Can we run SYSAUD and DDDAUD reports from AppDesigner? If yes, how to?

No, you cannot run any program from AppDesigner. This is a development tool.
However, without the front end application, you could be able to run programs through the commands lines (PSSQR/PSAE...)
Nicolas.

Similar Messages

Can I run a BI Publisher report from interactive report

Hi,
I have an APEX interactive report and want to run a BI publisher report by clicking on a column value within the interactive report. Is that possible?

Hi 918900,
This is possible.
Set the column in the interactive report as link to page 0 with the report name in the request field
PRINT_REPORT=<your report>. Don't forget to specify the Display type for the column as 'Standard Report Column'.
Geert.

How to move all the standard and adhoc reports from cube to multi provider

How to move all the standard and adhoc reports from the basic cube to multi provider?
i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
Thanks in advance sdn experts!

Hi Les,
This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
Hope this helps...

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

How Can I Run a SQL Loader Job from Schedular

How Can I Run a SQL Loader Job from Schedular , So that It Runs every Day.

Depends on a couple of factors.
If you are on a UNIX platform, you can create a shell script and schedule it with cron.
If you are on a Windows platform, you can create a batch file and schedule it with the Windows scheduler.
Or, if you are on Oracle 9i or 10g, you could use the external table feature instead of SQL*Loader. Then you could write a stored procedure to process the external table and schedule it using the Oracle scheduler (DBMS_JOB). This would probably be my preference.

I can't run LR5 and EOS utility at the same time

I'm running Mac OS 10.9.5, LR5.7 & Eos Utility 3.
I can't run LR and Eos3 at the same time. Eos just crashes and have to force quit Eos.
Any tips anyone?
Do I have to downgrade to Eos2. Not a problem really I suppose.

LR supports tethering using a Canon DLL and EOS Utility probably also supports tethering or at least uses something from a similar Canon DLL. You probably cannot have two different versions of that DLL loaded at the same time, so it makes sense there are problems.

Running an SSRS 2012 report from C#

Hello
I have created the report in SSRS and it works fine
I would be grateful if someone gives me a step by step procedure / link to Run an SSRS 2012 report from C#.
regards
Manoj Gokhale

see this article
http://www.codeproject.com/Articles/675762/Call-SSRS-Reports-by-using-Csharp
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Can I run rhino and grasshopper on a virtual windows on my macbook air?

Can I run rhino and grasshopper on a virtual windows on my macbook air? I keep getting a not enough memory message.

The USB stick from your MBA cannot be used on any other Mac. You will need to purchase a retail copy of Snow Leopard for your other computer.
If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.

Why can't I drag and drop music from a folder on my PC into my iTunes window?

Why can't I drag and drop music from a folder on my PC into my iTunes window?
I have not found any article that has answered this question. They have come up with things like open the side bar and it will work, or you are using wrong format of music. Now this all happened when I upgraded to iTunes 10 and has not worked since and it worked fine before. Music format is correct, I have even gone as far as copying a file already in iTunes and trying to add it again. As soon as the files enters the frame of iTunes the music files icon the pointer is carrying turns into a circle with a slash through it.
ITunes Ver. is 11.1.5.5 Windows Ver. is Windows 8.1 Pro with Media Center
Files I have tried adding are standard MP3, 256 kbps purchased AAC Audio file, MP3 converted by iTunes into a 256 or 320 kbps AAC Audio file. None can be draged and droped but all can added by going to File/Add File to Library... or File/Add Folder to Library...
Add items from your computer to your iTunes library
Do either of the following:
1. Drag a file or folder from the desktop to the iTunes window.If you add a folder, all the files it contains are added to your library.
2. In iTunes, choose File > Add to Library, locate a file or folder, and click Open.
I can add files and folders by doing number 2 above but can not doing number 1
I have gone as far as uninstalling iTunes and reinstalling per apple procedures below.
Steps
1. Remove iTunes and its related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order or only uninstalling some of these components may have unintended effects.

I had this problem on Windows 8.1.1 and iTunes 11.2.2.3
To resolve it from within Itunes I did : Edit, Preferences, Sharing.
I took the tick out of "Share my library on my local network"
Click OK.
Closed iTunes/
Reopened iTunes and I can drag and drop.
I went back into Edit, Preferences, Sharing and put the tick back and clicked OK.
Works fine now.

CAn I run Lion and snow leopard on the same computer with different sign-ins?

CAn I run Lion and snow leopard on the same computer with different sign-ins?

Alternatively, partition your internal HD and dual-boot it. Do note that you have to reboot to switch back and forth. You can't do it by logging out and back in.

I have 2 Macs - an iMac that holds my entire iPhoto library and a Mac Book Pro that I use to hold a subset of the main library - how can I transfer photos and their metadata from the main library of the iMac to my Mac Book?

I have 2 Macs - an iMac which holds my main iPhoto library and a Mac Book Pro which holds a subset of the library. How can I transfer photos and their metadata from the main library to the smaller 1 on the Mac Book Pro?

Link the two Macs together and use iPhoto Library Manager
Regards
TD

I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

Hi champrider,
You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
OS X Mavericks: Allow access using Apple Remote Desktop
This help page will provide you with some other useful resources for Apple Remote Desktop -
Remote Desktop Help
Thanks for using Apple Support Communities.
Best,
Brett L

HT1199 Can I run iTunes and Apps on my Windows 7 computer or do I need an ipad or iphone ?

Can I run ITunes and Apps on my Windows7 computer. So far the one App I have downloaded just won't run. Do I need an iPad or IPhone to run these programmes?

There is an iTunes on the idevices, just a Store effectvily.
There is an iTunes on a PC and Mac, which is the Library handler, and connects to the iDevices for sync and backup.
The Apps that you download for iDevices are downloaded with "Appstore" on that iDevice itself, or downloaded on the Mac or PC with iTunes for transferring to the iDevice.
That apps will only run on the iDevice.
For Window s7 and Windows 8 there has just been released a new iTunes version 11.
Lex

In Pages 09 we can do Mail Merge and Import Styles from a document. Can someone please explain how we can do this with the new version of Pages 5.1. Even Apple solutions are only valid for Pages Version 09. What a DOWN GRADE!

In Pages 09 we can do Mail Merge and Import Styles from a document. Can someone please explain how we can do this with the new version of Pages 5.1. Even Apple solutions are only valid for Pages Version 09. What a DOWN GRADE! Thank god Pages 09 is still there.

…and the other 98 missing features.
Just use Pages '09, which should be in your Applications/iWork folder.
Rate/review Pages 5 in the App Store.
Peter

Can we run SCC7 and BDLS in parallel?

Hi Folks,
We are creating a new R3 system which is a copy of a large production system. There is a requirement for running BDLS to change the logical system name. Since the source system is a huge one, SCC7 and BDLS take a long time to get completed. So, just to save time in delivering the system to the customers, can we run SCC7 and BDLS simultaneously? If not, why?
Thanks
Ranga

Hello,
Is there any connection between the two? - Of course
SCC7 is 'Post client copy processing' - which is a part of Client copy
BDLS is logical system conversion to be done after Client copy
Until n unless you are not finished with Client copy why would you want to convert logical systems ?
I would say, you please go through some BDLS SAP Notes to get the concept first - as why we need to run BDLS.
Thanks

Can we run SYSAUD and DDDAUD reports from AppDesigner? If yes, how to?

Similar Messages

Maybe you are looking for