Can we run SCC7 and BDLS in parallel?

Hi Folks,
We are creating a new R3 system which is a copy of a large production system. There is a requirement for running BDLS to change the logical system name. Since the source system is a huge one, SCC7 and BDLS take a long time to get completed. So, just to save time in delivering the system to the customers, can we run SCC7 and BDLS simultaneously? If not, why?
Thanks
Ranga

Hello,
Is there any connection between the two? - Of course
SCC7 is 'Post client copy processing' - which is a part of Client copy
BDLS is logical system conversion to be done after Client copy
Until n unless you are not finished with Client copy why would you want to convert logical systems ?
I would say, you please go through some BDLS SAP Notes to get the concept first - as why we need to run BDLS.
Thanks

Similar Messages

  • CAn I run Lion and snow leopard on the same computer with different sign-ins?

    CAn I run Lion and snow leopard on the same computer with different sign-ins?

    Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

  • HT1199 Can  I run iTunes and Apps on my Windows 7 computer or do I need an ipad or iphone ?

    Can I run ITunes and Apps on my Windows7 computer. So  far the one App I have downloaded just won't run. Do I need an iPad or IPhone to run these programmes?

    There is an iTunes on the idevices, just a Store effectvily.
    There is an iTunes on a PC and Mac, which is the Library handler, and connects to the iDevices for sync and backup.
    The Apps that you download for iDevices are downloaded with "Appstore" on that iDevice itself, or downloaded on the Mac or PC with iTunes for transferring to the iDevice.
    That apps will only run on the iDevice.
    For Window s7 and Windows 8 there has just been released a new iTunes version 11.
    Lex

  • I can't run LR5 and EOS utility at the same time

    I'm running Mac OS 10.9.5, LR5.7 & Eos Utility 3.
    I can't run LR and Eos3 at the same time. Eos just crashes and have to force quit Eos.
    Any tips anyone?
    Do I have to downgrade to Eos2. Not a problem really I suppose.

    LR supports tethering using a Canon DLL and EOS Utility probably also supports tethering or at least uses something from a similar Canon DLL.  You probably cannot have two different versions of that DLL loaded at the same time, so it makes sense there are problems.

  • Can we run SYSAUD and DDDAUD reports from AppDesigner? If yes, how to?

    Can we run SYSAUD and DDDAUD reports from AppDesigner? If yes, how to?

    No, you cannot run any program from AppDesigner. This is a development tool.
    However, without the front end application, you could be able to run programs through the commands lines (PSSQR/PSAE...)
    Nicolas.

  • Can I run rhino and grasshopper on a virtual windows on my macbook air?

    Can I run rhino and grasshopper on a virtual windows on my macbook air? I keep getting a not enough memory message.

    The USB stick from your MBA cannot be used on any other Mac. You will need to purchase a retail copy of Snow Leopard for your other computer.
    If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.

  • Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

    Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
    Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Can I run Sage and MS Access either in emulator?

    Hi
    I am considering buying my first Macbook. I still need to run MS Access and Sage.
    I have been informed that I can dual boot a Mac with Mac OS and Windows 7/8.
    I wondered if there was an emulator facility that would also allow me to run Sage and MS Access instead of dual booting.
    Is this possible?

    Well, Virtual Box is free, the other 2 are not but have free trials (30 days) available, I use VMWare Fusion 5, not because I think it is superior but because I have used it for a long time and also use VMWare's other products for other tasks (virtualizing Exchange servers). Having said that I have used Parallels and VirtualBox without losing much of anything (or gaining much of anything either), in short they all seem to work well. Make sure to use the latest versions.
    PS:
    Use Windows7 Professional for it's superior memory handing and network/remote connectivity.

  • Can I run Tiger and Leopard on the same computer

    Hi folks.
    I've been meaning to install Leopard for ages but have never got round to it (I bought the retail box when it first came out). I have upgraded my RAM to 2GB and my hard drive to 320GB with no problems.
    My upgraded hard drive has been partitioned into 2 equal parts of 160GB. These appear on desktop as Mackintosh HD1 and HD2. HD1 is the disk with all my files, music, OS etc and HD2 is empty
    I have 2 bootable clones of my present system - one is on a 160GB external and the other is the original 80GB HD that I replaced.
    My question is this - can I install Leopard on to my 160GB external HD, then clone it on to the empty HD2. If I do this would I be able to run both Tiger and Leopard on the same Macbook?
    Is there any problems with this plan? Would I be able to transfer between the 2 OS and how do I install Leopard on the external drive. Is it just a case of inserting the Leopard DVD and choose the external drive as the target?
    As usual thanks in advance
    Del

    # Original Tiger in the internal HD, New Leopard in the external HD.
    # New Leopard in the internal, Legacy cloned Tiger in the external.
    # Split internal, one partition with Tiger, another with Leopard.
    Leopard is backwardly compatible with older Macs, just make sure yours fulfills the minimum system requirements, both use the same filesystem format, so each can see the other. You can't run both at the same time, unless you purchase the server version of Leopard and run it virtualized. 99.9% of Firewire external HD's are bootable, some USB's are bootable but have to test first. You can choose which system to boot from by pressing the Option key at boot time, before the chime. Just make sure the external HDD is plugged in and turned on if that's where you want to boot from.
    When I migrated my PBG4 from Panther to Tiger, got an external FW HDD, cloned Panther onto it, upgraded using Archive and Install, cleaned up, customized and tested it. When I was satisfied all was ok, cloned the original Panther onto another partition of the external HDD, wiped and tested for failure the internal HDD, then cloned the known good and tested Tiger into it. Only thing that died along the way was my old and ancient Photoshop v2.x, that refused to run on Tiger.

  • Can i run 2GB and 4GB of ram in a 2010 mac mini?

    as i know you can't run a 512MB with 2GB as the size difference is to great

    A part of your physical memory is being reserved by your BIOS, depending on the installed hardware. What's left is for the OS to add to the virtual address space (physical memory + pagefile), usually no more than 3.25 GB for a 32 bit OS. Decrease your pagefile in size to a couple hundred MB, it might change something and you will barely need it anyway...
    If it's available in your BIOS, enable Memory Remapping.

  • Can we run multiple sapinst programs in parallel?

    We are planning to upgrade our EP, XI and BW simultaneously. These SIDs all reside on the same server and same OS. Is it possible to run multiple sapinst programs in parallel? I know it may require specifying separate ports for the 2nd and 3rd instance of sapinst. For example: sapinst 1 gets default ports 21212, 21213. sapinst 2 will take 21214, 21215 and sapinst 3 takes 21216 and 21217.
    Has anyone attempted this sort of a thing before? Appreciate your thoughts.

    Never done that before, maybe it works .. however it could run into problems when the sapinst are trying to access the same paths / files.
    Regards,
    Siddhesh

  • 11i : Can we run Apache and Forms on cluster for failover?

    Hi... We are currently running 11.5.5 successfully on 4 servers:
    URANUS (cluster made up of HADES and ATHENA) : database and reports
    ARTEMIS : forms server
    PEGASUS : http server
    We are now attempting to reconfigure the application architecture to increase
    failover because if ARTEMIS or PEGASUS fails, our system is unusable. At the
    back end we are ok because we can bring up the database and reports server on
    the secondary node in the URANUS cluster.
    One of the options we are considering is to cluster the 2 machines ARTEMIS and
    PEGASUS together, and run forms and http on the one primary node. If the
    primary node in the cluster failed, then we would bring up the forms and http
    server on the secondary node automatically when failover happens.
    Has anyone done this?
    Does Oracle support the clustering of these application tier services (http and
    forms) on Compaq TRU 64 clusters?

    hmm.. that's a very interesting question... if you find out please let me know too.

  • Can we run SQC and cobols via CA?

    Hi All,
    A couple of questions for you all. I am trying to test CA by creating manual steps. I have been able to run sqr and dms via CA. Here's what I am stuck on
    1. Can we run Cobols in CA ? For Test batch cobols like PTPDBTST ?
    2. How to run sqc files in CA? for eg-dddviews.sqc, if we give only dddviews in step properties, then the log shows that CA takes it as dddviews.sqr. If we give full name dddviews.sqc in step properties, then CA takes it as dddviews.sqc.sqr . In both the cases, the step fails. How to run sqc files ?
    Thanks
    Edited by: 855776 on Feb 20, 2012 4:41 PM

    Hi,
    These are all the steps you can define in CA, also to found in PeopleBooks > PeopleTools 8.52: Change Assistant > Modifying Step Properties and Parameters with detailed descriptions:
    Application Engine
    Build Project
    Compare And Report
    Copy Database
    Copy from file
    Copy to file
    Create project
    Merge project
    Data Mover-Bootstrap
    Data Mover-User
    DBTSFIX
    Deploy file
    Execute process
    Load Base Data
    ProcessScheduler
    SQL Command
    SQL Script
    SQR Report
    UpgradePeopleTools
    As you can see you, there is not step for Cobols or SQC.
    Instead of trying to run a Cobol straight from the CA, you can define a ProcessScheduler step, which will run the Cobol in the Process Scheduler, just as you would initiate Cobol from online PeopleSoft.
    You should use SQC's in SQR's, so if not yet done so, create a SQR that calls the SQC.
    Now you can use step SQR Report to execute the SQR which will execute your SQC.

  • Can't run Pshop and another adobe program at the same time

    Hi all,
    I'm experiencing a frustration problem. I can't run two adobe programs a the same time - ie, Lightroom and photoshop, After effects and photoshop.
    Lightrrom and After effects sem to be playing together okay at the moment so looks like it may be a PShop issue.
    Running final release of windows 7 64 bit, licenced PS3, trial AE, trial PS4....8GB Ram,  has been with both Nvidia and ATI video cards, open GL on , Open GL off, seperate scratch disks, reinstalled everything,
    Any help, advice, hints would be really appreciated as having to close programs all the time when switching apps is a real pain in the neck
    cheers
    Jeff

    thanks whytefly,
    yeah I thought that may be the case but then realised both After effects and CS3 are 32bit (86x) and I can't run those together
    I'm jealous as hell that you can run 3 together  haha,
    cheers
    Jeff

  • Can I run bootcamp and mac osx

    Can I setup two different user accounts with one running bootcamp with windows and the other running mac osx?

    You don't "run" Boot Camp. You run Windows and OSx.
    Install Windows using Boot Camp Assistant. Create a password protected Windows user. Create a password protected OSx user.
    When someone boots the computer have them press and hold the option key. If Windows is selected as the boot option, only the Windows user will be able to log in. If OSx is selected as the boot option, only the OSx user will be able to log in.

Maybe you are looking for

  • How to change the text in a browser title bar?

    I'm new at flash and I'm finding most things obvious, but this is one I just can't figure out! How the dickens do you change the text that shows in, say, an Internet Explorer window? Is it by filename? Mine, the index page, currently shows as the exc

  • InDesign CS6 not Packaging

    Hello, We are having problems with InDesign on two out of our three mac's at work. Simply put when we go to Package a document and click 'Package' on the summary page it proceeds to do nothing. It doesn't crash or anything like that but doesn't move

  • View and Navigate through PDF´s on a DB2 SQL Query

    Hello, We need to create a windows forms application in .Net to view and navigate through pdf´s that are located on a DB2 Express SQL database using the Acrobat SDK or PDF Library. The idea would be to query the SQL table and the result we should be

  • Loop - checking for lock to clear

    My application uses tables that are refreshed from their sources. I have a table with a field in it that if set to "locked" (by an external process or another user of the application). I set an item (P1_LOCK_STATUS) to the results of the select state

  • Rating in SLR

    Hello All, I have defined myThresholds in the "Target KPIs" while doing the SLR Set-up. Still then, the Rating is not reflected in the SLR. What can be the reason. Thanks!