Can we put two tables horizontally in a PDF document?

Hi All,
I have 2 questions regarding PDF document.
1) When I have a table data which rolls over more than one page, it is not properly displayed. The first row of the table is repeated in every page. So there is a problem when a table splits over two pages.
2) Is there any way to put two tables one beside the other horizontally. I have more than 30 tables which has 4 columns and say 6-8 rows. Its taking more no. of pages. If two tables are put side by side, the no. of pages will be reduced.
Please provide your ideas, if any, on this.
Thanks,
Manisha

Not possible in the current release of xMII (using PDF).
It would be possible if you created your report as an HTML page, however.
You can use BLS to write to the file and/or append to a string that builds up your HTML content.  You can easily create callable "sub transactions" that take an xMII recordset and convert it to an HTML table, so that you can have reusable pieces (and simpler transactions to build the reports).

Similar Messages

  • Can I put two iMac's back to back on the same desk.   I noticed the computers feeling hot.

    Can I put two iMac computers back to back on the same desk - I share a table with my husband and our computers have to be placed back to back.   I noticed the tops of the computers feel hot!  

    There should definitely be a little space between them to allow for ventilation, but it's normal for the top area to get hot.
    Matt

  • How can i put below  table into internalt table

    how can i put below  table into internalt table and want to add both internal table into 3rd internal table.
    SELECT  * FROM J_1IEXCHDR  WHERE STATUS = 'P'.
    WRITE: / J_1IEXCHDR-LIFNR,
              J_1IEXCHDR-DOCNO,
              J_1IEXCHDR-EXYEAR,
              J_1IEXCHDR-BUDAT.
    SELECT * FROM J_1IEXCDTL  WHERE TRNTYP = J_1IEXCHDR-TRNTYP
                              AND DOCYR  = J_1IEXCHDR-DOCYR
                              AND DOCNO  = J_1IEXCHDR-DOCNO.
       WRITE: / J_1IEXCDTL-EXBAS,
                J_1IEXCDTL-EXBED,
                J_1IEXCDTL-RDOC1,
                J_1IEXCDTL-ECS.
    ENDSELECT.
    ENDSELECT.
    please help
    thanks in adavaced.

    hi laxman,
    use for all entries and get the required data.
    SELECT * FROM J_1IEXCHDR into table itab1 WHERE STATUS = 'P'.
    if not itab1[] is initial.
    SELECT * FROM J_1IEXCDTL into table itab2 for all entries in itab1 WHERE TRNTYP = itab1-TRNTYP
    AND DOCYR = itab1-DOCYR
    AND DOCNO = itab1-DOCNO.
    endif.
    so itab2 will have the common records...This will solve ur problem..
    also u can do other method declare an final internal table with the common fields of the two internal table.
    then after getting data in itab1 and itab2.
    loop at itab1.
    move-corresponding itab1 to itab3.
    read table itab2 with key <give the fields> = ......
    if sy-subrc eq 0.
    move-corresponding itab2 to itab3.
    endif.
    append itab3.
    endloop.
    Regards,
    nagaraj

  • Can i put two ipods on one itunes

    can i put two ipods on one itunes

    The OP didn't ask how.  They only asked if it was possible, which would consist of either a yes or no answer, which is exactly what Niel provided. 
    If the OP wanted more information, they will respond asking for more information.
    B-rock

  • In ER DIagram using toad( how can i link two tables)

    Hi,
    Any Toad expert can guide me that how can i link two tables in Toad in ER Diagram to show the relationship between two tables.
    Thanks

    Hi,
    I hope there is foreign key relationship in tables, if so then you can click on "Find table dependencies" icon which will draw lines between them.
    ~Vinod

  • Can I put two GT120's in a Mac Pro?

    I just put a ATI 4870 in my Mac Pro and I took out the standard GT120. My father has a Mac Pro as well and I thought about putting the card to use by installing it in his Mac Pro.
    Both our Mac Pros are the most recent version. Only difference is that his is 4 core and mine is 8.
    So can I do this? Can I put two GT120's in his Mac Pro, and would it even make a difference for him. He mainly uses Aperture 2, and Office apps.

    Two cards only allow more displays to be connected.
    Rendering for all displays is still done with only the primary card.
    The information is then passed along the PCIe bus to the additional cards.
    What additional cards actually do is to increase bandwidth loading of the PCIe bus, which can result in a net decrease in performance.
    Some applications are not multi card aware, and can result in negative performance.
    One example is the case of two identical cards and FCP:
    http://www.dvinfo.net/forum/non-linear-editing-mac/145449-dual-graphics-cards-ma c-pro-final-cut-pro.html
    Note that the "solution", that is to use two different cards, is a result of the fact that rendering occurs on only one card.

  • How to put a check mark in a PDF document, if using an iPad 2

    How to put an check mark in a PDF document, if using an iPad 2?

    You need to implement below logic:
    1. check if field_date = sy-datum. in this case do nothing.
    2. else . move sy-datum to field_date .
    3. modify your internal table with field_date .
    4. populate final table to database table .
    hope you get it.

  • "Can I select only one page from a PDF document to convert to an excel doc. ?"

    "Can I select only one page from a PDF document to convert to an excel doc. ?"

    No, so extract one page, then convert.

  • Can I set up safari to automatically open PDF documents in the pages app?

    Can I set up safari to automatically open PDF documents from the internet into the pages app?

    No - and you can't open pdf files in the Pages app on the iPad anyway as far as I know. You can export a Pages file as a pdf but you can't open them in Pages.

  • After installing two updates, I cannon create .pdf documents as the window says "Missing PDF Maker Files."  I've uninstalled Acrobat and re-installed twice, same problem

    After installing two updates, I cannon create .pdf documents as the window says "Missing PDF Maker Files."  I've uninstalled Acrobat and re-installed twice, same problem.  How do I correct problem?

    Thank you.   I googled my problem and got good answers involving making changes to my Office settings - which worked. 
    Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone

  • Can I use Adobe ExportPDF to split a PDF document?

    Can I use Adobe ExportPDF to split a PDF document?

    Hi
    We don't have this functionality but I will forward your request to our product team
    You might want to try Acrobat XI, trial is available at http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=us
    Thanks
    -sarabjit

  • How can I put two photos in one 6x4 print??

    Hello!! So I want to print out some of my photos for a scrapbook.
    I however do not want them all to be 6x4 sized prints and making smaller ones (scrapbook prints) at the photo shops cost too much.
    There HAS to be a way to just put two separate photos into one photo jpeg type file right? That way I can print them out normally and just cut them in half so some are smaller?
    Any help?
    Much appreciated!

    Your question is not clear
    do you want to
    1 - put two separate photos into one photo jpeg type file
    Or do you want to print two photos on one sheet of paper so you can
    2 - can print them out normally and just cut them in half so some are smaller
    For 1 you need an external editor - you can do it in pages for example
    for 2 you simply select the two photos, crop them so they will fit and print selecting the printer, paper size and print size (slightly smaller than 3x4 since there needs to be a small border around them and between them), if the priview does not show two photos on the page click customize and in setting select multiple photos per page - the preview will reflect this selection and finish printing
    LN

  • Can I put two h:dataTable in one page?

    I find that if I put two dataTables in the same page, something goes wrong.
    Any solution to this?
    Thanks in advance.

    userManagement.jsp:
    <%@ page language="java" pageEncoding="GBK"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
    <html>
    <head>
         <title>My JSF 'userManagement.jsp' starting page</title>
         <meta http-equiv="pragma" content="no-cache">
         <meta http-equiv="cache-control" content="no-cache">
         <meta http-equiv="expires" content="0">   
         <meta http-equiv="keywords" content="keyword1,keyword2,keyword3">
         <meta http-equiv="description" content="This is my page">
         <!--
         <link rel="stylesheet" type="text/css" href="styles.css">
         -->
    </head>
    <body>
         <f:view>
              <f:loadBundle basename="edu.fudan.glee.view.bundle.MessageBundle" var="bundle"/>
              <%@ include file="header.jsp" %>
              <%@ include file="demandHistory.jsp" %>
              <%@ include file="rootCatalogLink.jsp" %>     
                   <p>  </p>
                   <TABLE border="1" width="400px">
                        <TR>
                             <TD>
                                  <h:outputLink value="/Glee/userManagement_favorite.faces" rendered="true" id="favoriteLink">
                                       <h:outputText value="#{bundle.favoriteLink}"></h:outputText>
                                   </h:outputLink>
                             </TD>
                             <TD><h:outputLink value="/Glee/userManagement_personal.faces" rendered="true" id="personalLink">
                                       <h:outputText value="#{bundle.personalLink}"></h:outputText>
                                   </h:outputLink>
                             </TD>
                             <TD><h:outputLink value="/Glee/userManagement_comment.faces" rendered="true" id="commentLink">
                                       <h:outputText value="#{bundle.commentLink}"></h:outputText>
                                   </h:outputLink>
                             </TD>
                        </TR>
                   </TABLE>
                   <%@ include file="footer.jsp" %>
              </f:view>
    </body>
    </html>demandHistory.jsp:
    <%@ page language="java" pageEncoding="GBK"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
         <f:subview id="demandHistorySubView"> 
              <h:form id="demandHistoryForm" rendered="true">
                        <h:dataTable id="demandHistoryTable" var="video" value="#{UserBean.demandHistory}" border="1">
                         <h:column>
                              <f:facet name="header">Recent</f:facet>
                             <h:commandLink action="videoDetail">
                                            <h:outputText value="#{video.chineseName}"/>
                                            <f:param name="videoId" value="#{video.id}"/>
                             </h:commandLink>
                         </h:column>
                         </h:dataTable>
              </h:form>
         </f:subview>rootCatalogLink.jsp:
    <%@ page language="java" pageEncoding="GBK"%>
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
         <f:subview id="rootCatalogLinkView">
              <h:form id="rootCatalogLinkForm">
                   <h:dataTable id="rootCatalogTable" var="videoType" value="#{VideoListBean.rootCatalog}" border="1">
                         <h:column>
                              <f:facet name="header">Video Catalog</f:facet>
                             <h:commandLink action="rootCatalog">
                                            <h:outputText value="#{videoType.name}"/>
                                            <f:param name="videoTypeId" value="#{videoType.id}"/>
                             </h:commandLink>
                         </h:column>
                   </h:dataTable>
              </h:form>
         </f:subview>The problem is dataTable in rootCatalogLink.jsp doesn't work.The commandLink in rootCatalogLink.jsp doesn't work. When I click the hyperLink, no action performed.
    If the change the include sequence to:
    <%@ include file="rootCatalogLink.jsp" %>
    <%@ include file="demandHistory.jsp" %>
    well, the commandLink in demandHistory.jsp doesn't.
    What's the problem?
    Thank you
    Message was edited by:
    zhlmmc
    Message was edited by:
    zhlmmc

  • How can I put two triggers on top of eachother, and have them both work when clicked?

    I'm creating this slideshow, with before and afters of my work. At the bottom right corner, I want a small frame with the before image. The fullscreen slideshow though, has arrow buttons working as triggers to either go back in the slideshow or move onto the next image. I want the other smaller slideshow at the bottom right corner to sync up with the corresponding "Before" images in the fullscreen slideshow. So, my idea was get both of the forward/back arrow buttons from the widgets and put them on top of eachother, assuming it would advance or go back on both of the widgets.  It's not working though, only the top-most trigger works.
    Simplified version without the mumbo-jumbo!:
    I want to put two triggers on top of eachother, but when I do this, only the top-most trigger functions. Any way to get this to work? or creative ways to get around this?
    Thanks in advance!

    You can't have it click on two things at once. You would have to write some javascript to have one button do both actions. This would not be very easy in Muse so I would say this is not somethingthat is supported in Muse.

  • Can we use two table in on report

    HI
    how to use two different table views in one report.
    Regards
    Birudu

    g_p_java wrote:
    Hello, i would like to ask sthg related to JDBC. I know that we can delete, select, insert, update using JDBC.
    But can we create a table?
    For example, i may have an html page where sm has the choice to "create a new category for a product", that means that he has to create a new table in the database and he has to insert in a form the characteristics, let's say that he gives the following arguments
    Why does that require a new table at all?
    A meta data solution is probably better.
    Can we do that using JDBC or shall we do it manually? Yes. The syntax can be database and version specific however. And the specifics of how you do that also depend on those.

Maybe you are looking for