Can we see value of CKF in exception cell in query designer-please reply

Hello all,
I am defining a query in query designer in which i am using the exception cells, I am having two structures in this query. Now at the intersection of these two structure on one particular line I am trying to define the properties of that cell. I selected new selection and after that I added the calculated key figure that I had created. So should that cell show me the value of the calculated key figure (that is what I thought, that if I can put my CKF in that cell it will show me the value for that CKF). I am seeing different results.
Is there any way you can actually show the value of calculated key figure in that particular cell.
Thanks in advance,
Raj

Hi Raj,
You can add Calculated key figure,RKF and even single key figures .The cells are independent of each other and that should not be an issue.
Whatever the key figure is in the cell it should show that value.
Just check again whether you have put any key figure into the selections of the structures
There should be no key fgures into selctions.
Hope it helps
Thanks

Similar Messages

Can't see values of the navigational attrbute

Hello, experts!
Need your advice - I created navigational attribute on master data onfoobject. I populated and activated data for this navigational atrtibute and also ran Attribute Change for my cube. Still I can't see values of this navigational attribute when I ran BEX reports. Any suggestions - what step is missing?
Thanks a lot!
Alina.

Hello Alina,
To make attributes available as navigation attributes in reporting, you need to enable them on the InfoProvider.
Otherwise, the attributes function as display attributes.
So there are actualloy two places where you need to define a naviagtion attributes
1. In the Info Object maintenance where you would check the box to define your naigational attribute.
Once this naviagtional attribute is saved , it is available for iinput in your Info provider maintenance Screen.
2. So , Input this navigation attribute in teh ionfo provider maintenance Screena nd save and activate.
Now you will eb able to see this.
Regards,
Tapish

I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.

I can't see the person I am video chatting with...please help me

I am using IChat with my iMac. My mother is using AIM (newest version) on her Windows PC.
She or I can initiate the video chat invitation. However, once the video chat starts she can see me on her monitor but I can not see her on mine. On my monitor all I see is what MY built-in isight camera shows me (ie myself).
Any help as to why I only see myself and not her? Is it a problem on my end or hers? Thanks.

Hi
Your post seems to have gone unnoticed by the regular problem solvers, so I'll bump it up the list with a request for clarification.
You say your mother is using the latest version of AIM on her PC. If that means AIM Triton, it won't work. She needs AIM 5.9 instead. She will also need to enable AIM through the Windows XP firewall.
If that's not the problem, try to give a bit more info on the set-up - make of modem, connection speed, etc.
Dave

Can't see or reference table generated by 'Make Table' query.

Hi,
MS Access 2013 --
Not really a programming question per se, but, if I create a query in the MS Access user interface, I cannot reference it; neither can I see it in the Access Objects List, nor can I see using the Objects Search Bar. I have observed this behaviour
numerous times. This seems to be somewhat like SQL 2008 SSMS which requires a refresh at the parent object level before you can see, for instance, a stored procedure you've just created. But, in the MS Access case, the only seeming solution is to open
and close the program. . . .which isn't an actual solution when this is a frequent occurrence. Any thoughts?
Jim

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"
George,
Please explain why you marked your post as "answer" rather than mine. I gave the same advice to update Office 2 days before you. How do you justify your actions? Here is a copy of your post where you advised the OP to follow my suggestion.
Chris Ward

Exception in BEX Query Designer 7.10 when restricting dataprovider in filte

Hello,
when I build a query in the Query Designer 7.10 and try to restrict the infoprovider in the filter
to access a mulitprovider I get the exception:
"Unhandled exception has occurred in your application.....
Index was out of range........"
Our System:
Windows XP Servicepack 2
.Net 2.0 Serivcepack 1
Office 2003
SAP GUI 7.10 Patchlevel 9
BI Addon + Serivcepack 7
BW 3.5 Addon + Servicepack 4
Netweaver 7.00 packagelevel 11
Has anybody seen the same erro or a oss note which fixes this problem?
Thanks.
Regards, Lars.

Hi,
I have not encountered this problem in the last days. We have made an upgrade
in the support package level from 11 to 16 for Netweaver Basis and 12 to 18 for
Netweaver BI. Sometimes there can arise problems when the support package level
of the Application Server is to low in comparision to the SAP GUI.
Maybe this was the problem. I am not sure.
I would advise you to install the latest upgrades of your SAP GUI and keep the application
server on a high support package level.
Sorry, I can't give any other hint.
Regards, Lars.

Problem with exceptions in the query designer

Hi all,
i got this problem, there is a formula, than calculate "A" %A "B", This bring a value %, ok.
in my exceptions i got this ranges:
1 to 99,4 Bad 9
99,5 to 100 Good 1,
i execute the query and this bring the results, when there is a line with value 99,5, this appear without color, the rest is ok,
why this happend? whats the solution? please guys, i'll award you

i m sorry the values are
0 to 99,4 Bad 9
99,5 to 100 Good 1
i solve it by this way
0 to 99,49999999999 Bad 9
99,5000000001 to 100 Good 1
i looks like the internal value of the KF is with a lot of decimal, the problem here is, when the value is 99,5 exactly, dont appear color, but i dont know how else solve it, any advice?

How can I know, which RFC connection is used by my query designer ?

HI,
I would like to know,
which RFC connection is used when i launch the query designer or the report designer or the web designer.
Thanks.
Guillaume

Hi,
Go to TCODE SM59 and see.
Regards
Nilesh

How can we see previleges assigned to all users using database query

I am using the follwoing query to see previleges assigned to all users , but the suprising thing is that it shows GP_APP_ID as null for a large number of user , even though in discoverer administrator I can see the previleges assigned to those users. I do not understand why it does that. Can someone please help so that I can see the previleges of all users
select unique EU_USERNAME, decode (GP_APP_ID ,1000, 'Desktop / Plus Privilege (U)',
1001, 'Create / Edit Query (U)',
1002, 'Item Drill (U)',
1003, 'Drill Out (U)',
1004, 'Grant Workbook (aka Sharing) (U)',
1005, 'Collect Query Statistics (U)',
1006 ,'Admin Privilege (A)',
1007, 'Set Privilege (A)',
1008, 'Create / Edit Business Area (A)',
1009, 'Format Business Area (A)',
1010, 'Create / Edit Summaries (A)',
1011, 'Not used as far as can be determined',
1012, 'Schedule (U)',
1013, 'User is never required to schedule workbooks (U)',
1014, 'Save workbooks to database (U)',
1015, 'Managed scheduled workbooks (A)',
1016, 'to 1017 Not used as far as can be determined',
1018, 'Change Password',
1019, 'to 1023 Not used as far as can be determined',
1024, 'Create Link (U))') from
EUL5_ACCESS_PRIVS A,
EUL5_EUL_USERS U
where A.AP_EU_ID=U.EU_ID
order by EU_USERNAME
thanks

Hi,
This is probably because the business area security is stored in the same table. So you will probably find that where GP_APP_ID is null then GBA_BA_ID holds the value of the business area. You should change your query to just select where GP_APP_ID IS NOT NULL.
Rod West

Exceptional Aggregation in Query Designer

Hello Gurus,
we have an existing Report at the Material Level on the InfoCube.
Each Material may have multiple POs and we are having multiple
records for each PO varying the date. Now the user want to view
only the record latest changed Record at the PO level
and Sum of all the records at the Material Level.
For this i have created a CKF using the Exception Aggregation
as Maximum for the 0calday. But client want the Report at Material Level
he dont want the PO's details. When i remove the PO from the report
it gives the result for only the latest PO not all the PO for that Material.
For Example we are having below records in the cube.
PO             Material     Calday       Qty         Price
101            ABC          1/12           100         10
101            ABC          2/12            100         10
101            ABC          3/12            100         11
102            ABC          4/12           100         10
104            ABC          5/12            100         10
103            ABC          7/12            100         11
I am getting the result with PO in Rows as Below
PO             Material     Calday       Qty         Price
101            ABC          3/12            100         11
102            ABC          4/12           100         10
104            ABC          5/12            100         10
103            ABC          7/12            100         11
When I remove the PO's From the Rows then it will display
as below i am placing the calday for under standing the
question actually it is not present in the output of the below report only.
        Material     Calday       Qty         Price
          ABC         7/12          100         11
Which is not currect I have to get the Result as
Material            Qty         Price
    ABC              500         42
My Concerns:
!. Kindly let me know if it is possible and what are the
other things that i need to consider.
2. Did it will impact the performance.
Waiting for your quick replies
Thanks & Regards
KK
Edited by: KK on Dec 23, 2009 11:08 AM
Edited by: KK on Dec 23, 2009 11:15 AM
Edited by: KK on Dec 23, 2009 11:22 AM

Hi KK
Confirmation:
First I need to confirm one thing,
as you mentioned expected output is,
Material            Qty         Price
    ABC              500         42
But I think, it should be
Material            Qty         Price
    ABC              400         42
right?
Answer:
Can you please try below steps and let me know whether it is working as expected or not
Create a basic Key figure for calday and include it in your InfoCube. In the transformation, assign it to same fileld which is a source of calday.
In query, Create a calculated key figure based on calday key figure with exception aggr as last value and reference characteristics as PO.
Regards
Rohit

When downloading is complete, I can not see, run, nor access the file; it only appears in the "Downloads" window (and not the specified folder) and the only options permitted are to delete it, or to go to the download web site; what's blocking it?

My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and the only "Right Click" options permitted are to "Remove From List", "Select All", & "Copy Download Link" I also can not double click to run it. What's blocking it?
I have a similar problem when accessing .zip files that are attachments to my emails. Here, however, I can place the file in a designated folder, however, the .zip file and it's compressed content files are file-typed as "FireFox Document" and I get permissions errors when running an unzip tool.
Why are my download files being quarantined ??? Is there a security setting option I need to change???
To get around this, I'm using IE to download and install these files, but switching back & forth between FireFox & IE is a real pain.

It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''

Can't see code in design mode

I am a complete novice when it comes to DW so please forgive
my ignorance. For some reason the code between my h tags and the
the navigation is not visible to me, so it looks like huge chunks
of my code are missing. Please can anyone help?
Thanks in advance.
Slooshy

Let's see your page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"slooshy" <[email protected]> wrote in
message
news:g28pm9$896$[email protected]..
> I'm sorry I don't think I explained myself properly. The
problem I am
> having is
> in code view. The code between the h tags is invisible,
so I can only see
> what
> text is there by looking at the design view. This is
also true of the text
> in
> my navigation too.
>
> Any advice is much appreciated.
>
> `
>
>
>
>
>

How can we see restricted key figures in Portal

Hello,
We are using 0ANALYSIS_PATTERM template, when we use the "new analysis" and from the drop down at the top (view, query, infoprovider) when we choose the infoprovider as a cube for example (0PU_C02) we can see pretty much like a web version of query designer i guess, we can see all the objects. But is there any way the end user can see the restrcited key figures that are created in the query designer by BW developer, so that they can drag and drop their objects and create a report.
It would be great to have this function.
Thanks,
Kiran

Currently, this is not available. You could have a query that has all RKF as a starting point to achieve this. If you think this would be good to have by default, please log a development request on the OSS Messaging System.

We can't see migrated files in Repository

We made a Reports migration with BIPBatchConversion Utility and now, we can't see the migrated reports in BI Repository.
Could you please, help me in WHERE we must copy the files generated with the Utility and HOW can we Upload them?
Thanks in Advance.
Regards,
Valeria
p/d. We follow the note: http://download.oracle.com/docs/cd/E10383_01/doc/bip.1013/e10416/convertrpts.htm

Hi pkregel,
Do these files open as intended in Dreamweaver CS6? I am not a CF expert but I am guessing that if you are able to open the files, then you should be able to see them in both the views. Can you post a screenshot as well?
Thanks,
Preran

When I use Facebook on iPad I can't see anyone's profile pictures what should I do to fix this?, When I use Facebook on iPad I can't see anyone's profile pictures what should I do to fix this?

I can't see anyone's profile pictures while using Facebook on iPad please help me

Did you get this fixed? I have the same problem.

Can we see value of CKF in exception cell in query designer-please reply

Similar Messages

Maybe you are looking for