Can we transport deleted planning areas acorss landscape

Hi All,
I am new to SEM, I have to delete some planning areas and same has to be done across the landscape.
Can i delete planning area and collect to request and transport or do i need to delete planning areas in each system.
Any help greatly appreciated.
Cheers,
Suresh.

Deleted objects will not be deleted on your target system, so you have to do it manually.
Hope it helps.
Regards

Similar Messages

  • Release DP- SNP Can't choose target Planning Area rather than 9ASNP02

    Hi SAP Expert,
    I tried to release from DP to SNP with TCode: SAPAPO/MC90 Rlease Demand Planning to Supply Network Planning.
    When I press button: "Release: Extended" --> In "Target Version" area, system display one more  parameter: "Planning Area". But it selects Planning Area "9ASNP02" as fix value. We could not choose any other.
    Actually, because I need to work in my own created Planning Area in SNP, (let's call "Z_9ASNP02") so that created it by coppying from the Standard Planning Area "9ASNP02". Now I want to release DP to my own Planning Area "Z_9ASNP02", not 9ASNP02.
    Please show me the solution for this problem.
    Thanks very much for your help!
    Duyennx

    When you release forecast from DP to SNP, planning area does not matter anyways. The release transaction creates orders in order livecache from the time series key figures in DP planning area. Order livecache is only version specific. Once you create an order in version 000, you can view that order in any planning area that is initialized in version 000.
    So, you dont really have to specify the planning area when you release from DP to SNP. 'Release extended' helps you map a key figure in DP to a key figure in SNP without worrying about the order category. In other words, It only shields you from selecting order categories. If you know which order category you want use, you should use the standard release instead of 'Release Extended'.
    Even if you dont want to use the standard release, you can continue using 'Release : Extended'. Even though the planning area is hard coded as 9ASNP02, you will be able to see data that you release in your planning area Z_9ASNP02, provided you have some key figure in Z_9ASNP02 mapped to order category.
    Hope that helps.

  • Deleting Planning Area.

    Hi BPS expers,
    Which measures I would like to take before deleting the Planning ares whihc are no more used in order not to disturb the system?.
    The cubes are already deleted. I need to check the following issues......But I don't know how to do it.
    1. How to  check the Global planning sequences related to these planning areas?
    2. How to know in which Pgm catogories these Planning areas are registered?
    3. Some other precautions should be taken care during this deletion process?
    any sugestions please............
    Thanks in advance
    Regards
    sailekha   .

    Hi,
    As of global sequences you have to manually check each glabal sequence to find out if the area you are about to delete is being used.Also if those global sequences are used in any planning folders or web applications.Otherwise i dont see any issues.

  • 0.41GB of my iPod Touh 4G' is taken up by something called 'Others'. What are 'Others' and can they be deleted or are they an essential part of the iPod and embedded in it? If not essential how do I go about deleting it to enable me to add other pictures

    0.41GB of my iPod Touch 4G's capacity is taken up by something callked 'Others'. What are 'Others' and will it be o.k to delete them? If so how do I go about doing it as there is no trace of a file on either iTunes or my iPod?

    Other content is typically miscellaneous data used by applications you have installed - could be save data (e.g. for games), or documents you've created. There's no easy way to determine precisely what it is, but the only way to clear it is to either delete it from within the respective application, or remove the associated application altogether - neither of which are typically practical.

  • How to change the Package of planning area and datasource to be transportab

    Hi every body,
                       I av created a datasource for the xxx planning area and saved in $tmp which is local package and cannot be transportable .and i would like to transport the planning area along with the data source.But before transporting the planning area along with the data sourse i av to change the package of the data source.I am not able to understand where should i change the package of the planning area and datasouce.
    Can any body help me out of this problem.
    Can be rewarded.
    Shashi

    Hi alaxander,
                    Thanx for your reply but before tranporting a datasource i av to transport the planning area bcoz it is the source.so how can i change the package of the planning area which is in $tmp (local object).
    Regards,
    Shashik

  • Deleted Planned Order Trace

    Dear All,
                  I have one query regarding Deletion Of planned order. Is there any Table or report where we can find out deleted planned order. In my scenario there were four planned orders of which user have converted one planned order into production order but other three planned orders are not appearing in Stock and Requirement List ( MD04). I want to trace these three planned orders whether they are deleted by user. I have tried in PLAF table but could not find out.
    Regards
    Sunil Kumar

    Planned orders which are created temporally just to calculate the net requirement when you run MRP. Hence if you delete manually there will not be any record. If user has deleted the planned order don’t worry, when you run next MRP run system will calculate the net requirement and create new planned orders.
    If you want to restrict the deletion of planned order manually then try with authorization, use the following role
    SAP_MM_CBP_PLANNED_ORDER for MM planed orders
    SAP_PP_MRP_PLANNED_ORDER for PP planed orders.
    Or one more option is create a planned order manually in MD11.

  • How to delete sales area of an Account in Web UI?

    Hi All,
    I want to delete a sales area associated with an account, (i.e Not entire sales area from Organization structure) just delete the link with account.
    I don't have an option to delete sales area associated with account in CRM Web UI. So we refer some SAP recommendations for deleting sales area and then I got these notes SAP Note 1906379 and 725857.
    From the above mentioned notes I can only perform deleting sales area dependent data, but not the entire sales area link as such from business partner.
    We do not have an ECC system,please suggest me some possible solutions for this issue.
    Thanks!!!!
    Regards
    Mukesh.L

    Hi Aaron Smith,
    It will be great, if you guide us in how to delete the sales area of a business partner from Web UI.
    I had tried SAP Note 1906379 and 725857 but i still can't delete sales area as such from business partner.
    Your response is much appreciated!!!!

  • What is a .HDMP file and can it be deleted?

    I have this file
    C:\Documents and Settings\username\Local Settings\Temp\WERcdf4.dir00\Adobe Premiere Pro.exe.hdmp
    and it is almost 1GB in size. Plus I have other .HDMP files totaling another 2GB. Can I safely delete this files? Is this simply a Microsoft reporting file? Or, does PPro need them for something?

    Yes these can be safely deleted they are microsoft files

  • Urgent !! DP Planning area design

    Hi Gurus,
                 Client have different businesses and trying to do DP for each business and also central planning .
    1. i am trying to keep one planning area for all the business.
    Q.My question is can i keep one planning area for all the different business?
    Q2. I  have same material number but different location for different business
    and my question is  there any problem if i do consensus forecast for i business material and does it effect to another business materaial number as we all are in one planning area?
    Please let me know
    Thanks a Lot
    Regards,
    Raj

    Hi Raj,
    There isn't a problem, you can have all data in one planning area, but it is important to do selections in order to have vision of which combinations are from which business.
    You also could use a navigational attribute for your location characteirstic, this attribute can show from which business is that location. But if you use a navigational attribute, you must not use characteristic 9ALOCNO, because this characteristic is used by other modules like SNP who doesn't support navogational attributes.
    I hope this can help you.
    Regards.

  • RE: Need help on cornering the APO BI issue relevant to Planning area

    HI Guys,
    Iam loading historical data from my infocube to APO planning area...
    MY Planning will be done in apo for weekly based..
    for thatmy client has configuired Fisc VArnt which is
    specific for 48 periods but not 52 periods...
    My clinet will be planning in week which will will be like it starts from 07.01.2010,
    14.01.2010,21.01.2010,31.01.2010..
    but for testing purpose we are taking thisfrom a flat file andloaded into the infocube..
    and created gen export datasource into scmapo system and loaded into cune from that cube iam feeding itto planning area..
    when I execute the transaction /n/sapapo/tscube tha data copied was successful,
    but the keyfigure amnt when I saw in the planning area Transaction /n.sapapo.sdp94which will be distributed across the week.
    lets say my keyfigure values is 100 in the infocube for the jan month and week 1
    and the value which i CAN SEE IN THE PLANNING AREA IS week1 25 week 2 25 week 3 25 and week 4 25
    which will be 100 total for amonth,
    but it should not be like that 100 should go into a particular week and should display 100 for that particular week..
    I have calmonth calday, fiscper(posting period) which we have maintained in ob29 as 48 periods
    when i derived calweek in the transformation iam getting 48 weeks but
    when i try to load it to planning area iAM GETTING AN ERROR LIKECOMBINATION IS INCONSISTENT..with the calmonth
    CODE WHICH i HAVE DERIVED CALWEEK FROM CALDAY:
    DATA: lv_year(4) TYPE c,
    lv_month(2) TYPE c,
    lv_day(2) TYPE c,
    lv_result(6) TYPE c,
    v_poper TYPE poper.
    lv_year = SOURCE_FIELDS-calday+0(4).
    lv_month = SOURCE_FIELDS-calday+4(2).
    lv_day = SOURCE_FIELDS-calday+6(2).
    SELECT SINGLE poper FROM t009b INTO v_poper WHERE bumon = lv_month
    AND butag = lv_day.
    IF sy-subrc = 0.
    CONCATENATE lv_year v_poper+1(2) INTO lv_result.
    RESULT = lv_result.
    CLEAR: lv_result.
    ENDIF.
    gURUS CAN ANY BODY THROW SOME LIGHT ON THIS.. iWILL BE HIGHLY OBLIGED
    when i load the data from infocube to planning arae using /SAPAPO/TSCCUBE, the copy was succeeful.. But the issue is the keyfigure value is dis aggregating..
    For ex If my sales hostory for week 1 001.2010 and for calmonth 01.2010 is 100, but it is disaggegating the values for whole month 4 weeks as 25,25,25,25 but it needs to b written as 100 for week 1.rather it should be aggregated on the highlevel as 100 for week 1.
    Do I need to check any Charecterstics combination but all are consistent....
    Even the periodicities in the planning area and infocube are consistent , since i am able to copy in to planning area..
    I dont have calweek in my infocube i have derived calweek with logic provided in my earlier thread, but as of now iam going with calyear and calmonth, fisper3 (postig period), since 48 posting periods are maintained in the 0b29 or t009b tables.
    whether I need to implement any oss notes for this, If I include calweek and calmonth and try to copy in to planning area Iam getting an error periodicities are not matching  SAP Note 1408753 - /sapapo/tscube wrong error message
    /SAPAPO/TSM 232
    Regards
    Balaram

    thnx for replying the thread..
    Where do I maintain this the PLANNING OBJECT STRUCTURE(STOR BKT Profile) and Planning Book-data View(Time Bkt Profile) with the time periodicities for Fisc Varnt and Posting period specificu2026
    Can you pls elaborate on this Iam new to APO BW implementation part, Sine this is a burning issue
    Actually what seeting I need to do there, I think infocube structures are good and copying data in to planning area..
    I have calmonth and Fiscper3 for 48 periods in my infocube
    also whether I need to maintain any calweek in the PLANNING OBJECT STRUCTURE(STOR BKT Profile) and Planning Book-data View(Time Bkt Profile)
    when I checked in planning book keyfigure overview it is maintained there for 48 periods
    For Planning Book-data View(Time Bkt Profile)  how can we achieve this...
    If you could throw some light more on this I have my APO Counter part I will ask him to change the master planning structure accordingly
    Regards
    Ram

  • Multiple person working on same planning area

    Hello,
    Can anyone please suggest how multiple people can work on same planning area at the same time. We are working on implementation project and our team has to work on different planning levels in the same planning area. But locking prevents us to achieve the same.
    Any ideas?
    Regards

    Hello,
    Regarding the change of the Area itself, it looks logic that two person cannot change its design at the same time.
    If I remember well if somebody is changing the Area, then everything is locked. But it is not the case if two person are working on separate Levels.
    A very important thing (correct me if I'm wrong) is that if you have been in change mode of an Area, Level, Package, etc... in your current BPS0 session, you will still lock it untill you get out of BPS0.
    Then, if in your team everybody knows on wich level they have to work and then don't go in change mode of other elements it should work (but not for the area because it contains all the subelements...).
    By the way, check also <a href="http://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=635244">Note 635244 - Locking transaction data in SEM-BPS</a>:
    <i>Two parameters are only designed to facilitate the Customizing process, if users
    carry out Customizing in transaction BPS0 within a project.
    o SEM_BPS_NO_LOCK: This parameter has the effect that transaction
    data is not locked at all. Never use this parameter in a production
    system. As of Support Package 14 for Release 3.1B, parameter
    SEM_BPS_NO_LOCK is released by an additional switch in table
    upc_dark2: For this purpose you have to maintain a record with
    param = ENABLE_NO_LOCK and value = X in table upc_dark2. Only then
    the system includes parameter SEM_BPS_NO_LOCK. The parameter can
    then be useful if you want to test functions or the manual planning
    with 'test data' in Customizing.
    o SEM_BPS_SAVE_UNLOCK: This parameter only works in transaction BPS0;
    it has the effect that the system unlocks data (if possible) after
    it has been saved. Therefore, the system only simulates an exit and
    reentry in transaction BPS0 with the last active detail
    application. Therefore, the above parameter can be helpful if many
    people work on Customizing in transaction BPS0, because objects can
    be unlocked earlier.</i>
    You can add these parmeters to a user id in the "Parameter"tab in T-Code SU01.
    Best Regards,
    Jeoffrey

  • Multi planning area

    Hi Gurus,
    I have no access to the system at the moment.
    Can I create a new multiplanning area using an existing cube used in another multiplanning area already ?
    Please advise.
    Thanks
    Sanjay

    Dear sanjay,
    as above mentioned, you can go for what you want exactly.
    actually, for one cube you can have only one planning area.
    with help of multiplanning area you can use the same cube multiple times.
    hope this will help you.
    Regards
    Vinay

  • Regenearate Planning area

    Hi Friends,
    Please calrify the following issue.
    Let me explain my problem.
    When we exucute the planning folder in the developement system we are getting short dump in the SAP generated program. It is running fine in the Quality and Production system.
    I contacted SAP they suggested me follow the OSS note: 781371
    SAP suggested me:
    You regenerate the planning area which you are using in the planning
    folder for which you are getting this dump.
    OSS note: 781371 Steps:
    1. Execute the UPC_DELETE_CLASSES function module in transaction SE37. The function module has the I_AREA parameter, which you must enter. Here you must enter the technical key of the planning area.
    2. Execute the UPC_GENERATE_AREA function module in transaction SE37. The function module has the I_AREA parameter, which you must enter. Here you must enter the technical key of the planning area.
    So my question is:
    If  i execute the both above function modules i need to give the plannin area.
    So my planning folder is using the Multi planning area which includes 7 basic planning areas.
    shall i proceed with thses steps or not.
    My main concern is it is multi planning area . If i regenerate the multiplanning area does it any impact on others in other objects.
    Please suggest me whether i can regenerate the multi planning area?
    I f regenerate what are the things i need to take care before regenerating the multiplanning area?
    Please suggest me how to handle this issue.
    Please provide me your valuable suggestions.
    It would be great help for me.
    Will assign the points.
    Thanks
    SAP

    If i execute the both above function modules i need to give the plannin area.
    So my planning folder is using the Multi planning area which includes 7 basic planning areas.
    shall i proceed with thses steps or not.
    I suggest you execute this for the areas on which your objects in the folders are developed from; if they are from the multi areas, then run this is for multi area.
    My main concern is it is multi planning area . If i regenerate the multiplanning area does it any impact on others in other objects.
    It may.
    I suggest you send a message back to SAP seeking whether to run the FM for the basic area or for multi area.
    Ravi Thothadri

  • I am not able to see the entire planning area in bw3.5 bps?

    HI All,
    I happened to click on the planning profile And hence only that planning profile related planning areas are now visible on the BPSO tcode.
    How do i view all the Planning areas created by different users.
    How to unchange the planning profile so that i can view all the planning areas.
    Thanks
    Pooja

    Hi Pooja,
    If you goto Edit from Menu bar, there you will find the General Overview option, if you click on that you can see other planning areas also.
    Hope this helps.
    Veerendra.

  • Delete Planning Book

    Hi All,
    I created planning area and planning books for testing. Since they were not required anymore I decided to delete all. I assumed that when I delete planning area it deletes planning book as well. but that did not happen. Now planning area is deleted but i still see planning book in interactive planning.
    Please let me know how do I delete this planning book since when try using standard planning book T code to delete it give me error message " planning area does not exists"
    Regards,
    Harshil Desai

    Thanks all for your response.
    @ Aparna: When you delete planning area system deletes all dependent objects like planning book/data view.
    In my case when I deleted planning area, system did not delete planning books because planning book/data view was locked by status "change by author only".
    @ Rajesh: Awarding full points for hint. I could have delete the record completely but I took different rout be changing user name in table entry for respective planning book and then I deleted planning book from standard planning book transaction.
    Regards,
    Harshil Desai

Maybe you are looking for