Can we setup two sets different 7912 logos in one CCM cluster?

Hi,
CCM 4.1(3) cluster within head office. We created the 7912 logo for system default image. However, the remote site 7912 phones, need to use a different logo other than the head office.
as per http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc5d3d/0#selected_message
We can create the 7912 logo, but how can we setup two or more different 7912 logos for different sites?
We noticed on CCM4.1(3), there is idle URL for 7912 phone, what is the callmanager default link for this URL? I am thinking to use different logo file names, and put the related URL on this parameters for remote site 7912 phones.
Could someone let me know or any other better way to do?
Thanks,
JJ

Hi JJ,
This should work just the way you have described. Have a look;
Idle
Enter the URL that displays on the Cisco IP Phone display when the phone has not been used for the time that is specified in Idle Timer field. For example, you can display a logo on the LCD when the phone has not been used for 5 minutes.
Leave this field blank to accept the default setting.
Idle Timer (seconds)
Enter the time (in seconds) that you want to elapse before the URL that is specified in the Idle field displays.
Leave this field blank to accept the value of the Idle URL Timer enterprise parameter.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecfc7.html#1121361
Here how on CCM;
Method 1:
Choose System > Enterprise Parameters so that the change is propagated to all of the phones from the Cisco CallManager Administration page.
In the URL Idle field, enter http://IP_address_of_CallManager/CCMCIP/filename.xml.
In the URL Idle Time field, enter any positive value in seconds.
Method 2:
Choose Device > Phone under the Cisco IP Phone configuration so that only this phone displays the graphics from the Cisco CallManager Administrator page.
Choose the phone/phones on which you want to put the display.
In the Idle field, enter the path http://IP_address_of_CallManager/CCMCIP/filename.xml.
In the Idle Timer field, enter any positive value in seconds.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml#topic4
Hope this helps!
Rob

Similar Messages

  • Can I setup two-step verification for more than one Apple ID?

    I have one iPad and one iPhone.
    I have four Apple IDs.
    I want to setup two-step verification in all four accounts.
    Can I?
    It seems that I can't, because to add a "trusted device" to an Apple ID requires setting up Find My iPhone on that device. Find My iPhone requires an iCloud account (which is available with every Apple ID). But once you change the iCloud account account used for Find My iPhone on a device, the device will not be able to be used in two-step verification for the previous iCloud account. Or will it get remembered?
    Anyone have any knowledge about this?

    You should be able to have more than account authorised on your Mac's iTunes via the Store > Authorise This Computer menu option - and you should be able to select and sync purchases from both accounts to your phones

  • Change different 7912 logos on two sites

    Hi,
    CCM 4.1(3) cluster within head office. We created the 7912 logo for system default image. However, the remote site 7912 phones, need to use a different logo other than the head office.
    as per http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc5d3d/0#selected_message
    We can create the 7912 logo, but how can we setup two or more different 7912 logos for different sites?
    We noticed on CCM4.1(3), there is idle URL for 7912 phone, what is the callmanager default link for this URL? I am thinking to use different logo file names, and put the related URL on this parameters for remote site 7912 phones.
    Could someone let me know or any other better way to do?
    Thanks,
    JJ

    Hi JJ,
    This should work just the way you have described. Have a look;
    Idle
    Enter the URL that displays on the Cisco IP Phone display when the phone has not been used for the time that is specified in Idle Timer field. For example, you can display a logo on the LCD when the phone has not been used for 5 minutes.
    Leave this field blank to accept the default setting.
    Idle Timer (seconds)
    Enter the time (in seconds) that you want to elapse before the URL that is specified in the Idle field displays.
    Leave this field blank to accept the value of the Idle URL Timer enterprise parameter.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecfc7.html#1121361
    Here how on CCM;
    Method 1:
    Choose System > Enterprise Parameters so that the change is propagated to all of the phones from the Cisco CallManager Administration page.
    In the URL Idle field, enter http://IP_address_of_CallManager/CCMCIP/filename.xml.
    In the URL Idle Time field, enter any positive value in seconds.
    Method 2:
    Choose Device > Phone under the Cisco IP Phone configuration so that only this phone displays the graphics from the Cisco CallManager Administrator page.
    Choose the phone/phones on which you want to put the display.
    In the Idle field, enter the path http://IP_address_of_CallManager/CCMCIP/filename.xml.
    In the Idle Timer field, enter any positive value in seconds.
    From this good doc;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml#topic4
    Hope this helps!
    Rob

  • How can I make two copies of the same picture one with my watermark and one without for printing for clients?

    how can I make two copies of the same picture one with my watermark and one without for printing for clients?

    Export the photo twice, once with a watermark and once without a watermark.

  • HT204053 Can I search or locate different iPhone devices using one apple ID?

    Hello!
    Can I search or locate different iphone devices using one apple I.D.?
    Thanks!

    You can only use Find My iPhone for accounts that you can log into.  If you and your neighbor have different IDs and you only know your ID, than you can only track devices attached to your account.

  • Numbers: two sets of numeric data in one cell. Delete, clear all deletes one set only. Cell is not "locked"  Ideas?

    Numbers: two sets of numeric data in one cell. Delete, clear all deletes one set only. Cell is not "locked"  Ideas?

    You will really need to explain in a little more detail what you mean by "two sets of numeric data in one cell".
    Also, is this Numbers for OS X? You are in the iOS forum.

  • Can i have two versions of OSX running on one computer

    can i have two versions of OSX running on one computer?

    Yes. The second one can be installed on an internal or external drive, but can't be one that the computer wouldn't be able to run if installed on the internal drive.
    (63298)

  • I have multiple apple devices mainly used between me and my wife , my question is that can i have two sets of contacts backed up to icloud one for her devices and one for my devices using the same itunes account

    i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
    now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
    i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
    please guide

    You can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device).  There is no requirement that you use the same Apple ID for purchases and for iCloud.

  • How can I plot two sets of data points in 3d graph?

    I am trying to plot two sets of data points in 3d graph. I also need to make a set of data with one color and the other set with a different color. For example, I need to plot 10 (x,y,z) data points in 3d. Maybe 6 points need to be blue, and the other 4 red. Could you tell me how?

    What is your LabVIEW version? (things are a bit different in 8.6).
    Basically, you create multiple instances of the VI that gets placed automatically when you drop the 3D graph and then wire a different number to the plot ID at the bottom.
    You define all the plots (color, style) via the properties dialog.
    Have a look at my example posted here. One plot is "blue dots" and one is a "shaded surface". See how far you get.
    Message Edited by altenbach on 04-23-2009 01:11 PM
    LabVIEW Champion . Do more with less code and in less time .

  • How can I link two frames via a button on one of the frame?help Plz

    Ok,here is the problem. I got two fully working java frames,each has different funcion. On one of the frames(my home Frame" Frame 1" ) i got a button called "Add User", when i press it i should then get my other frame(Frame2) to popup/run. in Frame1 i got this code as action for the add user button.Note: each Frame have thier own Main class.
    public void actionPerformed (ActionEvent e)
    if (e.getSource()==jbtnAddUser)
    // new Frame2(this,"hshsh",jb);
    ////////////// The commented line is where i am not sure what to put in there, Frame1 is the name of my Frame 2 class......
    Please could anyone tell me how do i link Frame 2 to Frame 1....i appreciate it....Max

    You can create both together on pgm startup (instaniation of the class).
    Next for frame1 - I'll call it - you can setBounds(int, int, int, int) and setVisible(true); When you press the button on frame1 to get frame2, you can then do frame1.hide(), followed by frame2 setBounds and setVisible. Finally, when you are done with frame2 you can do frame2.dispose() and frame1.show(). try that.

  • HT3819 can I use two or more Apple Tvs on one network?

    I have two Apple TVs on my network, one in a basement cinema and the other in the ground floor TV room - if I use the one in the basement, then stop using it and then later in the day try and use the one in the TV room I get an error message asking me to turn on home sharing.  I have to go upstairs to my MAC turn home sharing off and then on again for the second Apple TV to work.  The same thing happens if I subsequently try and use the Apple TV down in the basement.  I am not trying to use them both at the same time.  Does anyone know if I can run two (or more) Apple TVs on the same network and if so how do I get around the home sharing error I keep getting?  Thanks!

    Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))

  • How can I setup two ipods to automatically sync different songs?

    My son and I now both have Ipods. Can I set it up so my Ipod will auto sync my songs and his, his songs? Please step by step me...i know nothing Thanks

    Have a look at this article in the Apple Knowledge Base and let us know if it brings you any combination of joy and/or satisfaction.

  • Can I import two sets of data to Essbase at the same time?

    For example, use two MaxL Scripts to import data to one Essbase Application Datatbase in the Same time, is there any impacted or will fail one of them or nothing will happen but just slower?

    Hi,
    It is possible you run 2 dataloads at the same time, there will be probably be an impact in performance than just loading one file at a time, not sure of the impact, you will have to test.
    If you are talking about a BSO cube you could also have a look at the essbase configuration setting DLTHREADSWRITE to see if you can improve the dataload time by increasing the threads.
    If it is an ASO cube then you should be able to do multiple dataloads into different buffers, though you have to commit them to the database at the sametime.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Can I have two iPads, different models, under my account?

    I have two different iPad models. Can I register them both under my account?

    Welcome to Apple Support Communities
    Of course. Moreover, you have to do it to share your information and your files between them

  • Can I add two sets of chapters?

    I think in the DVD hierarchy it's known as having multiple titles.
    I am editing a wedding procession and a wedding reception would like the two separate iMovie videos on one DVD each with their own set of chapter markers. Is it possible?

    Normally I simply put both (ceremony and reception) on the same dvd. And iDvd will allow you to do this /even if one must use dual layer media, provided the couple also uses a relatively new dvd player.
    However some couples own very dated equipment / dvd players and to use the latest technology /DL media is to actually do a disservice to the bridal couple and their loved ones ... mainly because they won't be able to play their own wedding video unless they purchase a new set top dvd player. So one needs ASK and to take this into consideration prior to shooting the couple's wedding. A checklist often helps accomplish this.
    I've had couples request a separate dvd for the actual ceremony and one for the reception (two physically separate dvd's). This isn't a problem in most cases.
    But every once in a while someone also insists on ONE physical dvd (not two) but yet they own an older set top dvd player/s. So what would you offer them in this situation? You can't give them DL media (knowing they have an older dvd player).
    Rather than use DL media (which you already know won't work on most older set top dvd players) I prefer to offer them a two-sided dvd-r like this (not to be confused with DL media):
    http://www.runtechmedia.com/product.asp?sku=RitekDVDrDB8x50
    The first side of the dvd contains the ceremony, while the second (separate iDvd project) contains the reception. However, there is a need to actually Flip /turn over the dvd to the opposite side in order to play the reception too.
    Btw, it not a good idea to label the actual dvd if you opt to use double-sided dvd's. If you do, you will likely disable /destroy one of the working surfaces.
    Hope this helps but if not just come on back.

Maybe you are looking for