Can we put condition for color in bex query designer

hi all,
can any one guide me how to put a condition for color settings in query designer
for example:
i have a key figure like ANSWERED%.in analyser it should display in red if answered% exceeds 95%.
please help me in this issue.
regards
Vamshi D Krishna.

Hi,
Use Exceptions while designing your Query.
Please go through the link
http://help.sap.com/saphelp_nw04s/helpdata/en/43/21b4cd14cd06f4e10000000a422035/frameset.htm

Similar Messages

% Calculactions in Bex Query Designer

Hi Experts,
Could you please on how can i perform the below % Calculactions in Bex Query Designer.
    Vendor No line item Not = L category =A status =RFQ :for items
Example : I have 8 items for vendorNo 200274 and only 4 as above condition and 5 items as not L(delete)
requament: % RFQ Without Response:
Percentage of Quotation response ={(No. of RFQReponses Received/ No. of RFQ items sent)*100},
                                                               ( 4/5 * 100= 80%)
Percentage RFQ without response= 100 - Percentage of Quotation response
                                                              = 100-80 = 20%
How can i perform the % Calculations in Bex Query Designer.
Vendor
Purchasing document
Indicator: Line Item
Purch. doc. category
Purch. doc. status
Item
Number of Records
category A item L
200274
V-LINE EUROPE EXPORT MARKETING
6000003778
L
A
Not assigned
10
1
20
1
30
1
6000003779
Not assigned
A
Not assigned
40
1
9000000046
Not assigned
A
RFQ
10
1
1
20
1
1
30
1
1
40
1
1
Result
8
4
thank you

Hope you have done some groundwork you have done on this requirement. Have you tried to create New Formula and put the required formula in it to calculate Percentage of Quotation response ?
Your formulas seems to be straight forward.
Keep in Filter: item Not = L category =A status =RFQ
You may start working on it and get back with if you are struck.

I have photoshop cs6 om a pc. My coumper guy took my old c drive and cloned it to a new oneand installed it. now when I go into bridge it won't let me do any editing. I can't put stars or colors on the photos.

I have photoshop cs6 on a pc. My computer guy took my old c drive and cloned it to a new one and installed it. now when I go into bridge it won't let me do any editing. I can't put stars or colors on the photos.

>I am trying to load my new programs onto this laptop
Actually, no you're not. You're trying to load old programs on this computer - programs that are based around the old (dead?) Mac OS 9, not Mac OS X.
The main problem is that Mac OS X no longer comes with Mac OS 9. If you want to run Mac OS 9 applications you can, but you'll need to source a copy of Mac OS 9 and install that before you can. Off hand I don't know of any sources for Mac OS 9.x. Apple no longer sell it. eBay might be an option.
Either that, or just use Mac OS X applications. You'd probably prefer that anyway.
Finally, as an aside, this doesn't really have anything to do with AppleScript, so posting in the appropriate forum might get you better luck.

How to put condition for one date range should not interfear with another ?

hi friends,
how to put condition for one date range should not interfear with another date range.
my data base table has two fields
from date
to date.
when we enter the date range in the data base , new date range means from date and to date should not interfear.
can anybody help me.
thanks &Regards,
Revanth
Edited by: rk.kolisetty on Jul 1, 2010 7:18 PM

Do it the SAP way....
First entry...from is today, to is 99991231.
New dates entered, now we have two rows...:
from is original date to becomes yesterday.
From is today to is 99991231

Can you change the Graphs Colors in BEx Web Analyzer?

Dear All,
I have few queries I have developed via BEx Query Designer which I am opening from BEx Web Analyzer in portals. Unfortunately the colors in the Graphs are not very pleasant. I was wondering if there is a way we can customize the colors which is given by the standard.
I am aware that we can do this is BEx Report Designer. But I would like to do this is BEx Query Designer.
Please help..
Cheers,
Shanka

Hi Shanka,
There is no option as such in BEx Query Designer.
You can manipulate and play with colors only in Report designer or Web Application Designer.
In Bex Query designer, you will find only exceptions which are related to colors but chart colors cannot be manipulated in query designer.
If you are executing the report in workbook, you can change accordingly as it is excel.
Regards,
KK.

How can i maintain conditions for vendor sub-ranges

Hi All,
How can i maintain conditions for vendor sub-ranges. These conditions apply to all materials from vendor's sub-range.
Eg: vendor X has the two subranges R1 & R2. I want to maintain separate conditions for R1 & R2. When ever i created PO with ref to particular subrange that Vendor conditions has to be appeared.
How can i achieve this?
Could u pls suggest?
Thanks & Regards
Anilkumar Dalai

Hi,
First Create a Condition Table with field "Vendor sub-range" in M/03
Then create an Access Sequence using this Condition Table in M/07
Then assign this Access Sequence in the Gross Price Condition Type in M/06
Then assign this Condition type in Calculation Schema in M/08
Then maintain condition record for this condition type in MEK1
And then select the appropriate VSR Code in ME21N and check the Pricing.

Please tell me how can I put Bookmarks for all pages opened in Firefox.There was an option ("bookmark all pages") which vanished.

Please tell me how can I put Bookmarks for all pages opened in Firefox.There was an option ("bookmark all pages") which vanished.

It moved to tab contextual menu :
Right-click on any tab -> Mark all tabs (or something close, my FF is not in english).

How can I put validation for JTextField when gotfocus and lostfocus

Hi,
How can I put validation for JTextField when gotfocus and lostfocus ?
Thanks
Wilson

You add a focusListener to the control you wish to monitor. In the focusLost() handler you do whatever, in the focusGained() handler you do whatever.

Usage of formulas in conditions in BEx Query Designer

Hi guys,
does anybody of you guys know, if it's possible to use the results of formulas in conditions? I tried it, but the result of the query was "No applicable data found", but there are data for the selection.
When I'm defining the condition with the key figure (no restricted or calculated key figure), then the query can be executed.
In my case, I like to define a condition based on a formula result. The value should only be displayed, when the result is greater than 30.
Any ideas or are there any bugy in the BEx Query Designer?
Thanks a lot + best regards,
Clemens

Hi Clemens,
I have created a condition in my own system based on formula and it works perfectly fine. Please check following points in your condition change mode,
1) Condition is marked as Active.
2) In the block "Evaluate condition below for" you will have to select "All characteristics in drilldown Independently". If you have selected combination of characteristics then you will have to maintain proper sequence otherwise your condition will not work.
3) In the next block when you set the condition, click on new, in the first block select your Formula from dropdown and set the proper operator in your case you will have to select "Greater than" in the next column set the value of key figure and just trasnfer it.
Now you are ready to use the condition.
Regards,
Durgesh.

Condition (Defintion) in BEX Query Designer

Hi Experts,
I am trying to define a condition in BEX Query Designer.
I defined my condition and bit confused with Characterstic Assignment
What Happens if is select 9What is the difference)
1) All Characterstic in the Drilldown Independtly
2)Most Detailed Characterstic Along the Rows
3)Most Detailed Characterstic Along Columns and
4)Individual Chars and Chars.Combinations
Thanks

Hi,
● All Characteristics in the Drilldown Independently
This setting allows you to apply a condition in a general way. Depending on which characteristics you use in the drilldown, you obtain different results.
Note that the characteristics that are already used in an active condition for characteristic combinations are not included.
This option is optimized for ranked list conditions, but can also be used for threshold value conditions with relative values.
●Most Detailed Characteristic Along the Rows or Columns
This option is optimized for threshold value conditions. The condition is applied to the most detailed characteristic of the rows or columns.
Note that this function is not supported when executing the query in the BEx Analyzer. For more information, see Restrictions in the BEx Analyzer.
● Single Characteristics and Characteristic Combinations
This setting allows you to evaluate the condition for characteristics or characteristic combinations defined for specific drilldowns only. You can select any characteristic (of the characteristics used in the query in rows, columns, or in the free characteristics) or a characteristic combination.
○ If you only want to evaluate the condition when a certain characteristic is present in the drilldown, select this characteristic.
○ If you want to evaluate the condition for characteristic combinations, select multiple characteristics.
Source:
help.sap.com
For more information and examples please check the following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/73/702e39074dc93de10000000a114084/frameset.htm
Hope it helps.

IF and ABS condition statement in BEX query designer

Hi,
I would like to ask the best way for me to produce an acceptable result from Excel IF and ABS Condition statement.
The condition statement that I have on my Excel file is
=IF((A2-B2)>0,ABS(A2-B2),0)
I'm trying multiple times to reproduce this in BEX Query designer, unfortunately I'm getting a bad result or unacceptable formula.
Anyone who could help me with my issue?
Thanks,
Arnold

Hi Arnold,
Thank you,
Nanda

Creating Restrictions in BEx query designer for (1-a), where a is variable.

Dear All,
>> Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears. In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
I'm using SAP BI 7.2 gui.
Expecting your reply soon,
with Regards,
Jerald

My requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1".
So there would be some other way to define "1-fiscalyear". So Please help me to define "1-fiscalyear" by giving me the steps.
Thank you,
with Regards,
Jerald

How to find out which connection is used for access to Bex query?

Hello,
in our BO 4.0 environment we have a lot of different connections to Bex queries.
There exist more connections to one Bex query.
For example to Bexquery1 we can access with 2 connections, connection : BX1 (connection specific for one query) and connection DEVcubes(generic connection to all cubes)
How can I check in Webi report over Bex query which connection is currently used?
Thanks a lot !
Rudolf

Hi Rudolf,
Your requirement can be achieved using QueryBuilder.
Please refer to following QueryBuilder step-by-step post by Manikandan:
http://scn.sap.com/community/bi-platform/blog/2012/10/11/businessobjects-query-builder-queries
In bove post, Go to Universe Queries section -> All webi report using one connection
In case you dont know how to use QueryBuilder, please refer to following post:
http://scn.sap.com/docs/DOC-42952
Please let us know if you get any doubt.

How to find the objects that are used for a particular BEx query

Hi ,
I am preparing the inventory for BEx queries. Means for a particular BEx query I want to know the correcsponding
1. Selection screen variables
2. Characteristics
3. Restrcited, Calculated and normal key figures.
I have checked all the BEx query related tabe but unable to find the proper relation between these tables to get the desired output.
Can you help for table joins to get the output as mentioned above.
Thanks in advance.
Regards,
Sai

Hi,
you want find the total information about query details use the T CODE - RSRTQ.
give the proper selection then execute.
please find the doc.
RSRTQ – Query Definition – Multipurpose T-Code on BEx Queries
Thanks,
Phani.

Settings for SAP Portal start page from BEx Query Designer

Hi!
In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
Question:
What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
Thank you very much!
regards
Jürgen

Hi Anton?
Many thanks for your reply.
But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
Do you speak Russian? Me too
Can you also help me with the following problem?
Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
- the status is getting u201Cyellowu201D (194 from 0 records)
- at the next day the status is getting u201Credu201D and I received the following error:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Comment:
I did not find any entries on "Environment -> Transact. RFC -> In source system"
The Source system connection EC6CLNT100 is OK
Can some one help me to solve this problem?
Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

Can we put condition for color in bex query designer

Similar Messages

Maybe you are looking for