Can we open schedule with specific members?

Hi,
Is it possible to open an input schedule with specific members of dimensions selected?
We know it can be done by using EvHOT, but is there any other method?
more specifically, we want every user to open schedules with Periodic is selected as the member of Measures dimension.
Thank you

In addition to (or instead of) the previous reply, I suggest using
eTools --> Workbook Options 
(also in the current view bar as "Set Workbook Options").
Check "Save the active session CV with this workbook".
It will keep the current view (CV) that you are using when you save the workbook, so it will reopen with that same view, instead of what the user has pre-set.
I also recommend hard-coding the Periodic option within the control panel itself, so it does not refer to the CV.

Similar Messages

  • Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

    Tried opening a file in library and it states can't open database with library name? It says Relaunch then will not open? and Blocks me completely from Aperture. I have to go to Finder to Rename it? I need this file how do I get it to open?

    Aftershotz,
    You're going to have to give a bit more information.
    What do you mean by "opening a file in library?"  There is no function of Aperture to open files -- you can open (switch) libraries.
    You'll have to be more specific about error messages, too.  Perhaps some screenshots would be useful to diagnose your problem.  "Can't open database with library name" is not enough detail about what Aperture is really telling you.
    nathan

  • How can i open period for specific user in OB52.

    Hi Expert,
    How can i open period for specific user in OB52.  As 'Authorisation Group' field is there in OB52, how can i use this field to restrict the specific user to post for particular period.  How can i creat authorisation group and where can i assign it to the particular user...
    Please let me know?
    Thanks and regards,
    Sam.

    Hi,
    Here is the detailed process as outlined in SAP help.
    Procedure
    If only a limited set of users is to be able to post in a particular posting period, proceed as follows:
    Add the posting period authorization (authorization object F_BKPF_BUP) to the authorizations of the selected users. Assign an authorization group (e.g. '0001').
    Enter the account type '+' for the posting period variant to which the restriction is to apply. Enter the period(s) whose use is to be restricted in the first period, those which are available to all users in the second period, and the authorization group (e.g. '0001') in the last column.
    Examples
    A posting period can be successively restricted. If, e.g. 10 users have the posting period authorization with authorization group '0001', and 3 of these 10 users also with authorization group '0002'.
    If the period is only to be accessible to the 10 selected users the authorization group '0001' is entered in the posting period variant. Access can later be restricted to the remaining 3 users by entering '0002'.
    Thanks
    Venkata Ganesh Perumalla

  • Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path

    Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path using any of these perfectly normal methods:
    1. double-click file in the Finder (e.g in a Folder on your Mac or on your Mac desktop etc.)
    2. select file and choose "File... Open" command-o in the Finder
    3. drag file to the application icon in the Finder.
    4. Select file in Bridge and double-click, choose File.. Open.. or Drag icon to InDesign icon in dock.
    If you try to open an ID file named with a "#", you will get an error message "Missing required parameter 'from' for event 'open.'"
    This happens to any InDesign file that has a "#" (pound sign, number sign, or hash) in the filename or in the file path (any parent folder).
    To reproduce
    Name an InDesign file Test#.idd Try to open it in the Finder or Bridge (as opposed to the "Open" dilaog of InDeisng itself).
    "Solution"
    The file WILL open using File... Open... command-o while in InDesign application.
    Rename the file or folders that have a "#" (shift-3) in the filename.
    Report to Adobe if it bugs you.
    This does not occur in "plain" Leopard 10.5 nor Tiger 10.4
    Untested in Panther or before and
    Untested with CS3 and earlier in Snow Leaopard.
    Anyone have those and want to try this... ?

    In case this really bothers you: we've added a workaround for this into Soxy. If you enable the option, these documents will open fine on double-click.
    You need Soxy 1.0.7 from:
    http://www.rorohiko.com/soxy
    Go to the 'Soxy' - 'Preferences' - 'Other' dialog window, and enable 'Open InDesign via Script'
    (Irrelevant background info (it's all invisible to the user): the workaround works by special-casing how Soxy opens documents in InDesign: instead of using AppleScript, Soxy will use ExtendScript to instruct InDesign to open the document - which works fine).

  • Can't open raw with lumix gx1 elements 9

    Hi Group,
    Windows 7, Elements 9   Panasonic lumix gx1
    I tried acr 6.5 but it won't open the lumix raw files.  One site I found said that this camera needs 6.6 but that update failed.  I don't won't to update to elements 10 as I see no reason to do this.  Does anyone know what or if it's possible to get these files to open in Elements 9?
    Thanks,
    Michael

    I finally downloaded the coverter.  I refuse to buy Elements 10 when there is nothing new that I need.  Maybe 11 when I see what it does but I doubt it.  The coverter works just fine. Michael
    Date: Sat, 18 Aug 2012 23:08:17 -0600
    From: [email protected]
    To: [email protected]
    Subject: can't open raw with lumix gx1 elements 9
        Re: can't open raw with lumix gx1 elements 9
        created by sjpix in Photoshop Elements - View the full discussion
    Actually, the problem is that Adobe seems to be wanting to force their users into purchasing otherwise unnecessary upgrades.  I, too, use Elements 9, and it does everything I need...except read the RAW files from my new GX-1. Yes, I can download the DNG converter (and I have), but that adds an extra, and unnecessary, step to processing.  Adobe's reputation for not respecting their customers isn't unwarranted.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4631806#4631806
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4631806#4631806. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Can't open NEF with Camera Raw from Bridge

    I recently updated to CS6 and got a new Nikon D600.  Downloaded the lastest DNG converter but when I pull up files in Bridge I can't open them with Camera Raw anymore.  My process was to open in Bridge.  Select the NEF files I wanted then click mouse+control, which gave me a menu to open in Camera Raw.  Now my only option is Photoshop CS6.  I downloaded the trial for Photoshop CC and Bridge CC but still can't select to open with Camera Raw.
    What is going on?  I have never had issues like I have been.  HELP Please.

    From your description it sounds as if Camera Raw isn't installed, or is installed incorrectly. In Photoshop go to Help/about plug-ins/Camera Raw and verify that you have it installed correctly. Since you are on a Mac, I cannot advise as to where it should be installed.
    The other thing I have been thinking about in your situation is, how were these images downloaded from your camera?if you used an older version of Nikon Transfer it can alter the files so that they cannot be opened in Camera Raw.
    Do you have other software like ViewNX2 or CaptureNX2, and will those programs open your files?

  • Can't open pdfs with Adobe Acrobat X

    I can't open pdfs with Adobe Acrobat X. I get this message:
      Warning: Distiller will not process .Log, .PDF or .JDF file extensions
    What do I need to do to be able to open .pdf files? I could open them previously.

    What are you getting the message in response to? Was this a creation of a PDF that resulted in the message? What are you using Distiller for? Distiller can only open PS and EPS files for processing to create a PDF.
    PDF files are opened in Acrobat. For opening PDFs, Distiller has nothing to do with the opening. So I really have no idea. It sounds like you may just be having a creation error since you mentioned a log file. If you were creating a PDF, have you checked the LOG file for the errors? The log file is usually located where you were going to create the PDF, but is created as Distiller processes the file (part of the general Acrobat creation process) and is deleted if successful.
    If you were trying to create, go back to the original application and print to file with the Adobe PDF printer. Then open that file in Distiller to create a PDF. Any errors will be shown in the window and an indication if the PDF was created or not.

  • Can I open bkf with my mac? I have my old file with bkf format how can I open it with my new Mac Pro?

    Can I open bkf with my Mac Pro? I have my old files with bkf format how can I open it?

    That is a Windows Backup file.  I seriously doubt that there will be any way to read that on a Mac.  Do you have a Windows machine that you can use to open those files and save the contents in a more friendly format?

  • Using windows vista with two users and I can only open books with adobe digital editions on one account?

    using windows vista with two users and I can only open books with adobe digital edition

    You must authorize the second computer with the same Adobe ID.
    There are sometimes issues with this registration: if you have them ....
    Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
    Uninstalling and reinstalling does not help.
    Unfortunately, it often then gives misleading error messages about what is wrong.
    A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
    This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
    Restart ADE, and then reauthorize with your (old) Adobe ID.

  • Ipod is disabled for 22,849,620 minutes how can I open ipod with this message?

    Ipod is disabled for 22,849,620 minutes how can I open ipod with this message?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Can't open PDF with newest version of reader says it's not supported?

    Can't open PDF with new version says it's not supported?

    Since you don't answer my last question, all I can do is point you to https://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html

  • After Installing Flash Player 9, i can't open anything with Flash

    After ungrading to Adobe Flash Player 9, i can't open
    anything with flash on any of my browsers (Safari, IE)
    and it just keeps on running in circles...like it tells me to
    go to the download page and then i would download it and install
    the software, but after installation, it directs me to the
    macromedia pages and it says:
    "The page “Macromedia - Flash Player” has content
    of MIME type “application/x-shockwave-flash”, but you
    don’t have a plug-in installed for this MIME type. A plug-in
    should be available on this page:
    https://www.macromedia.com/go/getflashplayer
    Do you want to open the page?"
    and when i open the page. it's just the page where I
    downloaded the Flash Player...
    it just keeps going back in circles after i've done it like 8
    times already!
    URGGHHH!!!! help!
    now i can't open anything with flash on the page!!!!
    and just any webpage with flash movies...it would just say
    that "either your javascript is turned off or you do not have flash
    player installed" something like that!!!! SOOO ANNOYING!
    and there isn't any help on the forum at all!!!!
    anyways. i'm with Mac OS X 10.3.9 on a PowerPC Powerbook
    G4

    Are you using any MS Office third party Add-ins? Test:  Remove third party Add-ins other than PDFMaker.  Test to see if the MS Office apps run afterward.
    Did you attempt to repair MS Office?  Test:  Go to Add/Remove Control Panel run Repair.
    Finally, have you tried testing to see if it's PDFMaker?  Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker.  See if MS Office applications launch and behave correctly?

  • My trackpad can't open file with double click

    i don't know what's going on, but my trackpad can't open file with double click. i have to open it with right click, open or open with. i've tried to fix it in the system preferences, it didn't work out well.

    William - you are wonderful!  I had looked at that - they were set to 'internal' which seemed like RH...but selecting the 'design view' and then reselecting 'use default editor' instead of 'auto-select editor' did it.  THANK YOU!!!!!

  • My Mac book pro powers on and once on cursor moves but can not open anything with it.

    My Mac book pro powers on and once on cursor moves but can not open anything with it.

    ladislavfromcygnet wrote:
    Thank you Shootist007. I cannot do even Update now. I probably should have spent the same amount of money on a new IMac!
    No not really. If this is a brand new Macbook Pro take it back for a refund. Apple has a 14 day No Questions Asked return policy for Full refund.
    Take it back, get the Full Refund (DO NOT LET THEM TRY TO FIX IT. YOU BOUGHT A NEW COMPUTER NOT ONE THAT HAS BEEN WORKED ON OR NEEDS TO BE FIXED) and then decide whether to buy another Macbook Pro or the iMac. Or you could return it, get the Full refund and buy some other brand computer.

  • I CAN NOT open Iphoto with the new Mavericks????

    I can not open Iphoto with the new Mavericks, I changed Dutch for English but stil nothing ....

    Hi Kevertjes,
    Thank you for the update.  I recommend verifying that you are signed in with the same Apple ID associated with or used to purchase iPhoto on the App Store under the Store menu. 
    If you are signed in with an alternate Apple ID, I recommend signing out of the App Store, signing back in with the correct Apple ID, and then trying the update again:
    Sign out
    Choose Store > Sign Out.
    Sign in using an Apple ID
    Choose Store > Sign In, or click Sign In in the Quick Links section. The Quick Links section is located in the right part of the window shown when you click Featured, Top Charts, or Categories in the toolbar.
    Enter your Apple ID and password, and then click Sign In.
    Mac App Store: Sign in and out
    http://support.apple.com/kb/PH11499
    All the best,
    Sheila M.

Maybe you are looking for