Can we purge cache Via nqcmd and ODBC functions?

Hi All,
Can we purge cache Via nqcmd and ODBC functions?
Is this possible if YES then how to go about it?
Regards,
Apoorv

ODBC-extension functions for purging cache:
http://download.oracle.com/docs/cd/E12103_01/books/admintool/admintool_QueryCaching6.html
Regards
Goran
http://108obiee.blogspot.com

Similar Messages

  • New update 8.7.1 CS6 ACR not working---(I own hard copy not a Trial or part of CC), I purged cache in bridge, and photoshop. NO photos will open when I double clik, or  will not open again in ACR alone.  When I double clik on raw file I get Sign In requir

    I purged cache in bridge, and photoshop. NO photos will open when I double clik, or  will not open again in ACR alone.  When I double clik on raw file I get Sign In required Notice--We will now register your TRIAL to your Adobe ID-------I am alread a SUBSCRIBER-------------Yes I get this same issue in Creative Cloud and same issue. error: Camera Raw editing is not enabled-----Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature. These errors are happening inside both CS6 Bridge and CCphotoshop Bridge------NOTE----I am ALREADY signed into Creative Cloud and still get those message errors.........Need to fix ASAP.

    When you sign in to Adobe.com with the user ID and Password your using in the Creative Cloud and Photoshop does this link  https://www.adobe.com/account/my-products-services.html show that the account has a subscription?
    Also this is a user forum not a Adobe Customer Services web site.

  • My shared shows the NAS with incorrect logo and can't connect to it - can do so only via smb and ip address

    My Mac shows other MACs somethimes as PC icons as well as my Synology NAS.
    Only way to connect is via SMB and IP address - clicking on icons fails.

    I am also having the same issue. Please help!

  • After successfully importing my bookmarks through Firefox Sync from my old to new computer, can I purge the old computer and still have the bookmarks on the new

    I want to upgrade my computer and did a Windows Easy Transfer to my new one. My Firefox bookmarks did not show up on my new computer so I used Firefox Sync-which worked fine. Now that I have the bookmarks on the new computer, can I erase the old computer and still have the bookmarks on the new one.

    First, disconnect your old computer from Firefox Sync so you don't accidentally delete the data from sync, but then yes you should be good to go.

  • Can an airport receive via wifi and share via lan port  to a tv ?

    Is it possible for an airport express receive net via wifi and share it via lan port to a tv with lan card ?
    Thanks
    Jorge

    Yes, if the AirPort Express is an 802.11n model. This version of the Express support the configuration as a wireless Ethernet bridge. Apple calls this configuration a ProxySTA.

  • Can't use the Calendar, Book, and Card functions

    I have updated my iLife programs to iLife 08 and cannot use the Calendar, Book, and Card functions as the program says the themes have not been installed. However, after looking in the Library/Applications Support/iPhoto folder, the themes are there but not being recognized by the program. I have reinstalled iLife 08 but still to no avail. Help!

    Grant:
    Try the following:
    A. look for a folder title Themes in the User/Library/Application Support/iPhoto folder. If you find one there move it to the HD/Library/Application Support/iPhoto folder and reboot.
    If that doesn't jump start iPhoto then go on to B.
    B.
    Restoring iPhoto Themes
    1 - delete the current application.
    2 - delete any files with iPhoto in the file name that reside in your HD/Library/Receipts folder.
    3 - delete the Themes folder from your User/Library/Application Support/iPhoto folder.
    Also look in the HD/Library/Application Support/iPhoto folder for a Themes folder. If there is one there then delete it also.
    5 - boot into the system disk that came with your computer and do a custom install selecting only iPhoto.
    After installing reinstall the iPhoto 7.1.1 updater again followed by a repair of disk permissions with Disk Utility. Also make sure you're running the latest Quicktime, 7.3.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Can I reset my search engine to Wikipedia? I don't want any of those default Search Engines anymore they are too intrusive. And I can not Empty Cache any more and Google has taken over the address bar?

    Can someone please explain how this now works? And am I obligated to load Mountain Lion. It's a very expensive price to pay for online privacy that isn't even Private anymore. I am old enough that I don't have to pay ransome. I can just quit.
    I didn't say and was never asked If I wanted Mountain Lion. I can no longer 'Empty Cache' at the end of a session online and when I do a search now (and this has all changed overnight) the query is typed into what used to be the address bar and when the search results appear, after reading the first result and I want to read the second or fifth or Any of the other results of the query I am forced to resubmit the search in the address bar because the 'Page Back' button has been removed and the Little Red Dot closes the Search Results Page altogether.
    What else am I in for with Mountain Lion? I already know that I do NOT want anything to do with iCloud. I am willing to bet a lot of money that a pharmaceutical company one day is going to be holding me for ransome with a new drug that was created out of the symptoms of a once - upon - a - time naturally occuring symptom of aging. At least I can turn my Macbook off and leave it that way and the world will not cease to exist. (Or will it?)

    Computer operation 101.
    Get a bootable, external HD (preferably FireWire, since it's 40-50% faster than USB 2 and designed for data transfers), make a bootable backup/clone before updating/upgrading, using something like Carbon Copy Cloner or SuperDuper!, and ensure that it's bootable and works like the original. That allows you to revert to the previous good state without having to reinstall or reset anything. See these for details:
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html
    If you only have a Time Machine backup, ensure that you can reliably restore it to another disk/volume/partition before updating/upgrading.

  • Can't recognize airport via lan and wan cables??

    Trying to add airport extreme to present set up of G4 desktop that presently is hooked up to an external high speed modem.
    Want to hard wire to desktop and use airport extreme for laptop. I'm not simple but do not know much about setting up wireless.
    Here is my presnet set up.
    High speed modem to airport extreme via wan cable.
    Airpirt extreme to g4 mac via lan cable.
    Computer won't recognize airport. can't use setup utility, can't get to internet.
    Trying to locate pppoe message and then mothing.
    Please...any suggestions for someone not very wireless savy
    power mac g4 dual 450   Mac OS X (10.4.1)  

    This has been very helpful.
    I used airport setup asst. for windows and now have configured a secure wireless connection for my dell (dude). I used PPPoe since my internet provider uses it. Can't wait until Feb when I will be getting my power book.
    But I have the problem that the G4 dual 450 desktop will not recognize the aebs when i have connected to it via the lan port. I want to be able to configure it this way so I don't have to put a card in it. Wired to desktop, wireless to laptop.
    Also, it looks like the desktop is only compatible with airport and not airport express. Not sure where could find a card.
    You have been very helpful through this so thank you very much.
    Do you have any last advice?
    Gord
    power mac g4 dual 450 Mac OS X (10.4.1)

  • Bridge cs3 , how can i purge cache manually

    Hi
    i plan to clean the bridge cs3 cache
    i would like to re-install but before make a fresh install
    where does bridge cs3 store cache & other stuff (i can delete)
    thanks

    You would get a better response to Bridge questions by posting in the Bridge Fourm at http://forums.adobe.com/community/bridge/bridge_windows.
    You can purge the cache within Bridge in the edit/preferences/cache window.  Here is also where you set where you want the cache to be.  But if you are going to re-install what is the point, it starts from 0 anyways.

  • I can't access or send email through Thunderbird any longer (over a month) though I have checked settings and can access/send email via webmail and other device

    My cable provider changed (buy out or something) about a year ago but left my email address alone.
    Confirmed with the current carrier that my incoming/outgoing settings are correct and my email address doesn't need to be migrated.
    When I click "Get Mail," nothing happens: no error message. It has been like this for a month.
    I can check webmail, but it doesn't have my older emails or folders. I would love to get back on and spit everything out of Thunderbird. I did an internet search (including this forum) but haven't found anything useful.
    Thanks for any help.

    https://support.mozilla.org/en-US/kb/problems-sending-and-receiving-messages

  • Can't Replace Pages (via drag and drop in Pages panel) in Acrobat 9 Pro

    I'm running OS X 10.5.8, Acrobat Pro 9.1.3, PPC G5 PowerMac.
    I'll have two PDFs open and I'll want to replace certain pages from document A with certain pages from document B.  Rather than using the Replace Pages command from the Document menu, I prefer to visually see what I'm changing.  For this reason I've always preferred the drag and drop method, where one selects a page thumbnail from one document and drops it onto a page thumbnail in another document. This only seems to be a problem in Acrobat 9.  This works fine in Acrobat 7.1.1 and 8.1.6.  Drag and drop will allow one to insert pages but the replacement of pages is not working.  As described in Acrobat Help, under "Replace pages using a page thumbnail," I try to drop the page thumbnail onto the page number as prescribed but the page to be replaced never highlights like it should.  It will only give the insertion highlight between each page, indicating that it is about to insert a page.
    Other macs exhibit the same behavior -- it always works in Acrobat 7 and 8 but not 9.
    Thank you for your assistance.

    I'm using the Windows version of Acrobat Pro 9 and found this thread with the same problem. (Key command to replace on Windows is: Ctrl + Alt).
    Anyway, to answer the how to disable the warning, go to the Acrobat Preferences. In the General category under "Warnings", check the setting "Do not show edit warnings". There should be a similar setting on the Mac version.
    (Now I wish replacing pages didn't require a key command like in previous versions.)

  • Can't import photos via drag-and-drop (only small thumbnail will appear)

    After I drag and drop photos into iPhoto 7.1.3 (even a photo just exported from iPhoto), it shows the import process and creates an untitled event. Once complete, I see a dashed-line box instead of the images.
    http://idisk.mac.com/phildame/Public/Pictures/Skitch/iPhoto-20080308-111415.jpg
    Every time I re-open, it will try and re-import the failed photos, creating a new event each time. I have to tell it not to try recoving.
    Note that in the event view, it's a blank square. If a reduce the thumbnail slider enough the images appear in "Photos" view (as if only the small thumbnails were generated before it crapped out).
    Is anyone else seeing this? I'm not sure what to do.
    Phil

    Phil
    Two issues there:
    Every time I re-open, it will try and re-import the failed photos,...
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    2. As to the blank thumbnails:
    Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    Regards
    TD

  • How can I find characteristic via class and class type

    hi all ,
    i have knew a class and class type , how should i find corresponding characteristic , i mean which table should i access .
    just like cl04 , if you enter class and class type , you should get some characteristics. these characteristics are what i want .
    please guide me .
    best regards
    Kevin

    Use
    INOB Table
    INOB-OBJEK = Material No.
    OBTAB = MARA
    Get CUOBJ and KLART(class type)
    KSSK   Table
    OBJEK = INOB-CUOBJ
    MAFID = 'O'
    KLART = INOB-KLART
    GET CLIENT
    from KLAH with KSSK-CLIENT
    Get class no.
    Call the function module CLAF_CLASSIFICATION_OF_OBJECTS with the following input parameters
    Class            =  
    Class Type     =  
    Object
    Object table
    U get Object Data table , it have ur Characteristic value from AUSP table.

  • I updated my iPhone to the new iOS7 but now can't transfer apps via USB and no wifi

    I cannot seem to update my iphone with new apps even though I've done it before with a USB. I don't have wifi.  Now what?

    What happens when you try to update using an USB connection
    to iTunes on a computer? If there is an error message, what is
    the exact wording? Are you using the latest version of iTunes 11.1.1?

  • Can I add the Play/Pause and Mute functions to image buttons

    A custom skin that was created to wrap around a Captivate
    movie we are creating does not include the playbar, but does have
    both a Play/Pause button and a Mute button, both of which are
    normally located in the playbar. We want to create custom image
    buttons for these actions and assign the Play/Pause and Mute
    funtions to them. Can anyone suggest how we might do this? I
    suspect that the answer lies in creating Javascript that will
    accomplish these funtions. Any suggestions would be appreciated.
    Thanks.
    JazzzAl

    Does anyone know if it's impossible?

Maybe you are looking for