Can we stack dashboard pages over one another

Are you looking something like in this link?
http://obiee101.blogspot.com.es/2010/06/obiee-multie-line-tabs-part-2.html
I've tried (Re: Multiple-line tabs dashboard its very hard to customize it in that way.

Similar Messages

Can I purchase & install "Pages" on one of my I-Macs and then have access to "Pages" on another I-Mac I own?

Can I purchase & install "Pages" on one of my I-Macs and then have access to "Pages" on another I-Mac I own wothout purchasing it again?

If you purchase using the Mac App Store application on your Mac, you can also install the app on any other capable Mac you own and use with the same Apple ID User Account. Just log into the Mac App Store from the second Mac and Download/Install.
Jerry

How can I scan multiple pages to one file with MG 7120

My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

Hi albabynyr,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file. To scan using the IJ Scan Utility, please follow these steps:
1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then IJ Scan Utility (folder), then IJ Scan Utility (program).
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
3. Click the DOCUMENT SCAN option on the left pane of the window.
4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan. Do this each time a page has completed scanning. After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How can i share the pages application with another computer?

How can U share the pages application with another computer?

Just make sure it is for you or your family.
If you purchased Pages through the Mac App Store, then just login on the other computer using the same Apple I.D. and you can install it at no extra charge.
Peter

How can I copy a page from one wiki to another?

Using the Wiki function in OSX server, I am able to move a page from one wiki to another by clicking the gear icon. Is there a way to copy the page to another wiki while leaving it intact in its existing wiki? I have tried to copy/paste while editing a page, however much of the formatting does not properly migrated to the pasted content.

What you are looking for is how to "duplicate" ca page.

Can not save dashboard after copying to another location

Hi All,
I am moving a dashboard to another location and trying to make some changes but when I click on save button nothing happens, "Saving" text appears, page busy gif appears, thats all. I've waited long enough but no change. This occurs only on one page of the dashboard. The original dashboard page works fine but the copied one is not saving.
Sometimes I get the error;
There was a problem retrieving the response data:Unknown (12030)
Ay idea would help. Thanks.
Ganim

hi,
Use catalog manager to copy from one location to other location
and check in preserve the old item name while copying from one location to other.
Regards,
VG
http://mkashu.blogspot.com

Can I separate the pages of one PDF file into separate files

Is there a quick way to separate the pages of a PDF?
For example, I want to take a 10 page PDF, separate the pages and save them as 10 separate files.
I know I can go through and extract each page, but I need to do this with multiple documents that can be over 100 pages and to extract each page one-by-one would be extremely time consuming.

See Thom Parker's latest http://www.acrobatusers.com/tech_corners/javascript_corner/index.php JavaScript Corner http://www.acrobatusers.com/tutorials/2008/04/js_extracting_pages/ Extracting pages from a PDF with Acrobat JavaScript for an example of JavaScript that can extract every 4 pages and place them in an email or new file. This code can easily be modified to extract every page.
Or you can download http://abracadabrapdf.net/articles.php?lng=en&pg=15 AbracadabraTOOLS 2.5 to add new menu options to your copy of Acrobat that include splitting a PDF by x pages.

InDesign CC pages overlaping one another when exporting

I created a document with 8 pages, 1 front, 1 back and 6 inside facing pages. When I work on the document, everything is running fine. However when I export, the 6 pages on the inside, 3 of the pages keep overlaping with their counterparts. The measurements are all fine and each page is rightfully in its place. The issue is the background. As you can see in the image below, it looks like the two pages are overlapping with one another. I even made an image to cover both pages on photoshop and the two pages still overlap only when it is exported.

It really isn't a problem most of the time. It only shows up when you have content closer to the spine than the bleed allowance, and even then, unless there is creep added during the impositon, or you need the bleed for something like wirebound, it will never make it into an imposed flat.
In a case like this where you have a break at the spine if you actually need inside bleed you need to break the spreads apart and extend the art. See InDesignSecrets » Blog Archive » Breaking Pages Apart to Bleed Off a Spine

In the new version there's no little arrow with back or forward so you can go back several pages in one click. I use that a lot. How can I get it back?

I've just upgraded Firefox and no longer have little arrows by the back and forward buttons on the toolbar. This means I can only click back or forward one page at a time. I used to be able to click on the arrow, see a list of previous pages and then go back (or forward) several pages with one click. I looked at adding the History button to the tool bar but that's not as convenient.

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

Samples play over one another

I've got some audio samples loaded in EXS24--dialogue from movies to be specific. Previously, I had it set up so that I could trigger sample A via my midi keyboard and even if, for example, that sample was 10 seconds long, if I immediately hit another key to trigger sample B, it would stop sample A and play sample B.
However, now something's changed and I don't know what. If I trigger sample A, and then trigger sample B, sample A continues to play the full 10 seconds while sample B plays and they play on top of one another.
How can I set it so that each time I trigger a sample, it stops the previously playing one and plays the one just triggered? I feel like an idiot--I had it set up that way before, but now I can't figure out how I did it, or what's changed!
I'm using Logic Express 9.
Thanks for any help!

And I did try the mono setting, but when I trigger a sample, it doesn't play the full sample unless I hold the midi key down. Previously I just hit the key once and it would play the entire sample. I also have 1Shot checked for each of my samples in the editor as well.

Can I transfer a "pages" document to another iTunes account?

Can I tranfer a pages document to a desktop computer without using wifi? I would then want to be able to put information from the computer onto the ipad as well. The schools block their ipads from using the wifi so we are trying to find away around this. thanks

Without wifi, you are stuck. Whether you are syncing, e mailing or anything else, they all rely on wifi. There is an app in the store called file transfer ( or something similar) that uses bluetooth, but I tried it and simply does not work, except for picturess.

How can I copy a page from one document into another?

I have produced a document in two separate fils and want to merge them into one. There are six pages in each file, I need to put them I to one file, turn into a PDF and then mail them.

Menu > View > Page Thumbnails > click on them > Copy > Paste into Thumbnails of other document
Peter

Printing multiple dashboard pages into one pdf

Hey guys,
I know this is not offered as standard but I was wondering if there was any way to do this.
Two methods i'm wondering about are:
- Create another page with a javascript "print" button which grabs information from each page and prints to one pdf.
- Create another page that holds a static copy of all analysis' in the other pages.
The reasons I need to do this is that we originally had 30 analysis' running on 1 page which was destroying performance and killing our servers.
To rectify this, i have split the report out over numerous pages but the users still want to only print once.
Thanks in advance for any suggestions,
Adam

Hi,
Ok your condition is very tricky.
Just Try this if this works.
Create many sections in the dashbaord like say 4. Divide you reports into 4 sections and place it in each section.
Use condition in each Section. Have an extra filter in your main dashboard. having pages 1,2,3,4 as selections.
conditions should be used as : if user seletcs 'page 1' in promt then only 1 section should be visible. after Section 1 is exucuted and printed , if user selcts 'Page 2' then 2 secions wll be visible.
here user can select one by one to reduce the load on the server.
fibally if you select 'Page 4' all the reports will be visible togther. now you can print to PDF.
Mark if helps.
fiaz

How can I retrieve my pages documents from another account in the iCloud

I was using pages in my ipad. Then I bought a Mac Pro and signes with a new iCloud account. In order to sync it with my ipad I deleite the previous iCloud account from the divise and started it with the new account. I previously choose to keep all the documenta before deleten the account.
Now when opened pages I can not see any of my previous doccuments

You'll need to copy the Pages documents from the old iCloud account to the new one. To do this, go to iCloud.com from your Mac and sign into the old account. Launch Pages beta and confirm that your documents are still there. Assuming they are, select them, then click the gear icon on the menu bar and choose Download Documents and choose the Pages format. This will download copies of the documents to your Mac. Drag the downloaded documents to your desktop and double-click on them to extract them from the .zip files. Next, sign out on iCloud.com and sign back into your new iCloud account. Launch Pages beta in the new account, then drag and drop the documents from your desktop to the Pages beta window to upload them to the new account. You can now access the documents from devices signed into your new account.

Can I just drag OSX over to another HD?

After re-initialising my external HD, can I just drag the system folder over to my external HD, in order to have a mirror system on the ext. HD from which I can boot? I would rather do that than installing from CD if I could, because there have been many updates to OSX since my install disks, and I would rather not have to download hundreds of megabytes of updates to make it current.
If I want to drag OSX across, which folders are the ones to drag?
Does the "restore" function in Disktools perform a similar task, ie copy OSX to a target disk?
Thanks
A.

Unfortunately you can't. What you need to do is to use a cloning tool to do this such as SuperDuper! (my recommendation)…
http://www.shirt-pocket.com/
… else Carbon Copy Cloner…
http://www.versiontracker.com/dyn/moreinfo/macosx/13260

Can we stack dashboard pages over one another

Similar Messages

Maybe you are looking for