Can we manually give value to value fields in COPA?

Hi Friends,
Due to restrictions in COPA, we are not able to pass some values in to COPA value fields automatically, but this data is available in tables related to FI, can we pass this data in to COPA manually.
If possible can you tell me the procedure for doing that.
Valuble inputs will be rewarded and highly appreciated.
Thanks in advance.
Regards
Ravi

hi
yes, you can go to tCode KE21n and enter the manul postings..
hope this will helps u out...
assing the points if help full
Ranjit

Similar Messages

  • How to create Formula based value field in COPA

    Hi,
    I want to know how to create formula based  value field in COPA
    My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
    factor.
    anybody give some light on the same topic or requirement ?
    Thanks
    Nilesh R

    The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
    In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
    Now click the "check formuar"-button. Then save.
    Before you can use the key figure in assessment, execute TC KEUG.
    Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
    I hope this made it clearer.
    Regards
    Nikolas

  • Assign direct material cost to value field in copa while issue to Prod orde

    Dear All,
    My requirement is like this:
    There are some 16 material groups from A to P each containing some materials(finished goods).
    I want to allocate overhead to different material groups(Charecteristic in copa) in COPA using the periodic assesment cycles. I am able to allocate overhead(admin & sales cost) to different value fields in copa from different cost centers.
    I want to analyse the product cost and also the profitability of each material group in COPA using Report painter. Iam able to pull all the costs which i assign to value fields using assessment. But, i am NOT able to get the direct material cost which is issued to production orders using BOM.
    My question is whether we can assign the direct material cost to any user defined value field(material cost value field) while the material is being issued to production orders. Is there any automated way where we can directly assign the direct material cost to value field in copa while issuing the material to Production orders.
    Pls explain me whether we can do it. if yes how?
    Thank you very much in advance.
    Regards,
    Vishnu
    VST-IT.

    PA is a Profitability analysis tool. That means it gets updated when a sale is made, not before. (Except for settlements and assessment of overheads.)
    Goods issues for production gets updated in CO-PC, and needs to be analysed there. If you don't, you loose all the inbuilt tools for variance analysis, cost estimate comparisons, Wip Calculation etc. To the best of my knowledge, a Profitability Segment cannot be used as a cost object in Production Planning, because amongst others, you need to be able to capitalise the produced materials to stock at the end of the production run, or to WIP at the end of the Financial period,which is not possible with PS.
    Similarly, overheads are recorded in CCA and needs to be analysed there.
    If one goes against these big groupings in SAP, you always run into problems.

  • Origin Group as Value field in COPA - Is that Possible

    Hello Gurus,
    The business requirement is to see all the Origin Groups as Value fields in COPA - Is that Possible? If Yes, Please suggest me the steps to follow.
    Thanks a lot for your time.
    Regards,
    PM

    Hi Praveen
    Origin group cant be a Value Field.. It can be a Characteristic...
    Try with these 2 options
    1. KEA5 - Click on Create/Change a new Char and Try to create it with reference from table MBEW... If this is allowed, you will be able to plug in the Field Origin group in yur COPA data structure... regenerate your op concern after this
    2. If (1) is not allowed, then create a WW char and write a derivation rule in KEDR with ref to Table LOOKUP and use table MBEW
    Regards
    Ajay M

  • Only on value field in COPA gets values from SD

    Hi,
    I created two value fields for COPA. I assigned one of them to the condition VPRS (a cost) which works properly. The other condition, assigned, VKP0 doesnt appear in the COPA-document. We are using record type F.
    But when I ran an flow analysis I can see that the value from VKP0 has flown to COPA in record type A?
    I will assign point directly to a working solution.
    Best regards
    Carl-Johan

    HI,
    Billing document value flow is as per KE4I mapping to value fields.
    There are some value flow analysis tools under CO-PA to check your settings with respect to value flows. Use transaction KE4ST (Simulate billing document transfer -> Value flow (<Ctrl +F7>) to check where things went wrong.
    Hope this helps.

  • Recalculation of Value field in COPA

    Hi,
    We have a value field in COPA which derives its value from the UoM conversion maintained in Material Master,
    we have now realized that incorrect conversion factors were maintianed in some material master records due to which incorrect values are being displayed in COPA reports.
    We have corrected the Material Master records, but how can we update the existing COPA values ?
    Regards
    Sachin Bhutani

    Hi ,
    You cannot revalue value fields in COPA. You can however derive the characteristics derivation using Realignment functionality. In order to overcome your problem , you may have to resort to differential postings generation through KE21N.
    Enjoy
    Venkat.

  • Populate New Value field in COPA for Previous periods

    Hi All,
    I have added a new value field to COPA structure and regenerated the Operating Concern. But I dont know how to populate this value field for all the exsiting records. Any help would be appreciated.
    Thanks
    MKR

    I have to manually update all the COPA tables for reporting.

  • Changing value fields in COPA

    Hello,
    I want to change :
    - the text description for 2 value fields in COPA.
    - These value fields are assigned to the value field group Z002 (in the T code KEVFG), and I want to change this assignment
    by linking them to the value field group Z001.
    These 2 value fields are not any more used for 2 years. Can this change have a lot of impact in the production system?. Shall I need to generate again the operating concern after these changes?
    Thanks in advance
    Barondra BERGET

    Hi,
    If you want to change the description of a characteristic
    or value field you must change the descriptions of the related
    data element.
    Therefore you need to perform the following steps:
    1. In KEA5 / KEA6, type in the name of the characteristic/
       value field and click on the create / change button
    2. On the next screen, double click on the data element of your
       characteristic/value field
    3. On the 'Display Data Element' screen, click on the tab strip
       "Field label".  You can see the four field lables short, medium, long
       and heading.  You should change all four field labels and then
       regenerate the data element.  After having done this you may have to
       to regenerate the characteristic/value field and the operating
       concern.
       I hope this answers your query. If so please close this message by
    pressing the confirm button. Else do not hesitate to get back for more
    clarifications.
    Kind Regards,
    Abhisek Patnaik,

  • Transporting New Value Fields in COPA

    Hi All,
    I have created new value fields in COPA and regenerated the Op Concern in Dev. I need help to transport them to Quality and then to Production.
    Basically I need help on the Objects I need to select and pre-cautions I need to take.
    Appreciate your help on this.
    Thanks.
    Sree

    HI sree,
    ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
    Thank You!
    Best Regards,
    pradheep.

  • Value Field in COPA doesn't updated in Pricing Procedure

    Dear SAP Experts,
    I have a problem about Value Field in COPA.
    Why the Value Field in COPA that have been assigned to Transfer of Billing Document for Statistical Condition Type doesn't updated in Pricing Procedure (SD) when Billing Posting?
    Any suggestion will be appreciated.
    Thank You
    Regards,
    Kursteilnehmer

    HI
    in pricing procedure SD consultant are creating the pricing condition rules wher these keys are purley belongs to revenue keys .the conditions wich are taken consideration these are all belongs to finding profit margin.
    coming to CO-PA the main objective of copa is analysig the profitability of particular segment .wher as in  CO-PA the most happend flow from sd saide . so wat ever conditions are taking in pricing procedure its compulsary add co-pa valu fields .to take the reports.
    even though in FI-SD interface levele this pricing is taking greater place to flow the values with the help accounting keys.
    coming to stastical condistion co-pa is real cost object

  • Is it possible to have Auxiliary Cost Component as Value Fields in COPA

    Respected Gurus,
    Is it possible to have Auxiliary Cost Component as Value Fields in COPA - Please Advise?
    Thanks
    PM

    Hi Praveen ,
    It is possible.. in Transaction KE4R .. we have to specify the cost component structure .. where you map the cost components with value fields..
    Please use your auxiliary Cost Comp Structure in KE4R to achieve your purpose
    Regards
    Sarada

  • How can I pass a value field to a global variable?

    I have a doubt,
    I wnat to know if is possible to pass a value field to a global variable inside of DataFlow?
    That a try to do is at the time to execute a JOB on line (real time), depending of the value field that i receive, only certain DATAFLOWS will be executed  depending of the value field.
    I hope you can help me.
    Kind regards!!!

    It can be done via various ways, your approach is kind of odd, though.
    You are saying you have one kind if Input message, depending on the flag you want to do different transformations. The way you envision that is by loading that flag into a global variable and use different dataflows then.
    Can you use different dataflows within one Realtime Job? Yes, usually the first loads an in-memory datastore.
    Can you write into a global variable? Yes and No. Not directly, but you can write the value into e.g. a database and using the sql() function read it from there. But why would you. You could write it into the in-memory datastore. And then you run your n dataflows, each has a filter. So only one of these dataflows will actually process the data.
    Are there other approaches? I would have a Case transform at the beginning and route the data into different queries depending on the data. So all in one dataflow. Your approach is fine for a batch dataflow where a dataflow is started, does something and then ends. But that's not how it works in Realtime!

  • Changing Value field in COPA

    Hi,
      We have already posted a billing document. The material contains alternative unit of measurement. In the material master the alternative unit of measurement has been maintained wrongly. Due to this the report in copa shows a wrong picture in terms of units sold and the respective COGS for the material. Now we have changed the alternative unit of measurement.
    But how to change the value in the value field. Kindly help me in this regards
    Example: Material 1 Base unit : M2, Sale unit PC. Alt UOM wrongly maintained: 1 pc = 100 M2. Sold qty = 10 Pc, sold qty in Base unit : 1000 M2. Actual UOM : 10 PC = 100 M2, Actual old qty : 10 PC , 100 M2. 
    Regards

    Hi Vasantha,
    For this you can do manually cancel copa line item by using
    T CODE- KE4S00 ofter you post line item correctly (please maintain correct alternative unit of measurement )by using
    T CODE - KE21n .
    K.Satish
    With this method you will delete CO-PA line item and you will loose connection to the original billing document.
    Tapio

  • Deleteing Characteristic/Value field in COPA

    Hi
    How to delete a characteristic or valuefield from existing operating concern.?
    Thanks,
    Santosh

    Hi Santoshreddy,
    As far as my experiences is concerned, once a value fields and/or characteristics has been created it cannot be deleted if the characteristic has been used in the operating concern. Therefore this means no postings had already triggered the COPA using such characteristic. Instead of deleting a characteristic, you can change the config through KEQ3 wherein you would limit its use or make no use of it at all. Pick the radiobutton that you desire.
    For more details regarding COPA details please refer at this link.. http://help.sap.com/saphelp_46c/helpdata/en/c6/f22c7dd435d1118b3f0060b03ca329/frameset.htm
    Regards,
    JeCCas_DJ

  • New Value Field in COPA

    Hi
    I have created new conditions in SD. These have been assigned to a value field which was never assigned to any conditions. Now this KE4I config is moved to test system and I found that values of these conditions are not appearing under new value field.
    Earlier these new conditions were assigned to old value field and those were coming correctly in billing doc. Still these conditions values are appearing under that old value field.
    Am I missing any step ? Please help
    Raj

    HI,
    Billing document value flow is as per KE4I mapping to value fields.
    There are some value flow analysis tools under CO-PA to check your settings with respect to value flows. Use transaction KE4ST (Simulate billing document transfer -> Value flow (<Ctrl +F7>) to check where things went wrong.
    Hope this helps.

Maybe you are looking for