Can we separate the profiles into different Window...

I'm talking about the profiles pictures/webcam that resize themselves based on who's talking. I'm trying to stream and I need to pull two people's webcam off of the Skype call page but when it constantly resizes itself it makes it terribly difficult. Is it possible to turn off the resizing functionality or separate the webcam feeds into separate Windows?

Switch the Dynamic View mode off:
http://community.skype.com/t5/Windows-desktop-client/Side-by-side-by-side/m-p/3493187#M291278

Similar Messages

  • Can we send the data into different data target from single datasource how

    Hai
    can we send the data into different data target from single datasource how ?

    Hi,
    Create the transformation for each target and connect through DTP if you are in BI 7.0
    If it is BW 3.5 create transfer rules and load it Info source and then different update rules for different targets then load it using IP.
    If you are speaking about loading data from R3 data source to multiple data sources in BI
    Then follow the below step.
    1)create init IP's and run the IP's with different selection to different DSO(With same selection it is not possible).
    2)Then you will have different delta queues for the same data source in RSA7
    3)Your delta loads will run fine to different data sources from same DS in R3.
    Hope this helps
    Regards,
    Venkatesh

  • Can we separate the mailboxes into a separate directory in CE

    Can we separate the mailboxes into a separate directory in communication express 6.2?

    navvith wrote:
    we are using some other product which is combined with Communication express.. What "some other product"? I cannot help you if you continue to be extremely vague about what you are trying to achieve.
    So thought whether we can separate the mailboxes for the users.I still have no idea what you are trying to do and more importantly why.
    Regards,
    Shane.

  • HT1535 Once I have songs in mt ipod, How can I separate the songs into folders?

    Once I have songs in my IPod, how can I separate them into folders such as favorites, etc.?

    That sort of thing is best done in iTunes. And by "folders", I assume you mean Playlists.
    In iTunes, you can create Playlists and then sync those to your iPod. The music will still be listed by artist, album etc,. but if you go into the Playlists menu, you will see the songs grouped by Playlists, according to your choices.
    As you mentioned favourites; on your iPod you can give a song a star rating, from one to five stars. It's possible to create a Smart Playlist in iTunes which will automatically add (for example) three, four and five star rated songs to a Playlist, but not the songs with no rating or just one or two stars.
    So if you were listening to a song and decided there and then to give it a four-star rating, then at the next Sync with your iTunes Library, that song would be added to your Smart Playlist which is then also included on the iPod. (In theory, it should go into that Playlist on your iPod without connecting to your iTunes Library, but that doesn't always work.)

  • I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

    I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

    You seem to be new to this software, so I highly recommend that you take some time to learn it using some great tutorials available online - it will pay off to invest the time, if you follow through, for example the great (and free) introductory tutorial at izzyvideo.com.
    This is an amazing piece of software, and you'll have a lot to learn, but it's well worth it.

  • Drop the files into different directories based on the filename

    Hi,
    I had a reqiuirement based on the file name, i should drop the files in to different directories.
    I can get the filename through variable substitution in receiver file communication channel, now i want to drop the file into different folders based on conditions.
    suppose, if the file name is DDDX234
    i should do substring of filename0+(4), if the value is L then i should drop in X directory
    suppose, if the file name is DDDY234
    i should do substring of filename0+(4), if the value is L then i should drop in Y directory.
    How can i drop the file into differnent directories based on filename.
    Thanks
    Srinivas

    Thanks Michal,
    I mapped the directory and filename to the target header in the mapping
    Filename --> UDF --> Header(target)
    and in the receiver channel checked the ASMA and given * in the filename and directory name.
    But in runtime iam getting the error as
    Attempt to process file failed with com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header
    MY UDF is
    public String Directory(String a,Container container){
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key  = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
    DynamicConfigurationKey key1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "Directory");
    String FileName = conf.get(key);
    FileName = a;
    conf.put(key, FileName);
    %%%based on filename the directory should change
    String Directory = conf.get(key1);
    Directory = "/SAPInterface/XI/PPD/DHX/out";
    conf.put(key1, Directory);
    return "";
    Help me in correcting this error.
    Thanks
    Srinivas

  • Breaking up the weblogs into different categories

    It will be really nice to break up the weblogs into different categories based on technical areas(kind of like forum but not that many categories). There could be one category where all the general discussion weblog could be posted. I think this will generate more traffic towards weblogs. Right now lot of the technical weblogs are getting lost among the general content. Just a suggestion. Love to hear back from SDN members.

    Hi Sing,
    Once in a while this request comes up and I have the same reaction as Craig has. It's there, just select Topics and every one of them has it's own page.
    For example here is the EP page:
    https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/weblogs/topic/22
    Your latest Weblog still on top although there were many other posts on the most recent weblogs page.
    It makes me think how we could better make it available to people. The weblogs as well as the link on the main EP page is directly to this page.
    Not sure what else can be done, besides a Weblog pointing it out again.
    Best, Mark.

  • I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns

    I want to convert a series of names into a table (in either numbers or pages). The list I have has a name and then an email address in brackets, followed by a 'yes' or a 'no'. I would like to separate the list into three columns - the first containing the name, the second containing the email address and the third containing the 'yes' or 'no'.
    Can you help me ?

    The question that needs to be answered is what is separating the columns? Is it a single tab, one or more tabs, spaces, or what?  Or is it the brackets that makes the separation between the three pieces of data?
    If it is always a single tab, that makes it really easy.  All you have to do is find/replace the brackets with nothing (as Wayne said)
    If it might be multiple tabs, you can find/replace tab-tab with a single tab and repeat that a few times until no more double-tabs are found.
    If it is one or multiple spaces, that might be difficult. I'll think about this one if this is what you have. I'll ignore this possiblility for now.
    If it is the brackets separating the three pieces of data, you would Find/Replace the left bracket with a tab then do the same with the right bracket.

  • How can I separate one column into multiple column?

    How can I separate one column into multiple column?
    This is what I have:
    BUYER_ID ATTRIBUTE_NAME ATTRIBUTE_VALUE
    0001 PHONE_NUMBER 555-555-0001
    0001 EMAIL [email protected]
    0001 CURRENCY USD
    0002 PHONE_NUMBER 555-555-0002
    0002 EMAIL [email protected]
    0002 CURRENCY USD
    0003 PHONE_NUMBER 555-555-0003
    0003 EMAIL [email protected]
    0003 CURRENCY CAD
    This is what I would like to have:
    BUYER_ID PHONE_NUMBER EMAIL CURRENCY
    0001 555-555-0001 [email protected] USD
    0002 555-555-0002 [email protected] USD
    0003 555-555-0003 [email protected] CAD
    Any help would be greatly appreciated.

    This is another solution. Suppose your actual table's name is test(which has the redundant data). create a table like this:
    CREATE TABLE test2 (BUYER_ID number(10),PHONE_NUMBER varchar2(50),EMAIL varchar2(50),CURRENCY varchar2(50));
    then you will type this procedure:
    declare
    phone_number_v varchar2(50);
    EMAIL_v varchar2(50);
    CURRENCY_v varchar2(50);
    cursor my_test is select * from test;
    begin
    for my_test_curs in my_test loop
    select ATTRIBUTE_VALUE INTO phone_number_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='PHONE_NUMBER';
    select ATTRIBUTE_VALUE INTO EMAIL_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='EMAIL';
    select ATTRIBUTE_VALUE INTO CURRENCY_v from test
    where person_id=my_test_curs.person_id
    and attribute_name ='CURRENCY';
    INSERT INTO test2
    VALUES (my_test_curs.person_id,phone_number_v,EMAIL_v,CURRENCY_v);
    END LOOP;
    END;
    Then you will create your final table like this:
    create table final_table as select * from test2 where 1=2;
    After that write this code:
    INSERT ALL
    into final_table
    SELECT DISTINCT(BUYER_ID),PHONE_NUMBER,EMAIL,CURRENCY
    FROM TEST2;
    If you have a huge amount of data in your original table this solution may take a long time to do what you need.

  • How can I access the iphoto library using windows pc? Upgrading to aperture solves my problem?

    How can I access the iphoto library using windows pc? Upgrading to aperture solves my problem?
    My home network is used both by my macbook and my wife's windows pc. Considering that, I would like to know if we can share our pictures with each other (specially because I intend to store all of them into a NAS storage - WD My Cloud, probably).

    No you can not - neither iPhoto nor Aperture has any cross platform capability
    You can share photos with the PC using MyPhotoStream or Shared PhotoStreames
    You can not share the iPhoto library
    And you can not put the iPHoto library on a NAS - it MUST always be on a volume formatted Mac OS extended (journaled) and mube on a fast wired local connection - it can not be on a Network
    There are Digital Asset Managers that can do what you want - iPhoto and Aperture can not
    LN

  • Can't activate the Stack or Data window when debugging or test a procedure

    Hi,
    I can't activate the Stack or Data window when debugging a procedure. The options in the View/Debugger menu are all grayed out. I can't provide parameter values when testing procedures. I am using SQL Developper 3.2.2. Has this feature ever worked?
    Thanks,
    Mario

    Hi Jeff,
    Thanks for the reply. You were right. I didn't have the privileges for debugging. I installed a local db and now have DBA privileges to do my learning and testing. I did a simple test that takes 2 strings and concatenates them into a 3rd variable then displays them. Seems to work except that the DBMS_OUTPUT occurs in the debug log is this normal? See below.
    Connecting to the database LocalScott.
    Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
    Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '172.30.41.35', '52123' )
    Debugger accepted connection from database on port 52123.
    Executing PL/SQL: CALL DBMS_DEBUG_JDWP.DISCONNECT()
    AAAAXXXX
    Before PARAM3 = AAAAXXXX
    After PARAM3 = AAAAXXXX
    Process exited.
    Disconnecting from the database LocalScott.
    Debugger disconnected from database.
    Thanks,
    Mario

  • Firefox can't find the file at /C:/WINDOWS/system32/oobe/icserror/icsdc.htm

    I deleted a stack of files and must have accidentally deleted this one. I restored my computer and all the other files came back except this one. I uninstalled firefox and reinstalled and still I get Firefox can't find the file at /C:/WINDOWS/system32/oobe/icserror/icsdc.htm
    This version also won't let me use my AVG plug in? Says it's not compatible

    hello tanisha625, it looks like some program has overwritten the default new tab page. you can either install the [https://addons.mozilla.org/firefox/addon/searchreset/ searchreset addon] to get rid of the problem or manually reset the page that opens on each new tab.
    enter '''about:config''' into the firefox location bar (confirm the info message in case it shows up), search for the preference named '''browser.newtab.url''' and double-click & change its value to '''about:newtab'''.

  • I have written an ebook that has been created for kindle. How can I export the book into iBooks author?

    I have written an ebook that has been created for kindle. How can I export the book into iBooks Author?
    I have tried converting the book to different files like, mobi, epub, pdf. By using an app on my iphone.
    I still cannot add it to iBooks Author.
    I'm stuck, Please help me!

    Either use copy/paste and then format/style as desired, or take it to Pages or WORD and insert chapters - which may still require resettling.
    If you're looking for a 1:1 port, with all styles and layout intact, you may be dissapointed, tho.

  • Can I separate text messages into groups by senderS

    Can I separate text messages into groups by senders? I want to have all of my work conversations in one spot so I do not have to look at them all the time

    no

  • HT1692 I have 2 phones on 1 iTunes account. Can I separate the contacts

    I have 2 phones on 1 iTunes account. Can I separate the contacts

    it's meant to work like that
    so if you receive a message on your iphone you also get it on your ipad or ipod touch
    to avoid it use separate appleID for each device
    or turn off imessage on 1 or both devices in their settings
    but that will not fix the issue that 2 devices using the same appleID will never be able to facetime eachother
    the appleID is a unique handle for 1 user only

Maybe you are looking for