Can we see cc person in wrokflow list

We are using #WFM_CC attribute to send a copy to users but we are not seeing the notification in CC'ed person worklist.
Is that,We can only see the notification in user's mail..?

The #WFM_CC attribute is applicable only for email notification, but not valid for worklist
#WFM_CC - Define this attribute to specify one or more secondary recipients for a notification e-mail message. These recipients are stored in the CC (Carbon Copy) field of the message header.
You can refere to the workflow Developer guide for more details
http://docs.oracle.com/cd/E18727_01/doc.121/e12905/T361836T361983.htm

Similar Messages

  • Can not see my Airport in the list of Wifi networks and is blinking organge all the time

    Can not see my airport on the list of WiFi networks and is blinking orange all the time. Tried to reset several times.

    Do you have a Mac or idevice for setting up the Express? It does require a later utility than is available for windows.
    You might be able to setup with the v5 utility in windows but there is no guarantee.
    You should use a simple name both for the base and the wireless. eg AEXgen2 base name and AEXwifi for wireless name.. that is if you get access.

  • Assign Task is assigned to a specific user but the she can not see it in her ToDo list

    Hello,
    I am currently working on the first process (after upgraded it to LC ES 2 with SP2) and try to test by routing it to the next person but the user could not see it in her ToDo list nor receive any Task email.
    I checked for the process in the AdminUI and see that it is currently assign to that user and also check the email configuration but do not see any thing wrong. I also recorded it and see it is assign to that person. I then try to re-assign it to a different person but it still does not show in the next person's ToDo list. So I go to the log file and see there is an error as below:
    00000078 UserServiceIm W com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl createTaskFromDialogProperties WARNING!!! You have not specified any Form TLO/DCI settings, and have not specified any input data.  This task will be created without any form.Process: 1515F/1515F, Step Name: AssignTask0
    I tried to search for the error above but could not find any thing reference to it.
    Can any one please advise on how to fix it so the user can see it in their ToDo list when the task is assigned to them.
    Thanks,
    Han Dao

    Hi
    It sounds like you have not selected anything on the Presentation & Data tab of the Workspace Startpoint/User Service.
    You need to specify:
    Your Asset (the form you want to present to the user)
    An associated Action Profile (tells the server how you want the form rendered...typically it is set to Default which uses the Render PDF Form process)
    The variable to hold your data(typically an xml variable)
    Make sure these are set.
    Diana

  • BBM on OS7 can't see others Personal Message

    First time poster as I've been able to fiddle my through issues in the past, this on has me baffled.
    I can post a Personal Message and others can see it, I can't see others in their profile. I was on a BES in the UK and due to issues this week had to activate on a other one in the USA. Had to move back and forth a few times (painful) and the lasy activation they went missing.
    Deleted BBM
    Battery pull
    Re installed BBM
    Same issue
    Thoughts?
    Gary

    Sorry, but what "network list" are you referring to? Are you referring to the iTunes Home Sharing feature? If so, perhaps this will help:
    http://support.apple.com/kb/TS2972
    Regards.

  • Can I see my to do`s list from ical on the iphone?

    I use iwork 08 and I allready have a to do list on my ical, but in my iphone after sync I only see my calendar, contacts, etc. but not my to do list. How can i see it?

    I use a combination of Toodledo.com (a free online To Do manager, though I upgraded to their $15/yr "Pro" service) and an app for the iPhone called "Todo" (oddly enough) by Appigo. This iPhone app syncs perfectly back and forth to Toodledo.com and of course you can manage your to do list via Safari on your Mac or any browser from anywhere (like Internet Explorer at work, airport, etc). It costs $9.99 from the iTunes store, but its well worth it. Less structured than OmniFocus (which is overkill for me) and works via the web so I can access my data from anywhere on any device.
    Also, through Toodledo.com you can subscribe to a shared iCal calendar that contains your To Do list - so, while you can't edit through iCal (must edit on the web at toodledo.com or on your iPhone via Todo or the toodledo.com iPhone-specific webpage), you can SEE your to do list on the side pane of iCal.
    Works very well, actually. At the least I can see my to do list when iCal is open, and the web app is very easy to use. And Appigo's iPhone app Todo is very well written and has a great interface. There is also a Dashboard widget you can download that lets you manage your to do list.
    And Appigo also has an app called Notebook which also syncs notes back and forth to Toodledo.com ($4.99 I believe from iTunes).
    (I have no relationship with Appigo, but I did buy both of these app and I think they're well worth the price).

  • How can I see my iphone 5 phone list on my pc and edit?

    HOW CAN I SEE MY PHONE LIST ON MY PC?

    What do you mean by "iPhone List"? You can see what's on the phone if you have iTunes on your computer and connect the the phone to the computer.

  • How can i see events in iPhoto in list form?

    I just got an iMac and have imported all my photos from my PC to iPhoto. Now I want to view the "events" in a list form, but can't see how to do that and can't find any info in Help or the user interface. Anyone know how to do this?

    Go to the Photos mode and in View enable Event Titles:
    Then you'll get this type of list:
    To open or close all events at one time Option-click on the triangle at the beginning of the Event title.

  • Can't see the ECC 6 infoset listed from CR 2008

    Hi there,
    I think I went over all CR/ ECC6 integration steps but I still can't see my InfoSet when I run the wizard from CR 2008...I m getting NO error just no InfoSet listed under Global or Local tree
    Any input will be helpful!
    Thanks,
    Fouad,

    Hi,
    is your SAP account assigned to the InfoSet user group ?
    ingo

  • I can't see the person I am video chatting with...please help me

    I am using IChat with my iMac. My mother is using AIM (newest version) on her Windows PC.
    She or I can initiate the video chat invitation. However, once the video chat starts she can see me on her monitor but I can not see her on mine. On my monitor all I see is what MY built-in isight camera shows me (ie myself).
    Any help as to why I only see myself and not her? Is it a problem on my end or hers? Thanks.

    Hi
    Your post seems to have gone unnoticed by the regular problem solvers, so I'll bump it up the list with a request for clarification.
    You say your mother is using the latest version of AIM on her PC. If that means AIM Triton, it won't work. She needs AIM 5.9 instead. She will also need to enable AIM through the Windows XP firewall.
    If that's not the problem, try to give a bit more info on the set-up - make of modem, connection speed, etc.
    Dave

  • The TOC is very confusing. How can I see the page showing the list of chapters and accompanying pages?

    The TOC is very confusing. How can I see the whole list of all the chapters, as it would appear in a book? I only can see a vague image of the chapter title, and only from one chapter at a time; the chapter I am on. In the instruction example it shows also only the "title" of the chapter it pertains to, but it is all in legeable text. The inspector gives options, but it does not explain how to apply it, and I cannot see what my option will look like and to what part of the "text" it is referring.

    The "lower rectangles" are thumbnails of the actual pages in your book... the text was presumably the content of your book. IF you did as I suggested to keep the TOC listing of a full book.. but removed content on all except the three chapters you want to send off to XXXXX -  then the "rectangles are showing blank pages. Which is normal.
    You need to understand that Apple created iBooks Author to create a book which can be obtained from their iBooks store. The application is flexible for customisation to a large extent and the innovative make use of that flexibility. The TOC basically replaces the old Index in printed books to advise readers what content is available.
    On an iPad, or Mac now, Insterad of using  "hyperlinks" from a written index page... which is basic web page navigation - Apple chose  to have a visual TOC.
    Basically you  have to decide - create a three chapter sample which you seem to require - which will show the TOC as it is, or  if you the whole TOC of the finished book is required to show... but  not the content, you end  up with blank "rectangles".  
    Screenshots oniPads... press the  top right start button and the  lower centre,  home buttom together and it  makes a screenshot. Transfer to your computer ( email or Dropbox type cloud) and  add to your post.

  • Can't see the person I am video chatting with but they can see me?

    I use iChat 3.1.9 and when I video chat I can only see myself and not the person I am chatting with? The other person can see me but I can't see them? In the past there would be two boxes that showed the other person (larger box) and then myself (in a smaller box). Any tips on what to do?
    Thanks

    See my reply in the other thread
    http://discussions.apple.com/thread.jspa?threadID=2072155&tstart=0
    8:16 PM Wednesday; July 8, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Can't see other Short Names in list

    Hi All,
    I couldn't find any info on this problem: in OS X Server 10.4.9 WGM, a few accounts have more than 3 short names, the maximum that will fit in the little short name list window. Scrollbars used to appear when a name was clicked, allowing scrolling to the additional names. Now they have disappeared from some accounts (not all.)
    I checked with the Inspector and they are indeed there, but I can't see them through the normal manner. Reconstruct the user? Any other ideas?
    Thanks. Any info is much appreciated.

    One way is to play a song's preview and note the information displayed in the iTunes progress bar.

  • Can't access title inspector. I can only see the left half that lists the names of all the settings but cannot see or adjust any of the settings like font size or color. I can click on a triangle and expand a setting but can't see setting or change it.

    This screen grab actually cuts off the right side a little bit but this is basically my issue. I can move the whole window but I still can't see or access the parameters for each of the title settings. Is this just a bug I have to live with until Apple fixes it or does anyone have a solution?

    I'm on a MacBook Pro with a 15.4" screen. Resolution = 1024x768 (stretched).
    I've tried moving the window but it cuts off the inspector in the same place and I am unable to resize the width of the window.

  • I can't see camera in HH2 devices list.

    My IP camera is connected via hardwire ethernet cable to the Home Hub 2 and is accessible via desktop and Ipad.
    In desktop help "view my network" it is there with its IP address.
    In settings in the HH2 devices it isn't, but the desktop (ethernet) and ipads (wireless) are.
    I am positive it once was listed but when I came back from hols it had gone and there was a message about lease expired on something or other but I still could access the connected devices.
    Why can't I see it in devices conmected to HH2. Cheers.

    Its a common problem with the home hubs 1 and 2. If the IP lease expires, it will vanish from the list intil the next time the device requests an IP address. Its best just to ignore it, if your camera is working.
    If you restart you camera, it will probably appear again on the list.
    You can overcome this problem by giving the camera its own static IP address.
    See Using static IP adresses
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Video calling can't see the person face clearly

    Using Lumia 535, the person that use skype can see me clearly but I see her in double aspect ratio sound like see a big face in front of me. Who can tell me what's going on with my phone?

    See my reply in the other thread
    http://discussions.apple.com/thread.jspa?threadID=2072155&tstart=0
    8:16 PM Wednesday; July 8, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Maybe you are looking for

  • How to stop Syncing

    I just got my 3Gs. I also bought a USB desktop cradle which charges my iphone and connects it to my pc. My problem is that every time I finish a call and put the iphone back in it's cradle, it launches iTunes and the resyncs. I don't want this. My co

  • Wake issues with 24" iMac

    I am having the issue with my iMac lab. Units will go to sleep and when a student tries to use the unit there is no response from keyboard but mouse will respond. They need to be restarted to resolve the issue but should it go to sleep again we start

  • Getting Error in AppPart "The feed you've requested does not exist."

    I am getting " The feed you've requested does not exist." Error while app-part is getting loaded on a page. It works well while we open the app alone. The feed we are using is Yammer feed. Ashish Baranwal || To know what you know and what you do not

  • Storage location on MRP-list

    Hi! I am trying to add Storage Location to the Purch.Requisition during a MRP-run. What prerequisites are necessary in order to achieve this? The business scenario is StockTransportOrders from Plant to Plant, where we want the storage location of the

  • BPC75NW: How to generate list of accounts with a specific prefix

    Hi Experts, I need to generate a list of accounts (to be scoped in LGF script file) starting with 'A_'. How do I acheive this in BPC7.5 NW version ? Regards, Pankaj.