Can we Monitor third party Windows servers through Cisco Prime

Hi Team,
We are using Cisco Prime assurance and are currently monitoring Cisco UCCE Components through it.
Meanwhile we have few third party windows servers , which we would like to monitor it through Cisco Prime , just to maintain a single monitoring tool.
If yes, please share the steps or link.Also highlight the limitations in that.
Regards,
krishna

Seems Cisco Prime Assurance Manager is now obsolete and end of life already.
It is replaced by Cisco Prime Infrastructure. CPI supports third party/vendor devices to some minimum extent with limited management details collected via SNMP Templates.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Similar Messages

Can I use third party Windows CE based touch panel to control my system?

I want to use a WindowsCE based touch panel to control my system by connecting a CompactDAQ to it through USB and installing the.exe file built from LabVIEW and installing the CompactDAQ drivers.
It sounds doable, but I don't know if WindowsCE does support those .exe files or the hardware drivers or if there is something I can do to make it support them. I hope anyone has an idea about this and can help me.
Thank you
Solved!
Go to Solution.

I found the following statement at :
LabVIEW Touch Panel Module Getting Started Guide
http://zone.ni.com/devzone/cda/tut/p/id/5868
"The deployment procedures discussed previously for NI touch panels are not guaranteed to work for third party touch panels. If the use of a third-party touch panel is desired it must met certain requirements in order for the LabVIEW touch panel module to properly work with it.
The LabVIEW Touch Panel module only officially supports the two operating systems and two processors that the NI touch panel devices are based on. The operating systems supported are Windows CE 4.2/5.0 and Windows XP Embedded, while the supported processors include the StrongARM, XScale, and x86.
Another consideration when using a third-party touch panel is that a LabVIEW Touch Panel Deployment License must be purchased for each deployment of an application developed with the LabVIEW Touch Panel module.
In addition, specific Microsoft tools must be installed on the touch panel target in order for the LabVIEW Touch Panel application to function as expected. The following Microsoft eMbedded Visual Tools need to be installed:
Microsoft eMbedded Visual C++ 4.0
Microsoft eMbedded Visual C++ SP 4 or later
SDK for Windows Mobile 2003-based Pocket PCs
Reference the Where Can I Find the Microsoft Tools I Need for the LabVIEW Touch Panel Module? knowledge base article to find links to the current Microsoft download sites."
Kareem W.
National Instruments
Web Product Manager

Can we upgrade IOS in WLC 5508 through CISCO prime?

I have CISCO prime 2.0 and CISCO WLC 5508 HA SSO pair.
I would like to upgrade the software code for the WLC HA pair.
Can I do through the CISCO prime ......
As per the link :http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId-43571
1. After the WLCs are configured in the HA setup, the Standby WLC cannot be upgraded directly from the TFTP/FTP server.
Prime do the upgrade through FTP server , so will it be ok if we do the upgrade through it, for HA WLC.

Please check this link to upgrade wLC software in HA setup.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html
Once the Primary WLC complete the upgrade , it will transfer the entire image to the Standby WLC via the Redundant Port.
Regards
Dont forget to rate helpful posts

Third Party Process (PR through Sales Order)

Hi all,
I have to configure the third party scenario (PR through Sales order) for one of my client.
So can anybody tell me what are all pre-requisite / settings from the configuration point of view as well as from the transaction point of view.
Thanks
Shubham

Hi,
here is some stuff regarding third party purchasing,
may be it will use ful,
u2022     The item category group (BANS) in the sales:sales org.data screen of the material master controls whether or not the material will always be a third party material. In this case, the item category in the sales order will be defaulted to u201CTAS.u201D   If the material is also procured internally, then the item category group can be set to u201CNORM,u201D and the material can still be used for third-party processing if desired.
u2022     The item category in the sales order (TAS) informs the system that      procurement data must be maintained for the order. In addition, this item category results in a purchase requisition being automatically created with its item   category defaulted (S).
u2022     The purchase requisition is created as a result of a sales order. For each schedule line (quantities for sales orders broken up by dates of delivery), a purchase requisition item is created, provided that the item category on the
sales order is u201CTASu201D for third-party. The purchase requisitions created can
be viewed and even edited from the schedule line screen (Edit-
Procurement Details).
u2022     Changes in quantities, dates and account assignments in the purchase order result in the automatic changing of the sales order.
u2022     A desired vendor (informational field) can be specified in the sales order in the procurement data for the order. In addition, a fixed vendor may be assigned in this data if known at the time of the sales order. This then becomes the supplier for the third-party items. If the vendor is not specified in the sales order, the purchase requisition goes through the normal source determination.
u2022     The account assignment in the purchase requisition can be either the sales order (C), or aux. account assignments (X).
u2022     Once created, the third-party purchase requisition follows normal
purchasing procedures.
u2022     Customer delivery information is copied onto the purchase requisition from the sales procurement data.
u2022     If you create delivery schedules or change quantities during the purchasing process, these automatically get copied back to the schedule lines on the
sales order.
The goods receipt indicator can be found in the purchase requisition which can be edited from the sales order (Click on Item line- Hit Schedule Lines button -Hit Purchase Requisition Button). This indicator determines whether or not the customeru2019s goods receipts are monitored. When the indicator is off, invoice verification is done against the purchase order quantity, and the delivery of goods to the customer is not input into the system
chenna
Edited by: lakshmi reddy on Oct 6, 2010 2:23 PM

Security settings change when rendered from third party Windows 2008 R2 server

We created a fillable PDF form in Adobe Acrobat and made it Reader extended. Opening the form on a local hard drive the security settings show that Signing: is Allowed. We can sign documents in the form with a signature pad.
After we upload it to a third party Windows server 2008 R2, and we later go to access the form, the server renders it back to us in Adobe Reader. We are unable to digitally sign documents in the form with a Topaz signature pad. We notice that although the form was originally created with the form being Reader extended the security settings change to Signing: Not Allowed.
How can we get the server to render the document back to us where we can digitally sign documents in the form?

The second file still shows the extended rights header is present (it's warning you about restrictions at the top of the dialog while also reporting the method is "no security") but the digital signature which grants those extended rights will be invalidated if *anything* in the file structure is changed. I suspect in this case that the server software is doing something to your file; it may be trivial such as adding an XMP tag, but it's enough to break the hash check.

A third-party directory servers/security provider (LDAP)

Here is a scenario. If a security provider is a third-party directory servers that supports LDAP, is there a way to define roles in my schema table but LDAP be my authentication security provider? Sounds like a double security provider! (Looks like I had asked something similar long time ago)
Or does the LDAP server needs to be a real provider (authentication and authorization and handle roles as well and not leave anything for me except permissions) while I set up permissions in system-jazn-data.xml and define roles in web.xml that matches the roles in ldap?
Since the third party security provider throws in a login dialog, I may not have to use custom login module. But, I want to set up permissions. Hope I am making sense. Default realm jazn will now be replaced by something that says it is ldap. Is that assumption correct?
If I make sense, please point to a doc about the above scenario.
Thanks

Hi,
Here is a scenario. If a security provider is a third-party directory servers that supports LDAP, is there a way to define roles in my schema table but LDAP be my authentication security provider? Sounds like a double security provider! (Looks like I had asked something similar long time ago
You can use this scenario assuming you have a LoginModule that gets the authenticated user from LDAP and then queries the database for the security roles. This however doe not work with any of the LoginModules that are published on OTN or contained in OC4J
Frank

Why can´t i connect to Windows servers after installing Lion?

Why can´t i connect to Windows servers after installing Lion?

Me too!
MacBook Pro 15" 2011, OS X Lion 10.7

Adobe Muse CC Form for third party hosting servers

I start using the new adobe muse cc forms for third party hosting servers and i have this website for one of my customers i create a CONTACT FORM on the website and when try to submit it says "server encontered an error" i chat with adobe support they send me a URL with the options to fix my problem and then when i run this URL "http://mistercoffeediaz.com/scripts/form_check.php" everything is working fine. Please any somebody help me how to work this issue around. THKS..

Responded to your other thread - http://forums.adobe.com/message/5555450#5555450.
Thanks,
Vinayak

How can I enable third party cookies?

How can I enable third party cookies?

Demo, I just did some reseach on this question and while one an set iPad to accept cookies, from what I read, it doesn't work for 3rd party cookies. Maybe I'm not getting it though, which is certainly possible..

Can you specify third party JMS Provider in Weblogic appserver configuration

          Can you specify third party JMS Provider in Weblogic appserver configuration ???
          Only place i know of is that you can specify third party JMS Provider in MDB configuraion.
          DOES Weblogic has some kind of configuration files where you specify JMS Provider
          info (Like you can do that in JBOSS)


You can also specify a third-party JMS provider using the Messaging Bridge,
          which transfers messages from one queue or topic to another.
          And in general, inside WLS you can use any JMS provider you wish anywhere
          that you can also use WLS JMS. In an upcoming release, there will also be
          some support to make foreign JMS providers a little easier to configure.
          But why would you want to use another JMS provider anyway? ;-)
          greg
          "Neeru Munjal" <[email protected]> wrote in message
          news:[email protected]..
          >
          > Can you specify third party JMS Provider in Weblogic appserver
          configuration ???
          >
          > Only place i know of is that you can specify third party JMS Provider in
          MDB configuraion.
          > DOES Weblogic has some kind of configuration files where you specify JMS
          Provider
          > info (Like you can do that in JBOSS)

Can we integrate third party tool with solution manager

Can we integrate third party toll with solution manager , If it is possible what API's we have?

Hi Santosh Asuthkar,
thank you for your answer.
I've already read the steps in trx. spro and several documentations in sdn.
There was a hint to trx. ictconf, wsconfig, lpconfig, wsadmin. If you call these transactions there
is a message that these trx. are old and trx. SOAMANAGER should be used.
Question is how to activate the webservice "ICT_SERVICE_DESK_API" in SOAMANAGER.
I've never handled with bindings and proxy classes.
Best regards
Klaus

Compressor Audio plug-ins (can you add third party audio plug-ins?)

Compressor Audio plug-ins
Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
cheers
steve

Hi B
Really sure You are looking into Your "user" folder ?
In this there is a folder with in my case "my account" eg "Bengt"
in this ther IS a library folder
and in this ther should be an iMovie folder. If not I would make one
and into this put a folder "Plug-ins" and in this put Your plug-ins.
Restart Your Mac and open iMovie and see if it found the new plug-ins.
Yours Bengt W

How can you handle Third Party Payment in Oracle Payroll

People I hope you all are at your Good Health!
I have a question and that is i would like to know how i can restrict a dependent from getting an Insurance benefit after he has crossed the Age =18 Also the To date must be calculated and populated automatically.
Also, how can we handle this third party payment in the Oracle Payroll.
All comments are welcomed.
Chetan

For the payment piece, create a payment method on the person record as a third party. you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check .
Ankur thank you for the response i have understood that we must create a Payment Method and Check the Check box for Third party Payment on Payment Method window.But how will that be handled for case where an employee has taken a Loan from a Bank and he has to be deducted every month from his salary how can we handle such a requiremet.
I did not understand when you said :
"you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check ."
Could you please explain me.
Regards,
Chetan

Embedding third party windows

I am attempting to set up a Labview wrapper around a third-party vision system. The labview wrapper is intended to control systems external to the vision system. The vision system is accessible through calls to a DLL. A particular call to this DLL will produce a borderless window that displays video from the vision system.
While I could call image data frame by frame from the dll, I would rather embed this 3rd party display in my application as a child window. Unfortunately, I am not familiar with the Microsoft windowing systems or how labview handles it.

A long time ago I used the windows dll to do something like this (I think user32.dll), the process was to get a handle to the window and then make it a child of the labview window, it did work. Dont know if this is still able to be done (I did this on windows XP) somewhere there are some examples of wrapper functions on the windows dll.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

How can I include third-party javascript libarries in my WebUI app?

I would like to include a third-party javascript library, for example MochUI or something similar and combine it with elements in a generated BSP WD application to enhance the user experience.
Is it possible? How would you do this?
Thanks,
Martin

Hi Martin,
This is possible but be wary of conflicts between your 3rd party library and SAP JS - they use '$' as a function name which libraries such as JQuery also use as a shortcut for their functions. In the case of JQuery, this can be overcome using the noConflict() method.
Patrick.

Can we Monitor third party Windows servers through Cisco Prime

Similar Messages

Maybe you are looking for