Can we restart the sequence at any moment without  define max val

Hi all
can we restart the sequence without define the max value
i am creating batch for month and in every month i never know how much batches i have i want when the month change then batch restart
thanks and regards
vikas singhal

Hi,
Refer to : http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1119633817597
http://www.jaredstill.com/content/reset-sequence.html
- Pavan Kumar N

Similar Messages

  • The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

    The volume on my iPad 3 has gone. I've checked the mute button, tried restarting, resetting etc and nothing has changed. I can't hear the music, hear any sound from videos. Most times the video stops playing after a seconds. My iPad 3 is only 2 months ol.

    If you have lost all sound and video is freezing on you, that ain't good. Your iPad is two months old so I would not hesitate to contact Apple at all. You are entitled to 90 days of phone support.
    http://www.apple.com/support/ipad/contact/.
    If you want to try a couple of things on your own, try quitting all apps and then reboot the iPad - not so much for the sound issue itself - but more as a general "start all over again" sort of approach. It might help with the video freezes.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If you use headphones on occasion, you can try plugging and unplugging those as well and see if the sound comes back.
    You could even try restoring the iPad to factory settings and then restore from a backup, but unless there is something totally hosed on the iPad, that should not be necessary with a two month old device - of course assuming that you didn't drop the iPad or do something accidental that could be causing the problems.

  • When I open the settings and messages of the iPhone 4s I get stuck in a white screen, what should I do? the keyboard to open there is minute, I can not open the settings in any way.

    when I open the settings and messages of the iPhone 4s I get stuck in a white screen, what should I do? the keyboard to open there is minute, I can not open the settings in any way.

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

  • Hi my iMac has decided to come up for the 5 time Work the ?  Symbol just tris time everytime i try to restart the iMac with any key it won't work, then I try also i knserted the installation dvd and it does not, If media is getting scratched in the drive

    Hi my iMac has decided to come up for the 5 time With the ?question mark   Symbol just this time when i try to restart the iMac with any key it won't work, then I try also to insert the installation dvd and stard with yhe C or D key
    Still no way to grt it starting, also I notice the DVD drive is getting scratched in the drive just before it outomaticly ejected.
    media is getting scratched after been used and ejected by my iMac without loading .
    Please help!!! I  to finish my college work and have no way of  work on it! HELP
    Thanks

    Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some models have a separate AHT CD. Some have it on the Disc #2.
    The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
    Memtest OS X...
    http://www.memtestosx.org/joomla/index.php
    Rember is a freeware GUI for the memtest ...
    http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html

  • How can i change the sequence of text element in standard driver program ?

    Hi,
    can u tell me how can i change the sequence of text element in standard  sapscript driver program.. without making a zcopy of standard driver program.
    My problem is when MEDRUCK form is getting printed for PO print , header text is coming before item. But the requirement is to come it after item.So how cani do that without making the zcopy of  SAPLMEDRUCK program..Is there any enhancement point in SAPLMEDRUCK driver program..where i can put my customise code for changing the sequence of text element ?

    Hi,
        Just copy the MEDRUCK to ZMEDRUCK. No need to copy the driver program.
    1) SE71Menu > Utilities > COpy from Client
    MEDRUCK ->>Client 000
    New formname ZMEDRUCK
    2) Now open the ZMEDRUCK in DE language in SE71
    3) Menu > Utilities > Convert original Language
    Change DE  to EN, save and activate
    4) Now open the ZMEDRUCK in EN language
    5) Goto Pagewindows > Main window,
    Look for the HEADER text Text element, copy the whole code under this Text element just after the ITEM text Text element, and comment the HEADER text above.
    Now the Header text Text element will be below ITEM text only. This will full fill your requirment.
    Now goto NACE transaction and add the copied ZMEDRUCK to the EF application.
    Regards
    Bala Krishna

  • Can I make the tool icons any larger in PS CC 2014?

    Can I make the tool icons any larger in PS CC 2014?  The icons are tiny.
    Thanks!

    Yes indeed, and Photoshop CC 2014 is the only version with that option.
    In Photoshop: Edit > Preferences > Experimental Features > check "Scale UI 200%", click OK, Restart Photoshop. (Windows only).

  • Finder Crashing, Can Not Restart, The World is Blowing Up

    I'm at a loss here. My computer, even after a clean install is simply not behaving well. For example:
    1. I can't restart the computer. When I choose restart, the dock and menu bar go away and then I get stuck at the desktop picture. The spinning lines just spin and spin and spin and it won't restart.
    2. I can't shut down the computer, the exact same thing happens.
    3. Every time I start up, Spotlight has to index every drive connected to my computer. Every time.
    4. Finder crashes about once a day and crashes so hard sometimes that I have to hard restart.
    5. Most applications are completely unstable and crash often.
    The steps I've taken to remedy the situation:
    1. Reinstalled the full 10.5.1 updater
    2. Zapped the PRAM
    3. Booted from the Leopard disk and repaired permissions
    4. Single-user mode to run fsck
    5. Disconnected everything but my keyboard and mouse and I still couldn't restart
    6. Removed any applications that might not be playing well with Leopard (i.e. not specifically noted that it works with Leopard)
    I'm using the in-the-box keyboard and mouse for my iMac. I've never added any after-market things to my iMac like a new hard drive or RAM. Everything in the machine is the stuff that came with the machine. I do have a 500GB FW400 and a 2TB FW800 hooked up. I also have an HP printer, Sony Cyber-shot, iPhone dock, and USB hub connected to my iMac.
    Are there any tests I can run that might help me identify the problem? I'm not looking forward to lugging this to an Apple Store only to have it taken away for a couple of weeks while they try and figure out what's wrong.

    Hi
    You could try reinstalling a clean OS and not preserve network users and settings. Repair the disk beforehand. If your mac is stable the whole time the installer is doing this odds are its not your mac that is the problem.
    However assuming you may have a hardware fault
    Switch your mac off and turn it up on its end, use a cross-head screwdriver to remove the one retaining screw that allows you access to the RAM slots, touch something metallic to ground yourself and remove both sticks of RAM. Now place the mac right way up insert the power cord and depress the power on button. You should see the boot light flash regularly as well as hearing a single monotone beep. Depress the power on button again to power off the mac, remove the power cord, turn the mac over and re-insert one of the RAM modules in the rightmost slot. Make sure it is seated correctly and in place. Be firm when installing RAM but don't be too rough. Turn the mac rightway round again, insert the power cable and see if it boots normally. If still no joy repeat the instructions until you have tried both RAM modules singularly in each RAM slot. If at the end of all this your mac is still playing up, take it to your nearest Apple Authorized Repair Specialist.
    Hope this helps, Tony

  • Acrobat Pro for Mac won't start, even after restarting the machine.  Any suggestions?

    Acrobat Pro for Mac won't start, even after restarting the machine.  Any suggestions?

    Hi Patrick,
    Can you please mention the version of Adobe Acrobat that you are using and on what OS version. Also mention whether this problem has started recently and was running fine earlier or is it a fresh install and has never worked for you.
    Have you tried uninstalling and reinstalling the product after you started facing this issue.
    -Shashi

  • I can not play the sequence in preview mode. How do I fix this issue?

    Each frame loads in the preview window when highlighted, but I can not play the sequence.

    I am working on a project for school. I have been draging clips down to the timeline and matching it with a few voice overs. Nothing too complex. I have been previewing my work as I go by pressing the space bar, Im not sure what I did but now Premiere will not play the preview in the Program sequence window.

  • I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

    I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

    As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
    https://discussions.apple.com/community/appletv/appletv

  • I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

    I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

  • How can I delete the photos in Collections/moments?

    How can I delete the photos in Collections/moments? I have set icloud photo settings to none, and delete all my photos in album, but I'm still getting 5.6 G of photos!

    help!

  • HT201263 When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds.  While in auto-lock it is using battery power and will do so until the battery is drained.  Whats wrong

    When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds.  While in auto-lock it is using battery power and will do so until the battery is drained.  Whats wrong?

    - Try a reset. Nothing is lost:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
    - If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
    - If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

  • We have a DVD in the super drive that will not eject.  The DVD does not show up on the desktop.  Have tried the keyboard eject button, and also restarting the computer.  Any ideas on how to eject it?

    We have a DVD in the super drive on our Macbook Pro that will not eject.  The DVD does not show up on the desktop.  Have tried the keyboard eject button, and also restarting the computer.  Any ideas on how to eject it?

    here is a troubleshooting article from Apple about this: http://support.apple.com/kb/ht2801.  Hope this helps

  • HT201413 Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Did you try removing and reinstalling all the Apple software using:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Maybe you are looking for