Can we only year value from "0FISCPER" (Fiscal Year/Period) at BEx level

Hi all,
I have two time characteristics "0FISCYEAR" (Fiscal Year) and "0FISCPER" (Fiscal Year/Period). In DSO initially "0FISCPER" was there and later request came to add "0FISCYEAR". Now data in char. "0FISCPER" is since beginning (from 2000) and for char. "0FISCYEAR" is since 2010.
User's requirement is to create a report which will display data Year wise.
My issue is if i am using "0FISCYEAR" then user is not able to see year instead it shows #. I dont want to do data reloading as this is GL data and hold huge no. of records in it.
So my concern is : Is there any way to use only year value from "0FISCPER" (Fiscal Year/Period) at BEx level? Is there any setting which I can apply and get the same value of Year as I can see from "0FISCYEAR". Please assist me on this.
Thanks,
Arvind

Hi Arvind,
Your requirement can be realised through virtual characteristics.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04be008-86cc-2c10-4bad-e517ea3f4c80?QuickLink=index&…
however, I would still suggest to reload the data. you will only need to reload years before 2010 and you can do this in phases.
Hope this helps.
-Swati.

Similar Messages

  • Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year A1 ) failed

    Get red error when loading Delta data and the red error is:
    Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year A1 ) failed with value 20060426
    We went to RSA1 -> Source Systems page, right click on the source system, choose Transfer Global Settings, check "Fiscal year variants" and check "Rebuild tables" and then run it twice, but still not helpful that we always get the above red error!
    Any idea?
    Thanks

    hi Anurag,
    You are right that run OB29 on BW, find there is no any period entry for variant A1.  Since all the variant should come from R3 by run "Global Transfer Settings" on the source system, I run OB29 on R3 and find the same thing that there is no any period entry for fiscal year variant A1.  I will go ahead to ask R3 people to correct it on R3, then conduct the "Global Transfer Settings".
    Thanks

  • Ime Conversion from 0CALDAY to 0FISCPER (fiscal year) filled with value2008

    hi All,
               data load was failed.failed request is showing.Time Conversion from 0CALDAY to 0FISCPER (fiscal year) filled with value20080226.why this error is coming freqentely.i want to the reason.please help me?
    Thanks,
    chandu

    Hi,
    Pls Look for the erroneous records in PSA.
    Compare the error records with the correct one's.
    This is due to the difference in the date format..
    Follow the format in the correct records.
    For the time being you can edit these records in the PSA to the correct format and continue with the load,and later you will hav to make the changes in the source system.

  • When using the search function in mail I only see results from the current year. how can I see results from all years?

    When searching mail results only contain messages from the current year. I'd like to see results from all years. This just started after upgrading from Snow leopard to Lion.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Changing from a Fiscal year to a calendar year

    Hi Everyone,
    We need the supporting documentation, guidance to change from a Fiscal year to a calendar year. Also please share your experience, suggestions, thoughts on this?
    Currently, our year-end is SEP 30th, now there is a requirement to change the year end from SEP 30th to DEC 31st.
    N:> Keithley GL Superuser USA > Setup > Financials > Calendars > Accounting
    Calendar is already associated to the set of books and the budget year for 2011 is already opened in the Production instance
    We entered the budget through a spreadsheet upload using ADI. We can roll back the budget and reenter if required
    We have already gone through the metalink note IDs 102460.1, 134362.1, and also the below document from Oracle Support
    http://download.oracle.com/docs/cd/E15799_01/books/OnDemOLH/index.h...,
    Below are our open questions at this point
    1) Can you please let us know what would happen if the transition closes on the middle of the month
    Example: We will close the month end, year end at the end of the month but what would happen if we close at the middle of the month (say DEC 15th instead of DEC 31st)
    2) Will it be short? From 1st October 2010 - 31st December 2010.
    Or will it be long? From 1st October 2010 - 31st December 2011.
    Can you please let us know the pros and cons for each of these?
    3) According to the Metalink note Id 102460.1, the application will prevent you from making changes to calendar the unless you meet the following qualifications:
    a) All the periods to be changed have a status of Never Opened.
    This condition does not match to the current situation at the clients place as we don’t have the status "Never Opened" for any of the periods in the accounting calendar in
    subledgers
    b) A budget year that includes the periods to be changed is no t yet opened.
    Budget year is already opened for the year 2011 at the clients placec) An encumbrance year that includes the periods to be changed is not yet opened.
    “Encumbrance” is not applicable at the clients placed) The periods to be changed have not yet been copied from the GL Calendar to Project
    “Projects” is not applicable at the clients placeThanks
    Veena

    Pl post details of OS, database and EBS versions. Pl see if these MOS Docs can help
    How to change GL Calendar from a Fiscal to a Calendar year?          (Doc ID 102460.1)
    CHANGING SET OF BOOKS CALENDAR FROM CALENDAR YEAR TO FISCAL YEAR          (Doc ID 1060624.6)
    R12: Is It Still Possible To Change GL Calendar From Fiscal to Calendar Year In Release12?          (Doc ID 836263.1)
    General Ledger Calendar FAQ          (Doc ID 134362.1)
    HTH
    Srini

  • Report from 2 fiscal years

    Hi,
    GL Balances : I want to take out the report from 2  fiscal years, 2009 (10 to 12 period) and 2010(1 to 9 period).
    Please let me know the report name.
    Thanks

    Hi...
    Can you use FS10N, FBL3N, S_ALR_87012332 - G/L Account Statements ,S_ALR_87012282 - G/L Line Items, List for Printing , to see the year wise like
    While entering the date range we have to  enter from 01.10.  2009 to 31.12.2009 or from 01.01.2010 to 31.09.2010
    But you can give both date range at a time
    I hope it will helps
    Regards
    vamsi

  • The fiscal year specified differs by more than a year from the fiscal year

    Dear All
    To rectify depreciation posted at development server I run OAGL which reset all depreciation posted (From FY 2008 to 2010), now when I am trying to post depreciation by AFAB for FY 2008 system showing error message
    No posting possible in fiscal year 2008
    Message no. AA688
    Diagnosis
    No posting is possible in the fiscal year 2008 specified. The fiscal year specified differs by more than a year from the fiscal year in which the last postings were performed.
    Procedure
    Correct your fiscal year specifications.
    please advice me what step to be follow
    Regards
    Sekhar

    Hi Sekhar,
    Error AA688 typically occurs in two situations:
    1) A company code did not have any depreciation posted in the previous year. See note 144441.
    2) If in a comany code no depreciation has been posted ever, then it is important to note that the periods of the last depreciation posting  in table TABA and the year and period of the last depreciation posting in table T093D (fields AFBLPE and AFBLGJ) are initial. You can set these fields to 000 / 0000 with the correction report attached in SAP note 26073.
    See if any of this information helps you further.
    Brigitte

  • How can i get all values from jtable with out selecting?

    i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
    Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
    thanks in advance.
    raja

    You could set the table's data model to be the same:
    output2.setModel( output1.getModel() );

  • Can't retrieve bean value from jsp!

    Here's the chain of events for my web app:
    JSP form (get info from user) -> forwarding jsp (uses bean to save info submitted to form)-> servlet (retrieves info from DB) -> JSP (presents DB info to user by populating values in text fields from original form)
    Right now, I can access all the values submitted to the first JSP from my servlet. However, after my servlet retrieves the info from a db and stores it in a bean and forwards the request (using requestdispatcher) to the 2nd JSP, I can't get the values from the bean from the 2nd jsp. I was able to use the bean to store the information submitted to the original JSP, however.
    Here's some relevant code:
    FROM FORWARDING JSP (which saves user-submitted info in bean)
    <jsp:useBean id="fxFormBean" class="fxmatcher.FxFormBean" scope="request"/>
    <jsp:setProperty name="fxFormBean" property="*" />
    <jsp:forward page="/FxMatcher" />
    FROM LAST JSP (which should populate form fields)
    header stuff:
    <jsp:useBean id="fxFormBean" class="fxmatcher.FxFormBean" scope="session"/>
    info retrieval:
    <INPUT TYPE="text" NAME="fx_key" value="<%= fxFormBean.getFx_key() %>">
    I wrote this JSP based on the example given here: http://www.jsptut.com/Editing.jsp, but I'm not getting the value from the bean. The result JSP just has value="".
    I'm pretty sure that my servlet is saving the info to bean correctly, but here's the code anyways:
    //retrieves info from DB
    FxFormBean fx = (FxFormBean) request.getAttribute("fxFormBean");
    fx.setFx_key (traderKey);
    fx.setAa_block(agent_block);
    fx.setAddition_to (additional_to);
    log("trader key: [" + fx.getFx_key() + "]"); //debugging code
    My debugging code did print out the correct info, so I don't think there's anything wrong with the bean or the servlet.
    I would appreciate any help. Thank you very much.

    The first JSP puts the bean in the request, the servlet retrieves the bean from the request and updates it but in the second JSP you set the scope to session:
    <jsp:useBean id="fxFormBean" class="fxmatcher.FxFormBean" scope="session"/>
    So the second JSP is looking in the wrong place for your bean. Change the scope in the second JSP to request:
    <jsp:useBean id="fxFormBean" class="fxmatcher.FxFormBean" scope="request"/>

  • I can not get link-value  from af:tree.

    Hello.
    I use jdeveloper 10g.
    I can not get link-value from tree.
    I use following code:
    <f:facet name="nodeStamp">
    <h:panelGroup binding="#{backing_dialogDic_dic_ETS.panelGroup1}"
    id="panelGroup1">
    <h:outputText value="#{item.vidNum} #{item.vidName}"
    binding="#{backing_dialogDic_dic_ETS.outputText1}"
    id="outputText1"/>
    <af:commandLink
    binding="#{backing_dialogDic_dic_ETS.commandLink2}"
    id="commandLink2"
    action="#{backing_dialogDic_dic_ETS.returnObject}">
    <af:setActionListener from="#{item.idVid}"
    to="#{processScope.ETSId}"/>
    <af:objectImage source="/images/icons/10.gif"
    shortDesc="Выбрать"
    binding="#{backing_dialogDic_dic_ETS.objectImage2}"
    id="objectImage2"/>
    </af:commandLink>
    </h:panelGroup>
    </f:facet>
    </af:tree>
    //in java bean:
    public String return_Object() {
    Object ob = JSFUtils.getManagedBeanValue("processScope.ETSId");
    System.out.println(o);
    return null;
    In console I see null.
    How I get this value???
    I can get this value if i use treeTable instead of tree.
    Thx, Dema.

    Hi,
    not that I think it matters, but the processScope is not a managed bean but a memory scope. So if
    JSFUtils.getManagedBeanValue("processScope.ETSId");
    assumes a managed bean then this may be incorrect as most likely there exist no managed bean with this name. You should be able to access the process scope from AdfFacesContext.getProcessScope(), which then returns a Map, which you call get("ETSId") on
    Frank

  • How can I get one value from local machine registry

    how can I get one value from local machine registry, I would like read one value of regitry. I have windows NT workstation. I need it to find the full path of iexplore.exe, this value is in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\IEXPLORE.EXE'
    Thanks.

    You can use the D2KWUTIL.pll library to read/write to the registry. You have to install the forms examples to get the library.
    The library d2kwut32.dll must also be installed at the clients.

  • [MDX]can't get the value from two variables (@FromDimTimeFiscalYearMonthWeekLastDateDay &(@ToDimTimeFiscalYearMonthWeekLastDateDay

    can't get the value from two variables when execute MDX : Anyone who can help ?
    ================================
    with member [Measures].[APGC Replied Volume] as
     ([Measures].[Question],[Dim Replied By].[Replied By].&[APGC])
    member [Measures].[APGC Moderated Volume] as
     ([Measures].[DashBoard Thread Number],[Dim Moderated By].[Moderated By].&[APGC])
    member [Measures].[APGC Answered Volume] as
     ([Measures].[Question],[Dim Answered By].[Answered By].&[APGC])
     SELECT
     NON EMPTY
     [Measures].[Forum Thread Number],
     [Measures].[Reply In24 Hour],
     [Measures].[Question],
     [Measures].[Deliverale Minute],
     [Measures].[Working minutes],
     [Measures].[Answered],
     [Measures].[1D Answer],
     [Measures].[2D Answer],
     [Measures].[7D Answer],
     [Measures].[APGC Replied Volume],
     [Measures].[APGC Moderated Volume],
     [Measures].[APGC Answered Volume],
    [Measures].[Avg HTR],
    [Measures].[Avg HTA],
     [Measures].[Total Labor]
     } ON COLUMNS, 
     NON EMPTY { ([Dim Engineer].[SubGroup-Alias].[Alias].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS
    FROM (
     SELECT ( STRTOMEMBER(@FromDimTimeFiscalYearMonthWeekLastDateDay, CONSTRAINED) : STRTOMEMBER(@ToDimTimeFiscalYearMonthWeekLastDateDay,
    CONSTRAINED) ) ON COLUMNS
    FROM [O365]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS

    Hi Ada,
    According to your description, you can't get the member when using the strtomember() function in your MDX. Right?
    In Analysis Services, while the member name string provided contains a valid MDX member expression that resolves to a qualified member name, the CONSTRAINED flag requires qualified or unqualified member names in the member name string. Please check if the
    variable is a Multidimensional Expressions (MDX)–formatted string.
    Reference:
    StrToMember (MDX)
    If you have any question, please feel free to ask.
    Simon Hou
    TechNet Community Support

  • Why can I Only send mail from my iCloud Account and none of my others yet can receive from all ?

    why can I Only send mail from my iCloud Account and none of my others yet can receive from all ?

    Morning Allan ,sorry hit the wrong button. Thank you for responding . Meant to reply not notify you that my issue was solved . It's not . I imported all my settings via iTunes and all of the accounts receive mail as I said but can't send . Can you tell me exactly what to change with regard to my outgoing smtp. and PE the authentication ?

  • HT2589 why can I only purchase content from the store in my home country. Sometimes the dont have the content im after but other countries stores do

    why can I only purchase content from the store in my home country. Sometimes the dont have the content im after but other countries stores do

    Because this is how the itunes store works.

  • Asset still showing planned  value for closed fiscal year.

    *We have a situation:-  After we ran depreciation for Dec 2009, there was a credit memo posting done in the system for a particular asset.  Now, the fiscal year has been closed for 2009 and 2010 is opened. Jan and Feb depreciation posting has been done for the asset for year 2010, but the credit memo posting is still stuck as planned value in the 12th period of 2009. How can we take care of that?  I canu2019t run unplanned depreciation for 2009. Is there a better way to take care of this?  I thought about opening year 2009 for the asset (ccode) and then running unplanned depreciation. Will that be a problem? If yes, what other solution can be proposed.*
    *Appreciate the response.*

    Hi,
    If it is not possible to open the fiscal year because audit          
    has already been completed we have a workaround which is not quite   
    correct from the legal side ist thereport RACORR20_A from note 29694.
    If in table ANLC there are differences between posted and planed     
    depr. the report simply makes: planed = posted.  
    The correct way would be:
    ->  Reopen your GL for FY 2008 via OB52.      
    ->  Recalculate values  (RAAFAR00)                                  
    ->  RAPOST2000                                
    ->  RAPERB2000                                
    ->  RAJABS00                                  
    Regards Bernhard

Maybe you are looking for