Can we move the Organisation structure from DEV to Quality to Production?

Hi Experts,
Can we move the Organisation structure from DEV to Quality to Production?
If yes, I believe that we have to change backend details at some areas.
Please any one provide procedure and precautions for doing this, In general how we have to proceed?
Thanks
Reshma

Hello Reshma,
See program documentation from PFAL transaction (ALE distribution of HR Master Data).
You will need:
- an evaluation path,
- a distribution models for sender DEV > receiver QUAL and sender QUAL > receiver PROD for correct message type.
Regards.
Laurent.

Similar Messages

How can I get the XML structure from a flat structure?

Hi all,
in my XI SP 12 I use a JMS adapter to read information using the WebSphereMQ transport protocol.
The structure that I receive have this format:
<Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value>
<NumberRecordType_B><NumberRecordType_c>
<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
the problem is that in this structure each line is not separated by a carriage return or a comma, I have all the information in a single line:
<Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value><NumberRecordType_B><NumberRecordType_c><Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>...<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value><Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>...<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
and the customer don't want to insert a line separator.
Then, the question is:
How can I get the XML structure from this structure?
If possible, I don't want to develop new Module and add it in the JMS Module Sequence.
PS I have already read the article "How to Use the Content Conversion Module with the XI 3 J2EE JMS Adapter.pdf" and it doesn't seem to help me.
Best Regards,
Paolo

To get context parameters from your web.xml file you can simply get the ActionServlet object from an implementing action object class. In the perform (or execute) method make the following call.
ServletContext context = getServlet().getServletContext();
String tempContextVar =
context.getInitParameter("<your context param >");

I have 528 contacts on my phone, but only 290 on my Icloud how can i move the rest over from my phone to my Icloud nothing is working

I have 528 contacts on my phone, but only 290 on my Icloud how can i move the rest over from my phone to my Icloud nothing is working

Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted (they will still be in iCloud).
Download the app My Contacts Backup to your phone. Use this app to backup the remaining contacts on your phone (from your exchange account) as a vCard attachment to an email that you send to yourself. Confirm that you have received the email on your phone.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), set this to iCloud. (This will cause new contacts added to your phone to be added to the iCloud account.)
Go to Settings>Mail,Contacts,Calendars...tap your exchange account and turn off contacts syncing (otherwise you will end up with duplicates on your phone).
Open the My Contacts Backup email and tap the attachment to import the contacts from your exchange account back to your phone. They will be added to iCloud and appear on icloud.com and any other devices syncing contacts with your account.

Can i move the trash bin from the right hand side to the left (i am left handed)

can i move the trash bin from the right hand side to the left

Sorry, but I never use full screen for anything except an occasional web video. These are my Dock settings and the 66 icons on it take up little real estate.
This is what mine looks like, SL version.

How can i move the tool bar from left to right

Hi People
I was wondering if anyone knows how to move the tool bar from left to right in Adobe Illustrator Draw mobile app.
i'm left handed and i like the tool bar to be on the right.

Maybe you can mark your answer as the answer? I'm creating a guide on switching from Ideas to Draw so I'll make sure to add this.

Transport Request for creating Organisation structure in DEV and Quality.

Dear Gurus,
I have a issue regarding transport request creation for creating organisation structure.
My client has their own basis team, Iam doing the customization in Dev server, when iam creating organsiation structure in dev server ( Easy Access) iam unable to generate transport request, Their basis team is saying that no transport request is created in easy access.
My question is weather transport request is to be generated in Dev (Gloden client) for creating organsiation structure or not. Please guide me.

Hi Ravi,
You can try report RHMOVE00.
It is up to you to either maintain the org structure in dev server and tranport to quality or maintain it directly in quality.
Regards,
Dilek

How can I move the aperture program from my old Mac to my new Macbook Pro?

I have Aperture 3.2 on my old Mac laptop and would like to know how to move it over to my new macbook pro retina laptop. I tried to just move it from my external hard drive, but that didn't work. Can I use the migration assistant to transfer this and only this program to my new laptop?
Thanks,
Shirley

Apple Pro Apps like Aperture really do best if installed from the original media that hey were bought on. Trying to migrate Aperture can lead to a lot of frustrating problems.
The libraries can be copied over just as you would any file but the application itself needs to be installed.
How did you purchase Aperture? If you got it in the Mac App Store then all you need to do is log into the MAS from the new computer using the same Apple ID you used to buy Aperture and download it.
If you bought it on DVD you will need to install from those and then run software update to get to the latest version. Remember if you bought it on DVD you will need the original serial number that was included in the package. Also if this was and upgrade from an earlier version (1 or 2) you will need those serial numbers also.
regards

Can I move the Lightroom Catalog from one location to another?

Lightroom by default, places the Lightroom Catalog in the Pictures folder on my PC. My image library though, is located on an external hard drive. I've read that it is better to have the Catalog at the same location to avoid disconnected images, which sounds reasonable. Is it feasable to move the Catalog over to the same drive as my image library, or will that cause a problem? In other words would I need to start over again and create a new Catalog on the external drive? I know this sounds like a dumb question, but I've learnt to my cost that the obvious solution isn't necessary the correct one.

For better performance it is preferable to have the catalog located on an internal hard drive. By default the catalog and the preview files have to be located in the same folder since there is continual read/write taking place while working in Lightroom. Lightroom does not make any changes to the original files so its fine for them to be located on another hard drive internal or external. Lightroom loves lots of hard disk space to operate so if your catalog is on an internal drive make sure it not starved for disk space.
However its ok for your catalog/previews files to reside on an external HDD with your original photo files.
Your photo files can reside on a HDD conected to a network but your catalog and preview files cannot be located on a network.
e.g I have my catalog / previews on the main HDD with my operating system with over 50% free disk space. My Photo files are on a secondary internal HDD with over 75% free disk space. I back up to external HDD.

Problem with Ai when working with a logo (I just can´t move the logo quickly from one point to another) Help!

Hi there, Hope everyone is well. I have troubles with my Ai when working with a logo, I just want to move it from one point to another and it gets pretty slow to be moved. I am working on a brand new iMac and this problem surprises me a little bit. Do you know why is this happening? I get de Ai from the Creative Cloud...could it be the internet?

Thnks rcraighead, glad to know about how CC runs. The logo was before a jpg then our designer transform it into vectors but today we were working she found complicated to move the image, it takes secooonds to make it move either from the keyboard or the mouse. I will ask her to see the symbol option, I think she is working with several logos (in vectors) at the same archive...so let see. Thanks buddy! I will be back with a screenshot

How can i move the itunes appdata from music folder to another folder?

I want to get rid of all the database files in my music folder as other applications scan this folder for new music and it takes them forever to scan the itunes folder in the music folder because of all the folders for artwork etc.
i thought that is what the %username%\appdata folder is for?!
the help documents on the apple page just show me how to move my music, which is in the right place, but not the database xml and covers...

Move the iTunes Library elsewhere, launch iTunes with the Shift key held down, and point it there.
(60614)

Error while exporting/transporting the Business system from Dev to Quality

Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
Ramesh

Go through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful

How to Transport changes from Dev. to Quality and production

Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
Prasad

Hi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

Can I move the sidebar (bookmarks) from the side to the top?

Before I updated to Yosemite yesterday, my favorites/bookmarks were at the top of the webpage window but, they are on the left side now. I much prefer them at the top. How do I move them to top?

Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted (they will still be in iCloud).
Download the app My Contacts Backup to your phone. Use this app to backup the remaining contacts on your phone (from your exchange account) as a vCard attachment to an email that you send to yourself. Confirm that you have received the email on your phone.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), set this to iCloud. (This will cause new contacts added to your phone to be added to the iCloud account.)
Go to Settings>Mail,Contacts,Calendars...tap your exchange account and turn off contacts syncing (otherwise you will end up with duplicates on your phone).
Open the My Contacts Backup email and tap the attachment to import the contacts from your exchange account back to your phone. They will be added to iCloud and appear on icloud.com and any other devices syncing contacts with your account.

Can you move the screen menus from dvi port 1 to dvi port 2 - tweak?

Ive a 30 inch display and a 20 inch connected to my g5 - its two dvi connectors but only port 2 sends a max res to the 30" where the dvi port 1 sends around half the res options.
The 30" looks daft on a small res - so I need to plug it into port 2 to get it right, but this means that my computer all runs off a tiny 20" - what can I do other than turn off the the second screen till I get a fix?
cheers guys!

In the "Arrangement" pane of "Displays" System Preference, drag the picture of the menu bar to the picture of the other display.

Can I move the task bar from the bottom of the screen to the RH side? How?

The task bar aligns across the bottom of my screen, but I'd like to move it to display vertically on the LH side of the screen. Is this possible? If so, how do I go about it?

You're quite welcome. Thanks for marking question as answered.
Drop back anytime
Stedman

Can we move the Organisation structure from DEV to Quality to Production?

Similar Messages

Maybe you are looking for