Can we see performance score at reports column in OATS?
We've installed OATS and OAT Administrator to PC, and tried to do performance testing and show/read some score measurement at reports column, which will be generated by running 3rd party script. In OATS reports column, we can only see pie chart and bar chart for the passed, failed information from running tests, or the running statistics among 3rd party test, manual test, and oracle OpenScript test.
I am asking how to show the performance measure results (like accuracy, F-measure) from running 3rd party script on reports column graph?
We also need to see comparison charts which shows the performance difference between two days or more testing results.
Can we do this with reports site?
Thank you,
Jason
Edited by: 900021 on Nov 30, 2011 2:10 PM
please check DataSource Hierarchy: 0PS_OBJNR_HIER & DataSource Attributes: 0PS_OBJNR_ATTR.
otherwise i think you can go for development.
lets see others comment.
thanks
Sunil
Similar Messages
-
How can i see Log information of Report Run Time?
Hi Gurus,
How can i see Log information of Report Run Time?, till now i am counted report run time manually. Is there any way i can see the workbook running time in log information?.
Thanks & Regards
VikramThere could be a few things -
At one time, you needed to run a separate script to create the tables. I'm not sure that is still the case. If you check the Administrators guide, look into the chapter that deals with the EUL Status Workbooks.
If you are not logged on as the eul owner, you may not have select privileges, or you may need to qualify the table with the schema (if there is no synonym) - select * from <eul_owner>.EUL5_QPP_STATS;
If you are on 4i, the table is EUL4_QPP_STATS -
How Can I see the CO-PA report
hi sap experts,
how can i see the CO-PA report and in detail configuriation,
and controlling reports.
Advance Thanks,For executing COPA - Tcode is KE30 (for define change etc... KE31 to KE34)
Standard reports available in controlling sub-components under information system
Regards
Radha -
How can i define the width of report column in report region ?
Hi,
I have report region and i want to have a static width for each column ( not based on column name of column data ), how can i do it ?
Thanks in advance ,
YoelCan you provide more details pls? I am also trying to change widht of report columns and I do not see anywhere in reports atrributes where it allows me to do that...Thanks so much!
-
How can I see the heading of a column, whilst at the bottom of a document?
I'm doing a long list of expenses, and the headings are at the top of columns. Now I've filled in many rows, I have to go up and down the page to see the heading make sure that I fill the correct column in. Is there a way of splitting a document across the middle (or something like this) so that I can always see the heading at the top of the column even though i am way down the page?
thanks so much - NigelHello
There is a really simple workaround
Duplicate your table and, in the copy, remove every rows minus row 1 thru 7.
You will be able to leave the new table (name it "header7" for instance) at the top of your screen
and put the main one just under it.
Doing that, you will be able to scroll in the main table.
If the contents of the seven top rows may be modified.
Replace the contents of the cells in header7 by a formula looking like that:
A1 =mainTable :: A1
So the changes in row 1 thru 7 in mainTable will be reported in header7.
Yvan KOENIG (from FRANCE lundi 7 janvier 2008 18:31:14) -
Not sure how much clearer I can be.
Windows XP version 5.1 with Service Pack 3
Firefox Version 22
Can not view Firefox Health Report even thou all selections are made for this to happen
I share data with MozillaIf Firefox is crashing we need the Crash IDs that are obtainable from ''about:crashes''. The crash IDs start with ''bp-''
Standard reply:
We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
#Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
#Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article. -
Can I see the score for a song I hummed into GB? How?
I hummed a tune into GB and now want to see the score for this tune so that I can create instrumentals to go with it. Can it be done? How?
Thanks.
MAmaryannfromwestminster wrote:
What is Logic (the program not the concept) and where can I get it?
it is Apple's "high end" music software, you can find it here: Logic Studio Retail -
Bad performance when deleting report column in webi(with "Design – Structure only")
Hi all,
One of our customer has recently upgraded from BO XI to BO4.1. In the new BO 4.1, they encountered a bad performance issue when they were deleting a column in Webi(using "Design – Structure only" mode).
With “Design – Structure only" mode, it took webi about 10 seconds to complete after the customer right-clicked a report column and clicked the "delete". The customer said that they only need to wait for less than 1 second when they did the same in BO XI old version.
The new BO version used is 4.1SP02, installed in Windows Server 2008 R2. (Server with 32 core CPU, 32G memory)
This bad performance happened in both Webi web and Rich Client. (in Webi Rich Client, the performance is a little bit better. The 'delete column' action takes about 8 seconds to complete).
Do anyone know how to tune this performance in webi? Thank you.
Besides, it seems that each time we are making change in the webi report structure in IE or Rich Client, webi need to interact with Server site to upload the changes. Is there any option to change this behavior? Say, do not upload change to Server for when 'deleting report column', only trigger the upload after a set of actions(e.g. trigger when click the "Save" button).
Thank you.
Regards,
Eton.Hi all,
Could anyone help me on this? Thanks!
What customer concerns now is that when they did the same 'column editing' action in BO XI R2 for the same report, they did not need to wait. And they need to wait for at least 7-8 second in the BO 4.1SP02 environment for this action to complete.(data already purged, in structure-only mode)
One more information about the webi report being editing is: there are many sheets in the report(about 6~10 sheets in one report). Customer don't want to separate these sheet into different reports as it will increase the effort of their end users to locate similar report sheets.
Regards,
Eton. -
Can't see my score result online
Hi
I passed the 70-640 exam in November in a Prometric exam center and I have the printed result and the candidate number. but I want to see my exam results and the certificate on the Microsoft website. how can I see that?Hi,
Do you have a live account? Your live account is linked to your MCP account and when you login on below link you can see your score only when your exam was scheduled under your own MCP. If this is not the case and you did not booked the exam with your
own MCP, you need register the exam under your own MCP. To fix this call Microsoft they are very helpfull. You can also check your score on the prometric site with your prometric logins.
For login MCP, see
https://mcp.microsoft.com/
Regards,
Reshma
Please Vote as Helpful if an answer is helpful and/or Please mark Proposed as Answer or Mark As Answer when question is answered -
SMARTFORMS gurus: I can't see zeroes in my report !!!
Please respond me ASAP. I can't see zeroes in my field numbers in a report. In this case is necessary to see the zeroes when they appears.
<b>I've proved with every solution without success</b> (Formating Options, one by one; SMARTSTYLES, etc).
Actually, when the variables get zero, they dissapears (blank).
Please help me !!!!, and thank you in advance.I have this happen in reports where the dict def. supresses the zeros. Below is code I use. Hope this helps.
DATA: lv_all_zeroes(18) TYPE c VALUE '000000000000000000',
lv_len TYPE i,
lv_fieldsize TYPE i,
lv_material LIKE mara-matnr.
put the zeroes back in front of the material
lv_material = mara-matnr.
lv_len = strlen( lv_material ).
lv_fieldsize = 18 - lv_len.
SHIFT lv_material
RIGHT BY lv_fieldsize PLACES.
OVERLAY lv_material
WITH lv_all_zeroes ONLY space.
mara-matnr = lv_material.
This has worked for me in the past. -
Can't see demo 'Using Oracle Reports with Oracle JDeveloper'
Hi,
I can't see this demo :
http://www.oracle.com/technology/products/reports/htdocs/getstart/demonstrations/JDEV1/index.html
I have this java error :
viewletUrl_: http://www.oracle.com/technology/products/reports/htdocs/getstart/demonstrations/JDEV1/rep9i_jdev9i_part1.viewlet
java.lang.NegativeArraySizeException
at leelou.viewlet.a.a(Unknown Source)
at leelou.viewlet.QViewApplet.readViewlet(QViewApplet.java:125)
at leelou.viewlet.QViewApplet.<init>(QViewApplet.java:107)
at leelou.viewlet.vcr.QVCRApplet.init(QVCRApplet.java:213)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
I have to create a custom destination for Reports in JDeveloper, but I don't find starter doc (for JDeveloper).Hi,
Unfortunately this demo is one of those old demos which have technical problems with new IE + JDK versions, so we had to take it off. The link to this demo is no longer available on OTN:
http://www.oracle.com/technology/products/reports/htdocs/search.html?cat=INT&col=DEM&submit=Search
You may have bookmarked it. If it is available on any OTN page, pl let me know.
For Oracle Reports integration with JDev, pl see the tool / utility available at this page:
http://www.oracle.com/technology/products/reports/htdocs/search.html?cat=INT&col=UTI&submit=Search
This tool/utility is currently available with 10g (9.0.4), and has not yet been tested with 10g R2 (10.1.2).
But if your objective is only to use to use JDev to develop a pluggable destination, you may want to see the pluggable destination API documentation available here, which can be developed with any tool including JDeveloper:
http://www.oracle.com/technology/products/reports/apis/plugDestination/index.html
Some plugin destinations and their source code is available here for reference. As you can see, its pretty straightforward - most of these samples have just a few lines of custom code:
http://www.oracle.com/technology/products/reports/pluginxchange/index.html
Of course JDev-specific starter tutorials are available here:
http://www.oracle.com/technology/products/jdev/index.html
Navneet. -
I play scrabble free and the screen shrunk so I can't see the score at the top
I play scrabble free on I Pad and the screen shrunk in the game just enough so I cannot see the score at the top.
You may have Zoom turned on. See:
iPhone and iPod touch: Home screen icons are magnified or large -
How can we remove link on a report column?
Hi All,
Can anyone suggest how to remove a link created on a column?
Thanks in advance,
AnnieHi Annie,
I'm not quite sure what you mean so sorry if this doesn't help but...
Go to report attributes, click on the edit icon (there should be a tick by it to show that its a link) by the column name and you will see the link details there. You can just delete them there.
Is that what you meant?
Cheers
Ben -
Cannot see an image in report column
Hi i have an sql report as
select htmldb_item.checkbox(1,a.id,DECODE(a.olokl,'Y','CHECKED',null)) aa , a.id dd1 ,
a.created_date ,
c.name ,
a.eponumia ,a.subject ,
decode(nvl(a.filename,'0'),'0','','<img src="/i/view.jpg" border="0" alt="Icon 1">file_for_dl') download ,
a.del_date,
b.id as money_e,
a.olokl oloo
from ekkremothtes a ,
HTMLDB_APPLICATION_FILES b,
kataxorites c
where b.name(+) = a.filename
and a.auth_id =c.id(+)
and when a filename
exists it shows the img and the text[b] file_for_dl in the col download.
else it shows null.
and based on that column i created a link
as
LINK TEXT : #DOWNLOAD#
TARGET URL
URL : p?n=#MONEY_E#
but the download column when a filename exists shows only the text file_for_dl and not the image
Any idea where i am doing it wrong ?
Regards Aris_dc<br>1) Download image through Shared components|Images into application workspace (picture.png is the name of that picture)
<br>2) later reference as "#APP_IMAGES#fpicture.png"
<br>Example shows how 2 pics are displayed depending on STATUS field value which is part of table MyTable:
SELECT
DECODE("STATUS",
0,'<_img src="#APP_IMAGES#fb_stop.gif" />'
,1,'<_img src="#APP_IMAGES#fb_run.gif" />') "STATUS"
FROM MyTableRemove "_" before image...this is needed for correct display on WEB in Appex forum!
Here pics are shown:
<br>"b_stop.gif" if STATUS=0
<br>"fb_run.gif" if STATUS=1
Hope this helps! -
My iPod touch running on IOS 4.2.1 is fine but the gamecentre won't work, on the games it shows I don't have any games but on me it says I have 50 games. How do you fix this? Please help me!
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the followingwill replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit
It is very likely the jack is causing the VC problem since VC uses the jack for input.
Maybe you are looking for
-
New Certification blog and new magazine about certification
Dear Oracle Certification addicts Please consult the following blog http://blogs.oracle.com/certification/ I did really appreciate the To Certify or Not to Certify topic is it quite good. Especially that Note to Hiring Managers: Just as candidate sho
-
OK WE HAVE DONE IT AN ORANGE PROTECTIVE SCREEN OVERLAY FOR IPOD AND IPAD STOPPING JOHN'S SEIZURES AND STOPPING EYE PROBLEMS WITH USAGE ABLE TO CUT ANY SIZE FOR PHONES EG Contact me Steve the idea is great and the pictures are reveal a better depth pe
-
Installation of solaris 10 on 2 similar sparcs
Hi. I have 2 t5120 sun enterprise systems. One is complete installed and RAID -1 was configured using hardware raid- raidctl on both systems. I wanted to know if there is an easy way I can just take out the second disk (disk in right side slot when I
-
Best PPI for Creating New Image in Photoshop
Hi, Bunch of questions - all in BOLD. I am somewhat new to CS5 and have been playing around with making art in it. Yesterday I created a piece of art simply by selecting 6 inches by 6 inches in the dialog box (because I was thinking of just printing
-
Total number of (own) post in profile?
I'd like to know how many posts I have made here. Cold you please add an entry to my profile main page (where is see my points too)? For me there is no need to hide this property from other users but someone may not whish to show this to the world...