Can we stop incoming IDOC in XI

In a particular XI scenario, IDOC is coming from a R/3, but due to some performance reason, we need to stop those IDOCs entering into XI,
i am not supposed to change the Configuration, or Design in Integration builder (due to some reason),
also, we cannot stop those IDOC from R/3 (due to some reason),
How can we stop these IDOCs flowing into XI,
is there any facility in IDOC adapter to filter those particular IDOCs,
pls advice

Dear Sudeep,
I'm not sure what exactly is your performance issue.
If you dont want specific IDocs send to XI from R3 you should remove it
from the Destribution model (BD64)
and\or from the partner profile (WE20).
best of all is to remove the action from the customization that initiats calls for th ALE output type.
consul your SAP R3 uisness pepole or your ALE specialist.
Nimrod.G

Similar Messages

How can i hide incoming calls from showing on my screen

How can I stop incoming calls from showing on my home screen?

If you just don't want to see the call notification on your home screen go to Settings, Notification, Phone and turn Notification Center to Off. Or you can simply select None and calls will be listed in the Notification center but you won't see a banner / alert on the home screen.
This also eliminates the Caller ID from being displayed before you answer the call.

Can I stop the flashbulb from flashing when incoming messages appear?

Can I stop the flashbulb from flashing when incoming messages appear?

Yes. Just turn it off in settings.
You should read the manual:
iPhone User Guide (For iOS 5.1 Software)

How can I stop my incoming text messages from going to my daughter's iphone?

How can I stop my incoming text messages from going to my daughter's iphone? I have the 4s she has the 4. When she got the latest update, everything on our phones synced. She got her own apple id, but she is still getting all of my text messages.

This is with iMessages only, and because she has the same email address available and selected under You can be reached at at Settings > Messages > Send & Receive.

Info type and subtype to stop income tax deduction for a month

can i know how to stop income tax deduction for a month for a specific employee. I understand that this s possible

Hi
You can use additional wage type (infotype 0015)
and subtype voluntary tax std is MVT1 as per SAP
if you maintain 0.01 value here and indicating the month
SAP calculated income tax is supressed and this is how u can stip income tax deduction for a month
with regards
partha
keep sharing and learning

Stop Inbound IDOC's from being created

I want to stop inbound IDOC's for a particular partner (type LS) from being created in our R/3 system. Is there a way to do this? I am aware these can be stopped in the middleware, but this is not possible in our case. I am also aware that I can stop these IDOC's from being processed via the partner profile, however, there will be a huge number of useless IDOC's that will be created in our system and I want to avoid that.
Hence, I do not want the inbound IDOC's to be created in the first place even though they are transmitted to SAP. Is this possible?
Any inputs will be highly appreciated.
Thanks,
Raghu.

Hi Satwik,
Choose Idoc in WE02.
Get port name, Then in WE21 get RFC name.
Go to transaction SMQS - Here we can block this RFC instead of blocking the queue.
Thanks,
Anil

Get File name from incoming IDoc

HI All,
I am in an IDOC to File scenario using Fcc. (R/3 --> XI --> 3rd party)
I need to use the idoc-number(EDI_DC40-Docnum) as my output file name. I planned using variable substitution but there it expects me to get the idoc number from payload which I do not have it in. (refer c ode below)
As I understand, variable substitution can be used only on payload(the FINAL data set that we will be writing to the file).
Can we use the data which is part of incoming IDOC and not part of payload(final data what we are writing to file).??
Other idea was to map this IDOC no to a field in final file, but this field should not be written in the output file, so am confused about how to achieve this.
E.g
*Incoming Data*
IDOC
|_EDI_DC40
|_DOCNUM
Final data (Payload)
Header
Data
Trailer
As seen in my example above I do not have the IDOC no in the final data so how do I use the Idoc no as my filename? Apprecaite your help on same.
Regards
Shirin

Hi
You can use dynamic configuration to get the file name .
Use Adapter Specific Message Attributes for the target Comm Chanel check the indicator for filename in the advanced tab of CC
create a UDF with i/p as file name i.e the Idocnum field and
paste this code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//conf.removeAll();
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//String filename= conf.get(key);
conf.put(key, fileName);
key= null;
return fileName;
PS: use cache as value in UDF
ands assign the o/p of this UDF to a root node

HT5361 Why is that when I am composing a new message do I end up with multiple versions of my message I am composing up in my Google Trash mailbox? How can I stop this from happening?

Why is that when I am composing a new message do I end up with multiple versions of my message I am composing up in my Google Trash mailbox? How can I stop this from happening?

It was very hard to see what the box says because the message displays for less than one second. However, I was able to record it with my iphone and pause it until I got a shot of the message. The box says the following:
"Do you want the application “java” to accept incoming network connections?
Clicking deny may limit the application’s behavior. This setting can be changed in the Firewall pane of Security preferences."
I did make some changes. I will see if it works.
Thank you!!!

Problem in processing incoming IDOC

Hi All,
I have a problem while processing Incoming IDOC in the system.
While I try to process and FI IDOC (without purchase order) in the system, by giving the appropriate GL account and cost centre where the document should get posted to (in transaction WE19), I find that the system creates the IDOC successfully with status 53. However, it creates a parked document in the system for the vendor.
When I try to post the document through transaction FBV0, the system asks for a cost centre. Can you please clarify, why the system is asking for a cost object though it is given in WE19 transaction. Ideally while processing the IDOC the system should post the document directly as it has all the relevant details in the IDOC right?
(Just for info, I have given the GL account details in segment E1EDP19 with qualifier 002 and the cost centre in segment E1EDP30 with qualifier 045)
Expecting your help in this regard.
Regards
Nagarajan N

Hi
You can use WE19 to debug the Idoc FM.
Check this link if it is helpful:
Debugging Idocs
Regards
Neha

How can I test the IDOC ORDERS05 user exit EXIT_SAPLEINM_002?

We used user exit EXIT_SAPLEINM_002 for changing the PO IDOC values.
When I repeated the PO message to create new PO IDOC, I can not stop the process at the user exit EXIT_SAPLEINM_002. Is there any way to debug the PO IDOC creation at the point of user exit EXIT_SAPLEINM_002, so I can see how the user exit EXIT_SAPLEINM_002 works at run time?
Thank you in advance!
Fisher Li

Hi
Put a debug point at include ZXM06U02 in user exit EXIT_SAPLEINM_002.
In your PO go to header tab -> output and set ur output type to periodically scheduled job because if that output type is send immediately it will not stop at break point. So select your output type press button Further data and set it to peridically scheduled job.
Then go to we15 give ur application as EF, your Po number and your output type then execute. It will stop at that user exit.

Incoming IDOC Error "No batch input data from the screen SAPMV45A 4001"

Hello ,
The Incoming IDOC with Message type 'ORDERS' is triggering the error message "No batch input data from the screen SAPMV45A 4001" with message no 00344 . There is an SAP note 785000 to handle this type of error message which has been already implemented. Still we are encountering few IDOC error's at the time of sales order creation. The IDOC reaches status 51 throwing the error which is again reprocessed through BD87 .
We are unable to replicate the similar scenerio in Development & Testing systems as it works fine.
Can any one kindly advise how to eliminate the error "No batch input data from the screen SAPMV45A 4001" message at the time of Incoming IDOC processing.
Thanks in advance.
Best Regards
Sateesh

Dear Sateesh
Check this link where the same topic was discussed
[ VA01/VA02: batch-input error in IDoc processing|http://www.sapfans.com/forums/viewtopic.php?f=21&t=313032]
thanks
G. Lakshmipathi

How to stop outbound IDOC in PI without error

Hi,
The scenario is Idoc - JDBC and personID is unique field in database.
Now the requirement is, in some cases personID generated after certain process or I can say in some cases personID is not present when this interface runs.
Now I need to stop outbound Idoc in PI system (without any error) if perosnID is not present. Means I dont want to send any data to database if personID is not present. Is there any way to accomplish this task?
Regards,
Chintan

Hi All,
Thanks for replying with very useful information and answers, really appreciated.
I am able to solve this issue by using Node Function at Message Type level. I created following condition at message type level.
personID -> removecontext -> Equals -> 0001 -> removeContext -> createIf -> receiver MT
Here i've to use removeContext two times because the segment which contains personID field is repeated many times so I've to check in each segment.
If this condition fails (if personID is not present ) then the target message structure is not going to be created.
Thank you once again.
Regards
Chintan

Looking to stop sending IDOC if output has been already processed for PO

Hi,
I am using the Message type ORDERS to trigger the IDOC for the purchase order based on the output type. But my requirment is that if the output is already processed for a specfic purchase order then it should not allow to process the output again for that purchase order. So i am writing a logic in user exit that if NAST table entry is already exist and proccessed for the output type for specfic purchase order then i want to stop sending the idoc. As NAST entries doesn't contains any segment data due to that i am unable to set the ALE filter in BD64 transtaction .So could you please anyone give me any suggestion how can i stop sending the IDOC if output has been already proceessed so that it will helpful for me.
Thanks in advance for your help .
Regards,
Kiran

>
divyesh vasani wrote:
> Hi Shabarish,
> Thanks for your reply.
> I was working on solution proposed by NALLAM GUNA RANJAN.
> But as you and Jai mentioned, but I think Maintain Order At Runtime option is available with Interface determination not with Receiver determination.
> In my case, From same Input file(from which Text file is generated) mail report has to be generated but after creation of text file only.
>
> Thanks
> Best Regards,
> Divyesh
1. In case you intend to use maintain runtime then use a single receiver and add multiple inbound interfaces. This is the easiest solution
2. use a BPM. use send steps in serial. First send step should be File (request for acknowledgment) and then followed by send step for mail.
Do not go for scripts etc unless no other solution persists since maintenance and support in the future will always be an issue.
let me know if u still have issues.

Incoming IDOC error

Hi All,
When i tried to post a incoming IDOC which will result in a BDC session and we post the IDOC as a accounting document, iam getting a Error message of <b> Post document ( screen not found )</b> with a status 51, Can any of you let me know about this error, will reward with points for answers.

Hi
May be the BDC session is not recorded well, check the program again.
May be the code added in the program is relating to the screen which is not available at the time of document posting ( these screen numbers will be diferent for each window/pop up window - like seperate screen number possible of additional information screen, profitability segment screen, other information screen, etc.) check the same with ABAPer
VVR

My 4s is now copying me on all my texts. How can I stop this?

My 4s is copying me on all my text messages.....how can I stop this?

Unfortunately I no longer have an iPhone 4 to check but on my iPhone 5 this works. Go to Settings->General->Accesibility->Incoming Calls. Ensure you select "Default" and not "Speaker".
I hope this helps.

Can we stop incoming IDOC in XI

Similar Messages

Maybe you are looking for