Can we save our canvas as a .psd(photoshop) file? as we are saving with .jpg or .png format with the

 
               I have 2-3 image in my canvas and i want to save it in .psd format means each image will act as a different layer when we will open the saved file in                  photoshop.
                Thanks & Regards,
                Parth

no dear there is not any option as u suggested.
rightnow i am using my canvas and making the bytearray of it and then I am saving this bytearray  with .jpg/.png format with the JPEG/PNG Encoders. but what it does? It makes a single .jpg file of canvas so if there are 3 images in it than it will save entier canvas as .jpg.
I want to save each image as different layer and finally the canvas should be save in .psd format show i can open that .psd file in photoshop..
thanks for the replies
Thanks and Regards,
Parth

Similar Messages

  • I edit my photos in Photoshop, save as jpeg then import back into iPhoto.  But if I add text to an image in Photoshop can't save as jpeg but as psd. Is there any way I can change to jpeg in iPhoto?

    I edit my RAW photos in Photoschop CS3, save as jpeg then import back into iPhoto 11.  If I add text in Photoshop I can't save as jpeg but as psd.  Is there any way I can change to jpeg in iPhoto?

    Terence Devlin wrote:
    Yes you can. But you need to flatten it as jpeg doesn't support layers.
    While the final JPEG can't have layers, it is not necessary to flatten the original Photoshop file to create a JPEG. There are two ways to make a JPEG while not losing the flexibility of preserving layers, and they both flatten on the fly while saving.
    I just tried this in Photoshop CS3 myself. When I add a text layer, and choose Save, the Save As dialog box comes up and defaults to PSD as was described. But... that is just the default! Go ahead and choose JPEG from the Format pop-up menu down below the file list. JPEG is in there. So what happens to the layers? Notice when you choose JPEG, the Layers box grays out and the "As A Copy" box grays out and is checked (i.e. you cannot uncheck it). What is going on here is Photoshop will gladly make a JPEG of your layered file, but it will force the JPEG to be a copy, so as to not overwrite the original layered file. This is good, because your Photoshop file with its editable text layer is preserved, and you get a JPEG copy to put in iPhoto.
    The second way is, instead of doing Save or Save As, choose File/Save for Web and Devices. This will also give you a JPEG choice, and also create an exported copy. Because this way makes files for the Web, they will be smaller than JPEGs from Save As because they will lack built-in previews (which you don't really need these days) and other extra metadata that take up space.
    Either way you get a JPEG you can toss back into iPhoto.
    Terence Devlin wrote:
    Only by exporting.
    The Export menu in Photoshop CS3 does not have any direct choices for JPEG.

  • Can we save our BEX queries in tab-delimitted format ?

    Hi ALL
    Can we save our BEX queries in tab-delimitted format (instead of comma-delimited)?
    Please let me know for further clarifications
    Regards
    Bhagesh

    hi bhagesh:
    You mentioned:
    For eg. We can save .CSV file of BEx query extracts with the help of reporting agent with the help of background schduling.
    Can u tell me procedure for this ? how can i get query output in .csv format using reporting agent and with and without option of schedule it in background.
    I will come back and assign the points to the answer.
    thank you,
    K Smith

  • I can no longer open PSD Photoshop files on Preview

    I can no longer open PSD Photoshop files on Preview since I installed Snow Leopard on my White MacBook. Whenever I double click a PSD file, it opens in Photoshop.
    I used to force PSD files to be opened with Preview by "Get Info" (command + I ) and then Changing the option "open with" to Preview.
    I also tried draggin the PSD file onto Preview, nothing happened.
    Did Snow Leopard stop PSD support, or I'm missing something??

    No, I can still open psd files in Preview, no problem, from both Preview's "Open" dialog and by drag 'n drop onto its icon. It opens simple psd files without error, files with an alpha channel may or may not open correctly, layers will display the topmost layer, if that layer has a mask it displays incorrectly. In short, nothing seems to have changed.
    Francine
    Francine
    Schwieder

  • Can I save both DVD-R and DVD-Video files onto the same DVD?

    Can I save both DVD-R and DVD-Video files onto the same DVD?

    Hi Stan,
    I just want the user to be able to run my video clips either on a 
    computer or on a standard DVD player. It would be nice to include both 
    formats on a single disc. I am new to this and am not sure what format 
    is most widely used for standard DVD players. Thanks for your response 
    and any guidance you can give me.
    Quinn
    Quoting Stan Jones <[email protected]>:
    Stan Jones http://forums.adobe.com/people/Stan+Jones created the discussion
    "Re: Can I save both DVD-R and DVD-Video files onto the same DVD?"
    To view the discussion, visit: 
    http://forums.adobe.com/message/4996961#4996961

  • Can't save 24 x 36 ai version 9 file when opened in CS6

    Can’t save 24 x 36 ai version 9 file when opened in CS6, even when opened as an outline format. I was able to save the file when reduced to 8 x 11, once saved I  resized it back to 24 x 36 but it still didn’t work. Any help would be greatly appreciated thanks

    Sorry to have taken up your time, I have figured it out.  I have about 50 layers and one was bad, process of elimination, I deleted one by one till I found the layer that was causing it to fail.  Files I had converted from .DWG to AI coused an error

  • HT2693 how can i save my pages document as a PDF file or jpeg now?

    Hi...
    How can i save my pages document as a PDF file or Jpeg file now that the share is NA.

    In Pages, go to File > Export > Word, so the document will be saved in .doc to be able to use it in Word

  • Can you save your crop/bleed marks as well as your slug when saving your Indeign document as an eps

    Can you save your crop/bleed marks as well as your slug when saving your Indeign document as an eps

    Let me guess: Your printer asked you to do this, right? Your printer is living in the 1990s and is probably trying to place this in a QuarkXPress file. And I'll suggest you should run, not walk, to find another more modern printer!
    But, if you have to do it, you could export as a PDF file (including the marks, bleeds and slug). Then in Acrobat, choose File > Export (Acrobat 9 Pro) or File > Save as > Other Formats > Encapsulated PostScript (Acrobat X Pro).

  • Can a script be written to take the next 2 files in a folder and place them on a background image..then saving with the first images filename..?

    Hello all, I hope you can help.
    In Photoshop I have a problem to overcome and have delved into the world of scripting..
    If there is a quick way to produce the following could someone help me with some pointers?
    Here is my situation..
    I need to produce a photograph proof card, these are for a double image option so cause me a headache compared to just creating an action..
    This proof card really is just a set of two different photographs placed onto a background image.
    I would produce two different images of the same person and name them exactly the same except they are suffixed with an A or B to keep them together, these would be in a folder with approx 500 other images for example (250 x two of each person)
    My preference for the process would be done in the following sequence:
    1/ Open the background file jpg (which is sized at 2400 x 1800 pixels @ 300dpi)
    2/ Load the first image from the batch file and place this.
    3/ Get the filename of the first image and create it as a text layer and write it below the image at 10 point text size.
    4/ Create another copy of this layer and change the font to 3of9barcode font, however the font needs an asterisk before the text then again after it. e.g. *filenameA*
         Only the first image has the need for a barcode as they are for the same person. This is at 18 point.
    5/ Load the next sequential image from the batch file and place this.
    6/ Get the filename for the second image and as Item 3/ create a text layer below at 10 point text size.
    7/ Place a png overlay with my copyright information over the images (I need to do this twice, once for each image)
    8/ Flatten the images and save the file in a new folder with the same filename as the first image.
    I can do this in Lightroom with the exception of putting the barcoded text, and the filenaming, this is because the background image is used as the identity plate and the filename is not based on the data from either photograph..
    Can anyone shed some light on where to go from here?
    Kind regards
    Bryan

    Photoshop Scripting-wise this seems fairly "easy".
    But I would recommend creating a template file (that already combines background image, png overlay and the Type Layers).
    Maybe data driven graphics would also be an option …
    Photoshop Help | Creating data-driven graphics

  • Labview 7.1 crashes windows XP when using VI's saved with the 'Save for Previous Version' option available in Labview 8

    I am trying to work with a series of vi's developed in Labview 8 in Labview 7.1.  The code was saved with the 'Save for Previous Version' option available in Labview 8.  When trying to use the code in LV7.1 my entire Windows XP system locks up (cursor freezes).  Are there any ideas what's going on and how to fix this?
    Thanks for your help!
    Mike

    I have seen some problems with the save for previous option in the past. Instead of saving the entire hierarchy, try seperating the code into several different pieces and saving each piece individually. Then, see if you can open the different pieces in 7.1.
    If that doesn't help, you should post some more details, like when exactly does it lock up, does it have things like DLL calls, and maybe attach the code.
    Try to take over the world!

  • Is it possible to export a DVDSP menu as .PSD Photoshop file?

    I promise this will be the last question for tonight. Is it possible to export a DVDSP menu as .PSD Photoshop file with its layers intact? I'd like to examine the structure to see if there's an easy way to re-create all my EncoreDVD menus as DVDSP menus.
    Peace, BJ

    Without opening DVDSP, I can't say for sure, but is there an option to export the menu as Movie to Image Sequence? Is there an option to export the menu at all? Sorry for asking a question to answer a question, but I don't have my scratch disk with me and don't want to open DVDSP without having my current project with me. However, the image sequence wouldn't give you layers. Simply put, I don't think so. Apple's apps have played well when it comes to importing .psd files, but as far as creating them, not so well. As far as recreating Encore Menus, is there an XML type file that's compatible with both Encore and DVDSP where you could just reconnect your media assets in DVDSP and then import this XML file?
    Good luck either way and report back with what you find,
    -Brian

  • Illustrator CC, Saving as PSD error "Photoshop file could not be saved." How do I resolve this?

    I need to export some artwork from Illustrator CC to a PSD. It'll work on some artboards but on others I get an error  "Photoshop file could not be saved.".I've restarted and updated.
    Can any one help resolve this issue?
    Cheers,
    J.

    Hi all,
    Had the same issue here. 18 artboards of which 4 didn't want to export to PSD. Couldn't find any reason why but was able to find a work around for me.
    WORK-AROUND:
    create new illustrator document
    copy the content of the artboards that generate problems
    paste the content in a new artboard in the new illustrator file.
    Hope it helps some of you.

  • When I save photos or videos from my iPhone 4S to my PC they are all sideways.  Is there a way to prevent this from happening?  All are taking with the phone in portrait mode.

    When I save photos or videos from my iPhone 4S to my PC they are all sideways.  Is there a way to prevent this from happening?  All are taken with the phone in portrait mode.

    Shot videos ONLY in landscape. For photos choose what's you like. Maybe you have to rotate photos on PC. What's your operating system?

  • I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps.  I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of A

    I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps.  I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?

    Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.

  • I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

    I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

    You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

Maybe you are looking for

  • Error in LOV while opening multiple Screen in OAF .

    Dear friends , I have two OAF pages designed in two different sysetms , 1) Insert page . 2) Search page . The above pages are working fine in local systems , But when they are moved to the server and open these two page in two different tabs , and wh

  • Installing Photoshop Elements on a new computer

    The hard drive on which my copy of Photoshop Elements 6 was installed has crashed and cannot be restored. I will receive a new computer tomorrow and wish to install the program on that. How do I deactivate the program and reactivate it on the new com

  • Re: loop condition using length

    Hi friends, in a loop condition i am using below coding. LOOP AT I_FORM1 INTO W_FORM1. A = STRLEN( W_FORM1-LOTNO ). LOOP AT I_AUFM INTO W_AUFM WHERE CHARG+0(A) = W_FORM1-LOTNO. ENDLOOP. ENDLOOP. But coming error is The length specification "(A)" is n

  • Info Req on Inventory Management

    Hi Experts, I am working on BI 7.0. Our client is planning to implement the Inventory Management in SAP and they will use the BI as the reporting tool. So we need to feed the Inventory management data into BI. So I want to work on that point and need

  • Sec. Optimization self-service - Customer specific auth Checks

    Hi There, checking some automatic check like 0750 I see in SolMan there are some tabs like Green, Red, Recommendation (0705) checking the Customer specific auth Checks I found out only some of them.... I would be interested to know if it is possible