Can we trim multiple clips in Premiere Pro CC?

Hi all, we're looking for a way to perform a ripple edit of multiple clips in the same track of the same timeline. In other words I want to trim the last 15 frames from each of 100 clips in a project (for multiple projects per day). Any ideas on how this can be done (aside from doing them one at a time)?
I saw the discussion from 2011 indicating that this could not be done in CS5.5 but perhaps there is some way in CC?
Thanks!

Some suggest a High Pass filter on 20Hz... any confirmations?

Similar Messages

In imovie can you trim multiple clips at a time? Also, can you randomly sort the photos?

In imovie can you trim multiple clips at a time? Also, can you randomly sort the photos?

Can I do all at once or 1 at a time? It seems to only allow 1 at a time.
No. But you can do one, copy its settings, then seclect the rest and "Paste Audio Settings" to all of them all at once in a project.

How can I align multiple titles in Premiere Pro?

We are working on a video (obviously) and we have a bullet list that we'd like to come up as the speaker is naming off specific items. So far we have created a separate title for each bullet point, so that we can control when the bullets fade in. The issue we're having is that we have to eyeball the alignment right now and it's not always accurate. So i'm looking for some help. How can I select multiple titles in the timeline and right align them - OR - is there a way to have all of these bullet points in one title and still maintain control of when they fade in and out?

This technique will only work with current versions of PPro - it looks harder to do than it actually is:
Create the title with all the bullet points, aligned as you wish, in the Title Tool.
Exit the title tool, the title you just created will appear in your project.
Click on the title to select it (if it is not already selected) and then go to the menu Edit > Duplicate.
Repeat the duplication process to make as many copies as number of bullet points you want to transition on.
Place the first copy of the title where you want the Title to appear in your video.
Double click on the clip of the title on the timeline to re-open the Title Tool. Delete all the text except the first line.
Now place the second copy where you want it to appear in the video.
Double click on it to re-enter the Title Tool, and delete all the text except the first two lines.
Repeat this process for as many bullet points as you have, delating one fewer bullet point each time. You can add transitions at the cut points between the titles (such as a dissolve) to make the next bullet point appear as you wish.
If you try to to this using an early version of PPro this will not work as the titles and its copies are linked - so if you change one of the copies, it changes all the other titles. Fortunately this has been fixed in the current version.
MtD

I can not copy a transition between multiple clips in premiere 12

Following the procedure described in the manual, I can not copy a transition between multiple clips in Premiere 12.
Premiere copy a single transition in the clip closer to the time bar.
I had tried in various ways but to no avail. The problem can be solved?
Thanks for the help.

Sig. T.T. Romano,
javascript:void(0)
I finally figured out that you can not copy a transition between multiple clips at the same time and it will copy one at a time.
What seems strange, however, because in Pinnacle, which I used until recently, this could be done, and Adobe is not less than Pinnacle.
Maybe Adobe does not consider interesting this thing, or maybe it is inserted in Premiere Pro. How, for example, in the titles, the ability to animate multiple lines. In Premiere Elements missing but I knew that in the Pro's.
I thank you anyway for your helpful answers.
Vincent Chiti

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

Bulk trim multiple clips

Hi,
My workflow is quite straight forward: log and transfer AVCHD material into FCP 7 by setting in- and out points; then selet all clips and put them on in the sequence (no need to change the order).
I'm looking for a way to trim multiple clips in one batch. With log and transfer I selected my raw (about 200 clips) material and I need lets say about 10 frames on both sites of all clips to set cross dissolves between clips on my sequence.
By doing so I've a default trim of 10 frames on both sites of each clip which a can change for particular clips if needed. I would save me quite some time since right now I trim all clips individually
Any tips?

If you logged and transferred the clips using the actual timecode you wanted to use, and then told FCP to add 10 second handles, it would have set in and out points where you wanted them, the handles in tact, so you could add your transitions. Something to think about for the future.
As far as your current issue goes, I can offer only a workaround solution that will be faster than setting in and out points for every clip.
Start with your playhead at the beginning of the timeline.
1. Put 20 seconds of slug in the viewer.
2. Add a track to the top of your sequence, and two audio tracks to the bottom.
3. Set the source/destination to the blank tracks (left side of the Timeline window - v1 connected to V2, and a1, a2 to A3, A4 for example).
4. Press the down arrow to move to the next edit point.
5. Press F10 to perform an overwrite edit. (Or whatever keystroke you've programmed to be overwrite edit.)
6. Repeat steps 4 and 5 until you have your slug at every edit point.
7. Press T once to switch to the "select track forward tool".
8. Click to the left of the fist slug, on the track that they lie.
9. Type -10. (that's "minus, ten, period") and press return. (This will move all of the slug backwards 10 seconds - don't forget the period.)
10. Shift drag the slug down into the track you want to trim.
11. Press delete (to remove the slug, leaving track gaps between the trimmed clips).
12. Put your playhead at the beginning of the sequence, then select all of the clips in the timeline and drag them to the CANVAS WINDOW - drop them on the INSERT drop zone.
13. Delete everything after the last intended track in your timeline.
It seems like a lot of steps, but that's just because I'm trying to be as detailed as possible. It's actually a very fast way to do it.
Other than that, I don't know of a way to bulk-set in/out points.

What do the zig zag lines mean on a clip in Premiere pro?

What do the zig zag lines mean on a clip in Premiere pro? And how do I fix it as I can't see a video image for that clip?

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Review the NEW ITEMS process link in reply page #5 in The PPro/Encore tutorial list http://forums.adobe.com/message/2276578 to be sure your sequence and video match

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Can you avoid multiple clips of the same media in a project

We have 2 suites and we sometimes work together on a common project utilising the same media.
If I want to use a sequence from the other suite I can easily import it.
The problem: it creates another folder with clips that only belong to the imported sequence.
The end result after a few imported sequences is that my final timeline has instances in it that
are from clips belonging to several different folders or bins even though the media is the same.
In summary... is there a way you can avoid having multiple clips of the same media in a project.
Makes for a very messy project when you have finished.
You've got multiple clips with the same name scattered everywhere.
Cheers

Not yet.
I'm kind of hoping this type of media management will be vastly improved in CS6, whose main new 'feature' reeeeeally needs to be outstanding network collaboration with other editors working on the same project.

Can't import prores files into Premiere Pro CC or SpeedGrade CC

Can't import prores files into Premiere Pro CC or SpeedGrade CC. But I can into After Effects CC.
I also can't export to DNxHD files to an MXF file either.
I do have latest Quicktime Pro installed and I also have Avid Media Composer and the other pieces of the Avid package.
Conflict?

I only have one account on the computer and it has Administrator priveleges. What I am doing to make it work is opening the application using the "Run as Administrator" command (e.g., right click application shortcut on desktop, choose "Run as Administrator"). I am not a Windows guru but I would guess there is something different between opening an Application with a user that has Administrator priveleges and opening an Application choosing "Run as Administrator". Also, your answer still does not address the fact that I can't use my jog wheel.
Anyone else have some ideas?

How can I un-install my adobe premiere Pro CC 2014, I can not do this in the normal way because this program is not in the UN-INSTALL list?

How can I un-install my adobe premiere Pro CC 2014, I can not do this in the normal way because this program is not in the UN-INSTALL list?

http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

Where can I download and install Adobe Premiere Pro CS4

Hi
I would like to know where can I download and install Adobe Premiere Pro CS4. Would you send me the link install imm please??
Thanks

Check this link , it may help
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Please do read the instruction properly , do avoid the error "Access Denied"

Completely Broken Playback/Multiple Crashes after Premiere Pro CC 14 Update

I am experiencing a critical error when using the updated version of Premiere Pro CC 14 (Build 8.1.0). When scrubbing through a basic timeline (of any project) I am having trouble even navigating my timeline without crashing my project. When I try to cue playback or render playback, I am met with crunchy audio (even when using different types of audio files, wav, flac, mp3, etc) or the audio is choppy, or it does not playback at all and has completely dropped out. This will also happen with the video from time to time.
I have found the best way to make this update of Premiere crash is to push play in my timeline and move my marker back in time repeatedly. After about 4-5 movement, it will crash. If I jump anywhere in the timeline, the playback with both the video and audio is choppy and drops out. I will try to post a video of this later if my description is not doing it justice.
I am working on a 12 core Mac Pro (2.4 GHz 6 Core Intel x 2) with 20 GB of Ram. I am editing locally. I have an ATI card. I have the most current update of my CUDA drivers. I have tried to change the playback settings, audio and audio hardware settings to the best of my knowledge to help resolve the problem but nothing seems to work. I have also toggled between the MPBE settings when creating a new project to see if this was the issue, it does not seem to be helping in any way.
This update has completely brought my work day to a halt and it is critical that I resolve this issue as soon as possible. An update should not make things worse! I was not having any issues until I updated.
I've attached some screenshots and can post the error report (it's very long so I won't put it in this initial post).
Thanks for the help!

Hi Ryan,
ryanghills wrote:
I have an ATI card. I have the most current update of my CUDA drivers.
If you have an ATI card, then why are CUDA drivers installed? Do you use Resolve? Can you try removing them? Avoid installing NVIDIA CUDA drivers on computers with AMD GPUs Though a bug was fixed in 8.0, it may have resurfaced in 8.1. This would be worth testing.
ryanghills wrote:
An update should not make things worse! I was not having any issues until I updated.
Premiere Pro CC 2014.1 is a major release. As a user, you have to be aware of things like:
Is your GPU driver is compatible with your system? You might need to update the driver.
Are your third party plug-ins compatible with the new version of Premiere Pro? They might not be.
Are your preferences corrupt? You might try resetting preferences.
Are disk permissions current? You may need to repair disk permissions.
Another big issue is that some of the permissions folders may be set to Read Only by OS X. Can you check that out? Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
Also, give us more info on your system. I see an AJA preset in there: FAQ: What information should I provide when asking a question on this forum?
Thanks,
Kevin

How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

Hello,
The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5. I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top. The closest that I got was to nest the sequence, but that's not what I really want.
I'd like to merge all the short clips into one single (long) audio file to use under the video.
Thoughts are welcome and greatly appreciated.
Thanks,
-Melvin

O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
Go to the File Menu> Export Media
You will be given all the Export Options. Choose Wave File
Select option for Export Work Area.
Choose where to export the file to ( HD location)
follow your nose from there....
http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

Can't import audio from clip into Premiere Pro CC.

I can export a clip, with audio, from Premiere Pro, but when I import it back into PP the audio track is missing. I noticed that when I delete the .xmp file from the file folder the audio will import with the clip successfully. Can someone please instruct me as to how I can edit the .xmp file so as to correct this problem? Thanks.

I export a clip using the "match sequence settings".
Mmm, don't ever use that. It's for people who don't know what they're doing, and often causes more problems that it solves.
Better to know what you're doing and set up your export manually. Try that, then report back what happens.

Can we trim multiple clips in Premiere Pro CC?

Similar Messages

Maybe you are looking for