Can we run CK40N for the past month?

Hi All,
One of our users forgot to do the cost estimate for the month of May, that's why when he run CK40N (June 1), the prices went to future price, (i think because our MM is still May). I have some few questions and hoping for your positive feedback.
1.) If we open the June period, will the future price became present price? or we need to run again CK40N?
2.) Can we run CK40N for the past month of May? Reason is, we would like to capture the prices of Material last May.
Please advise.
Thank you in advance.

Hi Tina,
CK40N Meant for creatting cost estimates for the product and estimation is some wht which you create for future or current period. It is not possible to run ck40n for the past period.
Now since you said that period june is not opened in MM. you can not release the price i.e.ck40n for june. check the details fo costing dates you have put in the dates parameters in ck40n. If you have run ck40n for june  then after marking the price system will set the price as a future price and same prices become the current price once you release the price. So if  you r executing ck40n  for june and june is not opened , you can not release the price. First u open the period june then execute the release functionality future price would automatically become the current price for  JUNE.
Regards / Ashok verma

Similar Messages

  • HT201250 Is there a way to change the intervals at which Time Machine performs backups (e.g., weekly instead of hourly or daily) past 24 hours, daily for the past month, and weekly for everything older...

    Is there a way to change the intervals at which Time Machine performs backups (e.g., weekly instead of hourly or daily) past 24 hours, daily for the past month, and weekly for everything older...

    You can edit the interval in Console or install a Pref Pane
    called TimeMachineScheduler (Leopard or higher) free from:
    http://www.klieme.com/TimeMachineScheduler.html
    Good luck, Tom

  • Wifi "unable to connect" for the past month

    I have not been able to connect to my home wifi for the past month. It keeps popping up saying that it is unable to connect. sometimes it will work, but only for 2 minutes tops. My roommate uses the same internet connection and she said that she has not had a problem with it. I have tried rebooting it, turning it on airplane mode then resetting network settings and rebooting it, forgetting the network, and even resetting my entire phone. nothing will work. but my phone connects to the wifi at work and works perfectly fine. SOMEONE PLEASE HELP

    The router in 99.99% of the time may be fine and see and connect to the devices it detects. However after certain updates to phones it has been said that the phone will not connect to the router.
    There was a list of known routers on this forum that just did not work. The so!ution was to either reset the broadband modem, wireless router and turn off the phone.
    Then if it connects your problem is solved. If it doesn't your next step is to see if there are firmware updates for the modem and the router. (Mainly routers) if it still does not connect a new router not on the non working list should be purchased. Yes its another expense but if you want the device to connect that is your option.
    Another trick you can use is to change the security from WEP to WPA, PSK or WPA 2 and change the password to the router.
    Some people stated a password of at least 9 figures / digits worked great.
    If you placed the phone on its own IP address that also has been known to work.
    However its best to talk to tech support at the router maker to assist.
    Good Luck

  • For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

  • Firefox update download for my Mac in zip code 96822 just runs and runs without downloading anything. Has been happening for the past month. ???

    Over the past month, when Firefox indicates it has an update for me, and to download it, all I get is "connecting" and nothing happens. We live in 96822. This is for a Mac.

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Need to delete the requirements in md61 screen for the past month

    Hi Gurus,
    I am having one requirment that my client need to auto delete the md61 screen entries , Suppose the requirement is maintained for 1000 the planned order will also generated for 1000 qty if stock is not available , then the production is done only for 500 quantities. On the next MRP run the system is considering again the past month 1000 quantities .
    How we can restrict this? If suppose the balace 500 quantities also the user dont want to produce . Then how can we delete automatically .
    Pl help me out this.

    Hello Vishnu,
    You can delete the old PIRs when the new month begins through batch job for MD74/MD75/MD76.
    Other way is to define a period of adjustment for the MRP Group in transaction OMPG and assign the MRP group to your material. Please refer F1 help there
    Adjusting in the past, that is the period of adjustment is calculated backwards - the system starts from today's date and calculates backwards by the number of days specified. Thus, planned independent requirements that lie before the date calculated by the system are not included in the planning run.
    Please refer
    MD61 considering Past requirements
    Best Regards,
    R.Brahmankar

  • Sudden Slow Internet (for the past month or two)

    Hi all,
    I've had my iMac since December 2009 and it's always been well behaved.  However, in the past couple of months, the internet speed has been inconsistent to the point where it is now pretty much as slow as it could ever be.  Web pages take minutes to load, Dropbox is a no go and Skype just cuts out.
    As well as the iMac, I have a Macbook and an iPhone and the internet on these is still as fast as ever.
    I rang my internet service provider and they did a few rough tests before claiming it was the Mac that is at fault, especially if the laptop and phone speeds are okay.
    So I just wanted to ask, are there any causes for slow internet?  Is there anything I can do?  Shoudl I investigate further with my ISP?
    Ben

    Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
    Restart your router and your broadband device, if they're separate. Any change?
    If possible, connect to your router with an Ethernet cable and turn off Wi-Fi. Any difference?
    If you can connect to more than one network, are they all the same?
    Is networking always the same, or is the problem intermittent?
    Disconnect all other devices from the network. Any change?
    Boot in safe mode and test. Any difference?
    If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

  • Iphone 4 will not sync with cloud, just tells me it failed and try again for the past month

    my iphone 4 will not sync with teh cloud.  I tried deletaing the backup on the cloud adn starting a new one, I tried resetting cloud on my iphone adn still an error that jsut says it had an error and try again later for over a month now.  any suggestions?

    Hi not sure if Im leaving this is in the right place but here is my issue:
    I have an iphone 4s and everything is working, including syncing it except that I have shot two videos that are 30 and 60 minutes that are not showing up on itunes. Therefore, I cannot save them and delete them off my phone. Curiously, when I view my phone on itunes it is showing on the content summary (color coded bar on the bottom of the screen) that the 'other' type content is 13 GB. I don't have other content and I am positive itunes is not recognizing them as video but 'other'. Any thoughts on this? My phone is full and don't want to delete these two interviews I shot. Thanks.

  • I cannot connect to the iTunes store and have not been able to for the past month. I have tried everything and nothing.

    It keeps saying my network has timed out, but I am connected to the internet.

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than Network connectivity tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • AT&T service has really been poor for the past month (50+ houses impacted)

    I live in rural Colorado west of Fort Collins. About a month ago our AT&T service went from great to horrible.  Incoming and outgoing calls fail. incoming and outgoing texts fail, are delayed by hours/days or never arrive, sometimes you can't listen to voice messages, voice message show up and your phone never rang.  This negative change is impacting over 50 families in our small area.  Several of us have called AT&T and have not received the same responses.  Something significanty changed recently to cause such a terrible change in the wireless service (hardware or software).  People who work from home can no longer rely on AT&T wireless, emergency calling is compromised, just a mess.
    How can we get it on AT&Ts radar at a higher level?
    Any guidance would be greatly appreciated.   Thank you.
    Gerry  [edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]

    ATTMobilityCare wrote:
    Hi there! @rmroper  Thanks for posting your concerns. I’m sorry to hear about the issue with service in your area.  So we can further assist you, please private message me by clicking here and provide the zip code where this is taking place. Thanks!ChariseThe zip code is 80538   Many of us are using Mark the Spot.I think there is a tower on Milner mountain (don't know for sure).  If there is and there is a problem with that tower that would be the most likely candidate as the cause.Can you tell if there is a tower on Milner mountain or is there a way I can see where towers are located around Fort Collins and Loveland Colorado?

  • I just accidentally delected a note that I've been working on for the past months. Please I help on how to recover it. I'm using iPad, thank you

    Pls this note is the most important thing for me now, is all I have for my exams tomorrow 16.04.2015. Is my two months of study, and I'll be in a big trouble if I don't get it. Pls I need your help

    Restore your iPad from your backup.

  • I need help. My new iphone 4s was working with no errors for the past month. I was out one right and it was below 30 degrees. when i came in ny house it was about 75-80. I went to sleep and nothing was wrong with my iphone. I woke up and it won't turn on.

    If anyone could help?

    Hello dvf276
    Follow the steps in the article below to resolve issues with your iPhone not powering on.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    -Norm G.

  • IPhoto "Unexpectedly Quit". When I went back in, about the past month's worth of uploaded photos was missing. What happened, and how can I retrieve them?

    IPhoto was open, but "unexpectedly quit".  When I opened it again a couple days later, my most recent photo uploads (for the past month or so) were missing, with dated Events folders saying "no photos". This had happened another time about a year ago? What happened, and how do I retrieve my photos?  I hadn't backed them up, but do they automatically do so on iCloud?

    Assuming you're running iPhoto 9 or later do the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
    2 - run Option #4, Rebuild Database.

  • I've been unable to attach documents to my e-mails for the past week, yet I can with IE.

    I use Firefox 20.0.1 and Yahoo Mail through AT&T. For the past month, I've been unable to attach documents to my e-mails whether I use the the "Attach" button at the bottom of my mail, or the button at the top. But, here's the rub: when I use IE version 9 with Yahoo, I am able to attach. It would seem to me to be a browser problem. What do you think?
    -Dick Carr

    Does that uploader use a plugin like Silverlight or Flash?
    *https://support.mozilla.org/kb/Troubleshooting+plugins
    Note that Firefox Safe Mode doesn't affect plugins.
    *preferences are not affected
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Depreciation for the past 3 periods

    Hi SAP experts,
    Would you please share your experience on how we can run depreciation for the past periods. In our example depreciation was not run for the last 3 periods.
    The previous periods are of course closed.
    What is the best way to run it now?
    Thank you

    If possible open the previous periods and run the depreciation.
    If period open is not possible, then execute AFAB with unplanned posting run mode.
    Rgds
    Murali. N

Maybe you are looking for