Can we restrict the data to be entered in payroll area

Can we restrict the data to be entered in payroll area?

Hi,
In my lilmited knowledge I think we can only default the payroll area using ABKRS feature.
We probably have to use a user exit of BADI to restrict it.
cheers
Ajay

Similar Messages

How can we restrict the date range in the date picker

While selecting any date a pop up date picker appears. In this date picker the users can select any future dates which can be 30-40 yrs ahead. How can customize this date picker so that the users are not allowed to slected date beyond certain range. ...??

Hi user570596,
I think there is no method to actually restrict the date picker popup, but you can use the ApexLib Framework (http://apexlib.sourceforge.net/) to define a min/max value for your date field. This will prevent the user from submitting the page when the date value is outside the defined range.
See http://inside-apex.blogspot.com/2007/03/min-max-value-validation-in-browser.html
for details.
Patrick
Check out my APEX-blog: http://inside-apex.blogspot.com
Check out the ApexLib Framework: http://apexlib.sourceforge.net

How can i restrict the qty/value at the time of invoice

Hi,
Can you plesae tell me at the time of MIRO how can i restrict the user not to enter the qty more than in MIGO & PO
Thanx

You cannot restrict the qty in MIRO. because it is used for partial invoice receipt.
E.g in some cases 100 nos of qty might have received in one GR. But the supplier may give 3 invoices for this. that is the reason u cant restict this
reward if useful
SK

My phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is gone

my phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is not salvageable? thank you so much in advance for your help!

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then see Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

How can I change the date of birth on my child's Apple ID?

HI,
My son's school have started an initiative where they use iPads as part of their lessons, and subsequently my son has a brand new iPad through the scheme.
The setup guide that the school supplied directed us to enter the parent's date of birth and the student's name to set up an Apple ID. However, since setting his iPad up we have become aware of Family Sharing when we setup our old iPad for his younger brother, and the ability to create an Apple ID for a child. We would obviously like the same level of protection and security for both children, not to mention restricting any accidental purchases!
Is there any way to change his date of birth from mine to his? I have read other similar posts with the best solutions apparently to fudge the date of birth so that the child is older than 13 years old. I would like to do this properly rather than lie about his age...
Thanks in advance

You can not change the date of birth on the account. You are explicitly told this when the account is created.
The ID you created is yours, not your son's. If your son is under 13, then to claim it is your son's ID is to say that you committed a crime when you created it. Create a new account for your son.
Inform the school that if they are instructing parents to do this because the children are under 13, they are potentially criminally liable. They should know better.

Restrict the no. of rows entered in select-options

Dear ABAPers,
I have used CALL FUNCTION 'SELECT_OPTIONS_RESTRICT' to only allow user key in single value. The field is BUKRS(Company Code). Can I restrict the number of company code entered by user in this select-option? Please advise.
Thanks in advance.
Best Regards,
Hikaruno

Sure, just do a check in the AT SELECTION-SCREEN event.
at selection-screen.
data: lines type i.
describe table s_bukrs lines lines.
if lines > 10.
message e001(00) with 'More than 10 entries'.
endif.
Regards,
RIch Heilman

How can i restrict the Expenditure Type values at a specific OU ?

Dear Guys,
I would like to ask about the Expenditure Types,
I have implemented two projects for different Operating Units ,
when navigating to any Projects responsibilty,and navigating the Expenditure Type field
the values exist are all the values implemented across the OU not the values entered at this OU
How can i restrict the Expenditure Type values at a specific OU
Regards
Amr Hussien

Hello
When you set up a project there is an option called Transaction Control.
This option allow you to list the allowed or restricted elements of costs for the project.
You may enter the transaction control on a project template and that will be copied to any new project.
The cost elements may be expenditure types, expenditures categories, suppliers, employees, etc.
In your case, I suggest to set up specific project templates for each operating units. On each template enter the list of allowed expenditures types for that OU.
Doing so, the system restricts users from entering any expenditure item, supplier invoice, purchase cost etc, against an expenditure type, which is not allowed.
Dina

How can I change the date format in a Numbers table?

I have selected all of the cells in a date column, opened the Inspector and selected the Date & Time format, selected the date & month format butb the cell date does not conform to this format. Instead I am getting the month, day, year, and time.
Stu

Stu,
In order for Numbers to format the date it must already be a valid date. If you post a screenshot we can see that the dat is valid.
Make sure after you enter the date that the date ends up being right justified AUTOMATICALLY. If the date is NOT valid, Numbers interprets it simply as text which it leaves left justified

Defining Authorizations for User to restrict the data in report.

Hi Gurus,
I have no idea on authorization concept in BI. Please give me anyone steps to creating authorization objects, roles and profiles to restrict the data for users.
Ex.
i have functinal location info object checked as authorization relavent with below data.
FL001
FL002
FL003
FL004
FL005
FL006
FL007
FL008
FL009
We have users like below.
User1
User2
User3
Now, if User1 is analysing a report he can see only FL001, FL005, FL009 only, remaining have to be omited.
If User2 is analysing that report he can see only FL002, FL003, FL009. And like wise.
So, Please help me providing the completed steps. I have done somting but failed.
Thanks in advance
Peter.

Hello Peter,
Please go through the following links
Authorization :
http://help.sap.com/saphelp_nw70/helpdata/en/59/fd8b41b5b3b45fe10000000a1550b0/frameset.htm
SAP Authorization Concept :
http://help.sap.com/saphelp_nw70/helpdata/en/52/671285439b11d1896f0000e8322d00/frameset.htm
Thanks.
With regrads,
Anand Kumar

How can I make the data persistent when using plist ?

I have a UITableView table1. And when I touch any cell in the table a new UIViewController appears and it have two UITextField's name and description. After entering the data in both the text fields I used the save button to save them. In save method I wrote the code for the data to be stored in plist.
-(void)save:(id)sender
indexOfDataArray = temp;
NSString *string1 = [[NSString alloc]init];
NSString *string2 = [[NSString alloc]init];
string1 = nameField.text;
string2 = descriptionField.text;
NSDictionary *myDict = [[NSDictionary alloc] initWithObjectsAndKeys:string2, string1, nil];
[myArray addObject:myDict];
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *path = [documentsDirectory stringByAppendingPathComponent:@"VideoData.plist"];
[myArray writeToFile:path atomically:YES];
UIAlertView *alertMesage = [[UIAlertView alloc] initWithTitle: @"Save Alert" message:@"The data entered is saved" delegate:nil cancelButtonTitle:@"cancel" otherButtonTitles:nil] ;
[alertMesage show];
[alertMesage release];
[myArray retain];
But the problem is every time I restart my application the data in the plist is deleted. How can I retain the data in the plist name I specified ?

I think yes, I am specifying only one file name to store in the path. I understood my where I am wrong.
If I added data in plist for two items(item1 and item2). And again I need to add next two items(item3 and item4) . How can I make item3 and item 4 do not replace item1 and item2 ?
Thank You.

Can you export the date and user to Excel that appears into a Comments field in a tracking list?

Hi everyone,
Can you export the date and user to Excel that appears into a Comments field in a tracking list?
When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
In the Comments field appears also, besides the comment text, the user and date from who and when the comment is added.
Is there a way to export also the user and the date?
Thanks
Wim

create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
updating that field with the new comments (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
Please refer few more links: Hope they will help
http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
http://community.office365.com/en-us/f/154/t/278560.aspx
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Restricting the data using attributes

Hi All,
I have to restrict the data in my report based on the Order type and Order Status. But these 2 fields are
attributes to Sales Order. Is there any possibility to restrict the query using the attributes of a CHAR.
Rgds,
Nene.

Hi Nene
May be your mate
this is the F1 help text
Selection of Filter Values for Query Definition
This field describes how the selection of filter values and the restriction of characteristics functions when you define queries.
The values from the master data table are normally displayed when you restrict characteristics. For characteristics without a master data table, the values from the SID table are displayed instead. In a number of cases, however, it could be better to display only the values that are in the InfoProvider. The setting "InfoProvider Values Only" is permitted for this reason.
Selection of Filter Values for Query Execution
This field describes how the selection of filter values functions when a query is executed.
Normally the values from the data selected by the query are defined when you select filter values as you execute the query. Only the values for which data was selected for the current navigation status are displayed.
In a number of cases it can make sense to permit additional values as well. The settings "InfoProvider Values Only" and "Master Data Table Values" are allowed for this reason. If you make this selection, the message "No Data Found" may appear after selecting filter values.
and regarding the status 6 records are you sure that the master data related to that is active if not run arrtibute change run that might be helpful
Regards
Ajay

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

How can i check the data Of the phone and repar it

Thank you jeremy to replaying me , i forget to informe you,i already initialyze the phone, i am now how can i chek the data data of phone and repar the missing data(Read,write)
The data are Numbers.
i am new in Labview someone can help me withe sample.

I do this type of thing for a living, so I am restricted (by contract) in what I can say. Therefore this answer will be sufficiently general to help you get started but without doing the work for free.
Here goes;
You will have to find out at least three SETS of details.
1) Find out what physical interface to the phone is. By this I mean what type of connector do you need to plug into the phone, What type of signals are transfered back and forth, and how they are used.
2) Determine the protocol used. This is the actual commands and response that can be sent to the phone and are returned by it. Get all of the details.
3) Determine the what functionality is support by the phone that is usefull to you. This would be things liked, "How do
I get a list of all the numbers", how do I modify a number", etc.
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can we restrict the other user to add their user id's to the user group created in SQ03?

Hello All,
How can we restrict the other user to add their user id's to the user group created in SQ03?
When we enter the user group name and click on "Assign users and Infosets" button in the attached pic "User Group" .
I was able to enter my user id in other user groups. How to Grey out the other rows in the attached pic "User Group 1".

How strange I answered (or at least helped) this very same question earlier today. Here the link to my previous answer then:
http://scn.sap.com/thread/3536135

Can we restrict the data to be entered in payroll area

Similar Messages

Maybe you are looking for