Can we restrict a master data characterstic using another master data chara

Hi All,
Can we restrict a master data characterstic using another master data characterstic, if they were both compounded together. There are two fields viz.., A,B  in r/3 master data table in which A and B combinely serve as a key. In BW side i have created a master data object for A and compuded object B ot it. So that i am getting all the data from r/3 table. But in query designer when i am trying to restrict object A values by object B, in a structure i am not getting any data. If i do same out of structure i am getting data in report. Please help in overcoming this problem.
Regards,
Rajkandula

Hi,
Yes it should display data, but it is not displaying. If i am doing the same restriction out side of a structure i am getting data. But whilr trying to do so, i am not getting that. The reason why i am bothering about structure is 'Objext B have 10 different values and i want 10 coloumns in report in whicg Obj A must display respective data when i restrict it by B' , whicg i can do this only if i use structure else i can't restrict B that many times .
I hope u got my problem and plz give help me in this.
Regards,
Rajkandula

Similar Messages

  • How can we restrict Column length in ALV using POWL.

    Hello,
    I have a new assignment o ABAP Web Dynpro, data displaying ALV by using POWL is a part of that assignment. Everything went fine and at last moment I was stuck with a small issue. In my application I am displaying first ALV by using POWL concept and on the basis of selected row I am displaying second level LAV by using normal ALV procedure (SALV_WD_TABLE). Here the issue is as soon as second ALV is displaying columns in first level ALV are getting expanded. How can I restrict Column length in first level ALV using POWL. I browsed a lot for getting the solution for this, Can any one help me out from this issue.
    Regards,
    Kumar

    Done, in field catalog method...

  • How can I reset my new iPad to use another apple id

    I just got an iPad.  I signed up and got an I'd.  However, I want to reset it to our original apple I'd so we can tie our iPhone to it

    Settings/Store
    Note that this will apply only to new purchases.
    ALL purchases are permanently associated with whatever Apple ID was used to originally obtain them.  Apps can not be updated without knowledge of that ID and, more importantly, its password.
    Apple IDs can not be merged and purchases can not be transferred from one ID to another.

  • Creating a Date object using an existing date object of different format

    I am stuck in a problem while converting the date formats:
    I have a date object in the format "yyyy-MM-dd" (e.g., 2009-08-21). And i want to create a date object in the format "MM/dd/yyyy" (e.g., 08/21/2009)
        String s = oldDate.toString(); SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yyyy"); Date newDate = formatter.parse(s);
    the above code gives parse Exception:
        java.text.ParseException: Unparseable date: "2009-08-21"
    Any Clues ?
    Edited by: Rahul.Mittal on Aug 21, 2009 10:09 AM
    Edited by: Rahul.Mittal on Aug 21, 2009 10:12 AM

    my apologies for putting it into a wrong forum. Anyways thanks for the pointer.
    But i still feel that if i somehow get the desired Date object i can get through the problem. Something like this:
         public Date getdOJ() {
              Date oldDate = this.dOJ;
              SimpleDateFormat oldFormatter = new SimpleDateFormat("yyyy-mm-dd");
              Date newDate;
              try {
                               String s = oldDate.toString();
                               SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yyyy");
                               Date newDate = formatter.parse(s);
              } catch (ParseException e) {
                   e.printStackTrace();
              return newDate;
         }Unfortunately i am getting java.text.ParseException

  • Can you be on a call and use the internet/data with 4g LTE?

    I am not currently in a 4g area so I can't test this out and answer my own question.  But with the LTE network can we be on a call and do other things now?

    Yes, but only in a 4G area. Both the 4G and the CDMA radio are used, each for a different function; CDMA for voice, 4G for data.

  • How can i get the videos i recorded in my ipod without losing all it's data(im using another computer)

    I RECENTLY BOUGHT A NEW COMPUTER BECAUSE MY OLD ONE BROKE AND ALL ITS CONTENT GOT WIPE OUT..NOW MY PROBLEM IS I CANT CONNECT MY IPOD TOUCH TO MY COMPUTER CAUSE IM AFFRAID THAT ITUNES MIGHT WIPE OUT ALL MY APPS AND MUSIC. BUT I HAVE IMPORTANT VIDEOS THERE THAT I REALLY NEED TO TRANSFER TO MY COMPUTER..HELP PLEASEEEEEEEEEEEEE.THANKS!♥♥♥

    - Authorize the computer for the account used on the iPod. Then connect the iPod to the computer and transfer iTunes purchases to the new computer:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like one of thos discussed here.
    Best iPod to PC
    - Make a backup of the iPod by right clicking on the iPod under Devices in iTunes and select Backup. The backup will contain all the photos and video that were taken by the iPod that are still on the iPod.
    - Retore the iPod from that backup. 

  • How can I transfer data form one data store to another iview /dats store

    Hello,
    I have two iview and want to transfer the data from my data store (main iview) to the nested iview (or the data store in nested iview)
    Can you give me instructions, how I can implement this with the signal in and outports.
    Thanks
    Bst regards
    thomas
    I

    Hi Thomas
    Pass the output data of one iview to another(by connecting the output of the 1st to the input of the 2nd) and then <b>Signal Out</b> the combined data of the two iviews from the 2nd iView using a <b>event</b>(say, a submit button) from the 2nd iView.
    Connect the <b>signal out</b> to the nested iView(main iView) by composing a <b>Signal In</b> on the nested iView.
    Next, inside the nested iView design layout push the values from <b>Signal In to a data store.</b>
    Now you could access all the data @datastore from any no. of forms inside the nested iViews.
    Regards
    Navneet

  • Loading data from one master data attr.to another master data in production

    Hi all,
    I have two two masterdata attr info objects A and B( have time dependent attr.).
    according to businees requirement i have included 8 objects of A TO B to make them as time dependent.
    all reports are designed on infosets only having these A and B ,some other ods objects.
    I have done mapping in infosets and made changes in queries according to changes.i when moved from dev to quality and checked all infosets and queries all changes are reflecting in infosets  and queries in quality.
    *QUETIONS * :
    1. while executing queries i am getting 'no data' in the reult of query output.
    2. How can get 8 fields data from A to B, because A has lot of data for that 8 fields in A in production
    Regards,
    Chinna.

    Hi chinna
    first of all maintain the master data to attributes and these attribute converted into Navigational Attributes
    in this way u can get master data at query output
    thanks
    Muralidhar Reddy.P
    Edited by: Muralidhar Reddy P on Dec 24, 2008 9:31 PM

  • Data Binding using XML as data connection

    I'm using an XML as my data connection. It has several order fields in various sections that have unique field identifiers. I have created a random order # script that runs fine inside of the form that occurs on the first order number field but I need that same number to populate into each of the additional order fields, again that have unique identifiers. Is there a way to combine data fields?
    Thanks!

    usually you can make the binding global and all same named fields will end up with the same value. You may not be able to do that if you have bound your field to a data node in your XML. If that is the case then you will have to do it programatically. Lets assume you have Order_Number on Page 1 and Order_Number2 on Page 2. You would code on the calculate event of the 1st Order_Number field (the one where the number is calculated) - form1.Page2.Order_Number2.rawValue = form1.Page1.Order_Number.rawValue;
    You can add multiple statements to equate that value to other instances of the field as you see fit. Now when any one of those values changes all of the others will be updated auto-magically!

  • Data Load using only 1 data package

    Hi,
    I am moving data from one cube to another manually using an infopackage. This system has recently been upgraded from 3.0 to 3.5.
    It is only using 1 datapackage (I am loading 19m records) and have done this successfully before and it used 4 datapackages.
    Settings in SBIW show that MAXPROC for myself system is set to 4. Entries in ROOSPRMS show MAXPROC as being 1.
    With these settings in the failover system (3.0B), it uses 3 datapackages. With these settings in teh production system (3.5), it uses 1 datapackage.
    Does anyone have any ideas as to how to get it to use 4 datapackages ?
    regards
    Sue

    Check Default Datasource data transefer in the scheduler menu item in the Infopacakge; here you can find max number of records and max size of datapackage.
    Hope it helps.
    Regards

  • Master Data Atrribute of another Master Data

    Hello Gurus,
    I have the below scenario.
    Master Data with Text ZMDATA1 with Attributes ZMATTR1 and ZMATTR2.
    Master Data With Text ZMDATA2 with Attributes ZMDATA1 and ZMATTR3.
    when I load Master data to ZMDATA2, will it automatically update ZMDATA1 Master Data as well or not.
    Could you please explain more about this scenario.
    Thanks,
    Aarthi

    Hi all,
    Thank you so much for your replies.
    Sarma:
    I found that when data is loaded to ZMDATA2, it is not even creating an SID for ZMDATA1.
    so, are they completely independent ? Is there any way to update the Master Data ZMDATA1 automatically when new values come across while loading data to ZMDATA2.
    Does any one have good documentation on this topic ?
    Thanks,
    Aarhti

  • How can you make an smart playlist that uses another smart playlist when I can't see them all

    My whole family uses itunes.  I want to make a playlist that uses other playlist.  However, when I start a smart playlist and click playlist is I get a dropdown menue that doesn't show all my playlists.  My wife's name happens to start with a V so all of hers are at the bottom and don't show up.

    Once the list of playlists is on your screen you can use the Page Down/Page Up and Arrow Down/Arrow Up keys to access values that aren't shown.
    tt2

  • How can I update apps that were installed using another Apple ID

    I have an ipad that was set up by my school. I use my own apple ID however it came preinstalled with Pages, Keynote and Numbers. However according to my app store these apps need to be updated. I press update and insted of asking me for MY apple ID, it asks for the schools.
    Is there a way of updating this app with out needing to schools apple ID password. The guy that created it has since left and no-one knows what he set the password to.
    Thanks

    Delete and redownload them.
    (106884)

  • Can i listen to i tunes and use another app at the same time on ipad 4 ?

    I've been trying to figure out how to listen i tunes, or listen to music on a web music site, and play a game at the same time, is that possible to do on an iPad 4 ?

    I can listen to Tunein Radio and play Coin Dozer and Burst Bubble at the same time.
    I can also play music on iTune an play Coin Doser and Bubble Burst at the same Time.

  • I cannot see graphics in my newsletter site on my laptop /c FF but can see them w IE or when using another computer. What could be blocking this?

    When I view emails sent from my newsletter account to myself and view in browser, there are no graphics either. Mailchimp has checked and no problems with Firefox from a development perspective.
    I have rechecked settings and graphics are allowed. pop ups are allowed etc. but still no luck. Other newsletters sent to me are ok. It's just mine. Any help is appreciated.

    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    *A way to see which images are blocked is to click the favicon ([[Site Identity Button]]) on the left end of the location bar.
    *A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
    *Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    *Select the first image link and scroll down though the list with the Down arrow key.
    *If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    There are other things that need attention:
    Your above posted system details show multiple Java Console extensions.<br />
    You can uninstall (remove) the Java Console extensions and disable the Java Quick Starter extension, you do not need them to run Java applets.
    See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
    Disable the Java Quick Starter extension: Tools -> Add-ons -> Extensions<br />
    * Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)
    See http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0

Maybe you are looking for