the phone's frequency.
Not necessarily. In the US 802.11n channels appear to go up to at least 5.805 GHz, if I interpret this chart
http://www.networkdictionary.com/Wireless/Wi-Fi-Wireless-LAN-Frequency.php
correctly.
It would seem that the best way to avoid interference with 5.8 GHz cordless phones is to avoid channels above 153.

Can you make the iTouch sync with only specified folder(s) on your PC?

I share a PC with my girlfriend and basically when I sync I only want to sync with my tunes, pictures etc and not her's as well.
Is there a way to do this?
Thanks in advance for any help you can offer me.
Darren

hold shift when you are loading itunes up, and you will be able to create a separate library.
when you load up itunes again, it will load up the last library opened, to get back to the other one you need to repeat this process and open the other one.

How Make the Report Fields Read only

Hi I have drop down selection in a Report field.After selecting a particular value and submiting it the field should become readonly.

Hi SanjayBala!
Create a conditional branch that will be executed if your select list submits (the branch must be conditional. The conditiontype is request = e1 and e1 is the name of your select list). This Branch ought to have a request (lets say select_list_ro). Create a read only condition for your select list (request = e1) that comes to use if the current request is select_list_ro.
Hope that helps!
yours sincerely
Edited by: Florian W. on 03.02.2009 14:04

If im travelling can i make the time stay on my home time zone?

wondering if my ipod touch will stay on its current time zone if i travel with it

You go to Settings>General>Time&Date and turn off Automatic. However, the times is then not that accurate and some apps like FaeTime and Messages may not work.

Can we make the time card read only in OTL?

Similar Messages

Maybe you are looking for