Can we see all the Technical names and field/common names in one screen

Hi SAP Gurus,
Can any one plz. clearify the querry of 'all the technical names, field names, common names, table names in one screen? if so, how?
Thanks inadvance
Regards
Namrata

Hi,
For a particular screen,if u want to see all the technical data,
Go to system->status->screen->double click on the screen->flow logic.
Regards,
Manoj.

Similar Messages

  • I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

    I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
    Thanks!
    David

    Either of these should help.
    http://grandperspectiv.sourceforge.net/
    http://www.whatsizemac.com/
    Or search 'disk size' in the App Store.
    Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

  • I have a big problem, I don't know what I touched but when I open up my iTunes I can't see all the icons. The only icons showing are "podcast, iTunes U and Downloads" so in other words I can't find the movies, music etc. Which means I can't buy/rent!

    I have a big problem, I don't know what I touched but when I open up my iTunes I can't see all the icons. The only icons showing are "podcast, iTunes U and Downloads" so in other words I can't find the movies, music etc. Which means I can't buy/rent!

    Not all content types are available in all countries - in each country Apple can only sell what they are licensed to (and in some cases what a country's laws allows them to). A list of what is available where is shown on this page : http://support.apple.com/kb/TS3599
    Do you have access to other music and film purchase download sites ?

  • Can not see all the clips in large Icon view in my bin

    I arranged my clips in a bin in large Icon view but i can not see all the clips in the bin while in that mode. I see the clips when in list mode or when i drag them out of the bin into the main bin. As soon I drag them back in large icon view bin they do not show up, when going back in list view they are there.
    Any idea
    Also my daughter accidently pulled the electrical plug, which turned my external hard drive off. So the media was off line. I hit reconnect the clip but the clip does not show as connected in the bin it keeps the Media offline icon but putting the clip in the viewer or time line it plays it. So the clip is reconnected
    hope anybody can help with those two issues thanks

    Nick
    thanks for your message it helped to show the clips. Here how I solved it. I put the clips i could not see in large Icon view, to the Project folder. Even in the project folder I was only seeing the clips with Thumbnail in list view. When i hit large Icon view the clips disappeared, and they could not have been lower down as i only have about 5 folders in the project. I then clicked arrange the clip by name and they showed up again. Like that i dragged the clip back in to its bin and it showed up. The reason for going back and forth I arranged the clips manually in the bin before and when hitting arrange by name it spread them to far apart and put the clips not in a sequence I liked.
    for the second part I followed Neil's suggestion it worked.

  • By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

    By default, on a mac keyboard F3 lets you see all the open apps and the such. However, I changed it so that I use those keys for keyboard shortcuts; But i'd like the normal F3 key to still work without me having to press FN.

    rajlego,
    in the Keyboard pane of System Preferences, select the Shortcuts tab, and then select Mission Control on the left-hand side. On the right-hand side, make sure that the Mission Control checkbox is checked, double-click on its current key combination (by default “^↑”) so that the key combination is highlighted, and then press the F3 button — that will set its shortcut to be F3. You can now press F3 to bring up Mission Control without needing to also press the Fn button.

  • Can't see all the drop down menu items in Thunderbird

    I have a MAC OS10.8.5. and Tbird 36.1. I have been searchING for strategies to increase the font size on Tbird. I added the "theme font size and changer". THIS improved my situation a bit.
    I upgraded my MAC from 10.6.8 to 10.8.5. A few weeks later I noticed that I can not see all the contents in the drop down windows.
    I disabled the "theme font size and changer". I deleted the localstore.rdf. No results either time.
    Attached is one of the windows. When I am typing in the "To" field, the auto-fill only lets me see barely 1 email. When I go into preferences on Tbird, the windows for preferences are cut off.
    How can I restore the windows so I can see everything?

    Please check your graphic driver is up to date.
    If it still fails to work after updating drivers:
    Then test in Thunderbird safe mode.
    Help > Restart with addons disabled
    If this fixes the issue then it is possible that one of your addon extensions is causing the problem. You would need to restart in Normal mode and then disable addon extensions until you locate the one causing an issue - maybe it needs updating.

  • How can I see all the Transaction Code that the client is using?

    How can I see all the List of Transaction Code that the client is using?

    Hello Sugauli,
    Did you mean to ask
    transaction types the client is using?
    instead of
    transaction code
    If so, go to SPRO (in ERP system) and follow this path:
    Sales and Distribution -->
         Sales -->
             Sales Documents -->
                 Sales Document Header -->
                      Define Sales Document Types
    All the transaction types that are not used have an X in the column Block.
    Easwar Ram
    http://www.parxlns.com

  • HT4098 I have paid for an iPad magazine subscription, but I can not see all the pages of the magazine.  All I am getting is the free preview.  The magazine company said to contact Itunes, where I don't see a solution.

    I have paid for an iPad magazine subscription, but I can not see all the pages of the first issue I just got.  All I'm getting is the free preview.  I contacted the magazine publisher, IPC, who said to contact Itunes, where I do not see an answer.

    You can contact iTunes Store Support here.
    https://getsupport.apple.com/Issues.action
    Click on Purchases, billing and redemption to get started. Are you sure that you actually downloaded the magazine? I have a subscription to one magazine and I choose to download the magazines on my own rather than automatically.

  • How can I see all  the idocs used in the system

    I am very new in this area. How can I see all  the idocs used in the system. Those which are posted and those which are not.

    Check thes sap help links:
    http://help.sap.com/saphelp_nw70/helpdata/en/90/c4b523c4c411d2a5ee0060087832f8/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/d5/edf15ddcdc11d1890c0000e8216438/content.htm
    - Regards, Dibya

  • Suddenly I can't see ALL the photos on my 4s or 6 from my PC. They are all on the phones .

    Suddenly I can't see ALL the photos on my 4s or 6 from my PC. They are all on the phones .

    You're going to have to describe your network configuration in rather more detail, and start segmenting the problem space into smaller hunks.
    If your network is larger or externally managed or otherwise outside your bailiwick, go talk to your local networking group. It's quite easy to have a subnet router instantiate or a vLAN change made and have the results block the mDNS traffic. mDNS traffic doesn't typically pass across subnets; across IP routers. It's also feasible for a firewall to block mDNS traffic. And managed switches can also get involved here, even if you're not running vLANs.
    It's distinctly possible there's also some sort of a local problem, but if multiple or all computers everywhere here stop showing mDNS, start looking for the commonality; for the common factor(s).
    mDNS is also variously known as Zeroconf and Bonjour.

  • Can you suggest a group messaging app where recipients can't see all the phone numbers within the group?

    Can you suggest a group messaging app where recipients can't see all the phone numbers within the group?  My friends are complaining that they can see all the people in the group; also when I get a response from some in the group, it comes to me ane many others in the goup - its like they've replied all. 
    Any help would be appreciated.
    iPhone 4; iOS5

    Sorry it hasn't worked out for you. I threw together a simple project that uses rectangles to represent your Bike and wheel groups. They all animate across the canvas in the bike group and the wheels rotate. I have attached screen shots so you can see how they are constructed.
    This image showsthe bike group where the orange rectangle and green circle represent the frame. The white rectangles represent wheels and the green and red rectangles I threw in to represent a wheel that has multiple objects in its group as your wheels do.
    Here the animation across the screen has started and notice all wheels rotating and staying with the frame.
    Again a little further down the timeline.
    I put this one in so you could see the group bounding box around the red and green wheel Good luck with your restart on this project and I hope these screen shots are helpful.

  • With the new I tunes I can't see all the uploded CD anymore. How can I do this?

    with the new I tunes I can't see all the uploded CD anymore. How can I do this?

    Please update to the current secure version in the 3x series by going to Help | Check For Updates.
    After you update Firefox, please update the following plugins:
    * Flash player via http://get.adobe.com/flashplayer/
    * Java via '''Windows Control Panel '''| '''Java '''| '''Update''', or by going to http://www.java.com/en/
    * Adobe Reader via http://get.adobe.com/reader/?promoid=BUIGO
    If the problem persists afterwards, please do the basic diagnostics to begin with. See [[Basic Troubleshooting]]

  • How can i see all the songs I already purchased on my two computers. I don't have a network

    how can i see all the songs I already purchased on my two computers. I don't have a network

    nievesfromaustin wrote:
    I guess the question is how can I listen to all my songs that i bought from my two computers if i want to listen to all of them in one computer. I don't have a network.  Is there a web base site I can do that? or anything else?
    Please help
    Songs that you purchase from the iTunes Store are simply files.  They only sit on the computer where you purchase them, until you copy them to another computer.
    That is how it works.  There is no web site where you can play all your files.  It's primitive I know, but there may be changes coming.

  • How to find all the DDIC tables and fields of Tcode?

    Hi All,
    For several transactions we have caprtured all the filed names along with the technical names.
    Ex : in VA03 - in the initial screen ,postal code field is there.When i see F1 help for that field i could see POST_CODE2 as its technical name.
    But i want to see the actuall DDIC table field which corresponds to this field that is LFA1-PSTLZ.
    Like wise there are so many T-codes for which i need do the same thing.But for some transactions i am unable to find out the database tables and the corresponding fields.Please suggest any other easier way to do this.
    Is there any way to find out  all the DDIC tables and fields that gets updated for a Tcode?
    Please help me out in this.
    Thanks,
    Jyothi D.
    Edited by: jyothi dosapati on Mar 27, 2008 2:48 PM

    HI,
    DDIC tcode is  SE11
    GIVE THE TABLE NAME THERE AND CLICK DISPLAY
    FOR EXAMPLE
    TYPE LFA1 THERE AND CLICK DISPLAY....
    Regards,
    V .Balaji
    Reward if usefull

  • Can not see all the SQL server views

    My SQL Server 2005 (SP2 STD)  has about 1000 views. When I created a Crystal Report using Crystal Report 10, I can only see about 225 views are listed in Database Expert. Here is the procedure to reproduce the problem:
    1. Create a new Crystal Report
    2. Create a new connection using ODBC RDO
    3. Drill into DSN Name->DB Name->dbo->Views. Only the first 200 or so views in alphabetical order are listed on Available Data Sources on the left pane.
    I am using SQL authentication and sa account to connect to SQL. So security should not be the problem. I can also use Access 2003 linked table to see all the views in my SQL server.
    Is there a restriction on how many views can be listed in Crystal Data Source? Is there another way to add data source to Report without using Database Expert?
    Thanks in advance!

    Youdao,
    There is a default limit of 8000 objects that Crystal will see in the database.
    I would suggest right clicking on your datasource and selecting Options. In the Data Explorer uncheck Tables and Stored Procedures leaving Views selected > press OK > then right click again and refresh.
    If the limit was being reached then you should now see at least more Views if not all.
    The default limit can be edited in the Registry (*Always recommended to back up the registry before editing).
    The key is HKEY_CURRENT_USER > Software > Crystal Decisions or Business Objects > (version number) > Crystal Reports > Fetch options > NTablesMax

Maybe you are looking for

  • Ipad4 connection MTP USB device error with Windows 7 64 bit

    I have recently bought iPad 4. When I connected to my computer through USB running Windows 7 Professional 64 bit  i got the following error message "MTP USB Device  failed to install" Please guige me

  • GL Account for wire payments - Can it be changed

    We use a specific account for all wire payment clearing when a payment request is created. Please advise if there are any exits/enhancements which can be leveraged to use a different account for the payment request clearning account. Thanks. Chaitany

  • Setting dynamic profile values in R3.0

    Hi Using the SDK can we set up profile values dynamically for use with Bursting. Currently it seems I have to define the profile values manually for each user and group or can use only the username, email or fullname for dynamic purposes. What i want

  • Apple id showing up on another phone

    my husband and i each have an i phone, each with our own apple Id,  but my apple id is showing up on his phone.how does this happen and how do i fix it

  • [SOLVED][Bluetooth Headset] Speaker works great, microphone not :(

    Hello everyone, Thanks to this topic, I manage to have ALSA recognize my bluetooth headset correctly (originally I use it on my phone, works great). My problem now is : the speaker part is working correctly (I can hear sounds coming from mplayer or a